Gabor Juhos
12 years ago
parent
3269924fed
commit
fb28062182
@ -1,401 +0,0 @@
|
||||
# CONFIG_40x is not set
|
||||
# CONFIG_44x is not set
|
||||
CONFIG_6xx=y
|
||||
CONFIG_8xxx_WDT=y
|
||||
# CONFIG_ADVANCED_OPTIONS is not set
|
||||
# CONFIG_ALTIVEC is not set
|
||||
# CONFIG_AMIGAONE is not set
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
|
||||
CONFIG_ARCH_HAS_ILOG2_U32=y
|
||||
CONFIG_ARCH_HAS_WALK_MEMORY=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
|
||||
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
|
||||
CONFIG_ARCH_SUPPORTS_MSI=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_ASP834x is not set
|
||||
CONFIG_ATA=y
|
||||
CONFIG_AUDIT_ARCH=y
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
# CONFIG_BOOTX_TEXT is not set
|
||||
CONFIG_BOUNCE=y
|
||||
# CONFIG_BUG is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_COMPAT_BRK=y
|
||||
CONFIG_CONFIGFS_FS=m
|
||||
CONFIG_CRC16=m
|
||||
CONFIG_CRC7=m
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CRC_ITU_T=m
|
||||
CONFIG_CRC_T10DIF=m
|
||||
CONFIG_CRYPTO_AEAD=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_AES=y
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
CONFIG_CRYPTO_BLKCIPHER=y
|
||||
CONFIG_CRYPTO_BLKCIPHER2=y
|
||||
CONFIG_CRYPTO_CBC=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_DEFLATE=m
|
||||
CONFIG_CRYPTO_DES=m
|
||||
CONFIG_CRYPTO_DEV_TALITOS=y
|
||||
CONFIG_CRYPTO_GF128MUL=m
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_HMAC=m
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
CONFIG_CRYPTO_MD5=m
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_SHA1=m
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
# CONFIG_CRYPTO_ZLIB is not set
|
||||
CONFIG_DEFAULT_CFQ=y
|
||||
CONFIG_DEFAULT_CUBIC=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
CONFIG_DEFAULT_IOSCHED="cfq"
|
||||
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
CONFIG_DEFAULT_UIMAGE=y
|
||||
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
|
||||
CONFIG_DMADEVICES=y
|
||||
# CONFIG_DMADEVICES_DEBUG is not set
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_E200 is not set
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_EMBEDDED6xx is not set
|
||||
# CONFIG_ENABLE_WARN_DEPRECATED is not set
|
||||
CONFIG_FIRMWARE_IN_KERNEL=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FORCE_MAX_ZONEORDER=11
|
||||
CONFIG_FSL_DMA=y
|
||||
CONFIG_FSL_EMB_PERFMON=y
|
||||
CONFIG_FSL_GTM=y
|
||||
CONFIG_FSL_LBC=y
|
||||
CONFIG_FSL_PCI=y
|
||||
CONFIG_FSL_PQ_MDIO=y
|
||||
CONFIG_FSL_SOC=y
|
||||
# CONFIG_FSL_ULI1575 is not set
|
||||
# CONFIG_FSNOTIFY is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_ACL=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
# CONFIG_GENERIC_IOMAP is not set
|
||||
CONFIG_GENERIC_ISA_DMA=y
|
||||
CONFIG_GENERIC_NVRAM=y
|
||||
# CONFIG_GENERIC_TBSYNC is not set
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
CONFIG_GEN_RTC=y
|
||||
# CONFIG_GEN_RTC_X is not set
|
||||
CONFIG_GIANFAR=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_DEVICE=y
|
||||
# CONFIG_HAMRADIO is not set
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
# CONFIG_HAS_RAPIDIO is not set
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IOREMAP_PROT=y
|
||||
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HZ=250
|
||||
# CONFIG_HZ_100 is not set
|
||||
CONFIG_HZ_250=y
|
||||
# CONFIG_HZ_300 is not set
|
||||
CONFIG_IFB=y
|
||||
CONFIG_INET_AH=m
|
||||
CONFIG_INET_DIAG=m
|
||||
CONFIG_INET_ESP=m
|
||||
CONFIG_INET_IPCOMP=m
|
||||
CONFIG_INET_LRO=y
|
||||
CONFIG_INET_TCP_DIAG=m
|
||||
CONFIG_INET_TUNNEL=m
|
||||
CONFIG_INET_XFRM_MODE_BEET=m
|
||||
CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET_XFRM_TUNNEL=m
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
# CONFIG_IOMMU_HELPER is not set
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_IPIC=y
|
||||
CONFIG_IP_PIMSM_V1=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
CONFIG_IP_SCTP=m
|
||||
CONFIG_IRQ_PER_CPU=y
|
||||
CONFIG_ISA_DMA_API=y
|
||||
# CONFIG_ISDN is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
# CONFIG_JFFS2_LZMA is not set
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
CONFIG_KERNEL_START=0xc0000000
|
||||
# CONFIG_KMETER1 is not set
|
||||
# CONFIG_LBDAF is not set
|
||||
CONFIG_LIBCRC32C=y
|
||||
CONFIG_LOG_BUF_SHIFT=15
|
||||
CONFIG_LOWMEM_SIZE=0x30000000
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
CONFIG_MAX_ACTIVE_REGIONS=32
|
||||
CONFIG_MDIO_BITBANG=y
|
||||
CONFIG_MDIO_GPIO=y
|
||||
# CONFIG_MMIO_NVRAM is not set
|
||||
CONFIG_MPC830x_RDB=y
|
||||
CONFIG_MPC831x_RDB=y
|
||||
CONFIG_MPC832x_MDS=y
|
||||
CONFIG_MPC832x_RDB=y
|
||||
CONFIG_MPC834x_ITX=y
|
||||
CONFIG_MPC834x_MDS=y
|
||||
CONFIG_MPC836x_MDS=y
|
||||
CONFIG_MPC836x_RDK=y
|
||||
CONFIG_MPC837x_MDS=y
|
||||
CONFIG_MPC837x_RDB=y
|
||||
CONFIG_MPC8xxx_GPIO=y
|
||||
# CONFIG_MPIC is not set
|
||||
# CONFIG_MPIC_U3_HT_IRQS is not set
|
||||
# CONFIG_MPIC_WEIRD is not set
|
||||
CONFIG_MTD_BLOCK2MTD=y
|
||||
# CONFIG_MTD_CFI is not set
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_FSL_ELBC=y
|
||||
CONFIG_MTD_NAND_FSL_UPM=y
|
||||
CONFIG_MTD_NAND_RB_PPC=y
|
||||
CONFIG_MTD_OF_PARTS=y
|
||||
# CONFIG_MTD_SM_COMMON is not set
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_RESERVE=1
|
||||
# CONFIG_MTD_UBI_DEBUG is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
# CONFIG_NEED_DMA_MAP_STATE is not set
|
||||
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
|
||||
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||
# CONFIG_NETWORK_FILESYSTEMS is not set
|
||||
CONFIG_NET_ACT_GACT=m
|
||||
CONFIG_NET_ACT_MIRRED=m
|
||||
CONFIG_NET_ACT_NAT=m
|
||||
CONFIG_NET_ACT_PEDIT=m
|
||||
CONFIG_NET_ACT_POLICE=m
|
||||
CONFIG_NET_ACT_SIMP=m
|
||||
# CONFIG_NET_ACT_SKBEDIT is not set
|
||||
CONFIG_NET_CLS_BASIC=m
|
||||
CONFIG_NET_CLS_FLOW=m
|
||||
CONFIG_NET_CLS_FW=m
|
||||
CONFIG_NET_CLS_ROUTE=y
|
||||
CONFIG_NET_CLS_ROUTE4=m
|
||||
CONFIG_NET_CLS_RSVP=m
|
||||
CONFIG_NET_CLS_RSVP6=m
|
||||
CONFIG_NET_CLS_TCINDEX=m
|
||||
CONFIG_NET_CLS_U32=m
|
||||
# CONFIG_NET_DMA is not set
|
||||
CONFIG_NET_EMATCH=y
|
||||
CONFIG_NET_EMATCH_CMP=m
|
||||
CONFIG_NET_EMATCH_META=m
|
||||
CONFIG_NET_EMATCH_NBYTE=m
|
||||
CONFIG_NET_EMATCH_TEXT=m
|
||||
CONFIG_NET_EMATCH_U32=m
|
||||
CONFIG_NET_IPGRE=m
|
||||
CONFIG_NET_IPIP=m
|
||||
CONFIG_NET_SCH_CBQ=m
|
||||
CONFIG_NET_SCH_DSMARK=m
|
||||
CONFIG_NET_SCH_GRED=m
|
||||
CONFIG_NET_SCH_HFSC=m
|
||||
CONFIG_NET_SCH_HTB=m
|
||||
CONFIG_NET_SCH_INGRESS=m
|
||||
CONFIG_NET_SCH_NETEM=m
|
||||
CONFIG_NET_SCH_PRIO=m
|
||||
CONFIG_NET_SCH_RED=m
|
||||
CONFIG_NET_SCH_SFQ=m
|
||||
CONFIG_NET_SCH_TBF=m
|
||||
CONFIG_NET_SCH_TEQL=m
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_NR_IRQS=512
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_DEVICE=y
|
||||
CONFIG_OF_DYNAMIC=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_SPI=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xc0000000
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_PATA_RB_PPC=y
|
||||
CONFIG_PCI=y
|
||||
# CONFIG_PCIEPORTBUS is not set
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYSICAL_START=0x00000000
|
||||
CONFIG_PPC=y
|
||||
CONFIG_PPC32=y
|
||||
# CONFIG_PPC64 is not set
|
||||
# CONFIG_PPC_82xx is not set
|
||||
CONFIG_PPC_83xx=y
|
||||
# CONFIG_PPC_85xx is not set
|
||||
# CONFIG_PPC_86xx is not set
|
||||
# CONFIG_PPC_8xx is not set
|
||||
# CONFIG_PPC_970_NAP is not set
|
||||
CONFIG_PPC_BOOK3S=y
|
||||
CONFIG_PPC_BOOK3S_32=y
|
||||
# CONFIG_PPC_CELL is not set
|
||||
# CONFIG_PPC_CELL_NATIVE is not set
|
||||
# CONFIG_PPC_CHRP is not set
|
||||
# CONFIG_PPC_CLOCK is not set
|
||||
# CONFIG_PPC_DCR_MMIO is not set
|
||||
# CONFIG_PPC_DCR_NATIVE is not set
|
||||
CONFIG_PPC_DISABLE_WERROR=y
|
||||
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||
CONFIG_PPC_FPU=y
|
||||
CONFIG_PPC_HAVE_PMU_SUPPORT=y
|
||||
# CONFIG_PPC_I8259 is not set
|
||||
# CONFIG_PPC_INDIRECT_IO is not set
|
||||
CONFIG_PPC_INDIRECT_PCI=y
|
||||
CONFIG_PPC_LIB_RHEAP=y
|
||||
# CONFIG_PPC_MM_SLICES is not set
|
||||
# CONFIG_PPC_MPC106 is not set
|
||||
# CONFIG_PPC_MPC512x is not set
|
||||
# CONFIG_PPC_MPC52xx is not set
|
||||
CONFIG_PPC_MPC831x=y
|
||||
CONFIG_PPC_MPC832x=y
|
||||
CONFIG_PPC_MPC834x=y
|
||||
CONFIG_PPC_MPC837x=y
|
||||
CONFIG_PPC_MSI_BITMAP=y
|
||||
CONFIG_PPC_OF=y
|
||||
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
|
||||
CONFIG_PPC_PCI_CHOICE=y
|
||||
# CONFIG_PPC_PMAC is not set
|
||||
# CONFIG_PPC_RTAS is not set
|
||||
CONFIG_PPC_STD_MMU=y
|
||||
CONFIG_PPC_STD_MMU_32=y
|
||||
CONFIG_PPC_UDBG_16550=y
|
||||
# CONFIG_PQ2ADS is not set
|
||||
CONFIG_PRINT_STACK_DEPTH=64
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_PROC_PAGE_MONITOR=y
|
||||
CONFIG_QE_GPIO=y
|
||||
CONFIG_QUICC_ENGINE=y
|
||||
CONFIG_RB_IOMAP=y
|
||||
CONFIG_RB_PPC=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
# CONFIG_SATA_FSL is not set
|
||||
# CONFIG_SBC834x is not set
|
||||
CONFIG_SCHED_HRTICK=y
|
||||
CONFIG_SCSI=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
# CONFIG_SCSI_MULTI_LUN is not set
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
# CONFIG_SCTP_DBG_MSG is not set
|
||||
# CONFIG_SCTP_DBG_OBJCNT is not set
|
||||
CONFIG_SCTP_HMAC_MD5=y
|
||||
# CONFIG_SCTP_HMAC_NONE is not set
|
||||
# CONFIG_SCTP_HMAC_SHA1 is not set
|
||||
CONFIG_SERIAL_8250_PCI=y
|
||||
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
|
||||
# CONFIG_SERIAL_OF_PLATFORM is not set
|
||||
CONFIG_SERIAL_QE=y
|
||||
CONFIG_SERIO=y
|
||||
CONFIG_SERIO_I8042=y
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
CONFIG_SERIO_PCIPS2=y
|
||||
CONFIG_SERIO_RAW=y
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
|
||||
CONFIG_SIMPLE_GPIO=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLOB=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
# CONFIG_SPI_GPIO is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_MPC8xxx=y
|
||||
# CONFIG_SQUASHFS is not set
|
||||
# CONFIG_SWAP is not set
|
||||
# CONFIG_SWIOTLB is not set
|
||||
CONFIG_TASK_SIZE=0xc0000000
|
||||
# CONFIG_TAU is not set
|
||||
CONFIG_TCP_CONG_BIC=m
|
||||
CONFIG_TCP_CONG_CUBIC=y
|
||||
CONFIG_TCP_CONG_HSTCP=m
|
||||
CONFIG_TCP_CONG_HTCP=m
|
||||
CONFIG_TCP_CONG_HYBLA=m
|
||||
CONFIG_TCP_CONG_ILLINOIS=m
|
||||
CONFIG_TCP_CONG_LP=m
|
||||
CONFIG_TCP_CONG_SCALABLE=m
|
||||
CONFIG_TCP_CONG_VEGAS=m
|
||||
CONFIG_TCP_CONG_VENO=m
|
||||
CONFIG_TCP_CONG_WESTWOOD=m
|
||||
CONFIG_TCP_CONG_YEAH=m
|
||||
CONFIG_TEXTSEARCH_BM=m
|
||||
CONFIG_TEXTSEARCH_FSM=m
|
||||
CONFIG_TEXTSEARCH_KMP=m
|
||||
# CONFIG_TIMB_DMA is not set
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_UBIFS_FS is not set
|
||||
CONFIG_UCC=y
|
||||
CONFIG_UCC_FAST=y
|
||||
CONFIG_UCC_GETH=y
|
||||
CONFIG_UCC_SLOW=y
|
||||
# CONFIG_UCC_TDM is not set
|
||||
# CONFIG_UGETH_TX_ON_DEMAND is not set
|
||||
CONFIG_VIA_VELOCITY=y
|
||||
CONFIG_VITESSE_PHY=y
|
||||
CONFIG_VITESSE_PHY_8601_SKEW=y
|
||||
CONFIG_WAN_ROUTER=m
|
||||
CONFIG_WORD_SIZE=32
|
||||
CONFIG_XFRM_IPCOMP=m
|
||||
CONFIG_YAFFS_9BYTE_TAGS=y
|
||||
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
|
||||
CONFIG_YAFFS_AUTO_YAFFS2=y
|
||||
# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
|
||||
# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
|
||||
CONFIG_YAFFS_DISABLE_TAGS_ECC=y
|
||||
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
||||
# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
|
||||
CONFIG_YAFFS_FS=y
|
||||
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
||||
CONFIG_YAFFS_XATTR=y
|
||||
CONFIG_YAFFS_YAFFS1=y
|
||||
CONFIG_YAFFS_YAFFS2=y
|
||||
@ -1,19 +0,0 @@
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -74,7 +74,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
|
||||
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
|
||||
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
|
||||
fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
|
||||
- cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
|
||||
+ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c rb600.c \
|
||||
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
|
||||
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
|
||||
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
|
||||
@@ -235,6 +235,7 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
|
||||
image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
|
||||
image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
|
||||
image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
|
||||
+image-$(CONFIG_RB_PPC) += dtbImage.rb600
|
||||
|
||||
# Board ports in arch/powerpc/platform/85xx/Kconfig
|
||||
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
|
||||
@ -1,245 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/dts/rb600.dts
|
||||
@@ -0,0 +1,242 @@
|
||||
+/*
|
||||
+ * RouterBOARD 600 series Device Tree Source
|
||||
+ *
|
||||
+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License as published by the
|
||||
+ * Free Software Foundation; either version 2 of the License, or (at your
|
||||
+ * option) any later version.
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+/ {
|
||||
+ model = "RB600";
|
||||
+ compatible = "MPC83xx";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &enet0;
|
||||
+ ethernet1 = &enet1;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ linux,stdout-path = "/soc8343@e0000000/serial@4500";
|
||||
+ };
|
||||
+
|
||||
+ cpus {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+ PowerPC,8343E@0 {
|
||||
+ device_type = "cpu";
|
||||
+ reg = <0x0>;
|
||||
+ d-cache-line-size = <0x20>;
|
||||
+ i-cache-line-size = <0x20>;
|
||||
+ d-cache-size = <0x8000>;
|
||||
+ i-cache-size = <0x8000>;
|
||||
+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
|
||||
+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
|
||||
+ };
|
||||
+
|
||||
+ cf@f9200000 {
|
||||
+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
|
||||
+ interrupt-at-level = <0x0>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x16 0x8>;
|
||||
+ lbc_extra_divider = <0x1>;
|
||||
+ reg = <0xf9200000 0x200000>;
|
||||
+ device_type = "rb,cf";
|
||||
+ };
|
||||
+
|
||||
+ cf@f9000000 {
|
||||
+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
|
||||
+ interrupt-at-level = <0x0>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x14 0x8>;
|
||||
+ lbc_extra_divider = <0x1>;
|
||||
+ reg = <0xf9000000 0x200000>;
|
||||
+ device_type = "rb,cf";
|
||||
+ };
|
||||
+
|
||||
+ flash {
|
||||
+ reg = <0xff800000 0x20000>;
|
||||
+ };
|
||||
+
|
||||
+ nnand {
|
||||
+ reg = <0xf0000000 0x1000>;
|
||||
+ };
|
||||
+
|
||||
+ nand {
|
||||
+ ale = <&gpio 0x6>;
|
||||
+ cle = <&gpio 0x5>;
|
||||
+ nce = <&gpio 0x4>;
|
||||
+ rdy = <&gpio 0x3>;
|
||||
+ reg = <0xf8000000 0x1000>;
|
||||
+ device_type = "rb,nand";
|
||||
+ };
|
||||
+
|
||||
+ fancon {
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x17 0x8>;
|
||||
+ sense = <&gpio 0x7>;
|
||||
+ fan_on = <&gpio 0x9>;
|
||||
+ };
|
||||
+
|
||||
+ pci0: pci@e0008500 {
|
||||
+ device_type = "pci";
|
||||
+ compatible = "fsl,mpc8349-pci";
|
||||
+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ #interrupt-cells = <1>;
|
||||
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
|
||||
+ bus-range = <0x0 0x0>;
|
||||
+ interrupt-map = <
|
||||
+ 0x5800 0x0 0x0 0x1 &ipic 0x15 0x8
|
||||
+ 0x6000 0x0 0x0 0x1 &ipic 0x30 0x8
|
||||
+ 0x6000 0x0 0x0 0x2 &ipic 0x11 0x8
|
||||
+ 0x6800 0x0 0x0 0x1 &ipic 0x11 0x8
|
||||
+ 0x6800 0x0 0x0 0x2 &ipic 0x12 0x8
|
||||
+ 0x7000 0x0 0x0 0x1 &ipic 0x12 0x8
|
||||
+ 0x7000 0x0 0x0 0x2 &ipic 0x13 0x8
|
||||
+ 0x7800 0x0 0x0 0x1 &ipic 0x13 0x8
|
||||
+ 0x7800 0x0 0x0 0x2 &ipic 0x30 0x8
|
||||
+ 0x8000 0x0 0x0 0x1 &ipic 0x30 0x8
|
||||
+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
|
||||
+ 0x8000 0x0 0x0 0x3 &ipic 0x11 0x8
|
||||
+ 0x8000 0x0 0x0 0x4 &ipic 0x13 0x8
|
||||
+ 0xa000 0x0 0x0 0x1 &ipic 0x30 0x8
|
||||
+ 0xa000 0x0 0x0 0x2 &ipic 0x11 0x8
|
||||
+ 0xa000 0x0 0x0 0x3 &ipic 0x12 0x8
|
||||
+ 0xa000 0x0 0x0 0x4 &ipic 0x13 0x8
|
||||
+ 0xa800 0x0 0x0 0x1 &ipic 0x11 0x8
|
||||
+ 0xa800 0x0 0x0 0x2 &ipic 0x12 0x8
|
||||
+ 0xa800 0x0 0x0 0x3 &ipic 0x13 0x8
|
||||
+ 0xa800 0x0 0x0 0x4 &ipic 0x30 0x8>;
|
||||
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ };
|
||||
+
|
||||
+ soc8343@e0000000 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ device_type = "soc";
|
||||
+ compatible = "simple-bus";
|
||||
+ ranges = <0x0 0xe0000000 0x100000>;
|
||||
+ reg = <0xe0000000 0x200>;
|
||||
+ bus-frequency = <0x1>;
|
||||
+
|
||||
+ led {
|
||||
+ user_led = <0x400 0x8>;
|
||||
+ };
|
||||
+
|
||||
+ beeper {
|
||||
+ reg = <0x500 0x100>;
|
||||
+ };
|
||||
+
|
||||
+ gpio: gpio@0 {
|
||||
+ reg = <0xc08 0x4>;
|
||||
+ device-id = <0x0>;
|
||||
+ compatible = "gpio";
|
||||
+ device_type = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ enet0: ethernet@25000 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ cell-index = <0>;
|
||||
+ phy-handle = <&phy0>;
|
||||
+ tbi-handle = <&tbi0>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
|
||||
+ local-mac-address = [00 00 00 00 00 00];
|
||||
+ reg = <0x25000 0x1000>;
|
||||
+ ranges = <0x0 0x25000 0x1000>;
|
||||
+ compatible = "gianfar";
|
||||
+ model = "TSEC";
|
||||
+ device_type = "network";
|
||||
+
|
||||
+ mdio@520 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ compatible = "fsl,gianfar-tbi";
|
||||
+ reg = <0x520 0x20>;
|
||||
+
|
||||
+ tbi0: tbi-phy@11 {
|
||||
+ reg = <0x11>;
|
||||
+ device_type = "tbi-phy";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ enet1: ethernet@24000 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ cell-index = <1>;
|
||||
+ phy-handle = <&phy1>;
|
||||
+ tbi-handle = <&tbi1>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
|
||||
+ local-mac-address = [00 00 00 00 00 00];
|
||||
+ reg = <0x24000 0x1000>;
|
||||
+ ranges = <0x0 0x24000 0x1000>;
|
||||
+ compatible = "gianfar";
|
||||
+ model = "TSEC";
|
||||
+ device_type = "network";
|
||||
+
|
||||
+ mdio@520 {
|
||||
+ #size-cells = <0x0>;
|
||||
+ #address-cells = <0x1>;
|
||||
+ reg = <0x520 0x20>;
|
||||
+ compatible = "fsl,gianfar-mdio";
|
||||
+
|
||||
+ phy0: ethernet-phy@0 {
|
||||
+ device_type = "ethernet-phy";
|
||||
+ reg = <0x0>;
|
||||
+ };
|
||||
+
|
||||
+ phy1: ethernet-phy@1 {
|
||||
+ device_type = "ethernet-phy";
|
||||
+ reg = <0x1>;
|
||||
+ };
|
||||
+
|
||||
+ tbi1: tbi-phy@11 {
|
||||
+ reg = <0x11>;
|
||||
+ device_type = "tbi-phy";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ ipic: pic@700 {
|
||||
+ interrupt-controller;
|
||||
+ #address-cells = <0>;
|
||||
+ #interrupt-cells = <2>;
|
||||
+ reg = <0x700 0x100>;
|
||||
+ device_type = "ipic";
|
||||
+ };
|
||||
+
|
||||
+ serial@4500 {
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x9 0x8>;
|
||||
+ clock-frequency = <0xfe4f840>;
|
||||
+ reg = <0x4500 0x100>;
|
||||
+ compatible = "ns16550";
|
||||
+ device_type = "serial";
|
||||
+ };
|
||||
+
|
||||
+ wdt@200 {
|
||||
+ reg = <0x200 0x100>;
|
||||
+ compatible = "mpc83xx_wdt";
|
||||
+ device_type = "watchdog";
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
@ -1,83 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/rb600.c
|
||||
@@ -0,0 +1,80 @@
|
||||
+/*
|
||||
+ * The RouterBOARD platform -- for booting RB600(A) RouterBOARDs.
|
||||
+ *
|
||||
+ * Author: Michael Guntsche <mike@it-loops.com>
|
||||
+ *
|
||||
+ * Copyright (c) 2009 Michael Guntsche
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include "ops.h"
|
||||
+#include "types.h"
|
||||
+#include "io.h"
|
||||
+#include "stdio.h"
|
||||
+#include <libfdt.h>
|
||||
+
|
||||
+BSS_STACK(4*1024);
|
||||
+
|
||||
+u64 memsize64;
|
||||
+const void *fw_dtb;
|
||||
+
|
||||
+static void rb600_fixups(void)
|
||||
+{
|
||||
+ const u32 *reg, *timebase, *clock;
|
||||
+ int node, size;
|
||||
+ void *chosen;
|
||||
+ const char* bootargs;
|
||||
+
|
||||
+ dt_fixup_memory(0, memsize64);
|
||||
+
|
||||
+ /* Set the MAC addresses. */
|
||||
+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@24000");
|
||||
+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
|
||||
+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
|
||||
+
|
||||
+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@25000");
|
||||
+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
|
||||
+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
|
||||
+
|
||||
+ /* Find the CPU timebase and clock frequencies. */
|
||||
+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
|
||||
+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
|
||||
+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
|
||||
+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
|
||||
+
|
||||
+ /* Fixup chosen
|
||||
+ * The bootloader reads the kernelparm segment and adds the content to
|
||||
+ * bootargs. This is needed to specify root and other boot flags.
|
||||
+ */
|
||||
+ chosen = finddevice("/chosen");
|
||||
+ node = fdt_path_offset(fw_dtb, "/chosen");
|
||||
+ bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
|
||||
+ setprop_str(chosen, "bootargs", bootargs);
|
||||
+}
|
||||
+
|
||||
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||
+ unsigned long r6, unsigned long r7)
|
||||
+{
|
||||
+ const u32 *reg;
|
||||
+ int node, size;
|
||||
+
|
||||
+ fw_dtb = (const void *)r3;
|
||||
+
|
||||
+ /* Find the memory range. */
|
||||
+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
|
||||
+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
|
||||
+ memsize64 = reg[1];
|
||||
+
|
||||
+ /* Now we have the memory size; initialize the heap. */
|
||||
+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
|
||||
+
|
||||
+ /* Prepare the device tree and find the console. */
|
||||
+ fdt_init(_dtb_start);
|
||||
+ serial_console_init();
|
||||
+
|
||||
+ /* Remaining fixups... */
|
||||
+ platform_ops.fixups = rb600_fixups;
|
||||
+}
|
||||
@ -1,11 +0,0 @@
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -209,7 +209,7 @@ ps3)
|
||||
isection=.kernel:initrd
|
||||
link_address=''
|
||||
;;
|
||||
-ep88xc|ep405|ep8248e)
|
||||
+ep88xc|ep405|ep8248e|rb600)
|
||||
platformo="$object/fixed-head.o $object/$platform.o"
|
||||
binary=y
|
||||
;;
|
||||
@ -1,14 +0,0 @@
|
||||
--- a/arch/powerpc/kernel/Makefile
|
||||
+++ b/arch/powerpc/kernel/Makefile
|
||||
@@ -116,9 +116,11 @@ obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) +=
|
||||
|
||||
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
|
||||
|
||||
+ifneq ($(CONFIG_RB_IOMAP),y)
|
||||
ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
|
||||
obj-y += iomap.o
|
||||
endif
|
||||
+endif
|
||||
|
||||
obj-$(CONFIG_PPC64) += $(obj64-y)
|
||||
obj-$(CONFIG_PPC32) += $(obj32-y)
|
||||
@ -1,18 +0,0 @@
|
||||
--- a/arch/powerpc/platforms/83xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/83xx/Kconfig
|
||||
@@ -38,6 +38,15 @@ config MPC832x_RDB
|
||||
help
|
||||
This option enables support for the MPC8323 RDB board.
|
||||
|
||||
+config RB_PPC
|
||||
+ bool "MikroTik RouterBOARD 600 series"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select QUICC_ENGINE
|
||||
+ select PPC_MPC834x
|
||||
+ select RB_IOMAP
|
||||
+ help
|
||||
+ This option enables support for MikroTik RouterBOARD 600 series boards.
|
||||
+
|
||||
config MPC834x_MDS
|
||||
bool "Freescale MPC834x MDS"
|
||||
select DEFAULT_UIMAGE
|
||||
@ -1,10 +0,0 @@
|
||||
--- a/arch/powerpc/platforms/83xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/83xx/Makefile
|
||||
@@ -7,6 +7,7 @@ obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mp
|
||||
obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
|
||||
obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
|
||||
obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
|
||||
+obj-$(CONFIG_RB_PPC) += rbppc.o
|
||||
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
|
||||
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
|
||||
obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
|
||||
@ -1,13 +0,0 @@
|
||||
--- a/arch/powerpc/platforms/Kconfig
|
||||
+++ b/arch/powerpc/platforms/Kconfig
|
||||
@@ -146,6 +146,10 @@ config GENERIC_IOMAP
|
||||
bool
|
||||
default n
|
||||
|
||||
+config RB_IOMAP
|
||||
+ bool
|
||||
+ default y if RB_PPC
|
||||
+
|
||||
source "drivers/cpufreq/Kconfig"
|
||||
|
||||
menu "CPU Frequency drivers"
|
||||
@ -1,8 +0,0 @@
|
||||
--- a/arch/powerpc/sysdev/Makefile
|
||||
+++ b/arch/powerpc/sysdev/Makefile
|
||||
@@ -57,3 +57,5 @@ obj-$(CONFIG_PPC_MPC52xx) += mpc5xxx_clo
|
||||
ifeq ($(CONFIG_SUSPEND),y)
|
||||
obj-$(CONFIG_6xx) += 6xx-suspend.o
|
||||
endif
|
||||
+
|
||||
+obj-$(CONFIG_RB_IOMAP) += rb_iomap.o
|
||||
@ -1,226 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/sysdev/rb_iomap.c
|
||||
@@ -0,0 +1,223 @@
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/pci.h>
|
||||
+#include <linux/mm.h>
|
||||
+#include <asm/io.h>
|
||||
+
|
||||
+#define LOCALBUS_START 0x40000000
|
||||
+#define LOCALBUS_MASK 0x007fffff
|
||||
+#define LOCALBUS_REGMASK 0x001fffff
|
||||
+
|
||||
+static void __iomem *localbus_base;
|
||||
+
|
||||
+static inline int is_localbus(void __iomem *addr)
|
||||
+{
|
||||
+ return ((unsigned) addr & ~LOCALBUS_MASK) == LOCALBUS_START;
|
||||
+}
|
||||
+
|
||||
+static inline unsigned localbus_regoff(unsigned reg) {
|
||||
+ return (reg << 16) | (((reg ^ 8) & 8) << 17);
|
||||
+}
|
||||
+
|
||||
+static inline void __iomem *localbus_addr(void __iomem *addr)
|
||||
+{
|
||||
+ return localbus_base
|
||||
+ + ((unsigned) addr & LOCALBUS_MASK & ~LOCALBUS_REGMASK)
|
||||
+ + localbus_regoff((unsigned) addr & LOCALBUS_REGMASK);
|
||||
+}
|
||||
+
|
||||
+unsigned int ioread8(void __iomem *addr)
|
||||
+{
|
||||
+ if (is_localbus(addr))
|
||||
+ return in_be16(localbus_addr(addr)) >> 8;
|
||||
+ return readb(addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread8);
|
||||
+
|
||||
+unsigned int ioread16(void __iomem *addr)
|
||||
+{
|
||||
+ if (is_localbus(addr))
|
||||
+ return le16_to_cpu(in_be16(localbus_addr(addr)));
|
||||
+ return readw(addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread16);
|
||||
+
|
||||
+unsigned int ioread16be(void __iomem *addr)
|
||||
+{
|
||||
+ return in_be16(addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread16be);
|
||||
+
|
||||
+unsigned int ioread32(void __iomem *addr)
|
||||
+{
|
||||
+ return readl(addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread32);
|
||||
+
|
||||
+unsigned int ioread32be(void __iomem *addr)
|
||||
+{
|
||||
+ return in_be32(addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread32be);
|
||||
+
|
||||
+void iowrite8(u8 val, void __iomem *addr)
|
||||
+{
|
||||
+ if (is_localbus(addr))
|
||||
+ out_be16(localbus_addr(addr), ((u16) val) << 8);
|
||||
+ else
|
||||
+ writeb(val, addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite8);
|
||||
+
|
||||
+void iowrite16(u16 val, void __iomem *addr)
|
||||
+{
|
||||
+ if (is_localbus(addr))
|
||||
+ out_be16(localbus_addr(addr), cpu_to_le16(val));
|
||||
+ else
|
||||
+ writew(val, addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite16);
|
||||
+
|
||||
+void iowrite16be(u16 val, void __iomem *addr)
|
||||
+{
|
||||
+ out_be16(addr, val);
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite16be);
|
||||
+
|
||||
+void iowrite32(u32 val, void __iomem *addr)
|
||||
+{
|
||||
+ writel(val, addr);
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite32);
|
||||
+
|
||||
+void iowrite32be(u32 val, void __iomem *addr)
|
||||
+{
|
||||
+ out_be32(addr, val);
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite32be);
|
||||
+
|
||||
+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
|
||||
+{
|
||||
+ if (is_localbus(addr)) {
|
||||
+ unsigned i;
|
||||
+ void *laddr = localbus_addr(addr);
|
||||
+ u8 *buf = dst;
|
||||
+
|
||||
+ for (i = 0; i < count; ++i) {
|
||||
+ *buf++ = in_be16(laddr) >> 8;
|
||||
+ }
|
||||
+ } else {
|
||||
+ _insb((u8 __iomem *) addr, dst, count);
|
||||
+ }
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread8_rep);
|
||||
+
|
||||
+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
|
||||
+{
|
||||
+ if (is_localbus(addr)) {
|
||||
+ unsigned i;
|
||||
+ void *laddr = localbus_addr(addr);
|
||||
+ u16 *buf = dst;
|
||||
+
|
||||
+ for (i = 0; i < count; ++i) {
|
||||
+ *buf++ = in_be16(laddr);
|
||||
+ }
|
||||
+ } else {
|
||||
+ _insw_ns((u16 __iomem *) addr, dst, count);
|
||||
+ }
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread16_rep);
|
||||
+
|
||||
+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
|
||||
+{
|
||||
+ _insl_ns((u32 __iomem *) addr, dst, count);
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioread32_rep);
|
||||
+
|
||||
+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
|
||||
+{
|
||||
+ if (is_localbus(addr)) {
|
||||
+ unsigned i;
|
||||
+ void *laddr = localbus_addr(addr);
|
||||
+ const u8 *buf = src;
|
||||
+
|
||||
+ for (i = 0; i < count; ++i) {
|
||||
+ out_be16(laddr, ((u16) *buf++) << 8);
|
||||
+ }
|
||||
+ } else {
|
||||
+ _outsb((u8 __iomem *) addr, src, count);
|
||||
+ }
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite8_rep);
|
||||
+
|
||||
+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
|
||||
+{
|
||||
+ if (is_localbus(addr)) {
|
||||
+ unsigned i;
|
||||
+ void *laddr = localbus_addr(addr);
|
||||
+ const u16 *buf = src;
|
||||
+
|
||||
+ for (i = 0; i < count; ++i) {
|
||||
+ out_be16(laddr, *buf++);
|
||||
+ }
|
||||
+ } else {
|
||||
+ _outsw_ns((u16 __iomem *) addr, src, count);
|
||||
+ }
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite16_rep);
|
||||
+
|
||||
+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
|
||||
+{
|
||||
+ _outsl_ns((u32 __iomem *) addr, src, count);
|
||||
+}
|
||||
+EXPORT_SYMBOL(iowrite32_rep);
|
||||
+
|
||||
+void __iomem *ioport_map(unsigned long port, unsigned int len)
|
||||
+{
|
||||
+ return (void __iomem *) (port + _IO_BASE);
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioport_unmap);
|
||||
+
|
||||
+void ioport_unmap(void __iomem *addr)
|
||||
+{
|
||||
+ /* Nothing to do */
|
||||
+}
|
||||
+EXPORT_SYMBOL(ioport_map);
|
||||
+
|
||||
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
|
||||
+{
|
||||
+ unsigned long start = pci_resource_start(dev, bar);
|
||||
+ unsigned long len = pci_resource_len(dev, bar);
|
||||
+ unsigned long flags = pci_resource_flags(dev, bar);
|
||||
+
|
||||
+ if (!len)
|
||||
+ return NULL;
|
||||
+ if (max && len > max)
|
||||
+ len = max;
|
||||
+ if (flags & IORESOURCE_IO)
|
||||
+ return ioport_map(start, len);
|
||||
+ if (flags & IORESOURCE_MEM)
|
||||
+ return ioremap(start, len);
|
||||
+ /* What? */
|
||||
+ return NULL;
|
||||
+}
|
||||
+EXPORT_SYMBOL(pci_iomap);
|
||||
+
|
||||
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
|
||||
+{
|
||||
+ /* Nothing to do */
|
||||
+}
|
||||
+EXPORT_SYMBOL(pci_iounmap);
|
||||
+
|
||||
+void __iomem *localbus_map(unsigned long addr, unsigned int len)
|
||||
+{
|
||||
+ if (!localbus_base)
|
||||
+ localbus_base = ioremap(addr & ~LOCALBUS_MASK,
|
||||
+ LOCALBUS_MASK + 1);
|
||||
+ return (void *) (LOCALBUS_START + (addr & LOCALBUS_MASK));
|
||||
+}
|
||||
+EXPORT_SYMBOL(localbus_map);
|
||||
+
|
||||
+void localbus_unmap(void __iomem *addr)
|
||||
+{
|
||||
+}
|
||||
+EXPORT_SYMBOL(localbus_unmap);
|
||||
@ -1,15 +0,0 @@
|
||||
--- a/drivers/ata/Kconfig
|
||||
+++ b/drivers/ata/Kconfig
|
||||
@@ -862,5 +862,12 @@ config PATA_LEGACY
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
+config PATA_RB_PPC
|
||||
+ tristate "MikroTik RB600 PATA support"
|
||||
+ depends on RB_PPC
|
||||
+ help
|
||||
+ This option enables support for PATA devices on MikroTik RouterBOARD
|
||||
+ 600 series boards.
|
||||
+
|
||||
endif # ATA_SFF
|
||||
endif # ATA
|
||||
@ -1,10 +0,0 @@
|
||||
--- a/drivers/ata/Makefile
|
||||
+++ b/drivers/ata/Makefile
|
||||
@@ -87,6 +87,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_plat
|
||||
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
||||
obj-$(CONFIG_PATA_QDI) += pata_qdi.o
|
||||
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
|
||||
+obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o
|
||||
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
|
||||
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
|
||||
|
||||
@ -1,704 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/drivers/ata/pata_rbppc_cf.c
|
||||
@@ -0,0 +1,701 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
|
||||
+ * Copyright (C) Mikrotik 2007
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License as published by the
|
||||
+ * Free Software Foundation; either version 2 of the License, or (at your
|
||||
+ * option) any later version.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/kernel.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <scsi/scsi_host.h>
|
||||
+#include <linux/libata.h>
|
||||
+#include <linux/of_platform.h>
|
||||
+#include <linux/ata_platform.h>
|
||||
+
|
||||
+#define DEBUG_UPM 0
|
||||
+
|
||||
+#define DRV_NAME "pata_rbppc_cf"
|
||||
+#define DRV_VERSION "0.0.2"
|
||||
+
|
||||
+#define DEV2SEL_OFFSET 0x00100000
|
||||
+
|
||||
+#define IMMR_LBCFG_OFFSET 0x00005000
|
||||
+#define IMMR_LBCFG_SIZE 0x00001000
|
||||
+
|
||||
+#define LOCAL_BUS_MCMR 0x00000078
|
||||
+#define MxMR_OP_MASK 0x30000000
|
||||
+#define MxMR_OP_NORMAL 0x00000000
|
||||
+#define MxMR_OP_WRITE 0x10000000
|
||||
+#define MxMR_OP_READ 0x20000000
|
||||
+#define MxMR_OP_RUN 0x30000000
|
||||
+#define MxMR_LUPWAIT_LOW 0x08000000
|
||||
+#define MxMR_LUPWAIT_HIGH 0x00000000
|
||||
+#define MxMR_LUPWAIT_ENABLE 0x00040000
|
||||
+#define MxMR_RLF_MASK 0x0003c000
|
||||
+#define MxMR_RLF_SHIFT 14
|
||||
+#define MxMR_WLF_MASK 0x00003c00
|
||||
+#define MxMR_WLF_SHIFT 10
|
||||
+#define MxMR_MAD_MASK 0x0000003f
|
||||
+#define LOCAL_BUS_MDR 0x00000088
|
||||
+#define LOCAL_BUS_LCRR 0x000000D4
|
||||
+#define LCRR_CLKDIV_MASK 0x0000000f
|
||||
+
|
||||
+#define LOOP_SIZE 4
|
||||
+
|
||||
+#define UPM_READ_SINGLE_OFFSET 0x00
|
||||
+#define UPM_WRITE_SINGLE_OFFSET 0x18
|
||||
+#define UPM_DATA_SIZE 0x40
|
||||
+
|
||||
+#define LBT_CPUIN_MIN 0
|
||||
+#define LBT_CPUOUT_MIN 1
|
||||
+#define LBT_CPUOUT_MAX 2
|
||||
+#define LBT_EXTDEL_MIN 3
|
||||
+#define LBT_EXTDEL_MAX 4
|
||||
+#define LBT_SIZE 5
|
||||
+
|
||||
+/* UPM machine configuration bits */
|
||||
+#define N_BASE 0x00f00000
|
||||
+#define N_CS 0xf0000000
|
||||
+#define N_CS_H1 0xc0000000
|
||||
+#define N_CS_H2 0x30000000
|
||||
+#define N_WE 0x0f000000
|
||||
+#define N_WE_H1 0x0c000000
|
||||
+#define N_WE_H2 0x03000000
|
||||
+#define N_OE 0x00030000
|
||||
+#define N_OE_H1 0x00020000
|
||||
+#define N_OE_H2 0x00010000
|
||||
+#define WAEN 0x00001000
|
||||
+#define REDO_2 0x00000100
|
||||
+#define REDO_3 0x00000200
|
||||
+#define REDO_4 0x00000300
|
||||
+#define LOOP 0x00000080
|
||||
+#define NA 0x00000008
|
||||
+#define UTA 0x00000004
|
||||
+#define LAST 0x00000001
|
||||
+
|
||||
+#define REDO_VAL(mult) (REDO_2 * ((mult) - 1))
|
||||
+#define REDO_MAX_MULT 4
|
||||
+
|
||||
+#define READ_BASE (N_BASE | N_WE)
|
||||
+#define WRITE_BASE (N_BASE | N_OE)
|
||||
+#define EMPTY (N_BASE | N_CS | N_OE | N_WE | LAST)
|
||||
+
|
||||
+#define EOF_UPM_SETTINGS 0
|
||||
+#define ANOTHER_TIMING 1
|
||||
+
|
||||
+#define OA_CPUIN_MIN 0x01
|
||||
+#define OA_CPUOUT_MAX 0x02
|
||||
+#define OD_CPUOUT_MIN 0x04
|
||||
+#define OA_CPUOUT_DELTA 0x06
|
||||
+#define OA_EXTDEL_MAX 0x08
|
||||
+#define OD_EXTDEL_MIN 0x10
|
||||
+#define OA_EXTDEL_DELTA 0x18
|
||||
+#define O_MIN_CYCLE_TIME 0x20
|
||||
+#define O_MINUS_PREV 0x40
|
||||
+#define O_HALF_CYCLE 0x80
|
||||
+
|
||||
+extern void __iomem *localbus_map(unsigned long addr, unsigned int len);
|
||||
+extern void localbus_unmap(void __iomem *addr);
|
||||
+
|
||||
+struct rbppc_cf_info {
|
||||
+ unsigned lbcfg_addr;
|
||||
+ unsigned clk_time_ps;
|
||||
+ int cur_mode;
|
||||
+ u32 lb_timings[LBT_SIZE];
|
||||
+};
|
||||
+static struct rbppc_cf_info *rbinfo = NULL;
|
||||
+
|
||||
+struct upm_setting {
|
||||
+ unsigned value;
|
||||
+ unsigned ns[7];
|
||||
+ unsigned clk_minus;
|
||||
+ unsigned group_size;
|
||||
+ unsigned options;
|
||||
+};
|
||||
+
|
||||
+static const struct upm_setting cfUpmReadSingle[] = {
|
||||
+ { READ_BASE | N_OE,
|
||||
+ /* t1 - ADDR setup time */
|
||||
+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
|
||||
+ OA_EXTDEL_MAX) },
|
||||
+ { READ_BASE | N_OE_H1,
|
||||
+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
|
||||
+ { READ_BASE,
|
||||
+ /* t2 - OE0 time */
|
||||
+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 2, (OA_CPUOUT_MAX |
|
||||
+ OA_CPUIN_MIN) },
|
||||
+ { READ_BASE | WAEN,
|
||||
+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
|
||||
+ { READ_BASE | UTA,
|
||||
+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
|
||||
+ { READ_BASE | N_OE,
|
||||
+ /* t9 - ADDR hold time */
|
||||
+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
|
||||
+ OD_EXTDEL_MIN) },
|
||||
+ { READ_BASE | N_OE | N_CS_H2,
|
||||
+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
|
||||
+ { READ_BASE | N_OE | N_CS,
|
||||
+ /* t6Z -IORD data tristate */
|
||||
+ { 30, 30, 30, 30, 30, 20, 20 }, 1, 1, O_MINUS_PREV },
|
||||
+ { ANOTHER_TIMING,
|
||||
+ /* t2i -IORD recovery time */
|
||||
+ { 0, 0, 0, 70, 25, 25, 20 }, 2, 0, 0 },
|
||||
+ { ANOTHER_TIMING,
|
||||
+ /* CS 0 -> 1 MAX */
|
||||
+ { 0, 0, 0, 0, 0, 0, 0 }, 1, 0, (OA_CPUOUT_DELTA |
|
||||
+ OA_EXTDEL_MAX) },
|
||||
+ { READ_BASE | N_OE | N_CS | LAST,
|
||||
+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
|
||||
+ { EOF_UPM_SETTINGS,
|
||||
+ /* min total cycle time - includes turnaround and ALE cycle */
|
||||
+ { 600, 383, 240, 180, 120, 100, 80 }, 2, 0, O_MIN_CYCLE_TIME },
|
||||
+};
|
||||
+
|
||||
+static const struct upm_setting cfUpmWriteSingle[] = {
|
||||
+ { WRITE_BASE | N_WE,
|
||||
+ /* t1 - ADDR setup time */
|
||||
+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
|
||||
+ OA_EXTDEL_MAX) },
|
||||
+ { WRITE_BASE | N_WE_H1,
|
||||
+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
|
||||
+ { WRITE_BASE,
|
||||
+ /* t2 - WE0 time */
|
||||
+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 1, OA_CPUOUT_DELTA },
|
||||
+ { WRITE_BASE | WAEN,
|
||||
+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
|
||||
+ { WRITE_BASE | N_WE,
|
||||
+ /* t9 - ADDR hold time */
|
||||
+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
|
||||
+ OD_EXTDEL_MIN) },
|
||||
+ { WRITE_BASE | N_WE | N_CS_H2,
|
||||
+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
|
||||
+ { WRITE_BASE | N_WE | N_CS,
|
||||
+ /* t4 - DATA hold time */
|
||||
+ { 30, 20, 15, 10, 10, 10, 10 }, 0, 1, O_MINUS_PREV },
|
||||
+ { ANOTHER_TIMING,
|
||||
+ /* t2i -IOWR recovery time */
|
||||
+ { 0, 0, 0, 70, 25, 25, 20 }, 1, 0, 0 },
|
||||
+ { ANOTHER_TIMING,
|
||||
+ /* CS 0 -> 1 MAX */
|
||||
+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, (OA_CPUOUT_DELTA |
|
||||
+ OA_EXTDEL_MAX) },
|
||||
+ { WRITE_BASE | N_WE | N_CS | UTA | LAST,
|
||||
+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
|
||||
+ /* min total cycle time - includes ALE cycle */
|
||||
+ { EOF_UPM_SETTINGS,
|
||||
+ { 600, 383, 240, 180, 120, 100, 80 }, 1, 0, O_MIN_CYCLE_TIME },
|
||||
+};
|
||||
+
|
||||
+static u8 rbppc_cf_check_status(struct ata_port *ap) {
|
||||
+ u8 val = ioread8(ap->ioaddr.status_addr);
|
||||
+ if (val == 0xF9)
|
||||
+ val = 0x7F;
|
||||
+ return val;
|
||||
+}
|
||||
+
|
||||
+static u8 rbppc_cf_check_altstatus(struct ata_port *ap) {
|
||||
+ u8 val = ioread8(ap->ioaddr.altstatus_addr);
|
||||
+ if (val == 0xF9)
|
||||
+ val = 0x7F;
|
||||
+ return val;
|
||||
+}
|
||||
+
|
||||
+static void rbppc_cf_dummy_noret(struct ata_port *ap) { }
|
||||
+static int rbppc_cf_dummy_ret0(struct ata_port *ap) { return 0; }
|
||||
+
|
||||
+static int ps2clk(int ps, unsigned clk_time_ps) {
|
||||
+ int psMaxOver;
|
||||
+ if (ps <= 0) return 0;
|
||||
+
|
||||
+ /* round down if <= 2% over clk border, but no more than 1/4 clk cycle */
|
||||
+ psMaxOver = ps * 2 / 100;
|
||||
+ if (4 * psMaxOver > clk_time_ps) {
|
||||
+ psMaxOver = clk_time_ps / 4;
|
||||
+ }
|
||||
+ return (ps + clk_time_ps - 1 - psMaxOver) / clk_time_ps;
|
||||
+}
|
||||
+
|
||||
+static int upm_gen_ps_table(const struct upm_setting *upm,
|
||||
+ int mode, struct rbppc_cf_info *info,
|
||||
+ int *psFinal) {
|
||||
+ int uidx;
|
||||
+ int lastUpmValIdx = 0;
|
||||
+ int group_start_idx = -1;
|
||||
+ int group_left_num = -1;
|
||||
+ int clk_time_ps = info->clk_time_ps;
|
||||
+
|
||||
+ for (uidx = 0; upm[uidx].value != EOF_UPM_SETTINGS; ++uidx) {
|
||||
+ const struct upm_setting *us = upm + uidx;
|
||||
+ unsigned opt = us->options;
|
||||
+ int ps = us->ns[mode] * 1000 - us->clk_minus * clk_time_ps;
|
||||
+
|
||||
+ if (opt & OA_CPUIN_MIN) ps += info->lb_timings[LBT_CPUIN_MIN];
|
||||
+ if (opt & OD_CPUOUT_MIN) ps -= info->lb_timings[LBT_CPUOUT_MIN];
|
||||
+ if (opt & OA_CPUOUT_MAX) ps += info->lb_timings[LBT_CPUOUT_MAX];
|
||||
+ if (opt & OD_EXTDEL_MIN) ps -= info->lb_timings[LBT_EXTDEL_MIN];
|
||||
+ if (opt & OA_EXTDEL_MAX) ps += info->lb_timings[LBT_EXTDEL_MAX];
|
||||
+
|
||||
+ if (us->value == ANOTHER_TIMING) {
|
||||
+ /* use longest timing from alternatives */
|
||||
+ if (psFinal[lastUpmValIdx] < ps) {
|
||||
+ psFinal[lastUpmValIdx] = ps;
|
||||
+ }
|
||||
+ ps = 0;
|
||||
+ }
|
||||
+ else {
|
||||
+ if (us->group_size) {
|
||||
+ group_start_idx = uidx;
|
||||
+ group_left_num = us->group_size;
|
||||
+ }
|
||||
+ else if (group_left_num > 0) {
|
||||
+ /* group time is divided on all group members */
|
||||
+ int clk = ps2clk(ps, clk_time_ps);
|
||||
+ psFinal[group_start_idx] -= clk * clk_time_ps;
|
||||
+ --group_left_num;
|
||||
+ }
|
||||
+ if ((opt & O_MINUS_PREV) && lastUpmValIdx > 0) {
|
||||
+ int clk = ps2clk(psFinal[lastUpmValIdx],
|
||||
+ clk_time_ps);
|
||||
+ ps -= clk * clk_time_ps;
|
||||
+ }
|
||||
+ lastUpmValIdx = uidx;
|
||||
+ }
|
||||
+ psFinal[uidx] = ps;
|
||||
+ }
|
||||
+ return uidx;
|
||||
+}
|
||||
+
|
||||
+static int free_half(int ps, int clk, int clk_time_ps) {
|
||||
+ if (clk < 2) return 0;
|
||||
+ return (clk * clk_time_ps - ps) * 2 >= clk_time_ps;
|
||||
+}
|
||||
+
|
||||
+static void upm_gen_clk_table(const struct upm_setting *upm,
|
||||
+ int mode, int clk_time_ps,
|
||||
+ int max_uidx, const int *psFinal, int *clkFinal) {
|
||||
+ int clk_cycle_time;
|
||||
+ int clk_total;
|
||||
+ int uidx;
|
||||
+
|
||||
+ /* convert picoseconds to clocks */
|
||||
+ clk_total = 0;
|
||||
+ for (uidx = 0; uidx < max_uidx; ++uidx) {
|
||||
+ int clk = ps2clk(psFinal[uidx], clk_time_ps);
|
||||
+ clkFinal[uidx] = clk;
|
||||
+ clk_total += clk;
|
||||
+ }
|
||||
+
|
||||
+ /* check possibility of half cycle usage */
|
||||
+ for (uidx = 1; uidx < max_uidx - 1; ++uidx) {
|
||||
+ if ((upm[uidx].options & O_HALF_CYCLE) &&
|
||||
+ free_half(psFinal[uidx - 1], clkFinal[uidx - 1],
|
||||
+ clk_time_ps) &&
|
||||
+ free_half(psFinal[uidx + 1], clkFinal[uidx + 1],
|
||||
+ clk_time_ps)) {
|
||||
+ ++clkFinal[uidx];
|
||||
+ --clkFinal[uidx - 1];
|
||||
+ --clkFinal[uidx + 1];
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ if ((upm[max_uidx].options & O_MIN_CYCLE_TIME) == 0) return;
|
||||
+
|
||||
+ /* check cycle time, adjust timings if needed */
|
||||
+ clk_cycle_time = (ps2clk(upm[max_uidx].ns[mode] * 1000, clk_time_ps) -
|
||||
+ upm[max_uidx].clk_minus);
|
||||
+ uidx = 0;
|
||||
+ while (clk_total < clk_cycle_time) {
|
||||
+ /* extend all timings in round-robin to match cycle time */
|
||||
+ if (clkFinal[uidx]) {
|
||||
+#if DEBUG_UPM
|
||||
+ printk(KERN_INFO "extending %u by 1 clk\n", uidx);
|
||||
+#endif
|
||||
+ ++clkFinal[uidx];
|
||||
+ ++clk_total;
|
||||
+ }
|
||||
+ ++uidx;
|
||||
+ if (uidx == max_uidx) uidx = 0;
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static void add_data_val(unsigned val, int *clkLeft, int maxClk,
|
||||
+ unsigned *data, int *dataIdx) {
|
||||
+ if (*clkLeft == 0) return;
|
||||
+
|
||||
+ if (maxClk == 0 && *clkLeft >= LOOP_SIZE * 2) {
|
||||
+ int times;
|
||||
+ int times1;
|
||||
+ int times2;
|
||||
+
|
||||
+ times = *clkLeft / LOOP_SIZE;
|
||||
+ if (times > REDO_MAX_MULT * 2) times = REDO_MAX_MULT * 2;
|
||||
+ times1 = times / 2;
|
||||
+ times2 = times - times1;
|
||||
+
|
||||
+ val |= LOOP;
|
||||
+ data[*dataIdx] = val | REDO_VAL(times1);
|
||||
+ ++(*dataIdx);
|
||||
+ data[*dataIdx] = val | REDO_VAL(times2);
|
||||
+ ++(*dataIdx);
|
||||
+
|
||||
+ *clkLeft -= times * LOOP_SIZE;
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ if (maxClk < 1 || maxClk > REDO_MAX_MULT) maxClk = REDO_MAX_MULT;
|
||||
+ if (*clkLeft < maxClk) maxClk = *clkLeft;
|
||||
+
|
||||
+ *clkLeft -= maxClk;
|
||||
+ val |= REDO_VAL(maxClk);
|
||||
+
|
||||
+ data[*dataIdx] = val;
|
||||
+ ++(*dataIdx);
|
||||
+}
|
||||
+
|
||||
+static int upm_gen_final_data(const struct upm_setting *upm,
|
||||
+ int max_uidx, int *clkFinal, unsigned *data) {
|
||||
+ int dataIdx;
|
||||
+ int uidx;
|
||||
+
|
||||
+ dataIdx = 0;
|
||||
+ for (uidx = 0; uidx < max_uidx; ++uidx) {
|
||||
+ int clk = clkFinal[uidx];
|
||||
+ while (clk > 0) {
|
||||
+ add_data_val(upm[uidx].value, &clk, 0,
|
||||
+ data, &dataIdx);
|
||||
+ }
|
||||
+ }
|
||||
+ return dataIdx;
|
||||
+}
|
||||
+
|
||||
+static int conv_upm_table(const struct upm_setting *upm,
|
||||
+ int mode, struct rbppc_cf_info *info,
|
||||
+ unsigned *data) {
|
||||
+#if DEBUG_UPM
|
||||
+ int uidx;
|
||||
+#endif
|
||||
+ int psFinal[32];
|
||||
+ int clkFinal[32];
|
||||
+ int max_uidx;
|
||||
+ int data_len;
|
||||
+
|
||||
+ max_uidx = upm_gen_ps_table(upm, mode, info, psFinal);
|
||||
+
|
||||
+ upm_gen_clk_table(upm, mode, info->clk_time_ps, max_uidx,
|
||||
+ psFinal, clkFinal);
|
||||
+
|
||||
+#if DEBUG_UPM
|
||||
+ /* dump out debug info */
|
||||
+ for (uidx = 0; uidx < max_uidx; ++uidx) {
|
||||
+ if (clkFinal[uidx]) {
|
||||
+ printk(KERN_INFO "idx %d val %08x clk %d ps %d\n",
|
||||
+ uidx, upm[uidx].value,
|
||||
+ clkFinal[uidx], psFinal[uidx]);
|
||||
+ }
|
||||
+ }
|
||||
+#endif
|
||||
+
|
||||
+ data_len = upm_gen_final_data(upm, max_uidx, clkFinal, data);
|
||||
+
|
||||
+#if DEBUG_UPM
|
||||
+ for (uidx = 0; uidx < data_len; ++uidx) {
|
||||
+ printk(KERN_INFO "cf UPM x result: idx %d val %08x\n",
|
||||
+ uidx, data[uidx]);
|
||||
+ }
|
||||
+#endif
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int gen_upm_data(int mode, struct rbppc_cf_info *info, unsigned *data) {
|
||||
+ int i;
|
||||
+
|
||||
+ for (i = 0; i < UPM_DATA_SIZE; ++i) {
|
||||
+ data[i] = EMPTY;
|
||||
+ }
|
||||
+
|
||||
+ if (conv_upm_table(cfUpmReadSingle, mode, info, data + UPM_READ_SINGLE_OFFSET)) {
|
||||
+ return -1;
|
||||
+ }
|
||||
+ if (conv_upm_table(cfUpmWriteSingle, mode, info, data + UPM_WRITE_SINGLE_OFFSET)) {
|
||||
+ return -1;
|
||||
+ }
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void rbppc_cf_program_upm(void *upmMemAddr, volatile void *lbcfg_mxmr, volatile void *lbcfg_mdr, const unsigned *upmData, unsigned offset, unsigned len) {
|
||||
+ unsigned i;
|
||||
+ unsigned mxmr;
|
||||
+
|
||||
+ mxmr = in_be32(lbcfg_mxmr);
|
||||
+ mxmr &= ~(MxMR_OP_MASK | MxMR_MAD_MASK);
|
||||
+ mxmr |= (MxMR_OP_WRITE | offset);
|
||||
+ out_be32(lbcfg_mxmr, mxmr);
|
||||
+ in_be32(lbcfg_mxmr); /* flush MxMR write */
|
||||
+
|
||||
+ for (i = 0; i < len; ++i) {
|
||||
+ int to;
|
||||
+ unsigned data = upmData[i + offset];
|
||||
+ out_be32(lbcfg_mdr, data);
|
||||
+ in_be32(lbcfg_mdr); /* flush MDR write */
|
||||
+
|
||||
+ iowrite8(1, upmMemAddr); /* dummy write to any CF addr */
|
||||
+
|
||||
+ /* wait for dummy write to complete */
|
||||
+ for (to = 10000; to >= 0; --to) {
|
||||
+ mxmr = in_be32(lbcfg_mxmr);
|
||||
+ if (((mxmr ^ (i + 1)) & MxMR_MAD_MASK) == 0) {
|
||||
+ break;
|
||||
+ }
|
||||
+ if (to == 0) {
|
||||
+ printk(KERN_ERR "rbppc_cf_program_upm: UPMx program error at 0x%x: Timeout\n", i);
|
||||
+ }
|
||||
+ }
|
||||
+ }
|
||||
+ mxmr &= ~(MxMR_OP_MASK | MxMR_RLF_MASK | MxMR_WLF_MASK);
|
||||
+ mxmr |= (MxMR_OP_NORMAL | (LOOP_SIZE << MxMR_RLF_SHIFT) | (LOOP_SIZE << MxMR_WLF_SHIFT));
|
||||
+ out_be32(lbcfg_mxmr, mxmr);
|
||||
+}
|
||||
+
|
||||
+static int rbppc_cf_update_piomode(struct ata_port *ap, int mode) {
|
||||
+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
|
||||
+ void *lbcfgBase;
|
||||
+ unsigned upmData[UPM_DATA_SIZE];
|
||||
+
|
||||
+ if (gen_upm_data(mode, info, upmData)) {
|
||||
+ return -1;
|
||||
+ }
|
||||
+
|
||||
+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
|
||||
+
|
||||
+ rbppc_cf_program_upm(ap->ioaddr.cmd_addr, ((char *)lbcfgBase) + LOCAL_BUS_MCMR, ((char *)lbcfgBase) + LOCAL_BUS_MDR, upmData, 0, UPM_DATA_SIZE);
|
||||
+ iounmap(lbcfgBase);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void rbppc_cf_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||
+{
|
||||
+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
|
||||
+ int mode = adev->pio_mode - XFER_PIO_0;
|
||||
+
|
||||
+ DPRINTK("rbppc_cf_set_piomode: PIO %d\n", mode);
|
||||
+ if (mode < 0) mode = 0;
|
||||
+ if (mode > 6) mode = 6;
|
||||
+
|
||||
+ if (info->cur_mode < 0 || info->cur_mode > mode) {
|
||||
+ if (rbppc_cf_update_piomode(ap, mode) == 0) {
|
||||
+ printk(KERN_INFO "rbppc_cf_set_piomode: PIO mode changed to %d\n", mode);
|
||||
+ info->cur_mode = mode;
|
||||
+ }
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static struct scsi_host_template rbppc_cf_sht = {
|
||||
+ ATA_BASE_SHT(DRV_NAME),
|
||||
+};
|
||||
+
|
||||
+static struct ata_port_operations rbppc_cf_port_ops = {
|
||||
+ .inherits = &ata_bmdma_port_ops,
|
||||
+
|
||||
+ .sff_check_status = rbppc_cf_check_status,
|
||||
+ .sff_check_altstatus = rbppc_cf_check_altstatus,
|
||||
+
|
||||
+ .set_piomode = rbppc_cf_set_piomode,
|
||||
+
|
||||
+ .port_start = rbppc_cf_dummy_ret0,
|
||||
+
|
||||
+ .sff_irq_clear = rbppc_cf_dummy_noret,
|
||||
+};
|
||||
+
|
||||
+static int rbppc_cf_init_info(struct of_device *pdev, struct rbppc_cf_info *info) {
|
||||
+ struct device_node *np;
|
||||
+ struct resource res;
|
||||
+ const u32 *u32ptr;
|
||||
+ void *lbcfgBase;
|
||||
+ void *lbcfg_lcrr;
|
||||
+ unsigned lbc_clk_khz;
|
||||
+ unsigned lbc_extra_divider = 1;
|
||||
+ unsigned ccb_freq_hz;
|
||||
+ unsigned lb_div;
|
||||
+
|
||||
+ u32ptr = of_get_property(pdev->node, "lbc_extra_divider", NULL);
|
||||
+ if (u32ptr && *u32ptr) {
|
||||
+ lbc_extra_divider = *u32ptr;
|
||||
+#if DEBUG_UPM
|
||||
+ printk(KERN_INFO "rbppc_cf_init_info: LBC extra divider %u\n",
|
||||
+ lbc_extra_divider);
|
||||
+#endif
|
||||
+ }
|
||||
+
|
||||
+ np = of_find_node_by_type(NULL, "serial");
|
||||
+ if (!np) {
|
||||
+ printk(KERN_ERR "rbppc_cf_init_info: No serial node found\n");
|
||||
+ return -1;
|
||||
+ }
|
||||
+ u32ptr = of_get_property(np, "clock-frequency", NULL);
|
||||
+ if (u32ptr == 0 || *u32ptr == 0) {
|
||||
+ printk(KERN_ERR "rbppc_cf_init_info: Serial does not have clock-frequency\n");
|
||||
+ of_node_put(np);
|
||||
+ return -1;
|
||||
+ }
|
||||
+ ccb_freq_hz = *u32ptr;
|
||||
+ of_node_put(np);
|
||||
+
|
||||
+ np = of_find_node_by_type(NULL, "soc");
|
||||
+ if (!np) {
|
||||
+ printk(KERN_ERR "rbppc_cf_init_info: No soc node found\n");
|
||||
+ return -1;
|
||||
+ }
|
||||
+ if (of_address_to_resource(np, 0, &res)) {
|
||||
+ printk(KERN_ERR "rbppc_cf_init_info: soc does not have resource\n");
|
||||
+ of_node_put(np);
|
||||
+ return -1;
|
||||
+ }
|
||||
+ info->lbcfg_addr = res.start + IMMR_LBCFG_OFFSET;
|
||||
+ of_node_put(np);
|
||||
+
|
||||
+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
|
||||
+ lbcfg_lcrr = ((char*)lbcfgBase) + LOCAL_BUS_LCRR;
|
||||
+ lb_div = (in_be32(lbcfg_lcrr) & LCRR_CLKDIV_MASK) * lbc_extra_divider;
|
||||
+ iounmap(lbcfgBase);
|
||||
+
|
||||
+ lbc_clk_khz = ccb_freq_hz / (1000 * lb_div);
|
||||
+ info->clk_time_ps = 1000000000 / lbc_clk_khz;
|
||||
+ printk(KERN_INFO "rbppc_cf_init_info: Using Local-Bus clock %u kHz %u ps\n",
|
||||
+ lbc_clk_khz, info->clk_time_ps);
|
||||
+
|
||||
+ u32ptr = of_get_property(pdev->node, "lb-timings", NULL);
|
||||
+ if (u32ptr) {
|
||||
+ memcpy(info->lb_timings, u32ptr, LBT_SIZE * sizeof(*u32ptr));
|
||||
+#if DEBUG_UPM
|
||||
+ printk(KERN_INFO "rbppc_cf_init_info: Got LB timings <%u %u %u %u %u>\n",
|
||||
+ u32ptr[0], u32ptr[1], u32ptr[2], u32ptr[3], u32ptr[4]);
|
||||
+#endif
|
||||
+ }
|
||||
+ info->cur_mode = -1;
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int rbppc_cf_probe(struct of_device *pdev,
|
||||
+ const struct of_device_id *match)
|
||||
+{
|
||||
+ struct ata_host *host;
|
||||
+ struct ata_port *ap;
|
||||
+ struct rbppc_cf_info *info = NULL;
|
||||
+ struct resource res;
|
||||
+ void *baddr;
|
||||
+ const u32 *u32ptr;
|
||||
+ int irq_level = 0;
|
||||
+ int err = -ENOMEM;
|
||||
+
|
||||
+ printk(KERN_INFO "rbppc_cf_probe: MikroTik RouterBOARD 600 series Compact Flash PATA driver, version " DRV_VERSION "\n");
|
||||
+
|
||||
+ if (rbinfo == NULL) {
|
||||
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
|
||||
+ if (info == NULL) {
|
||||
+ printk(KERN_ERR "rbppc_cf_probe: Out of memory\n");
|
||||
+ goto err_info;
|
||||
+ }
|
||||
+ memset(info, 0, sizeof(*info));
|
||||
+
|
||||
+ if (rbppc_cf_init_info(pdev, info)) {
|
||||
+ goto err_info;
|
||||
+ }
|
||||
+ rbinfo = info;
|
||||
+ }
|
||||
+
|
||||
+ u32ptr = of_get_property(pdev->node, "interrupt-at-level", NULL);
|
||||
+ if (u32ptr) {
|
||||
+ irq_level = *u32ptr;
|
||||
+ printk(KERN_INFO "rbppc_cf_probe: IRQ level %u\n", irq_level);
|
||||
+ }
|
||||
+
|
||||
+ if (of_address_to_resource(pdev->node, 0, &res)) {
|
||||
+ printk(KERN_ERR "rbppc_cf_probe: No reg property found\n");
|
||||
+ goto err_info;
|
||||
+ }
|
||||
+
|
||||
+ host = ata_host_alloc(&pdev->dev, 1);
|
||||
+ if (!host)
|
||||
+ goto err_info;
|
||||
+
|
||||
+ baddr = localbus_map(res.start, res.end - res.start + 1);
|
||||
+ host->iomap = baddr;
|
||||
+ host->private_data = rbinfo;
|
||||
+
|
||||
+ ap = host->ports[0];
|
||||
+ ap->ops = &rbppc_cf_port_ops;
|
||||
+ ap->pio_mask = 0x7F; /* PIO modes 0-6 */
|
||||
+ ap->flags = ATA_FLAG_NO_LEGACY;
|
||||
+ ap->mwdma_mask = 0;
|
||||
+
|
||||
+ ap->ioaddr.cmd_addr = baddr;
|
||||
+ ata_sff_std_ports(&ap->ioaddr);
|
||||
+ ap->ioaddr.ctl_addr = ap->ioaddr.cmd_addr + 14;
|
||||
+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
|
||||
+ ap->ioaddr.bmdma_addr = 0;
|
||||
+
|
||||
+ err = ata_host_activate(
|
||||
+ host,
|
||||
+ irq_of_parse_and_map(pdev->node, 0), ata_sff_interrupt,
|
||||
+ irq_level ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW,
|
||||
+ &rbppc_cf_sht);
|
||||
+ if (!err) return 0;
|
||||
+
|
||||
+ localbus_unmap(baddr);
|
||||
+err_info:
|
||||
+ if (info) {
|
||||
+ kfree(info);
|
||||
+ rbinfo = NULL;
|
||||
+ }
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static int rbppc_cf_remove(struct of_device *pdev)
|
||||
+{
|
||||
+ struct device *dev = &pdev->dev;
|
||||
+ struct ata_host *host = dev_get_drvdata(dev);
|
||||
+
|
||||
+ if (host == NULL) return -1;
|
||||
+
|
||||
+ ata_host_detach(host);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct of_device_id rbppc_cf_ids[] = {
|
||||
+ { .name = "cf", },
|
||||
+ { },
|
||||
+};
|
||||
+
|
||||
+static struct of_platform_driver rbppc_cf_driver = {
|
||||
+ .name = "cf",
|
||||
+ .probe = rbppc_cf_probe,
|
||||
+ .remove = rbppc_cf_remove,
|
||||
+ .match_table = rbppc_cf_ids,
|
||||
+ .driver = {
|
||||
+ .name = "rbppc-cf",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static int __init rbppc_init(void)
|
||||
+{
|
||||
+ return of_register_platform_driver(&rbppc_cf_driver);
|
||||
+}
|
||||
+
|
||||
+static void __exit rbppc_exit(void)
|
||||
+{
|
||||
+ of_unregister_platform_driver(&rbppc_cf_driver);
|
||||
+}
|
||||
+
|
||||
+MODULE_AUTHOR("Mikrotikls SIA");
|
||||
+MODULE_AUTHOR("Noah Fontes");
|
||||
+MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series Compact Flash PATA driver");
|
||||
+MODULE_LICENSE("GPL");
|
||||
+MODULE_VERSION(DRV_VERSION);
|
||||
+
|
||||
+module_init(rbppc_init);
|
||||
+module_exit(rbppc_exit);
|
||||
@ -1,16 +0,0 @@
|
||||
--- a/drivers/mtd/nand/Kconfig
|
||||
+++ b/drivers/mtd/nand/Kconfig
|
||||
@@ -439,6 +439,13 @@ config MTD_NAND_PLATFORM
|
||||
devices. You will need to provide platform-specific functions
|
||||
via platform_data.
|
||||
|
||||
+config MTD_NAND_RB_PPC
|
||||
+ tristate "MikroTik RB600 NAND support"
|
||||
+ depends on MTD_NAND && MTD_PARTITIONS && RB_PPC
|
||||
+ help
|
||||
+ This option enables support for the NAND device on MikroTik
|
||||
+ RouterBOARD 600 series boards.
|
||||
+
|
||||
config MTD_ALAUDA
|
||||
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
|
||||
depends on USB
|
||||
@ -1,10 +0,0 @@
|
||||
--- a/drivers/mtd/nand/Makefile
|
||||
+++ b/drivers/mtd/nand/Makefile
|
||||
@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
|
||||
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB_PPC) += rbppc_nand.o
|
||||
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
||||
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
|
||||
@ -1,255 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/drivers/mtd/nand/rbppc_nand.c
|
||||
@@ -0,0 +1,252 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
|
||||
+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
|
||||
+ * Copyright (C) Mikrotik 2007
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License as published by the
|
||||
+ * Free Software Foundation; either version 2 of the License, or (at your
|
||||
+ * option) any later version.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/mtd/nand.h>
|
||||
+#include <linux/mtd/mtd.h>
|
||||
+#include <linux/mtd/partitions.h>
|
||||
+#include <linux/of_platform.h>
|
||||
+#include <asm/of_platform.h>
|
||||
+#include <asm/of_device.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <asm/io.h>
|
||||
+
|
||||
+#define DRV_NAME "rbppc_nand"
|
||||
+#define DRV_VERSION "0.0.2"
|
||||
+
|
||||
+static struct mtd_info rmtd;
|
||||
+static struct nand_chip rnand;
|
||||
+
|
||||
+struct rbppc_nand_info {
|
||||
+ void *gpi;
|
||||
+ void *gpo;
|
||||
+ void *localbus;
|
||||
+
|
||||
+ unsigned gpio_rdy;
|
||||
+ unsigned gpio_nce;
|
||||
+ unsigned gpio_cle;
|
||||
+ unsigned gpio_ale;
|
||||
+ unsigned gpio_ctrls;
|
||||
+};
|
||||
+
|
||||
+/* We must use the OOB layout from yaffs 1 if we want this to be recognized
|
||||
+ * properly. Borrowed from the OpenWRT patches for the RB532.
|
||||
+ *
|
||||
+ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
|
||||
+ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
|
||||
+ */
|
||||
+static struct nand_ecclayout rbppc_nand_oob_16 = {
|
||||
+ .eccbytes = 6,
|
||||
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
|
||||
+ .oobavail = 9,
|
||||
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
|
||||
+};
|
||||
+
|
||||
+static struct mtd_partition rbppc_nand_partition_info[] = {
|
||||
+ {
|
||||
+ name: "kernel",
|
||||
+ offset: 0,
|
||||
+ size: 4 * 1024 * 1024,
|
||||
+ },
|
||||
+ {
|
||||
+ name: "rootfs",
|
||||
+ offset: MTDPART_OFS_NXTBLK,
|
||||
+ size: MTDPART_SIZ_FULL,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
|
||||
+ struct nand_chip *chip = mtd->priv;
|
||||
+ struct rbppc_nand_info *priv = chip->priv;
|
||||
+
|
||||
+ return in_be32(priv->gpi) & priv->gpio_rdy;
|
||||
+}
|
||||
+
|
||||
+static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
|
||||
+ struct nand_chip *chip = mtd->priv;
|
||||
+ struct rbppc_nand_info *priv = chip->priv;
|
||||
+
|
||||
+ if (ctrl & NAND_CTRL_CHANGE) {
|
||||
+ unsigned val = in_be32(priv->gpo);
|
||||
+ if (!(val & priv->gpio_nce)) {
|
||||
+ /* make sure Local Bus has done NAND operations */
|
||||
+ readb(priv->localbus);
|
||||
+ }
|
||||
+
|
||||
+ if (ctrl & NAND_CLE) {
|
||||
+ val |= priv->gpio_cle;
|
||||
+ } else {
|
||||
+ val &= ~priv->gpio_cle;
|
||||
+ }
|
||||
+ if (ctrl & NAND_ALE) {
|
||||
+ val |= priv->gpio_ale;
|
||||
+ } else {
|
||||
+ val &= ~priv->gpio_ale;
|
||||
+ }
|
||||
+ if (!(ctrl & NAND_NCE)) {
|
||||
+ val |= priv->gpio_nce;
|
||||
+ } else {
|
||||
+ val &= ~priv->gpio_nce;
|
||||
+ }
|
||||
+ out_be32(priv->gpo, val);
|
||||
+
|
||||
+ /* make sure GPIO output has changed */
|
||||
+ val ^= in_be32(priv->gpo);
|
||||
+ if (val & priv->gpio_ctrls) {
|
||||
+ printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
|
||||
+}
|
||||
+
|
||||
+static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
|
||||
+{
|
||||
+ struct nand_chip *chip = mtd->priv;
|
||||
+ memcpy(buf, chip->IO_ADDR_R, len);
|
||||
+}
|
||||
+
|
||||
+static unsigned init_ok = 0;
|
||||
+
|
||||
+static int rbppc_nand_probe(struct of_device *pdev,
|
||||
+ const struct of_device_id *match)
|
||||
+{
|
||||
+ struct device_node *gpio;
|
||||
+ struct device_node *nnand;
|
||||
+ struct resource res;
|
||||
+ struct rbppc_nand_info *info;
|
||||
+ void *baddr;
|
||||
+ const unsigned *rdy, *nce, *cle, *ale;
|
||||
+
|
||||
+ printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 600 series NAND driver, version " DRV_VERSION "\n");
|
||||
+
|
||||
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
|
||||
+
|
||||
+ rdy = of_get_property(pdev->node, "rdy", NULL);
|
||||
+ nce = of_get_property(pdev->node, "nce", NULL);
|
||||
+ cle = of_get_property(pdev->node, "cle", NULL);
|
||||
+ ale = of_get_property(pdev->node, "ale", NULL);
|
||||
+
|
||||
+ if (!rdy || !nce || !cle || !ale) {
|
||||
+ printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
|
||||
+ goto err;
|
||||
+ }
|
||||
+ if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
|
||||
+ printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
|
||||
+ goto err;
|
||||
+ }
|
||||
+
|
||||
+ gpio = of_find_node_by_phandle(rdy[0]);
|
||||
+ if (!gpio) {
|
||||
+ printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
|
||||
+ goto err;
|
||||
+ }
|
||||
+ if (of_address_to_resource(gpio, 0, &res)) {
|
||||
+ printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
|
||||
+ goto err;
|
||||
+ }
|
||||
+ info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
|
||||
+
|
||||
+ if (!of_address_to_resource(gpio, 1, &res)) {
|
||||
+ info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
|
||||
+ } else {
|
||||
+ info->gpi = info->gpo;
|
||||
+ }
|
||||
+ of_node_put(gpio);
|
||||
+
|
||||
+ info->gpio_rdy = 1 << (31 - rdy[1]);
|
||||
+ info->gpio_nce = 1 << (31 - nce[1]);
|
||||
+ info->gpio_cle = 1 << (31 - cle[1]);
|
||||
+ info->gpio_ale = 1 << (31 - ale[1]);
|
||||
+ info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
|
||||
+
|
||||
+ nnand = of_find_node_by_name(NULL, "nnand");
|
||||
+ if (!nnand) {
|
||||
+ printk("rbppc_nand_probe: No nNAND found\n");
|
||||
+ goto err;
|
||||
+ }
|
||||
+ if (of_address_to_resource(nnand, 0, &res)) {
|
||||
+ printk("rbppc_nand_probe: No reg property in nNAND found\n");
|
||||
+ goto err;
|
||||
+ }
|
||||
+ of_node_put(nnand);
|
||||
+ info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
|
||||
+
|
||||
+ if (of_address_to_resource(pdev->node, 0, &res)) {
|
||||
+ printk("rbppc_nand_probe: No reg property found\n");
|
||||
+ goto err;
|
||||
+ }
|
||||
+ baddr = ioremap_nocache(res.start, res.end - res.start + 1);
|
||||
+
|
||||
+ memset(&rnand, 0, sizeof(rnand));
|
||||
+ rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
|
||||
+ rnand.dev_ready = rbppc_nand_dev_ready;
|
||||
+ rnand.read_buf = rbppc_nand_read_buf;
|
||||
+ rnand.IO_ADDR_W = baddr;
|
||||
+ rnand.IO_ADDR_R = baddr;
|
||||
+ rnand.priv = info;
|
||||
+
|
||||
+ memset(&rmtd, 0, sizeof(rmtd));
|
||||
+ rnand.ecc.mode = NAND_ECC_SOFT;
|
||||
+ rnand.ecc.layout = &rbppc_nand_oob_16;
|
||||
+ rnand.chip_delay = 25;
|
||||
+ rnand.options |= NAND_NO_AUTOINCR;
|
||||
+ rmtd.priv = &rnand;
|
||||
+ rmtd.owner = THIS_MODULE;
|
||||
+
|
||||
+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
|
||||
+ printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
|
||||
+ return -ENXIO;
|
||||
+ }
|
||||
+
|
||||
+ add_mtd_partitions(&rmtd, rbppc_nand_partition_info, 2);
|
||||
+ init_ok = 1;
|
||||
+ return 0;
|
||||
+
|
||||
+err:
|
||||
+ kfree(info);
|
||||
+ return -1;
|
||||
+}
|
||||
+
|
||||
+static struct of_device_id rbppc_nand_ids[] = {
|
||||
+ { .name = "nand", },
|
||||
+ { },
|
||||
+};
|
||||
+
|
||||
+static struct of_platform_driver rbppc_nand_driver = {
|
||||
+ .name = "nand",
|
||||
+ .probe = rbppc_nand_probe,
|
||||
+ .match_table = rbppc_nand_ids,
|
||||
+ .driver = {
|
||||
+ .name = "rbppc-nand",
|
||||
+ .owner = THIS_MODULE,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static int __init rbppc_nand_init(void)
|
||||
+{
|
||||
+ return of_register_platform_driver(&rbppc_nand_driver);
|
||||
+}
|
||||
+
|
||||
+static void __exit rbppc_nand_exit(void)
|
||||
+{
|
||||
+ of_unregister_platform_driver(&rbppc_nand_driver);
|
||||
+}
|
||||
+
|
||||
+MODULE_AUTHOR("Mikrotikls SIA");
|
||||
+MODULE_AUTHOR("Noah Fontes");
|
||||
+MODULE_AUTHOR("Michael Guntsche");
|
||||
+MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series NAND driver");
|
||||
+MODULE_LICENSE("GPL");
|
||||
+MODULE_VERSION(DRV_VERSION);
|
||||
+
|
||||
+module_init(rbppc_nand_init);
|
||||
+module_exit(rbppc_nand_exit);
|
||||
@ -1,319 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/platforms/83xx/rbppc.c
|
||||
@@ -0,0 +1,316 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
|
||||
+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
|
||||
+ * Copyright (C) Mikrotik 2007
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License as published by the
|
||||
+ * Free Software Foundation; either version 2 of the License, or (at your
|
||||
+ * option) any later version.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/root_dev.h>
|
||||
+#include <linux/initrd.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/of_platform.h>
|
||||
+#include <linux/of_device.h>
|
||||
+#include <linux/of_platform.h>
|
||||
+#include <asm/time.h>
|
||||
+#include <asm/ipic.h>
|
||||
+#include <asm/udbg.h>
|
||||
+#include <asm/qe.h>
|
||||
+#include <asm/qe_ic.h>
|
||||
+#include <sysdev/fsl_soc.h>
|
||||
+#include <sysdev/fsl_pci.h>
|
||||
+#include "mpc83xx.h"
|
||||
+
|
||||
+#define SYSCTL 0x100
|
||||
+#define SICRL 0x014
|
||||
+
|
||||
+#define GTCFR2 0x04
|
||||
+#define GTMDR4 0x22
|
||||
+#define GTRFR4 0x26
|
||||
+#define GTCNR4 0x2e
|
||||
+#define GTVER4 0x36
|
||||
+#define GTPSR4 0x3e
|
||||
+
|
||||
+#define GTCFR_BCM 0x40
|
||||
+#define GTCFR_STP4 0x20
|
||||
+#define GTCFR_RST4 0x10
|
||||
+#define GTCFR_STP3 0x02
|
||||
+#define GTCFR_RST3 0x01
|
||||
+
|
||||
+#define GTMDR_ORI 0x10
|
||||
+#define GTMDR_FRR 0x08
|
||||
+#define GTMDR_ICLK16 0x04
|
||||
+
|
||||
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
|
||||
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
|
||||
+ int assignment, int has_irq);
|
||||
+
|
||||
+static unsigned timer_freq;
|
||||
+static void *gtm;
|
||||
+
|
||||
+static int beeper_irq;
|
||||
+static unsigned beeper_gpio_pin[2];
|
||||
+
|
||||
+irqreturn_t rbppc_timer_irq(int irq, void *ptr)
|
||||
+{
|
||||
+ static int toggle = 0;
|
||||
+
|
||||
+ par_io_data_set(beeper_gpio_pin[0], beeper_gpio_pin[1], toggle);
|
||||
+ toggle = !toggle;
|
||||
+
|
||||
+ /* ack interrupt */
|
||||
+ out_be16(gtm + GTVER4, 3);
|
||||
+
|
||||
+ return IRQ_HANDLED;
|
||||
+}
|
||||
+
|
||||
+void rbppc_beep(unsigned freq)
|
||||
+{
|
||||
+ unsigned gtmdr;
|
||||
+
|
||||
+ if (freq > 5000) freq = 5000;
|
||||
+
|
||||
+ if (!gtm)
|
||||
+ return;
|
||||
+ if (!freq) {
|
||||
+ out_8(gtm + GTCFR2, GTCFR_STP4 | GTCFR_STP3);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ out_8(gtm + GTCFR2, GTCFR_RST4 | GTCFR_STP3);
|
||||
+ out_be16(gtm + GTPSR4, 255);
|
||||
+ gtmdr = GTMDR_FRR | GTMDR_ICLK16;
|
||||
+ if (beeper_irq != NO_IRQ) gtmdr |= GTMDR_ORI;
|
||||
+ out_be16(gtm + GTMDR4, gtmdr);
|
||||
+ out_be16(gtm + GTVER4, 3);
|
||||
+
|
||||
+ out_be16(gtm + GTRFR4, timer_freq / 16 / 256 / freq / 2);
|
||||
+ out_be16(gtm + GTCNR4, 0);
|
||||
+}
|
||||
+EXPORT_SYMBOL(rbppc_beep);
|
||||
+
|
||||
+static void __init rbppc_setup_arch(void)
|
||||
+{
|
||||
+ struct device_node *np;
|
||||
+
|
||||
+ np = of_find_node_by_type(NULL, "cpu");
|
||||
+ if (np) {
|
||||
+ const unsigned *fp = of_get_property(np, "clock-frequency", NULL);
|
||||
+ loops_per_jiffy = fp ? *fp / HZ : 0;
|
||||
+
|
||||
+ of_node_put(np);
|
||||
+ }
|
||||
+
|
||||
+ np = of_find_node_by_name(NULL, "serial");
|
||||
+ if (np) {
|
||||
+ timer_freq =
|
||||
+ *(unsigned *) of_get_property(np, "clock-frequency", NULL);
|
||||
+ of_node_put(np);
|
||||
+ }
|
||||
+
|
||||
+#ifdef CONFIG_PCI
|
||||
+ np = of_find_node_by_type(NULL, "pci");
|
||||
+ if (np) {
|
||||
+ mpc83xx_add_bridge(np);
|
||||
+ }
|
||||
+#endif
|
||||
+
|
||||
+#ifdef CONFIG_QUICC_ENGINE
|
||||
+ np = of_find_node_by_name(np, "par_io");
|
||||
+ if (np) {
|
||||
+ qe_reset();
|
||||
+ par_io_init(np);
|
||||
+ of_node_put(np);
|
||||
+
|
||||
+ np = NULL;
|
||||
+ while (1) {
|
||||
+ np = of_find_node_by_name(np, "ucc");
|
||||
+ if (!np) break;
|
||||
+
|
||||
+ par_io_of_config(np);
|
||||
+ }
|
||||
+ }
|
||||
+#endif
|
||||
+
|
||||
+}
|
||||
+
|
||||
+void __init rbppc_init_IRQ(void)
|
||||
+{
|
||||
+ struct device_node *np;
|
||||
+
|
||||
+ np = of_find_node_by_type(NULL, "ipic");
|
||||
+ if (np) {
|
||||
+ ipic_init(np, 0);
|
||||
+ ipic_set_default_priority();
|
||||
+ of_node_put(np);
|
||||
+ }
|
||||
+
|
||||
+#ifdef CONFIG_QUICC_ENGINE
|
||||
+ np = of_find_node_by_type(NULL, "qeic");
|
||||
+ if (np) {
|
||||
+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
|
||||
+ of_node_put(np);
|
||||
+ }
|
||||
+#endif
|
||||
+}
|
||||
+
|
||||
+static int __init rbppc_probe(void)
|
||||
+{
|
||||
+ char *model;
|
||||
+
|
||||
+ model = of_get_flat_dt_prop(of_get_flat_dt_root(), "model", NULL);
|
||||
+
|
||||
+ if (!model)
|
||||
+ return 0;
|
||||
+
|
||||
+ if (strcmp(model, "RB600") == 0)
|
||||
+ return 1;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void __init rbppc_beeper_init(struct device_node *beeper)
|
||||
+{
|
||||
+ struct resource res;
|
||||
+ struct device_node *gpio;
|
||||
+ const unsigned *pin;
|
||||
+ const unsigned *gpio_id;
|
||||
+
|
||||
+ if (of_address_to_resource(beeper, 0, &res)) {
|
||||
+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No region specified\n", beeper->full_name);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ pin = of_get_property(beeper, "gpio", NULL);
|
||||
+ if (pin) {
|
||||
+ gpio = of_find_node_by_phandle(pin[0]);
|
||||
+
|
||||
+ if (!gpio) {
|
||||
+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: GPIO handle %x not found\n", beeper->full_name, pin[0]);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ gpio_id = of_get_property(gpio, "device-id", NULL);
|
||||
+ if (!gpio_id) {
|
||||
+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No device-id specified in GPIO\n", beeper->full_name);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ beeper_gpio_pin[0] = *gpio_id;
|
||||
+ beeper_gpio_pin[1] = pin[1];
|
||||
+
|
||||
+ par_io_config_pin(*gpio_id, pin[1], 1, 0, 0, 0);
|
||||
+ } else {
|
||||
+ void *sysctl;
|
||||
+
|
||||
+ sysctl = ioremap_nocache(get_immrbase() + SYSCTL, 0x100);
|
||||
+ out_be32(sysctl + SICRL,
|
||||
+ in_be32(sysctl + SICRL) | (1 << (31 - 19)));
|
||||
+ iounmap(sysctl);
|
||||
+ }
|
||||
+
|
||||
+ gtm = ioremap_nocache(res.start, res.end - res.start + 1);
|
||||
+
|
||||
+ beeper_irq = irq_of_parse_and_map(beeper, 0);
|
||||
+ if (beeper_irq != NO_IRQ) {
|
||||
+ int e = request_irq(beeper_irq, rbppc_timer_irq, 0, "beeper", NULL);
|
||||
+ if (e) {
|
||||
+ printk(KERN_ERR "rbppc_beeper_init(%s): Request of beeper irq failed!\n", beeper->full_name);
|
||||
+ }
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+#define SBIT(x) (0x80000000 >> (x))
|
||||
+#define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2)))
|
||||
+
|
||||
+#define SICRL_RB600(x) ((x) + (0x114 >> 2))
|
||||
+#define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2))
|
||||
+#define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2))
|
||||
+
|
||||
+static void rbppc_restart(char *cmd)
|
||||
+{
|
||||
+ __be32 __iomem *reg;
|
||||
+
|
||||
+ reg = ioremap(get_immrbase(), 0x1000);
|
||||
+ local_irq_disable();
|
||||
+ out_be32(SICRL_RB600(reg), in_be32(SICRL_RB600(reg)) & ~0x00800000);
|
||||
+ out_be32(GPIO_DIR_RB600(reg), in_be32(GPIO_DIR_RB600(reg)) | SBIT(2));
|
||||
+ out_be32(GPIO_DATA_RB600(reg), in_be32(GPIO_DATA_RB600(reg)) & ~SBIT(2));
|
||||
+
|
||||
+ while (1);
|
||||
+}
|
||||
+
|
||||
+static void rbppc_halt(void)
|
||||
+{
|
||||
+ while (1);
|
||||
+}
|
||||
+
|
||||
+static struct of_device_id rbppc_ids[] = {
|
||||
+ { .type = "soc", },
|
||||
+ { .compatible = "soc", },
|
||||
+ { .compatible = "simple-bus", },
|
||||
+ { .compatible = "gianfar", },
|
||||
+ { },
|
||||
+};
|
||||
+
|
||||
+static int __init rbppc_declare_of_platform_devices(void)
|
||||
+{
|
||||
+ struct device_node *np;
|
||||
+ unsigned idx;
|
||||
+
|
||||
+ of_platform_bus_probe(NULL, rbppc_ids, NULL);
|
||||
+
|
||||
+ np = of_find_node_by_type(NULL, "mdio");
|
||||
+ if (np) {
|
||||
+ unsigned len;
|
||||
+ unsigned *res;
|
||||
+ const unsigned *eres;
|
||||
+ struct device_node *ep;
|
||||
+
|
||||
+ ep = of_find_compatible_node(NULL, "network", "ucc_geth");
|
||||
+ if (ep) {
|
||||
+ eres = of_get_property(ep, "reg", &len);
|
||||
+ res = (unsigned *) of_get_property(np, "reg", &len);
|
||||
+ if (res && eres) {
|
||||
+ res[0] = eres[0] + 0x120;
|
||||
+ }
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
+ np = of_find_node_by_name(NULL, "nand");
|
||||
+ if (np) {
|
||||
+ of_platform_device_create(np, "nand", NULL);
|
||||
+ }
|
||||
+
|
||||
+ idx = 0;
|
||||
+ for_each_node_by_type(np, "rb,cf") {
|
||||
+ char dev_name[12];
|
||||
+ snprintf(dev_name, sizeof(dev_name), "cf.%u", idx);
|
||||
+ of_platform_device_create(np, dev_name, NULL);
|
||||
+ ++idx;
|
||||
+ }
|
||||
+
|
||||
+ np = of_find_node_by_name(NULL, "beeper");
|
||||
+ if (np) {
|
||||
+ rbppc_beeper_init(np);
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+device_initcall(rbppc_declare_of_platform_devices);
|
||||
+
|
||||
+define_machine(rb600) {
|
||||
+ .name = "MikroTik RouterBOARD 600 series",
|
||||
+ .probe = rbppc_probe,
|
||||
+ .setup_arch = rbppc_setup_arch,
|
||||
+ .init_IRQ = rbppc_init_IRQ,
|
||||
+ .get_irq = ipic_get_irq,
|
||||
+ .restart = rbppc_restart,
|
||||
+ .halt = rbppc_halt,
|
||||
+ .time_init = mpc83xx_time_init,
|
||||
+ .calibrate_decr = generic_calibrate_decr,
|
||||
+};
|
||||
@ -1,94 +0,0 @@
|
||||
--- a/arch/powerpc/Makefile
|
||||
+++ b/arch/powerpc/Makefile
|
||||
@@ -166,7 +166,8 @@ all: zImage
|
||||
|
||||
# With make 3.82 we cannot mix normal and wildcard targets
|
||||
BOOT_TARGETS1 := zImage zImage.initrd uImage
|
||||
-BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
|
||||
+BOOT_TARGETS2 := uImage.fit.% zImage% dtbImage% treeImage.% cuImage.% \
|
||||
+ simpleImage.%
|
||||
|
||||
PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
|
||||
|
||||
@@ -199,6 +200,7 @@ define archhelp
|
||||
@echo '* zImage - Build default images selected by kernel config'
|
||||
@echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
|
||||
@echo ' uImage - U-Boot native image format'
|
||||
+ @echo ' uImage.fit.<dt> - U-Boot Flattened Image Tree image format'
|
||||
@echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
|
||||
@echo ' versions which do not support device trees'
|
||||
@echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
|
||||
--- a/arch/powerpc/boot/.gitignore
|
||||
+++ b/arch/powerpc/boot/.gitignore
|
||||
@@ -19,6 +19,7 @@ kernel-vmlinux.strip.c
|
||||
kernel-vmlinux.strip.gz
|
||||
mktree
|
||||
uImage
|
||||
+uImage.fit.*
|
||||
cuImage.*
|
||||
dtbImage.*
|
||||
treeImage.*
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -314,6 +314,9 @@ $(obj)/zImage.iseries: vmlinux
|
||||
$(obj)/uImage: vmlinux $(wrapperbits)
|
||||
$(call if_changed,wrap,uboot)
|
||||
|
||||
+$(obj)/uImage.fit.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
||||
+ $(call if_changed,wrap,uboot.fit,,$(obj)/$*.dtb)
|
||||
+
|
||||
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
||||
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
||||
|
||||
@@ -353,7 +356,7 @@ install: $(CONFIGURE) $(addprefix $(obj)
|
||||
|
||||
# anything not in $(targets)
|
||||
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
|
||||
- zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
|
||||
+ uImage.* zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
|
||||
zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
|
||||
zImage.maple simpleImage.* otheros.bld *.dtb
|
||||
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -46,6 +46,9 @@ CROSS=
|
||||
# mkimage wrapper script
|
||||
MKIMAGE=$srctree/scripts/mkuboot.sh
|
||||
|
||||
+# script to generate an .its file for uImage.fit.* images
|
||||
+MKITS=$srctree/scripts/mkits.sh
|
||||
+
|
||||
# directory for object and other files used by this script
|
||||
object=arch/powerpc/boot
|
||||
objbin=$object
|
||||
@@ -161,7 +164,7 @@ coff)
|
||||
lds=$object/zImage.coff.lds
|
||||
link_address='0x500000'
|
||||
;;
|
||||
-miboot|uboot)
|
||||
+miboot|uboot|uboot.fit)
|
||||
# miboot and U-boot want just the bare bits, not an ELF binary
|
||||
ext=bin
|
||||
objflags="-O binary"
|
||||
@@ -282,6 +285,21 @@ uboot)
|
||||
if [ -z "$cacheit" ]; then
|
||||
rm -f "$vmz"
|
||||
fi
|
||||
+ exit 0
|
||||
+ ;;
|
||||
+uboot.fit)
|
||||
+ rm -f "$ofile"
|
||||
+ ${MKITS} -A ppc -C gzip -a $membase -e $membase -v $version \
|
||||
+ -d "$srctree/$dtb" -k "$srctree/$vmz" -o "$object/uImage.its"
|
||||
+
|
||||
+ # mkimage calls dtc for FIT images so use kernel dtc if necessary
|
||||
+ export PATH=$PATH:$srctree/scripts/dtc
|
||||
+
|
||||
+ ${MKIMAGE} -f "$object/uImage.its" "$ofile"
|
||||
+ rm "$object/uImage.its"
|
||||
+ if [ -z "$cacheit" ]; then
|
||||
+ rm -f "$vmz"
|
||||
+ fi
|
||||
exit 0
|
||||
;;
|
||||
esac
|
||||
@ -1,207 +0,0 @@
|
||||
--- a/arch/powerpc/platforms/83xx/rbppc.c
|
||||
+++ b/arch/powerpc/platforms/83xx/rbppc.c
|
||||
@@ -1,4 +1,5 @@
|
||||
/*
|
||||
+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
|
||||
* Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
|
||||
* Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
|
||||
* Copyright (C) Mikrotik 2007
|
||||
@@ -167,6 +168,9 @@ static int __init rbppc_probe(void)
|
||||
if (!model)
|
||||
return 0;
|
||||
|
||||
+ if (strcmp(model, "RB333") == 0)
|
||||
+ return 1;
|
||||
+
|
||||
if (strcmp(model, "RB600") == 0)
|
||||
return 1;
|
||||
|
||||
@@ -227,6 +231,9 @@ static void __init rbppc_beeper_init(str
|
||||
#define SBIT(x) (0x80000000 >> (x))
|
||||
#define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2)))
|
||||
|
||||
+#define GPIO_DIR_RB333(x) ((x) + (0x1408 >> 2))
|
||||
+#define GPIO_DATA_RB333(x) ((x) + (0x1404 >> 2))
|
||||
+
|
||||
#define SICRL_RB600(x) ((x) + (0x114 >> 2))
|
||||
#define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2))
|
||||
#define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2))
|
||||
@@ -234,14 +241,38 @@ static void __init rbppc_beeper_init(str
|
||||
static void rbppc_restart(char *cmd)
|
||||
{
|
||||
__be32 __iomem *reg;
|
||||
-
|
||||
- reg = ioremap(get_immrbase(), 0x1000);
|
||||
- local_irq_disable();
|
||||
- out_be32(SICRL_RB600(reg), in_be32(SICRL_RB600(reg)) & ~0x00800000);
|
||||
- out_be32(GPIO_DIR_RB600(reg), in_be32(GPIO_DIR_RB600(reg)) | SBIT(2));
|
||||
- out_be32(GPIO_DATA_RB600(reg), in_be32(GPIO_DATA_RB600(reg)) & ~SBIT(2));
|
||||
-
|
||||
- while (1);
|
||||
+ unsigned rb_model;
|
||||
+ struct device_node *root;
|
||||
+ unsigned int size;
|
||||
+
|
||||
+ root = of_find_node_by_path("/");
|
||||
+ if (root) {
|
||||
+ const char *prop = (char *) of_get_property(root, "model", &size);
|
||||
+ rb_model = prop[sizeof("RB") - 1] - '0';
|
||||
+ of_node_put(root);
|
||||
+ switch (rb_model) {
|
||||
+ case 3:
|
||||
+ reg = ioremap(get_immrbase(), 0x2000);
|
||||
+ local_irq_disable();
|
||||
+ out_be32(GPIO_DIR_RB333(reg),
|
||||
+ (in_be32(GPIO_DIR_RB333(reg)) & ~DBIT(4, 3)) | DBIT(4, 1));
|
||||
+ out_be32(GPIO_DATA_RB333(reg), in_be32(GPIO_DATA_RB333(reg)) & ~SBIT(4));
|
||||
+ break;
|
||||
+ case 6:
|
||||
+ reg = ioremap(get_immrbase(), 0x1000);
|
||||
+ local_irq_disable();
|
||||
+ out_be32(SICRL_RB600(reg), in_be32(SICRL_RB600(reg)) & ~0x00800000);
|
||||
+ out_be32(GPIO_DIR_RB600(reg), in_be32(GPIO_DIR_RB600(reg)) | SBIT(2));
|
||||
+ out_be32(GPIO_DATA_RB600(reg), in_be32(GPIO_DATA_RB600(reg)) & ~SBIT(2));
|
||||
+ break;
|
||||
+ default:
|
||||
+ mpc83xx_restart(cmd);
|
||||
+ break;
|
||||
+ }
|
||||
+ }
|
||||
+ else mpc83xx_restart(cmd);
|
||||
+
|
||||
+ for (;;) ;
|
||||
}
|
||||
|
||||
static void rbppc_halt(void)
|
||||
@@ -301,10 +332,10 @@ static int __init rbppc_declare_of_platf
|
||||
|
||||
return 0;
|
||||
}
|
||||
-device_initcall(rbppc_declare_of_platform_devices);
|
||||
+machine_device_initcall(rb600, rbppc_declare_of_platform_devices);
|
||||
|
||||
define_machine(rb600) {
|
||||
- .name = "MikroTik RouterBOARD 600 series",
|
||||
+ .name = "MikroTik RouterBOARD 333/600 series",
|
||||
.probe = rbppc_probe,
|
||||
.setup_arch = rbppc_setup_arch,
|
||||
.init_IRQ = rbppc_init_IRQ,
|
||||
@@ -314,3 +345,31 @@ define_machine(rb600) {
|
||||
.time_init = mpc83xx_time_init,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
};
|
||||
+
|
||||
+static void fixup_pcibridge(struct pci_dev *dev)
|
||||
+{
|
||||
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
||||
+ /* let the kernel itself set right memory windows */
|
||||
+ pci_write_config_word(dev, PCI_MEMORY_BASE, 0);
|
||||
+ pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
|
||||
+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0);
|
||||
+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
|
||||
+ pci_write_config_byte(dev, PCI_IO_BASE, 0);
|
||||
+ pci_write_config_byte(dev, PCI_IO_LIMIT, 4 << 4);
|
||||
+
|
||||
+ pci_write_config_byte(
|
||||
+ dev, PCI_COMMAND,
|
||||
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
|
||||
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+
|
||||
+static void fixup_rb604(struct pci_dev *dev)
|
||||
+{
|
||||
+ pci_write_config_byte(dev, 0xC0, 0x01);
|
||||
+}
|
||||
+
|
||||
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
|
||||
+DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)
|
||||
+
|
||||
--- a/drivers/mtd/nand/Kconfig
|
||||
+++ b/drivers/mtd/nand/Kconfig
|
||||
@@ -440,11 +440,11 @@ config MTD_NAND_PLATFORM
|
||||
via platform_data.
|
||||
|
||||
config MTD_NAND_RB_PPC
|
||||
- tristate "MikroTik RB600 NAND support"
|
||||
+ tristate "MikroTik RB 333/600 NAND support"
|
||||
depends on MTD_NAND && MTD_PARTITIONS && RB_PPC
|
||||
help
|
||||
This option enables support for the NAND device on MikroTik
|
||||
- RouterBOARD 600 series boards.
|
||||
+ RouterBOARD 333/600 series boards.
|
||||
|
||||
config MTD_ALAUDA
|
||||
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
|
||||
--- a/drivers/mtd/nand/rbppc_nand.c
|
||||
+++ b/drivers/mtd/nand/rbppc_nand.c
|
||||
@@ -126,7 +126,7 @@ static int rbppc_nand_probe(struct of_de
|
||||
void *baddr;
|
||||
const unsigned *rdy, *nce, *cle, *ale;
|
||||
|
||||
- printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 600 series NAND driver, version " DRV_VERSION "\n");
|
||||
+ printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
|
||||
|
||||
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
||||
|
||||
@@ -244,7 +244,7 @@ static void __exit rbppc_nand_exit(void)
|
||||
MODULE_AUTHOR("Mikrotikls SIA");
|
||||
MODULE_AUTHOR("Noah Fontes");
|
||||
MODULE_AUTHOR("Michael Guntsche");
|
||||
-MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series NAND driver");
|
||||
+MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
--- a/arch/powerpc/platforms/83xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/83xx/Kconfig
|
||||
@@ -39,13 +39,14 @@ config MPC832x_RDB
|
||||
This option enables support for the MPC8323 RDB board.
|
||||
|
||||
config RB_PPC
|
||||
- bool "MikroTik RouterBOARD 600 series"
|
||||
+ bool "MikroTik RouterBOARD 333/600 series"
|
||||
select DEFAULT_UIMAGE
|
||||
select QUICC_ENGINE
|
||||
+ select PPC_MPC832x
|
||||
select PPC_MPC834x
|
||||
select RB_IOMAP
|
||||
help
|
||||
- This option enables support for MikroTik RouterBOARD 600 series boards.
|
||||
+ This option enables support for MikroTik RouterBOARD 333/600 series boards.
|
||||
|
||||
config MPC834x_MDS
|
||||
bool "Freescale MPC834x MDS"
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -74,7 +74,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
|
||||
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
|
||||
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
|
||||
fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
|
||||
- cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c rb600.c \
|
||||
+ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c rb600.c rb333.c \
|
||||
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
|
||||
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
|
||||
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
|
||||
@@ -235,7 +235,8 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
|
||||
image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
|
||||
image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
|
||||
image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
|
||||
-image-$(CONFIG_RB_PPC) += dtbImage.rb600
|
||||
+image-$(CONFIG_RB_PPC) += dtbImage.rb600 \
|
||||
+ dtbImage.rb333
|
||||
|
||||
# Board ports in arch/powerpc/platform/85xx/Kconfig
|
||||
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -212,7 +212,7 @@ ps3)
|
||||
isection=.kernel:initrd
|
||||
link_address=''
|
||||
;;
|
||||
-ep88xc|ep405|ep8248e|rb600)
|
||||
+ep88xc|ep405|ep8248e|rb600|rb333)
|
||||
platformo="$object/fixed-head.o $object/$platform.o"
|
||||
binary=y
|
||||
;;
|
||||
@ -1,435 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/dts/rb333.dts
|
||||
@@ -0,0 +1,432 @@
|
||||
+
|
||||
+/*
|
||||
+ * RouterBOARD 333 series Device Tree Source
|
||||
+ *
|
||||
+ * Copyright 2010 Alexandros C. Couloumbis <alex@ozo.com>
|
||||
+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License as published by the
|
||||
+ * Free Software Foundation; either version 2 of the License, or (at your
|
||||
+ * option) any later version.
|
||||
+ *
|
||||
+ * Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
|
||||
+ * Warning (ranges_format): "ranges" property in /qe@e0100000/muram@10000 has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
|
||||
+ * Warning (avoid_default_addr_size): Relying on default #address-cells value for /qe@e0100000/muram@10000/data-only@0
|
||||
+ * Warning (avoid_default_addr_size): Relying on default #size-cells value for /qe@e0100000/muram@10000/data-only@0
|
||||
+ * Warning (obsolete_chosen_interrupt_controller): /chosen has obsolete "interrupt-controller" property
|
||||
+ *
|
||||
+ */
|
||||
+
|
||||
+
|
||||
+/dts-v1/;
|
||||
+
|
||||
+/ {
|
||||
+ model = "RB333";
|
||||
+ compatible = "MPC83xx";
|
||||
+ #size-cells = <1>;
|
||||
+ #address-cells = <1>;
|
||||
+
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &enet0;
|
||||
+ ethernet1 = &enet1;
|
||||
+ ethernet2 = &enet2;
|
||||
+ pci0 = &pci0;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
|
||||
+ // linux,platform = <0x8062>;
|
||||
+ // linux,initrd = <0x488000 0x0>;
|
||||
+ linux,stdout-path = "/soc8323@e0000000/serial@4500";
|
||||
+ // interrupt-controller = <&ipic>;
|
||||
+ };
|
||||
+
|
||||
+ cpus {
|
||||
+ #cpus = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ #address-cells = <1>;
|
||||
+
|
||||
+ PowerPC,8323E@0 {
|
||||
+ device_type = "cpu";
|
||||
+ reg = <0x0>;
|
||||
+ i-cache-size = <0x4000>;
|
||||
+ d-cache-size = <0x4000>;
|
||||
+ i-cache-line-size = <0x20>;
|
||||
+ d-cache-line-size = <0x20>;
|
||||
+ // clock-frequency = <0x13de3650>;
|
||||
+ // timebase-frequency = <0x1fc9f08>;
|
||||
+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
|
||||
+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
|
||||
+ 32-bit;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ memory {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0x0 0x4000000>;
|
||||
+ // reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
|
||||
+ };
|
||||
+
|
||||
+ flash {
|
||||
+ reg = <0xfe000000 0x20000>;
|
||||
+ };
|
||||
+
|
||||
+ nand {
|
||||
+ ale = <&gpio2 0x3>;
|
||||
+ cle = <&gpio2 0x2>;
|
||||
+ nce = <&gpio2 0x1>;
|
||||
+ rdy = <&gpio2 0x0>;
|
||||
+ reg = <0xf8000000 0x1000>;
|
||||
+ device_type = "rb,nand";
|
||||
+ };
|
||||
+
|
||||
+ nnand {
|
||||
+ reg = <0xf0000000 0x1000>;
|
||||
+ };
|
||||
+
|
||||
+ voltage {
|
||||
+ voltage_gpio = <&gpio3 0x11>;
|
||||
+ };
|
||||
+
|
||||
+ fancon {
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x14 0x8>;
|
||||
+ fan_on = <&gpio0 0x10>;
|
||||
+ };
|
||||
+
|
||||
+ pci0: pci@e0008500 {
|
||||
+ device_type = "pci";
|
||||
+ // compatible = "83xx";
|
||||
+ compatible = "fsl,mpc8349-pci";
|
||||
+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ #interrupt-cells = <1>;
|
||||
+ // clock-frequency = <0>;
|
||||
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
|
||||
+ bus-range = <0x0 0x0>;
|
||||
+ interrupt-map = <
|
||||
+ /* IDSEL 0x10 AD16 miniPCI slot 0 */
|
||||
+ 0x8000 0x0 0x0 0x1 &ipic 0x11 0x8
|
||||
+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
|
||||
+
|
||||
+ /* IDSEL 0x11 AD17 miniPCI slot 1 */
|
||||
+ 0x8800 0x0 0x0 0x1 &ipic 0x12 0x8
|
||||
+ 0x8800 0x0 0x0 0x2 &ipic 0x13 0x8
|
||||
+
|
||||
+ /* IDSEL 0x12 AD18 miniPCI slot 2 */
|
||||
+ 0x9000 0x0 0x0 0x1 &ipic 0x13 0x8
|
||||
+ 0x9000 0x0 0x0 0x2 &ipic 0x11 0x8>;
|
||||
+
|
||||
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ // interrupts = <66 0x8>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ qe@e0100000 {
|
||||
+ reg = <0xe0100000 0x480>;
|
||||
+ ranges = <0x0 0xe0100000 0x100000>;
|
||||
+ model = "QE";
|
||||
+ device_type = "qe";
|
||||
+ compatible = "fsl,qe";
|
||||
+ #size-cells = <1>;
|
||||
+ #address-cells = <1>;
|
||||
+ brg-frequency = <0>;
|
||||
+ bus-frequency = <0>;
|
||||
+ // bus-frequency = <198000000>;
|
||||
+ fsl,qe-num-riscs = <1>;
|
||||
+ fsl,qe-num-snums = <28>;
|
||||
+
|
||||
+ qeic: qeic@80 {
|
||||
+ interrupt-controller;
|
||||
+ compatible = "fsl,qe-ic";
|
||||
+ big-endian;
|
||||
+ built-in;
|
||||
+ reg = <0x80 0x80>;
|
||||
+ #interrupt-cells = <1>;
|
||||
+ #address-cells = <0>;
|
||||
+ device_type = "qeic";
|
||||
+ interrupts = <0x20 0x8 0x21 0x8>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ };
|
||||
+
|
||||
+ mdio@2120 {
|
||||
+ compatible = "ucc_geth_phy";
|
||||
+ device_type = "mdio";
|
||||
+ reg = <0x3120 0x18>;
|
||||
+ #size-cells = <0>;
|
||||
+ #address-cells = <1>;
|
||||
+
|
||||
+ phy3: ethernet-phy@03 {
|
||||
+ // interface = <0x3>;
|
||||
+ device_type = "ethernet-phy";
|
||||
+ reg = <0x3>;
|
||||
+ };
|
||||
+
|
||||
+ phy2: ethernet-phy@02 {
|
||||
+ // interface = <0x3>;
|
||||
+ device_type = "ethernet-phy";
|
||||
+ reg = <0x2>;
|
||||
+ };
|
||||
+
|
||||
+ phy1: ethernet-phy@01 {
|
||||
+ // interface = <0x3>;
|
||||
+ device_type = "ethernet-phy";
|
||||
+ reg = <0x1>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ enet0: ucc@2200 {
|
||||
+ tx-clock = <0x1a>;
|
||||
+ rx-clock = <0x1f>;
|
||||
+ mac-address = [00 0c 42 1c 29 d2];
|
||||
+ interrupt-parent = <&qeic>;
|
||||
+ interrupts = <0x22>;
|
||||
+ reg = <0x2200 0x200>;
|
||||
+ device-id = <0x3>;
|
||||
+ model = "UCC";
|
||||
+ compatible = "ucc_geth";
|
||||
+ device_type = "network";
|
||||
+ phy-handle = <&phy2>;
|
||||
+ pio-handle = <&pio3>;
|
||||
+ };
|
||||
+
|
||||
+ enet1: ucc@3200 {
|
||||
+ tx-clock = <0x22>;
|
||||
+ rx-clock = <0x20>;
|
||||
+ mac-address = [00 0c 42 1c 29 d1];
|
||||
+ interrupt-parent = <&qeic>;
|
||||
+ interrupts = <0x23>;
|
||||
+ reg = <0x3200 0x200>;
|
||||
+ device-id = <0x4>;
|
||||
+ model = "UCC";
|
||||
+ compatible = "ucc_geth";
|
||||
+ device_type = "network";
|
||||
+ phy-handle = <&phy3>;
|
||||
+ pio-handle = <&pio4>;
|
||||
+ };
|
||||
+
|
||||
+ enet2: ucc@3000 {
|
||||
+ tx-clock = <0x18>;
|
||||
+ rx-clock = <0x17>;
|
||||
+ mac-address = [00 0c 42 1c 29 d0];
|
||||
+ interrupt-parent = <&qeic>;
|
||||
+ interrupts = <0x21>;
|
||||
+ reg = <0x3000 0x200>;
|
||||
+ device-id = <0x2>;
|
||||
+ model = "UCC";
|
||||
+ compatible = "ucc_geth";
|
||||
+ device_type = "network";
|
||||
+ phy-handle = <&phy1>;
|
||||
+ pio-handle = <&pio2>;
|
||||
+ };
|
||||
+
|
||||
+ spi@500 {
|
||||
+ mode = "cpu";
|
||||
+ interrupt-parent = <&qeic>;
|
||||
+ interrupts = <0x1>;
|
||||
+ reg = <0x500 0x40>;
|
||||
+ compatible = "fsl,spi";
|
||||
+ device_type = "spi";
|
||||
+ };
|
||||
+
|
||||
+ spi@4c0 {
|
||||
+ mode = "cpu";
|
||||
+ interrupt-parent = <&qeic>;
|
||||
+ interrupts = <0x2>;
|
||||
+ reg = <0x4c0 0x40>;
|
||||
+ compatible = "fsl,spi";
|
||||
+ device_type = "spi";
|
||||
+ };
|
||||
+
|
||||
+ muram@10000 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
||||
+ ranges = <0x0 0x10000 0x4000>;
|
||||
+ device_type = "muram";
|
||||
+
|
||||
+ data-only@0 {
|
||||
+ compatible = "fsl,qe-muram-data",
|
||||
+ "fsl,cpm-muram-data";
|
||||
+ reg = <0x0 0x4000>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ soc8323@e0000000 {
|
||||
+ bus-frequency = <0x1>;
|
||||
+ reg = <0xe0000000 0x200>;
|
||||
+ ranges = <0x0 0xe0000000 0x100000>;
|
||||
+ device_type = "soc";
|
||||
+ compatible = "simple-bus";
|
||||
+ #interrupt-cells = <0x2>;
|
||||
+ #size-cells = <1>;
|
||||
+ #address-cells = <1>;
|
||||
+
|
||||
+ beeper {
|
||||
+ gpio = <&gpio3 0x12>;
|
||||
+ reg = <0x500 0x100>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x48 0x8>;
|
||||
+ };
|
||||
+
|
||||
+ gpio3: gpio@3 {
|
||||
+ reg = <0x144c 0x4>;
|
||||
+ device-id = <0x3>;
|
||||
+ compatible = "qe_gpio";
|
||||
+ device_type = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ gpio2: gpio@2 {
|
||||
+ reg = <0x1434 0x4>;
|
||||
+ device-id = <0x2>;
|
||||
+ compatible = "qe_gpio";
|
||||
+ device_type = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ gpio0: gpio@0 {
|
||||
+ reg = <0x1404 0x4>;
|
||||
+ device-id = <0x0>;
|
||||
+ compatible = "qe_gpio";
|
||||
+ device_type = "gpio";
|
||||
+ };
|
||||
+
|
||||
+ par_io@1400 {
|
||||
+ num-ports = <4>;
|
||||
+ device_type = "par_io";
|
||||
+ reg = <0x1400 0x100>;
|
||||
+
|
||||
+ pio4: ucc_pin@04 {
|
||||
+ pio-map = <
|
||||
+ /* port pin dir open_drain assignment has_irq */
|
||||
+ 1 18 1 0 1 0
|
||||
+ 1 19 1 0 1 0
|
||||
+ 1 20 1 0 1 0
|
||||
+ 1 21 1 0 1 0
|
||||
+ 1 30 1 0 1 0
|
||||
+ 3 20 2 0 1 0
|
||||
+ 1 30 2 0 1 0
|
||||
+ 1 31 2 0 1 0
|
||||
+ 1 22 2 0 1 0
|
||||
+ 1 23 2 0 1 0
|
||||
+ 1 24 2 0 1 0
|
||||
+ 1 25 2 0 1 0
|
||||
+ 1 28 2 0 1 0
|
||||
+ 1 26 2 0 1 0
|
||||
+ 3 21 2 0 1 0>;
|
||||
+ };
|
||||
+
|
||||
+ pio3: ucc_pin@03 {
|
||||
+ pio-map = <
|
||||
+ /* port pin dir open_drain assignment has_irq */
|
||||
+ 1 0 1 0 1 0
|
||||
+ 1 1 1 0 1 0
|
||||
+ 1 2 1 0 1 0
|
||||
+ 1 3 1 0 1 0
|
||||
+ 1 12 1 0 1 0
|
||||
+ 3 24 2 0 1 0
|
||||
+ 1 11 2 0 1 0
|
||||
+ 1 13 2 0 1 0
|
||||
+ 1 4 2 0 1 0
|
||||
+ 1 5 2 0 1 0
|
||||
+ 1 6 2 0 1 0
|
||||
+ 1 7 2 0 1 0
|
||||
+ 1 10 2 0 1 0
|
||||
+ 1 8 2 0 1 0
|
||||
+ 3 29 2 0 1 0>;
|
||||
+ };
|
||||
+
|
||||
+ pio2: ucc_pin@02 {
|
||||
+ pio-map = <
|
||||
+ /* port pin dir open_drain assignment has_irq */
|
||||
+ 3 4 3 0 2 0
|
||||
+ 3 5 1 0 2 0
|
||||
+ 0 18 1 0 1 0
|
||||
+ 0 19 1 0 1 0
|
||||
+ 0 20 1 0 1 0
|
||||
+ 0 21 1 0 1 0
|
||||
+ 0 30 1 0 1 0
|
||||
+ 3 6 2 0 1 0
|
||||
+ 0 29 2 0 1 0
|
||||
+ 0 31 2 0 1 0
|
||||
+ 0 22 2 0 1 0
|
||||
+ 0 23 2 0 1 0
|
||||
+ 0 24 2 0 1 0
|
||||
+ 0 25 2 0 1 0
|
||||
+ 0 28 2 0 1 0
|
||||
+ 0 26 2 0 1 0
|
||||
+ 3 31 2 0 1 0>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ ipic: pic@700 {
|
||||
+ device_type = "ipic";
|
||||
+ built-in;
|
||||
+ reg = <0x700 0x100>;
|
||||
+ #interrupt-cells = <0x2>;
|
||||
+ #address-cells = <0x0>;
|
||||
+ interrupt-controller;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ serial@4500 {
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <0x9 0x8>;
|
||||
+ clock-frequency = <0x7f27c20>;
|
||||
+ reg = <0x4500 0x100>;
|
||||
+ compatible = "ns16550";
|
||||
+ device_type = "serial";
|
||||
+ };
|
||||
+
|
||||
+ dma@82a8 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
|
||||
+ reg = <0x82a8 4>;
|
||||
+ ranges = <0 0x8100 0x1a8>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ cell-index = <0>;
|
||||
+ dma-channel@0 {
|
||||
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0 0x80>;
|
||||
+ cell-index = <0>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ dma-channel@80 {
|
||||
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0x80 0x80>;
|
||||
+ cell-index = <1>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ dma-channel@100 {
|
||||
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0x100 0x80>;
|
||||
+ cell-index = <2>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ dma-channel@180 {
|
||||
+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0x180 0x28>;
|
||||
+ cell-index = <3>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ wdt@200 {
|
||||
+ reg = <0x200 0x100>;
|
||||
+ compatible = "mpc83xx_wdt";
|
||||
+ device_type = "watchdog";
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
@ -1,76 +0,0 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/powerpc/boot/rb333.c
|
||||
@@ -0,0 +1,73 @@
|
||||
+/*
|
||||
+ * The RouterBOARD platform -- for booting RB333 RouterBOARDs.
|
||||
+ *
|
||||
+ * Author: Alexandros C. Couloumbis <alex@ozo.com>
|
||||
+ * Author: Michael Guntsche <mike@it-loops.com>
|
||||
+ *
|
||||
+ * Copyright (c) 2010 Alexandros C. Couloumbis
|
||||
+ * Copyright (c) 2009 Michael Guntsche
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License version 2 as published
|
||||
+ * by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include "ops.h"
|
||||
+#include "types.h"
|
||||
+#include "io.h"
|
||||
+#include "stdio.h"
|
||||
+#include <libfdt.h>
|
||||
+
|
||||
+BSS_STACK(4*1024);
|
||||
+
|
||||
+u64 memsize64;
|
||||
+const void *fw_dtb;
|
||||
+
|
||||
+static void rb333_fixups(void)
|
||||
+{
|
||||
+ const u32 *reg, *timebase, *clock;
|
||||
+ int node, size;
|
||||
+ void *chosen;
|
||||
+ const char* bootargs;
|
||||
+
|
||||
+ dt_fixup_memory(0, memsize64);
|
||||
+
|
||||
+ /* Find the CPU timebase and clock frequencies. */
|
||||
+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
|
||||
+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
|
||||
+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
|
||||
+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
|
||||
+
|
||||
+ /* Fixup chosen
|
||||
+ * The bootloader reads the kernelparm segment and adds the content to
|
||||
+ * bootargs. This is needed to specify root and other boot flags.
|
||||
+ */
|
||||
+ chosen = finddevice("/chosen");
|
||||
+ node = fdt_path_offset(fw_dtb, "/chosen");
|
||||
+ bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
|
||||
+ setprop_str(chosen, "bootargs", bootargs);
|
||||
+}
|
||||
+
|
||||
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||
+ unsigned long r6, unsigned long r7)
|
||||
+{
|
||||
+ const u32 *reg;
|
||||
+ int node, size;
|
||||
+
|
||||
+ fw_dtb = (const void *)r3;
|
||||
+
|
||||
+ /* Find the memory range. */
|
||||
+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
|
||||
+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
|
||||
+ memsize64 = reg[1];
|
||||
+
|
||||
+ /* Now we have the memory size; initialize the heap. */
|
||||
+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
|
||||
+
|
||||
+ /* Prepare the device tree and find the console. */
|
||||
+ fdt_init(_dtb_start);
|
||||
+ serial_console_init();
|
||||
+
|
||||
+ /* Remaining fixups... */
|
||||
+ platform_ops.fixups = rb333_fixups;
|
||||
+}
|
||||
@ -1,11 +0,0 @@
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -145,7 +145,7 @@ objflags=-S
|
||||
tmp=$tmpdir/zImage.$$.o
|
||||
ksection=.kernel:vmlinux.strip
|
||||
isection=.kernel:initrd
|
||||
-link_address='0x400000'
|
||||
+link_address='0x490000'
|
||||
|
||||
case "$platform" in
|
||||
pseries)
|
||||
@ -1,71 +0,0 @@
|
||||
|
||||
--- a/arch/powerpc/platforms/83xx/rbppc.c
|
||||
+++ b/arch/powerpc/platforms/83xx/rbppc.c
|
||||
@@ -121,21 +121,16 @@ static void __init rbppc_setup_arch(void
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_QUICC_ENGINE
|
||||
- np = of_find_node_by_name(np, "par_io");
|
||||
- if (np) {
|
||||
- qe_reset();
|
||||
- par_io_init(np);
|
||||
- of_node_put(np);
|
||||
-
|
||||
- np = NULL;
|
||||
- while (1) {
|
||||
- np = of_find_node_by_name(np, "ucc");
|
||||
- if (!np) break;
|
||||
+ qe_reset();
|
||||
|
||||
- par_io_of_config(np);
|
||||
- }
|
||||
- }
|
||||
-#endif
|
||||
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
|
||||
+ par_io_init(np);
|
||||
+ of_node_put(np);
|
||||
+
|
||||
+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
|
||||
+ par_io_of_config(np);
|
||||
+ }
|
||||
+#endif
|
||||
|
||||
}
|
||||
|
||||
@@ -151,12 +146,16 @@ void __init rbppc_init_IRQ(void)
|
||||
}
|
||||
|
||||
#ifdef CONFIG_QUICC_ENGINE
|
||||
- np = of_find_node_by_type(NULL, "qeic");
|
||||
- if (np) {
|
||||
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
|
||||
- of_node_put(np);
|
||||
- }
|
||||
-#endif
|
||||
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
|
||||
+ if (!np) {
|
||||
+ np = of_find_node_by_type(NULL, "qeic");
|
||||
+ if (!np)
|
||||
+ return;
|
||||
+ }
|
||||
+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
|
||||
+ of_node_put(np);
|
||||
+#endif /* CONFIG_QUICC_ENGINE */
|
||||
+
|
||||
}
|
||||
|
||||
static int __init rbppc_probe(void)
|
||||
@@ -284,6 +283,8 @@ static struct of_device_id rbppc_ids[] =
|
||||
{ .type = "soc", },
|
||||
{ .compatible = "soc", },
|
||||
{ .compatible = "simple-bus", },
|
||||
+ { .type = "qe", },
|
||||
+ { .compatible = "fsl,qe", },
|
||||
{ .compatible = "gianfar", },
|
||||
{ },
|
||||
};
|
||||
@@ -372,4 +373,3 @@ static void fixup_rb604(struct pci_dev *
|
||||
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
|
||||
DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)
|
||||
-
|
||||
@ -1,136 +0,0 @@
|
||||
--- a/arch/powerpc/boot/dts/rb600.dts
|
||||
+++ b/arch/powerpc/boot/dts/rb600.dts
|
||||
@@ -20,9 +20,11 @@
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
+ pci0 = &pci0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
|
||||
linux,stdout-path = "/soc8343@e0000000/serial@4500";
|
||||
};
|
||||
|
||||
@@ -150,6 +152,45 @@
|
||||
device_type = "gpio";
|
||||
};
|
||||
|
||||
+ dma@82a8 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
|
||||
+ reg = <0x82a8 4>;
|
||||
+ ranges = <0 0x8100 0x1a8>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ cell-index = <0>;
|
||||
+ dma-channel@0 {
|
||||
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0 0x80>;
|
||||
+ cell-index = <0>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ dma-channel@80 {
|
||||
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0x80 0x80>;
|
||||
+ cell-index = <1>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ dma-channel@100 {
|
||||
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0x100 0x80>;
|
||||
+ cell-index = <2>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ dma-channel@180 {
|
||||
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
|
||||
+ reg = <0x180 0x28>;
|
||||
+ cell-index = <3>;
|
||||
+ interrupt-parent = <&ipic>;
|
||||
+ interrupts = <71 8>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
enet0: ethernet@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
--- a/arch/powerpc/boot/rb600.c
|
||||
+++ b/arch/powerpc/boot/rb600.c
|
||||
@@ -45,14 +45,6 @@ static void rb600_fixups(void)
|
||||
clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
|
||||
dt_fixup_cpu_clocks(*clock, *timebase, 0);
|
||||
|
||||
- /* Fixup chosen
|
||||
- * The bootloader reads the kernelparm segment and adds the content to
|
||||
- * bootargs. This is needed to specify root and other boot flags.
|
||||
- */
|
||||
- chosen = finddevice("/chosen");
|
||||
- node = fdt_path_offset(fw_dtb, "/chosen");
|
||||
- bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
|
||||
- setprop_str(chosen, "bootargs", bootargs);
|
||||
}
|
||||
|
||||
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
|
||||
--- a/arch/powerpc/platforms/83xx/rbppc.c
|
||||
+++ b/arch/powerpc/platforms/83xx/rbppc.c
|
||||
@@ -56,6 +56,8 @@ static void *gtm;
|
||||
static int beeper_irq;
|
||||
static unsigned beeper_gpio_pin[2];
|
||||
|
||||
+int rb333model = 0;
|
||||
+
|
||||
irqreturn_t rbppc_timer_irq(int irq, void *ptr)
|
||||
{
|
||||
static int toggle = 0;
|
||||
@@ -120,6 +122,8 @@ static void __init rbppc_setup_arch(void
|
||||
}
|
||||
#endif
|
||||
|
||||
+if (rb333model) {
|
||||
+
|
||||
#ifdef CONFIG_QUICC_ENGINE
|
||||
qe_reset();
|
||||
|
||||
@@ -132,6 +136,8 @@ static void __init rbppc_setup_arch(void
|
||||
}
|
||||
#endif
|
||||
|
||||
+} /* RB333 */
|
||||
+
|
||||
}
|
||||
|
||||
void __init rbppc_init_IRQ(void)
|
||||
@@ -145,6 +151,8 @@ void __init rbppc_init_IRQ(void)
|
||||
of_node_put(np);
|
||||
}
|
||||
|
||||
+if (rb333model) {
|
||||
+
|
||||
#ifdef CONFIG_QUICC_ENGINE
|
||||
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
|
||||
if (!np) {
|
||||
@@ -156,6 +164,8 @@ void __init rbppc_init_IRQ(void)
|
||||
of_node_put(np);
|
||||
#endif /* CONFIG_QUICC_ENGINE */
|
||||
|
||||
+} /* RB333 */
|
||||
+
|
||||
}
|
||||
|
||||
static int __init rbppc_probe(void)
|
||||
@@ -167,8 +177,10 @@ static int __init rbppc_probe(void)
|
||||
if (!model)
|
||||
return 0;
|
||||
|
||||
- if (strcmp(model, "RB333") == 0)
|
||||
+ if (strcmp(model, "RB333") == 0) {
|
||||
+ rb333model = 1;
|
||||
return 1;
|
||||
+ }
|
||||
|
||||
if (strcmp(model, "RB600") == 0)
|
||||
return 1;
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,37 +0,0 @@
|
||||
--- a/drivers/ata/pata_rbppc_cf.c
|
||||
+++ b/drivers/ata/pata_rbppc_cf.c
|
||||
@@ -15,6 +15,7 @@
|
||||
#include <linux/libata.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/ata_platform.h>
|
||||
+#include <linux/slab.h>
|
||||
|
||||
#define DEBUG_UPM 0
|
||||
|
||||
@@ -510,7 +511,7 @@ static struct ata_port_operations rbppc_
|
||||
.sff_irq_clear = rbppc_cf_dummy_noret,
|
||||
};
|
||||
|
||||
-static int rbppc_cf_init_info(struct of_device *pdev, struct rbppc_cf_info *info) {
|
||||
+static int rbppc_cf_init_info(struct platform_device *pdev, struct rbppc_cf_info *info) {
|
||||
struct device_node *np;
|
||||
struct resource res;
|
||||
const u32 *u32ptr;
|
||||
@@ -579,7 +580,7 @@ static int rbppc_cf_init_info(struct of_
|
||||
return 0;
|
||||
}
|
||||
|
||||
-static int rbppc_cf_probe(struct of_device *pdev,
|
||||
+static int rbppc_cf_probe(struct platform_device *pdev,
|
||||
const struct of_device_id *match)
|
||||
{
|
||||
struct ata_host *host;
|
||||
@@ -654,7 +655,7 @@ err_info:
|
||||
return err;
|
||||
}
|
||||
|
||||
-static int rbppc_cf_remove(struct of_device *pdev)
|
||||
+static int rbppc_cf_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct ata_host *host = dev_get_drvdata(dev);
|
||||
@ -1,22 +0,0 @@
|
||||
--- a/drivers/mtd/nand/rbppc_nand.c
|
||||
+++ b/drivers/mtd/nand/rbppc_nand.c
|
||||
@@ -14,8 +14,8 @@
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/of_platform.h>
|
||||
-#include <asm/of_platform.h>
|
||||
-#include <asm/of_device.h>
|
||||
+#include <linux/of_device.h>
|
||||
+#include <linux/slab.h>
|
||||
#include <linux/delay.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
@@ -116,7 +116,7 @@ static void rbppc_nand_read_buf(struct m
|
||||
|
||||
static unsigned init_ok = 0;
|
||||
|
||||
-static int rbppc_nand_probe(struct of_device *pdev,
|
||||
+static int rbppc_nand_probe(struct platform_device *pdev,
|
||||
const struct of_device_id *match)
|
||||
{
|
||||
struct device_node *gpio;
|
||||
@ -1,40 +0,0 @@
|
||||
--- a/drivers/mtd/nand/rbppc_nand.c
|
||||
+++ b/drivers/mtd/nand/rbppc_nand.c
|
||||
@@ -130,10 +130,10 @@ static int rbppc_nand_probe(struct platf
|
||||
|
||||
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
||||
|
||||
- rdy = of_get_property(pdev->node, "rdy", NULL);
|
||||
- nce = of_get_property(pdev->node, "nce", NULL);
|
||||
- cle = of_get_property(pdev->node, "cle", NULL);
|
||||
- ale = of_get_property(pdev->node, "ale", NULL);
|
||||
+ rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
|
||||
+ nce = of_get_property(pdev->dev.of_node, "nce", NULL);
|
||||
+ cle = of_get_property(pdev->dev.of_node, "cle", NULL);
|
||||
+ ale = of_get_property(pdev->dev.of_node, "ale", NULL);
|
||||
|
||||
if (!rdy || !nce || !cle || !ale) {
|
||||
printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
|
||||
@@ -180,7 +180,7 @@ static int rbppc_nand_probe(struct platf
|
||||
of_node_put(nnand);
|
||||
info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
|
||||
|
||||
- if (of_address_to_resource(pdev->node, 0, &res)) {
|
||||
+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
|
||||
printk("rbppc_nand_probe: No reg property found\n");
|
||||
goto err;
|
||||
}
|
||||
@@ -222,12 +222,11 @@ static struct of_device_id rbppc_nand_id
|
||||
};
|
||||
|
||||
static struct of_platform_driver rbppc_nand_driver = {
|
||||
- .name = "nand",
|
||||
.probe = rbppc_nand_probe,
|
||||
- .match_table = rbppc_nand_ids,
|
||||
.driver = {
|
||||
.name = "rbppc-nand",
|
||||
.owner = THIS_MODULE,
|
||||
+ .of_match_table = rbppc_nand_ids,
|
||||
},
|
||||
};
|
||||
|
||||
@ -1,60 +0,0 @@
|
||||
--- a/drivers/ata/pata_rbppc_cf.c
|
||||
+++ b/drivers/ata/pata_rbppc_cf.c
|
||||
@@ -522,7 +522,7 @@ static int rbppc_cf_init_info(struct pla
|
||||
unsigned ccb_freq_hz;
|
||||
unsigned lb_div;
|
||||
|
||||
- u32ptr = of_get_property(pdev->node, "lbc_extra_divider", NULL);
|
||||
+ u32ptr = of_get_property(pdev->dev.of_node, "lbc_extra_divider", NULL);
|
||||
if (u32ptr && *u32ptr) {
|
||||
lbc_extra_divider = *u32ptr;
|
||||
#if DEBUG_UPM
|
||||
@@ -568,7 +568,7 @@ static int rbppc_cf_init_info(struct pla
|
||||
printk(KERN_INFO "rbppc_cf_init_info: Using Local-Bus clock %u kHz %u ps\n",
|
||||
lbc_clk_khz, info->clk_time_ps);
|
||||
|
||||
- u32ptr = of_get_property(pdev->node, "lb-timings", NULL);
|
||||
+ u32ptr = of_get_property(pdev->dev.of_node, "lb-timings", NULL);
|
||||
if (u32ptr) {
|
||||
memcpy(info->lb_timings, u32ptr, LBT_SIZE * sizeof(*u32ptr));
|
||||
#if DEBUG_UPM
|
||||
@@ -608,13 +608,13 @@ static int rbppc_cf_probe(struct platfor
|
||||
rbinfo = info;
|
||||
}
|
||||
|
||||
- u32ptr = of_get_property(pdev->node, "interrupt-at-level", NULL);
|
||||
+ u32ptr = of_get_property(pdev->dev.of_node, "interrupt-at-level", NULL);
|
||||
if (u32ptr) {
|
||||
irq_level = *u32ptr;
|
||||
printk(KERN_INFO "rbppc_cf_probe: IRQ level %u\n", irq_level);
|
||||
}
|
||||
|
||||
- if (of_address_to_resource(pdev->node, 0, &res)) {
|
||||
+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
|
||||
printk(KERN_ERR "rbppc_cf_probe: No reg property found\n");
|
||||
goto err_info;
|
||||
}
|
||||
@@ -641,7 +641,7 @@ static int rbppc_cf_probe(struct platfor
|
||||
|
||||
err = ata_host_activate(
|
||||
host,
|
||||
- irq_of_parse_and_map(pdev->node, 0), ata_sff_interrupt,
|
||||
+ irq_of_parse_and_map(pdev->dev.of_node, 0), ata_sff_interrupt,
|
||||
irq_level ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW,
|
||||
&rbppc_cf_sht);
|
||||
if (!err) return 0;
|
||||
@@ -672,13 +672,12 @@ static struct of_device_id rbppc_cf_ids[
|
||||
};
|
||||
|
||||
static struct of_platform_driver rbppc_cf_driver = {
|
||||
- .name = "cf",
|
||||
.probe = rbppc_cf_probe,
|
||||
.remove = rbppc_cf_remove,
|
||||
- .match_table = rbppc_cf_ids,
|
||||
.driver = {
|
||||
.name = "rbppc-cf",
|
||||
.owner = THIS_MODULE,
|
||||
+ .of_match_table = rbppc_cf_ids,
|
||||
},
|
||||
};
|
||||
|
||||
@ -1,116 +0,0 @@
|
||||
--- a/drivers/net/phy/Kconfig
|
||||
+++ b/drivers/net/phy/Kconfig
|
||||
@@ -51,6 +51,12 @@ config VITESSE_PHY
|
||||
---help---
|
||||
Currently supports the vsc8244
|
||||
|
||||
+config VITESSE_PHY_8601_SKEW
|
||||
+ bool "Enable skew timing to vsc8601"
|
||||
+ depends on VITESSE_PHY
|
||||
+ ---help---
|
||||
+ Apply clock timing adjustments for vsc8601
|
||||
+
|
||||
config SMSC_PHY
|
||||
tristate "Drivers for SMSC PHYs"
|
||||
---help---
|
||||
--- a/drivers/net/phy/vitesse.c
|
||||
+++ b/drivers/net/phy/vitesse.c
|
||||
@@ -26,6 +26,11 @@
|
||||
#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
|
||||
#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
|
||||
|
||||
+/* EXT_CON1 Register values for VSC8601 */
|
||||
+#define MII_VSC8601_EXTCON1_INIT 0x0000
|
||||
+#define MII_VSC8601_EXTCON1_SKEW 0x0100
|
||||
+#define MII_VSC8601_EXTCON1_ACTIPHY 0x0020
|
||||
+
|
||||
/* Vitesse Interrupt Mask Register */
|
||||
#define MII_VSC8244_IMASK 0x19
|
||||
#define MII_VSC8244_IMASK_IEN 0x8000
|
||||
@@ -88,6 +93,30 @@ static int vsc824x_config_init(struct ph
|
||||
return err;
|
||||
}
|
||||
|
||||
+static int vsc8601_config_init(struct phy_device *phydev)
|
||||
+{
|
||||
+ int err;
|
||||
+ int extcon;
|
||||
+
|
||||
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
|
||||
+ MII_VSC8244_AUXCONSTAT_INIT);
|
||||
+
|
||||
+ if (err < 0)
|
||||
+ return err;
|
||||
+
|
||||
+#ifdef CONFIG_VITESSE_PHY_8601_SKEW
|
||||
+ extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
|
||||
+ if (err < 0)
|
||||
+ return err;
|
||||
+
|
||||
+ extcon |= MII_VSC8601_EXTCON1_SKEW;
|
||||
+
|
||||
+ err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
|
||||
+#endif
|
||||
+
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
static int vsc824x_ack_interrupt(struct phy_device *phydev)
|
||||
{
|
||||
int err = 0;
|
||||
@@ -143,6 +172,21 @@ static struct phy_driver vsc8244_driver
|
||||
.driver = { .owner = THIS_MODULE,},
|
||||
};
|
||||
|
||||
+/* Vitesse 8601 */
|
||||
+static struct phy_driver vsc8601_driver = {
|
||||
+ .phy_id = 0x00070420,
|
||||
+ .name = "Vitesse VSC8601",
|
||||
+ .phy_id_mask = 0x000ffff8,
|
||||
+ .features = PHY_GBIT_FEATURES,
|
||||
+ .flags = PHY_HAS_INTERRUPT,
|
||||
+ .config_init = &vsc8601_config_init,
|
||||
+ .config_aneg = &genphy_config_aneg,
|
||||
+ .read_status = &genphy_read_status,
|
||||
+ .ack_interrupt = &vsc824x_ack_interrupt,
|
||||
+ .config_intr = &vsc82xx_config_intr,
|
||||
+ .driver = { .owner = THIS_MODULE,},
|
||||
+};
|
||||
+
|
||||
static int vsc8221_config_init(struct phy_device *phydev)
|
||||
{
|
||||
int err;
|
||||
@@ -176,10 +220,23 @@ static int __init vsc82xx_init(void)
|
||||
|
||||
err = phy_driver_register(&vsc8244_driver);
|
||||
if (err < 0)
|
||||
- return err;
|
||||
+ goto err;
|
||||
+
|
||||
err = phy_driver_register(&vsc8221_driver);
|
||||
if (err < 0)
|
||||
- phy_driver_unregister(&vsc8244_driver);
|
||||
+ goto err1;
|
||||
+
|
||||
+ err = phy_driver_register(&vsc8601_driver);
|
||||
+ if (err < 0)
|
||||
+ goto err2;
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err2:
|
||||
+ phy_driver_unregister(&vsc8221_driver);
|
||||
+err1:
|
||||
+ phy_driver_unregister(&vsc8244_driver);
|
||||
+err:
|
||||
return err;
|
||||
}
|
||||
|
||||
@@ -187,6 +244,7 @@ static void __exit vsc82xx_exit(void)
|
||||
{
|
||||
phy_driver_unregister(&vsc8244_driver);
|
||||
phy_driver_unregister(&vsc8221_driver);
|
||||
+ phy_driver_unregister(&vsc8601_driver);
|
||||
}
|
||||
|
||||
module_init(vsc82xx_init);
|
||||
@ -1,17 +0,0 @@
|
||||
--- a/drivers/net/gianfar.c
|
||||
+++ b/drivers/net/gianfar.c
|
||||
@@ -1002,6 +1002,14 @@ static int gfar_probe(struct platform_de
|
||||
udelay(2);
|
||||
|
||||
tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
|
||||
+ /*
|
||||
+ * Do not enable flow control on chips earlier than rev 1.1,
|
||||
+ * because of the eTSEC27 erratum
|
||||
+ */
|
||||
+ tempval = 0;
|
||||
+ if (mfspr(SPRN_SVR) & 0xffff >= 0x0011)
|
||||
+ tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
|
||||
+
|
||||
gfar_write(®s->maccfg1, tempval);
|
||||
|
||||
/* Initialize MACCFG2. */
|
||||
Loading…
Reference in New Issue