diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 4218e3df36..7433b31078 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -4,11 +4,11 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .129 LINUX_VERSION-4.9 = .145 -LINUX_VERSION-4.14 = .87 +LINUX_VERSION-4.14 = .88 LINUX_KERNEL_HASH-3.18.129 = 8d420b58593a74109175be781da2320a341baec9aaa186da31ad508d3f377e72 LINUX_KERNEL_HASH-4.9.145 = 6901ca37e8c305a2f26c598952338b4dc2481ca5a9d0bf71e2b71730a5b5bc5e -LINUX_KERNEL_HASH-4.14.87 = 36744d7d657dab23e455a8096e4ad2dc6a25f25fdce062d8a8bdf4499112e125 +LINUX_KERNEL_HASH-4.14.88 = b0f0b8c76708eab6caf3009702e531d40a243b152922ee1f9a441316f226f52d remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1)))) sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1))))))) diff --git a/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch index a06910b816..41f9c8ac7d 100644 --- a/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch +++ b/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch @@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter #include "xhci.h" #include "xhci-trace.h" -@@ -262,6 +264,458 @@ static void xhci_pme_acpi_rtd3_enable(st +@@ -266,6 +268,458 @@ static void xhci_pme_acpi_rtd3_enable(st static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } #endif /* CONFIG_ACPI */ @@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { -@@ -297,6 +751,22 @@ static int xhci_pci_probe(struct pci_dev +@@ -301,6 +755,22 @@ static int xhci_pci_probe(struct pci_dev struct hc_driver *driver; struct usb_hcd *hcd; @@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter driver = (struct hc_driver *)id->driver_data; /* For some HW implementation, a XHCI reset is just not enough... */ -@@ -361,6 +831,16 @@ static void xhci_pci_remove(struct pci_d +@@ -365,6 +835,16 @@ static void xhci_pci_remove(struct pci_d { struct xhci_hcd *xhci; diff --git a/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch index 60e5396804..71b90f2db2 100644 --- a/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch +++ b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch @@ -13,7 +13,7 @@ produce a noisy warning. --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -215,7 +215,7 @@ static void xhci_pci_quirks(struct devic +@@ -219,7 +219,7 @@ static void xhci_pci_quirks(struct devic xhci->quirks |= XHCI_TRUST_TX_LENGTH; if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0015) @@ -44,7 +44,7 @@ produce a noisy warning. hcd->msi_enabled = 1; --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1857,6 +1857,7 @@ struct xhci_hcd { +@@ -1858,6 +1858,7 @@ struct xhci_hcd { /* support xHCI 0.96 spec USB2 software LPM */ unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ diff --git a/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch index f7dd241e2f..0108427464 100644 --- a/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ b/target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch @@ -127,11 +127,11 @@ it on BCM4708 family. /* --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1839,6 +1839,7 @@ struct xhci_hcd { - #define XHCI_SUSPEND_DELAY BIT_ULL(30) +@@ -1840,6 +1840,7 @@ struct xhci_hcd { #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) -+#define XHCI_FAKE_DOORBELL BIT_ULL(35) + #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) ++#define XHCI_FAKE_DOORBELL BIT_ULL(36) unsigned int num_active_eps; unsigned int limit_active_eps; diff --git a/target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch index 53b1a9a13c..88870bc99e 100644 --- a/target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch +++ b/target/linux/generic/pending-4.14/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch @@ -71,7 +71,7 @@ Signed-off-by: Tobias Wolf --- a/mm/page_alloc.c +++ b/mm/page_alloc.c -@@ -6151,7 +6151,7 @@ static void __ref alloc_node_mem_map(str +@@ -6141,7 +6141,7 @@ static void __ref alloc_node_mem_map(str mem_map = NODE_DATA(0)->node_mem_map; #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM) if (page_to_pfn(mem_map) != pgdat->node_start_pfn) diff --git a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch b/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch index d28993ae38..2a6f5f25d4 100644 --- a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch +++ b/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch @@ -86,7 +86,7 @@ Signed-off-by: Greg Kroah-Hartman if (!xhci->shared_hcd) { --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -273,6 +273,9 @@ static int xhci_pci_setup(struct usb_hcd +@@ -277,6 +277,9 @@ static int xhci_pci_setup(struct usb_hcd if (!xhci->sbrn) pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);