This change adds support of ARC ISAv2 processors in
OpenWRT toolchain.
In general gcc for ARC may compile code for both ISA versions
simultaneously but libgcc will be built only for default
architecture that's why it's necessary to specify --with-cpu
on gcc configuration.
As for uClibc we need to use different configurations for
different ARC ISAs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48739
This includes binutils, gcc, gdb and uClibc-ng.
Latest release of ARC gcc (as of today it is "arc-2015.06")
is based on upstream gcc 4.8.4.
Sources are available on GitHub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/gcc
Latest release of ARC binutils (as of today it is "arc-2015.06")
is based on upstream binutils 2.23.
Sources are available on GitHub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06
Latest release of ARC GDB (as of today this is "arc-2015.06-gdb")
is based on upstream gdb 7.9.1.
Sources are available on GitHub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06-gdb
Note that for binutils and gdb that come from unified git repository
(which is the case for upstream binutils/gdb today) we need to disable
building of gdb in binutils and binutils in gdb hence in binutils:
------>8------
--disable-sim
--disable-gdb
------>8------
and in gdb:
------>8------
--disable-binutils
--disable-ld
--disable-gas
------>8------
Also in gdb we disable sim because if the following breakage while
building with it:
------------>8------------
/usr/bin/env bash ./../common/genmloop.sh -shell /usr/bin/env bash \
-mono -fast -pbb -switch sem5-switch.c \
-cpu a5f -infile ./mloop5.in \
-outfile-suffix 5
unknown option: bash
Makefile:699: recipe for target 'stamp-5mloop' failed
make[7]: *** [stamp-5mloop] Error 1
------------>8------------
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
SVN-Revision: 47438
2 new architectures were added in between 1.0.6 and 1.0.8 in uClibc-ng,
these are:
* lm32
* or1k
Even thought both are not yet supported in OpenWRT it's important to
disable them both in default config file otherwise user prompt will
appear during uClibc configuration asking to select desired
architecture.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Waldemar Brodkorb <wbx@uclibc-ng.org>
Cc: Mathieu Olivari <mathieu@codeaurora.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47356
Size increase is about 3-4k: this is how big xattr.os in uClibc after stripping is.
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 47271
uClibc-ng is a spin-off of original uClibc, see http://www.uclibc-ng.org/
We try to regularly add changes from uClibc to uClibc-ng.
We even sent patches and bug reports to the uClibc mailing list.
The config file is compatible between uClibc-ng 1.0 and uClibc git master.
This might change in the future.
Our main goal is to provide regularly a stable and tested release
to make embedded system developers happy.
The main advantage of uClibc-ng over olde good uClibc is regular releases
so there's no need to keep tons of patches on top of years old
0.9.33.2
Build-tested for
[1] ARM: Sunxi generic
[2] MIPS: Netgear WNDR3600/3700/3800
Run-tested for [yet out of the tree] Synopsys Designware ARC AXS101.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Waldemar Brodkorb <wbx@uclibc-ng.org>
Cc: Mathieu Olivari <mathieu@codeaurora.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47077
uClibc doesn't define signal info for the SIGSYS signal which is issued
in case of hitting a syscall prohibited by seccomp.
This is sad as it makes debugging seccomp filter policies impossible on
some architectures (at least ARM and PowerPC, maybe also others) which
do not coincidentally set si_value.sival_int as the syscall number.
To fix this, import the definitions and macros needed from glibc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45720
Patch from the uClibc master.
Fixes the package fastd on PowerPC.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44694
Introduce configuration options to build an "hardened" OpenWRT.
Options to enable Stack-Smashing Protection, FORTIFY_SOURCE and RELRO
have been introduced.
uClibc makefile now automatically detects if SSP support is necessary.
hostapd makefile has been fixed to use "^" as sed separator since
using a comma was problematic when using "-Wl,-z,now" and the like in
TARGET_CFLAGS.
Currently enabling SSP on user space depends on enabling SSP kernel
side, this is due to the fact that TARGET_CFLAGS are used to build
kernel modules (at least). Suggestions on how to avoid this are welcome.
Using "select" instead of "depends on" doesn't seem to work with choice
entries.
Tested with a lantiq (WBMR) router, GCC 4.8, uClibc and a subset of
the available packages.
Needs to be tested with GCC 4.9 and the remaining packages.
PIE not currently included.
Signed-off-by: Alessandro Di Federico <ale+owrt@clearmind.me>
SVN-Revision: 44005
When building with CONFIG_BUILD_NLS=y, uClibc fails to compile with following
message (or similar, according to https://dev.openwrt.org/ticket/13095):
-snip-
...
Warning: adding UNDEFINED entry for ar_AE
Warning: adding UNDEFINED entry for am_ET
Warning: adding UNDEFINED entry for af_ZA
grep "^#define" extra/locale/locale_tables.h > extra/locale/lt_defines.h
grep "^#define __lc" extra/locale/locale_collate.h >> extra/locale/lt_defines.h
gcc extra/locale/gen_wctype.c -o extra/locale/gen_wctype -Os -Wall -D__UCLIBC_GEN_LOCALE -I./
extra/locale/gen_wctype.c: In function 'main':
extra/locale/gen_wctype.c:684:2: warning: #warning fix the upper bound on the upper/lower tables... save 200 bytes or so [-Wcpp]
for locale in en_US en_GB; do \
extra/locale/gen_wctype $locale > extra/locale/wctables.h || \
extra/locale/gen_wctype $locale.UTF-8 > extra/locale/wctables.h || \
extra/locale/gen_wctype $locale.iso8859-1 > extra/locale/wctables.h && break; \
done
make[4]: *** [extra/locale/wctables.h] Error 1
-snap-
This seems to also depend on the host system used, e.g. running a fresh
checkout on a Debian 7.6 system triggered this error, while running the
very same stuff on an Ubuntu 12.10 Quantal Quetzal does not trigger it.
This is the configuration I used:
-snip-
buildbot@buildbot:~/openwrt-nls.git$ scripts/diffconfig.sh
CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_Default=y
CONFIG_DEVEL=y
CONFIG_BUILD_NLS=y
CONFIG_DOWNLOAD_FOLDER="/srv/downloads/downloads"
-snap-
In the ticket mentioned above, a patch is referenced which solves this issue.
Note, that this issue is also present on 14.07.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43446
Without this patch, selecting "Compile with full language support"
results in the following question during build:
...
Locale Support (UCLIBC_HAS_LOCALE) [Y/n/?] y
Locale data
> 1. All locales (UCLIBC_BUILD_ALL_LOCALE) (NEW)
2. Only selected locales (UCLIBC_BUILD_MINIMAL_LOCALE) (NEW)
3. Use Pre-generated Locale Data (UCLIBC_PREGENERATED_LOCALE_DATA) (NEW)
choice[1-3]:
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43445
This patch adds missing architecture-specific headers for use with
eventfd(2). Fixes#16679.
Signed-off-by: Luis Dallos <ld@nkvd.ignorelist.com>
SVN-Revision: 42916
A small system like the common home router doesn't have 40 MiB per process for
a dirty stack cache. This can easily lead to an overbooking OOM problem and
caused a lot of hangs+reboots on 32 MiB systems running nodogsplash.
Not using a stack cache can increase the time to spawn new threads. This is
hopefully no problem for system not running a lot of parallel computations.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 38851
For now, build uclibc without -mips16. There's no mips16 syscall
support AFAIK and uclibc uses inline assembly syscalls a lot.
In addition, touching errno means touching a TLS model symbol, and
that's not supported in gcc 4.6.
The __set_errno macro can be put back to calling
errno_location(). This allows much of the library to be built in
mips16 mode. I don't understand the implications to the thread library
of doing this.
A list of "build as -mno-mips16" C source files can be placed in the
mips architecture-dependent build files. Maintaining the list would be
no fun.
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36199
John Crispin
Felix Fietkau
Jonas Gorski
Steven Barth
Nicolas Thill
Luka Perkov
Imre Kaloz
Florian Fainelli