Add new package for configuring 6rd tunnels.
This patch adds support for manually configuring 6rd tunnels. It depends on
the netifd patches I sent earlier, which add 6rd support.
A basic interface configuration looks like:
config interface 'wan6'
option proto '6rd'
option peeraddr '192.0.2.1'
option ip6prefix '2123::'
option ip6prefixlen '16'
option ip4prefixlen '0'
Where ip4prefixlen is optional and actually defaults to 0, which would use all
bits of the IPv4 in the calculated IPv6 subnet.
I believe it should be possible to configure a regular 6to4 tunnel using this,
and that we may want to merge the two eventually, but there are some larger
differences between the two at the moment:
- 6rd addresses can be more difficult to calculate. My ISP, for example, has
a setup with a v6 mask of 43 bits, and a v4 mask of 19.
- 6to4 has support for configuring radvd. This is something we want, of
course, but it seems best to deal with this in a separate patch.
Just creating a new package looked like the quickest way to get this in.
This work is based on the 6in4 package, and work by Stijn Tintel.
Signed-off-by: Stéphan Kochen <stephan@kochen.nl>
SVN-Revision: 32431
v19.07.3_mercusys_ac12_duma
Jo-Philipp Wich
12 years ago
parent
985eab3706
commit
fdfffd0fbe
@ -0,0 +1,55 @@
|
||||
#
|
||||
# Copyright (C) 2010-2012 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
include $(TOPDIR)/rules.mk
|
||||
|
||||
PKG_NAME:=6rd
|
||||
PKG_VERSION:=1
|
||||
PKG_RELEASE:=1
|
||||
|
||||
include $(INCLUDE_DIR)/package.mk
|
||||
|
||||
define Package/6rd
|
||||
SECTION:=ipv6
|
||||
CATEGORY:=IPv6
|
||||
DEPENDS:=+kmod-ipv6 +kmod-sit
|
||||
TITLE:=6rd configuration support
|
||||
MAINTAINER:=Stéphan Kochen <stephan@kochen.nl>
|
||||
PKGARCH:=all
|
||||
endef
|
||||
|
||||
define Package/6rd/description
|
||||
Provides support for 6rd tunnels in /etc/config/network.
|
||||
Refer to http://wiki.openwrt.org/doc/uci/network for
|
||||
configuration details.
|
||||
endef
|
||||
|
||||
define Build/Prepare
|
||||
mkdir -p $(PKG_BUILD_DIR)
|
||||
$(CP) ./src/* $(PKG_BUILD_DIR)/
|
||||
endef
|
||||
|
||||
define Build/Configure
|
||||
endef
|
||||
|
||||
define Build/Compile
|
||||
$(MAKE) -C $(PKG_BUILD_DIR) \
|
||||
CC="$(TARGET_CC)" \
|
||||
CFLAGS="$(TARGET_CFLAGS) -Wall" \
|
||||
LDFLAGS="$(TARGET_LDFLAGS)"
|
||||
endef
|
||||
|
||||
define Package/6rd/install
|
||||
$(INSTALL_DIR) $(1)/usr/sbin
|
||||
$(INSTALL_BIN) $(PKG_BUILD_DIR)/6rdcalc $(1)/usr/sbin/
|
||||
$(INSTALL_DIR) $(1)/lib/netifd/proto
|
||||
$(INSTALL_BIN) ./files/6rd.sh $(1)/lib/netifd/proto/6rd.sh
|
||||
$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
|
||||
$(INSTALL_DATA) ./files/6rd.hotplug $(1)/etc/hotplug.d/iface/92-6rd
|
||||
endef
|
||||
|
||||
$(eval $(call BuildPackage,6rd))
|
||||
@ -0,0 +1,29 @@
|
||||
#!/bin/sh
|
||||
|
||||
if [ "$ACTION" = ifup ]; then
|
||||
. /lib/functions.sh
|
||||
|
||||
INCLUDE_ONLY=1
|
||||
. /lib/netifd/proto/6rd.sh
|
||||
|
||||
include /lib/network
|
||||
scan_interfaces
|
||||
|
||||
update_tunnel() {
|
||||
local cfg="$1"
|
||||
|
||||
local proto
|
||||
config_get proto "$cfg" proto
|
||||
[ "$proto" = 6rd ] || return 0
|
||||
|
||||
local wandev
|
||||
config_get wandev "$cfg" wan_device "$(find_6rd_wanif)"
|
||||
[ "$wandev" = "$DEVICE" ] || return 0
|
||||
|
||||
local wanip=$(find_6rd_wanip "$wandev")
|
||||
|
||||
[ -n "$wanip" ] && ifup "$cfg"
|
||||
}
|
||||
|
||||
config_foreach update_tunnel interface
|
||||
fi
|
||||
@ -0,0 +1,83 @@
|
||||
#!/bin/sh
|
||||
# 6rd.sh - IPv6-in-IPv4 tunnel backend
|
||||
# Copyright (c) 2010-2012 OpenWrt.org
|
||||
|
||||
[ -n "$INCLUDE_ONLY" ] || {
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/network.sh
|
||||
. ../netifd-proto.sh
|
||||
init_proto "$@"
|
||||
}
|
||||
|
||||
tun_error() {
|
||||
local cfg="$1"; shift;
|
||||
|
||||
[ -n "$1" ] && proto_notify_error "$cfg" "$@"
|
||||
proto_block_restart "$cfg"
|
||||
}
|
||||
|
||||
proto_6rd_setup() {
|
||||
local cfg="$1"
|
||||
local iface="$2"
|
||||
local link="6rd-$cfg"
|
||||
|
||||
local mtu ttl ipaddr peeraddr ip6prefix ip6prefixlen ip4prefixlen
|
||||
json_get_vars mtu ttl ipaddr peeraddr ip6prefix ip6prefixlen ip4prefixlen
|
||||
|
||||
[ -z "$ip6prefix" -o -z "$peeraddr" ] && {
|
||||
tun_error "$cfg" "MISSING_ADDRESS"
|
||||
return
|
||||
}
|
||||
|
||||
[ -z "$ipaddr" ] && {
|
||||
local wanif
|
||||
if ! network_find_wan wanif || ! network_get_ipaddr ipaddr "$wanif"; then
|
||||
tun_error "$cfg" "NO_WAN_LINK"
|
||||
return
|
||||
fi
|
||||
}
|
||||
|
||||
# Determine the relay prefix.
|
||||
local ip4prefixlen="${ip4prefixlen:-0}"
|
||||
local ip4prefix=$(ipcalc.sh "$ipaddr/$ip4prefixlen" | grep NETWORK)
|
||||
ip4prefix="${ip4prefix#NETWORK=}"
|
||||
|
||||
# Determine our IPv6 address.
|
||||
local ip6subnet=$(6rdcalc "$ip6prefix/$ip6prefixlen" "$ipaddr/$ip4prefixlen")
|
||||
local ip6addr="${ip6subnet%%::*}::1"
|
||||
|
||||
proto_init_update "$link" 1
|
||||
proto_add_ipv6_address "$ip6addr" "$ip6prefixlen"
|
||||
proto_add_ipv6_route "::" 0 "::$peeraddr"
|
||||
|
||||
proto_add_tunnel
|
||||
json_add_string mode sit
|
||||
json_add_int mtu "${mtu:-1280}"
|
||||
json_add_int ttl "${ttl:-64}"
|
||||
json_add_string local "$ipaddr"
|
||||
json_add_string 6rd-prefix "$ip6prefix/$ip6prefixlen"
|
||||
json_add_string 6rd-relay-prefix "$ip4prefix/$ip4prefixlen"
|
||||
proto_close_tunnel
|
||||
|
||||
proto_send_update "$cfg"
|
||||
}
|
||||
|
||||
proto_6rd_teardown() {
|
||||
local cfg="$1"
|
||||
}
|
||||
|
||||
proto_6rd_init_config() {
|
||||
no_device=1
|
||||
available=1
|
||||
|
||||
proto_config_add_int "mtu"
|
||||
proto_config_add_int "ttl"
|
||||
proto_config_add_string "peeraddr"
|
||||
proto_config_add_string "ip6prefix"
|
||||
proto_config_add_string "ip6prefixlen"
|
||||
proto_config_add_string "ip4prefixlen"
|
||||
}
|
||||
|
||||
[ -n "$INCLUDE_ONLY" ] || {
|
||||
add_protocol 6rd
|
||||
}
|
||||
@ -0,0 +1,126 @@
|
||||
/*
|
||||
* Utility used to calculate the 6rd subnet.
|
||||
*
|
||||
* Copyright 2012, Stéphan Kochen <stephan@kochen.nl>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <sys/errno.h>
|
||||
#include <arpa/inet.h>
|
||||
#include <netinet/in.h>
|
||||
|
||||
#define INET_PREFIXSTRLEN (INET_ADDRSTRLEN+3)
|
||||
#define INET6_PREFIXSTRLEN (INET6_ADDRSTRLEN+4)
|
||||
|
||||
static void print_usage()
|
||||
{
|
||||
fprintf(stderr, "Usage: 6rdcalc <v6 prefix>/<mask> <v4 address>/<mask>\n");
|
||||
exit(1);
|
||||
}
|
||||
|
||||
static void print_error()
|
||||
{
|
||||
fprintf(stderr, "%s", strerror(errno));
|
||||
exit(1);
|
||||
}
|
||||
|
||||
static void parse_str(int af, char *str, void *addr, unsigned long *mask)
|
||||
{
|
||||
int ret;
|
||||
char *slash;
|
||||
|
||||
/* Split the address at the slash. */
|
||||
if ((slash = strchr(str, '/')) == NULL)
|
||||
print_usage();
|
||||
*slash = '\0';
|
||||
|
||||
/* Parse the address. */
|
||||
if ((ret = inet_pton(af, str, addr)) != 1) {
|
||||
if (ret == 0)
|
||||
print_usage();
|
||||
else
|
||||
print_error();
|
||||
}
|
||||
|
||||
/* Parse the mask. */
|
||||
*mask = strtoul(slash+1, NULL, 10);
|
||||
if ((af == AF_INET && *mask > 32) ||
|
||||
(af == AF_INET6 && *mask > 128))
|
||||
print_usage();
|
||||
}
|
||||
|
||||
int main(int argc, const char **argv)
|
||||
{
|
||||
char v6str[INET6_PREFIXSTRLEN], v4str[INET_PREFIXSTRLEN];
|
||||
struct in6_addr v6;
|
||||
struct in_addr v4;
|
||||
unsigned long v6it, v4it, mask;
|
||||
unsigned char *byte4, *byte6;
|
||||
unsigned char bit4, bit6;
|
||||
|
||||
/* Check parameters. */
|
||||
if (argc != 3)
|
||||
print_usage();
|
||||
|
||||
/* Parse the v6 address. */
|
||||
strncpy(v6str, argv[1], INET6_PREFIXSTRLEN);
|
||||
v6str[INET6_PREFIXSTRLEN-1] = '\0';
|
||||
parse_str(AF_INET6, v6str, &v6, &v6it);
|
||||
|
||||
/* Parse the v4 address */
|
||||
strncpy(v4str, argv[2], INET_PREFIXSTRLEN);
|
||||
v6str[INET_PREFIXSTRLEN-1] = '\0';
|
||||
parse_str(AF_INET, v4str, &v4, &v4it);
|
||||
|
||||
/* Check if the combined mask is within bounds. */
|
||||
mask = (32 - v4it) + v6it;
|
||||
if (mask > 128)
|
||||
print_usage();
|
||||
|
||||
/* Combine the addresses. */
|
||||
while (v4it < 32) {
|
||||
byte6 = (unsigned char *)(&v6.s6_addr) + (v6it >> 3);
|
||||
byte4 = (unsigned char *)(&v4.s_addr) + (v4it >> 3);
|
||||
bit6 = 128 >> (v6it & 0x07);
|
||||
bit4 = 128 >> (v4it & 0x07);
|
||||
|
||||
if (*byte4 & bit4)
|
||||
*byte6 |= bit6;
|
||||
else
|
||||
*byte6 &= ~bit6;
|
||||
|
||||
v4it++; v6it++;
|
||||
}
|
||||
|
||||
/* Clear remaining bits. */
|
||||
while (v6it < 128) {
|
||||
byte6 = (unsigned char *)(&v6.s6_addr) + (v6it >> 2);
|
||||
bit6 = 128 >> (v6it & 0x07);
|
||||
|
||||
*byte6 &= ~bit6;
|
||||
|
||||
v6it++;
|
||||
}
|
||||
|
||||
/* Print the subnet prefix. */
|
||||
if (inet_ntop(AF_INET6, &v6, v6str, sizeof(v6str)) == NULL)
|
||||
print_error();
|
||||
printf("%s/%lu\n", v6str, mask);
|
||||
return 0;
|
||||
}
|
||||
@ -0,0 +1,7 @@
|
||||
all: 6rdcalc
|
||||
|
||||
6rdcalc: 6rdcalc.c
|
||||
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $<
|
||||
|
||||
clean:
|
||||
rm -f 6rdcalc
|
||||
Loading…
Reference in New Issue