dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ramips: rename TP-Link Archer C20 to TP-Link Archer C20 v1

Browse Source 
This changes device name from "TP-Link Archer C20" to "TP-Link Archer C20 v1"
because of TPLINK released new TP-Link Archer C20 v4. Additionally
migration to the generic board detection has been made.

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
v19.07.3_mercusys_ac12_duma
Maxim Anisimov 6 years ago committed by Mathias Kresin
parent 6c56e968c1
commit ff1e895530
7 changed files with 37 additions and 39 deletions
Show Stats Download Patch File Download Diff File

12
target/linux/ramips/base-files/etc/board.d/01_leds
Unescape Escape View File

@ -91,12 +91,6 @@ c108)
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
;;
c20)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
set_usb_led "$boardname:blue:usb"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
;;
c20i)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
@ -388,6 +382,12 @@ tl-wr841n-v13)
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
tplink,c20-v1)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
set_usb_led "$boardname:blue:usb"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
;;
tplink,tl-mr3420-v5)
set_usb_led "$boardname:green:usb"
set_wifi_led "$boardname:green:wlan"

4
target/linux/ramips/base-files/etc/board.d/02_network
Unescape Escape View File

@ -190,8 +190,8 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
;;
c20|\
c50)
c50|\
tplink,c20-v1)
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
;;

2
target/linux/ramips/base-files/etc/diag.sh
Unescape Escape View File

@ -124,7 +124,6 @@ get_status_led() {
w502u)
status_led="$boardname:blue:wps"
;;
c20|\
d240|\
dap-1350|\
na930|\
@ -136,6 +135,7 @@ get_status_led() {
rt-n14u|\
rt-n15|\
rt-n56u|\
tplink,c20-v1|\
wl-330n|\
wl-330n3g|\
wli-tx4-ag300n|\

3
target/linux/ramips/base-files/lib/ramips.sh
Unescape Escape View File

@ -85,9 +85,6 @@ ramips_board_detect() {
*"C108")
name="c108"
;;
*"C20")
name="c20"
;;
*"C20i")
name="c20i"
;;

2
target/linux/ramips/base-files/lib/upgrade/platform.sh
Unescape Escape View File

@ -237,10 +237,10 @@ platform_check_image() {
}
return 0
;;
c20|\
c20i|\
c50|\
mr200|\
tplink,c20-v1|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\

25
target/linux/ramips/dts/ArcherC20.dts → target/linux/ramips/dts/ArcherC20v1.dts
Unescape Escape View File

@ -6,8 +6,8 @@
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "tplink,c20", "ralink,mt7620a-soc";
model = "TP-Link Archer C20";
compatible = "tplink,c20-v1", "ralink,mt7620a-soc";
model = "TP-Link Archer C20 v1";
chosen {
bootargs = "console=ttyS0,115200";
@ -17,43 +17,43 @@
compatible = "gpio-leds";
lan {
label = "c20:blue:lan";
label = "c20-v1:blue:lan";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
power {
label = "c20:blue:power";
label = "c20-v1:blue:power";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
usb {
label = "c20:blue:usb";
label = "c20-v1:blue:usb";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
wan {
label = "c20:blue:wan";
label = "c20-v1:blue:wan";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
wan_orange {
label = "c20:orange:wan";
label = "c20-v1:orange:wan";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "c20:blue:wlan5g";
label = "c20-v1:blue:wlan5g";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "c20:blue:wlan2g";
label = "c20-v1:blue:wlan2g";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
wps {
label = "c20:blue:wps";
label = "c20-v1:blue:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
@ -74,7 +74,8 @@
label = "rfkill";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
}; };
};
};
};
&gpio1 {
@ -178,7 +179,7 @@
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&radio 32768>;
mediatek,mtd-eeprom = <&radio 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
mtd-mac-address = <&rom 0xf100>;
mtd-mac-address-increment = <(-1)>;

28
target/linux/ramips/image/mt7620.mk
Unescape Escape View File

@ -45,20 +45,6 @@ define Device/Archer
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata
endef
define Device/ArcherC20
$(Device/Archer)
DTS := ArcherC20
SUPPORTED_DEVICES := c20
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc2000001
TPLINK_HWREV := 0x44
TPLINK_HWREVADD := 0x1
IMAGES += factory.bin
DEVICE_TITLE := TP-Link ArcherC20
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += ArcherC20
define Device/ArcherC20i
$(Device/Archer)
DTS := ArcherC20i
@ -433,6 +419,20 @@ define Device/tiny-ac
endef
TARGET_DEVICES += tiny-ac
define Device/tplink_c20-v1
$(Device/Archer)
DTS := ArcherC20v1
SUPPORTED_DEVICES := c20v1
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc2000001
TPLINK_HWREV := 0x44
TPLINK_HWREVADD := 0x1
IMAGES += factory.bin
DEVICE_TITLE := TP-Link ArcherC20 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_c20-v1
define Device/vonets_var11n-300
DTS := VAR11N-300
IMAGE_SIZE := $(ralink_default_fw_size_4M)

Write Preview
Loading…
Cancel
Save