ipq40xx: consolidate DTS files

The DTS files in files-4.19 and files-5.4 are exactly identical
except for one file (qcom-ipq4018-emr3500.dts), which is only
present for 5.4.

Since there is no point in maintaining all these identical files
twice, this patch moves them to the "files" directory.

If there ever was a new kernel with substantial DTS changes, a
new folder would need to be introduced anyway and could easily be
done.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
master
Adrian Schmutzler 4 years ago
parent 7e67d14486
commit fa6d53261a

@ -1,219 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "OpenMesh A42";
compatible = "openmesh,a42";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
red {
label = "a42:red:status";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power: green {
label = "a42:green:status";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
blue {
label = "a42:blue:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
/* hw_margin_ms is actually 300s but driver limits it to 60s */
hw_margin_ms = <60000>;
always-running;
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
/* partitions are passed via bootloader */
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A42";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A42";
};

@ -1,348 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ALFA Network AP120C-AC";
compatible = "alfa-network,ap120c-ac";
aliases {
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
status: status {
label = "ap120c-ac:blue:status";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wan {
label = "ap120c-ac:amber:wan";
gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "ap120c-ac:green:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "ap120c-ac:red:wlan5g";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
phys = <&usb3_hs_phy>;
phy-names = "usb2-phy";
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
qca8075: ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
#gpio-cells = <2>;
gpio-controller;
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_i2c3 {
status = "okay";
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
tpm@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
};
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 4 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0x000e0000 0x00010000>;
};
partition@f0000 {
label = "APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition@180000 {
label = "priv_data1";
reg = <0x00180000 0x00010000>;
read-only;
};
partition@190000 {
label = "priv_data2";
reg = <0x00190000 0x00010000>;
read-only;
};
};
};
nand@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs1";
reg = <0x00000000 0x04000000>;
};
partition@4000000 {
label = "rootfs2";
reg = <0x04000000 0x04000000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial0_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,forced_duplex = <1>;
qcom,forced_speed = <1000>;
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
vlan_tag = <1 0x10>;
};
&gmac1 {
qcom,forced_duplex = <1>;
qcom,forced_speed = <1000>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
vlan_tag = <2 0x20>;
};
&tlmm {
i2c0_pins: i2c0_pinmux {
mux_i2c {
function = "blsp_i2c0";
pins = "gpio58", "gpio59";
drive-strength = <16>;
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_mdio {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_mdc {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
serial0_pins: serial0_pinmux {
mux_uart {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi0_pins: spi0_pinmux {
mux_spi {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio4";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
};

@ -1,242 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "EZVIZ CS-W3-WD1200G EUP";
compatible = "ezviz,cs-w3-wd1200g-eup";
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_green;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
reset-delay-us = <5000>;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
leds {
compatible = "gpio-leds";
led_status_red: status_red {
label = "cs-w3-wd1200g-eup:red:status";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
led_status_green: status_green {
label = "cs-w3-wd1200g-eup:green:status";
gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};
led_status_blue: status_blue {
label = "cs-w3-wd1200g-eup:blue:status";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@E0000 {
label = "APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@F0000 {
label = "APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition9@580000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00180000 0x00e80000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
};

@ -1,241 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "D-Link DAP 2610";
compatible = "dlink,dap-2610";
aliases {
led-boot = &led_red;
led-failsafe = &led_red;
led-running = &led_green;
led-upgrade = &led_red;
};
soc {
edma@c080000 {
qcom,num_gmac = <1>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
rng@22000 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x20>;
switch_wan_bmp = <0x00>;
};
ess-psgmii@98000 {
status = "okay";
};
};
leds {
compatible = "gpio-leds";
led_red: red {
label = "dap-2610:red:power";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
};
led_green: green {
label = "dap-2610:green:power";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fixed-partitions";
partition@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
compatible = "wrg";
label = "firmware";
reg = <0x180000 0xdc0000>;
};
partition@fb0000 {
label = "rgbd";
reg = <0xfb0000 0x10000>;
read-only;
};
partition@fc0000 {
label = "bdcfg";
reg = <0xfc0000 0x10000>;
read-only;
};
partition@fd0000 {
label = "langpack";
reg = <0xfd0000 0x20000>;
read-only;
};
partition@ff0000 {
label = "certificate";
reg = <0xff0000 0x10000>;
read-only;
};
partition@f40000 {
label = "captival";
reg = <0xf40000 0x70000>;
read-only;
};
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x20>;
};
&mdio {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "dlink,dap-2610";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "dlink,dap-2610";
};

@ -1,277 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Linksys EA6350v3";
compatible = "linksys,ea6350v3";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
power: status {
label = "EA6350v3:green:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
&blsp_dma {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
MBIB@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
QSEE@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
CDT@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
APPSBLENV@d0000 {
label = "APPSBLENV";
reg = <0x000d0000 0x00010000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL"; /* uboot */
reg = <0x000e0000 0x00080000>;
read-only;
};
ART@160000 {
label = "ART";
reg = <0x00160000 0x00010000>;
read-only;
};
u_env@170000 {
label = "u_env";
reg = <0x00170000 0x00020000>;
};
s_env@190000 {
label = "s_env";
reg = <0x00190000 0x00020000>;
};
devinfo@1b0000 {
label = "devinfo";
reg = <0x001b0000 0x00010000>;
};
/* 0x001c0000 - 0x00200000 unused */
};
};
flash@1 {
status = "okay";
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
kernel@0 {
label = "kernel";
reg = <0x00000000 0x02800000>;
};
rootfs@300000 {
label = "rootfs";
reg = <0x00300000 0x02500000>;
};
alt_kernel@2800000 {
label = "alt_kernel";
reg = <0x02800000 0x02800000>;
};
alt_rootfs@2b00000 {
label = "alt_rootfs";
reg = <0x02b00000 0x02500000>;
};
sysdiag@5000000 {
label = "sysdiag";
reg = <0x05000000 0x00100000>;
};
syscfg@5100000 {
label = "syscfg";
reg = <0x05100000 0x02F00000>;
};
/* 0x00000000 - 0x08000000: 128 MiB */
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

@ -1,235 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "EnGenius EAP1300";
compatible = "engenius,eap1300";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
power: orange {
label = "eap1300:orange:power";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
lan {
label = "eap1300:blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
mesh {
label = "eap1300:blue:mesh";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "eap1300:blue:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "eap1300:yellow:wlan5g";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio54", "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00090000>;
read-only;
};
partition7@180000 {
label = "0:ART";
reg = <0x00180000 0x00010000>;
read-only;
};
partition8@190000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x190000 0x1dc0000>;
};
partition9@1f50000 {
label = "u-boot-env";
reg = <0x01f50000 0x00010000>;
};
partition10@1f60000 {
label = "userconfig";
reg = <0x01f60000 0x000a0000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
vlan_tag = <2 0x20>;
};
&gmac1 {
vlan_tag = <1 0x10>;
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
};

@ -1,233 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "EnGenius EMD1";
compatible = "engenius,emd1";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x20>;
switch_wan_bmp = <0x00>;
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <1>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "emd1:white:power";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "emd1:red:wlan2g";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "emd1:blue:wlan5g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
mesh {
label = "emd1:orange:mesh";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio54", "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
label = "userconfig";
reg = <0x00180000 0x00080000>;
read-only;
};
partition9@200000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x200000 0x01e00000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x20>;
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-EMD1";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-EMD1";
};

@ -1,265 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "EnGenius ENS620EXT";
compatible = "engenius,ens620ext";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
/*
* Disable the broken restart as a workaround for the buggy
* 3.0.0/3.0.1 U-boots that ship with the device.
* Note: The watchdog is now used to restart this device.
*/
restart@4ab000 {
status = "disabled";
};
};
buttons {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
power: power {
label = "ens620ext:amber:power";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "ens620ext:green:lan1";
gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "ens620ext:green:lan2";
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
wlan2G {
label = "ens620ext:green:wlan2G";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan5G {
label = "ens620ext:green:wlan5G";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00090000>;
read-only;
};
partition@180000 {
label = "ART";
reg = <0x00180000 0x00010000>;
read-only;
};
partition@190000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00190000 0x14d0000>;
};
partition@1660000 {
label = "failsafe";
reg = <0x01660000 0x008F0000>;
read-only;
};
partition@1f50000 {
label = "u-boot-env";
reg = <0x01f50000 0x00010000>;
read-only;
};
partition@1f60000 {
label = "userconfig";
reg = <0x01f60000 0x000a0000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
};

@ -1,33 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4018-ex61x0v2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX6100v2";
compatible = "netgear,ex6100v2";
};
&wifi0 {
qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
};
&wifi1 {
qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
};

@ -1,33 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4018-ex61x0v2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX6150v2";
compatible = "netgear,ex6150v2";
};
&wifi0 {
qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
};
&wifi1 {
qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
};

@ -1,312 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Netgear EX61X0v2";
compatible = "netgear,ex61x0v2";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <1>;
};
};
aliases {
led-boot = &power_amber;
led-failsafe = &power_amber;
led-running = &power_green;
led-upgrade = &power_amber;
label-mac-device = &gmac0;
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <1000000>;
};
};
leds {
compatible = "gpio-leds";
power_amber: power_amber {
label = "ex61x0v2:amber:power";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "ex61x0v2:green:power";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
right {
label = "ex61x0v2:blue:right";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
left {
label = "ex61x0v2:blue:left";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
client_green {
label = "ex61x0v2:green:client";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
client_red {
label = "ex61x0v2:red:client";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
router_green {
label = "ex61x0v2:green:router";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
router_red {
label = "ex61x0v2:red:router";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
wps {
label = "ex61x0v2:green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l12805d@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@E0000 {
label = "APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@F0000 {
label = "APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
label = "config";
reg = <0x00180000 0x00010000>;
read-only;
};
partition9@190000 {
label = "pot";
reg = <0x00190000 0x00010000>;
read-only;
};
partition10@1a0000 {
label = "dnidata";
reg = <0x001a0000 0x00010000>;
read-only;
};
partition11@1b0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x001b0000 0x00e10000>;
};
partition12@fc0000 {
label = "language";
reg = <0x00fc0000 0x00040000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};

@ -1,292 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Box 4040";
compatible = "avm,fritzbox-4040";
aliases {
led-boot = &power;
led-failsafe = &flash;
led-running = &power;
led-upgrade = &flash;
label-mac-device = &gmac0;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
qca8075: ess-switch@c000000 {
status = "okay";
#gpio-cells = <2>;
gpio-controller;
enable-usb-power {
gpio-hog;
line-name = "enable USB3 power";
gpios = <7 GPIO_ACTIVE_HIGH>;
output-high;
};
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
wlan {
label = "wlan";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
switch-leds {
compatible = "gpio-leds";
wlan {
label = "fritz4040:green:wlan";
gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
};
panic: info_red {
label = "fritz4040:red:info";
gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
wan {
label = "fritz4040:green:wan";
gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "fritz4040:green:power";
gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
};
lan {
label = "fritz4040:green:lan";
gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
};
flash: info_amber {
label = "fritz4040:amber:info";
gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
status = "okay";
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBLENV"; /* uboot env - empty */
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "urlader"; /* APPSBL */
reg = <0x000f0000 0x0002dc000>;
read-only;
};
partition7@11dc00 {
/* make a backup of this partition! */
label = "urlader_config";
reg = <0x0011dc00 0x00002400>;
read-only;
};
partition8@120000 {
label = "tffs1";
reg = <0x00120000 0x00080000>;
read-only;
};
partition9@1a0000 {
label = "tffs2";
reg = <0x001a0000 0x00080000>;
read-only;
};
partition10@220000 {
label = "uboot";
reg = <0x00220000 0x00080000>;
read-only;
};
partition11@2A0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x002a0000 0x01c60000>;
};
partition12@1f00000 {
label = "jffs2";
reg = <0x01f00000 0x00100000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
};

@ -1,9 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
#include "qcom-ipq4018-jalapeno.dtsi"
/ {
model = "8devices Jalapeno";
compatible = "8dev,jalapeno";
};

@ -1,269 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
status = "okay";
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>; /* lan port bitmap */
};
edma@c080000 {
status = "okay";
};
};
};
&tlmm {
mdio_pins: mdio_pinmux {
pinmux_1 {
pins = "gpio53";
function = "mdio";
};
pinmux_2 {
pins = "gpio52";
function = "mdc";
};
pinconf {
pins = "gpio52", "gpio53";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
status = "okay";
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
};
};
spi-nand@1 {
status = "okay";
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x00000000 0x08000000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,poll_required = <1>;
qcom,poll_required_dynamic = <1>;
qcom,phy_mdio_addr = <3>;
vlan_tag = <1 0x10>;
};
&gmac1 {
qcom,poll_required = <1>;
qcom,poll_required_dynamic = <1>;
qcom,phy_mdio_addr = <4>;
vlan_tag = <2 0x20>;
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

@ -1,81 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o.
* Author: Robert Marko <robert@meshpoint.me>
*/
#include "qcom-ipq4018-jalapeno.dtsi"
/ {
model = "Crisis Innovation Lab MeshPoint.One";
compatible = "cilab,meshpoint-one";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
soc {
i2c-gpio {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
&tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
>;
bme280@76 {
status = "okay";
compatible = "bosch,bme280";
reg = <0x76>;
};
pcf2129@51 {
status = "okay";
compatible = "nxp,pcf2129";
reg = <0x51>;
};
ina230@40 {
status = "okay";
compatible = "ti,ina230";
reg = <0x40>;
shunt-resistor = <2000>;
};
ina230@44 {
status = "okay";
compatible = "ti,ina230";
reg = <0x44>;
shunt-resistor = <2000>;
};
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART >;
};
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "meshpoint-one:blue:status";
gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
};
};
};

@ -1,337 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ZyXEL NBG6617";
compatible = "zyxel,nbg6617";
chosen {
/*
* the vendor u-boot adds root and mtdparts cmdline parameters
* which we don't want... but we have to overwrite them or else
* the kernel will take them at face value.
*/
bootargs-append = " mtdparts= root=31:13";
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
wlan {
label = "wlan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
power: power {
label = "nbg6617:green:power";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
usb {
label = "nbg6617:green:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
linux,default-trigger = "usbport";
};
wlan2G {
label = "nbg6617:green:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
wlan5G {
label = "nbg6617:green:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
wps {
label = "nbg6617:green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-low;
};
};
led_pins: led_pinmux {
mux {
pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
drive-strength = <0x8>;
bias-disable;
output-low;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l25635f@0 {
compatible = "mx25l25635f", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
status = "okay";
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBL"; /* u-boot */
reg = <0x000e0000 0x00080000>;
/* U-Boot Standalone App "zloader" is located at 0x64000 */
read-only;
};
partition6@160000 {
label = "APPSBLENV"; /* u-boot env */
reg = <0x00160000 0x00010000>;
};
partition7@170000 {
/* make a backup of this partition! */
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
label = "kernel";
reg = <0x00180000 0x00400000>;
};
partition9@580000 {
label = "dualflag";
reg = <0x00580000 0x00010000>;
read-only;
};
partition10@590000 {
label = "header";
reg = <0x00590000 0x00010000>;
};
partition11@5a0000 {
label = "romd";
reg = <0x005a0000 0x00100000>;
read-only;
};
partition12@6a0000 {
label = "not_root_data";
/*
* for some strange reason, someone at ZyXEL
* had the "great" idea to put the rootfs_data
* in front of rootfs... Don't do that!
* As a result this one, full MebiByte remains
* unused.
*/
reg = <0x006a0000 0x00100000>;
};
partition13@7a0000 {
label = "rootfs";
reg = <0x007a0000 0x01860000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

@ -1,309 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS RT-AC58U";
compatible = "asus,rt-ac58u";
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>;
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs-append = " ubi.mtd=UBI_DEV";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: status {
label = "rt-ac58u:blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wan {
label = "rt-ac58u:blue:wan";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan2G {
label = "rt-ac58u:blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5G {
label = "rt-ac58u:blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
usb {
label = "rt-ac58u:blue:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&usb3_port1>, <&usb3_port2>;
linux,default-trigger = "usbport";
};
lan {
label = "rt-ac58u:blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
/*
* U-boot looks for "n25q128a11" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
/* 0x00180000 - 0x00200000 unused */
};
};
spi-nand@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <30000000>;
/*
* U-boot looks for "spinand,mt29f" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
/*
* TODO: change to label = "ubi" once we drop 4.14.
* also drop the bootargs-append and all the
* userspace CI_UBIPART="UBI_DEV" remains.
*/
label = "UBI_DEV";
reg = <0x00000000 0x08000000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};

@ -1,265 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ZyXEL WRE6606";
compatible = "zyxel,wre6606";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs-append = " mtdparts=";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <1>;
};
};
leds {
compatible = "gpio-leds";
wps {
label = "wre6606:green:wps";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan5g_green {
label = "wre6606:green:wlan5g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
power: power {
label = "wre6606:green:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
wlan5g_red {
label = "wre6606:red:wlan5g";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
wlan2g_red {
label = "wre6606:red:wlan2g";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
wlan2g_green {
label = "wre6606:green:wlan2g";
gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l12805d@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@E0000 {
label = "APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@F0000 {
label = "APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00180000 0x00ce0000>;
};
partition9@e60000 {
label = "manufacture";
reg = <0x00e60000 0x00050000>;
read-only;
};
partition10@eb0000 {
label = "storage";
reg = <0x00eb0000 0x00150000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
};

@ -1,243 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "OpenMesh A62";
compatible = "openmesh,a62";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART >;
};
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
red {
label = "a62:red:status";
gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
power: green {
label = "a62:green:status";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
blue {
label = "a62:blue:status";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
/* hw_margin_ms is actually 300s but driver limits it to 60s */
hw_margin_ms = <60000>;
always-running;
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
enable-usb-power {
gpio-hog;
gpios = <58 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "enable USB2 power";
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
/* partitions are passed via bootloader */
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb2_hs_phy {
status = "okay";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "OM-A62";
ieee80211-freq-limit = <5170000 5350000>;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A62";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "OM-A62";
ieee80211-freq-limit = <5470000 5875000>;
};

@ -1,21 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019-ap.dk04.1.dtsi"
/ {
model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
};

@ -1,181 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
compatible = "qcom,ipq4019";
soc {
rng@22000 {
status = "okay";
};
pinctrl@1000000 {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
};
pinconf {
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio10", "gpio11";
};
pinconf {
pins = "gpio10", "gpio11";
drive-strength = <16>;
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
blsp_dma: dma@7884000 {
status = "okay";
};
spi0: spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
mx25l25635e@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "mx25l25635e";
spi-max-frequency = <24000000>;
};
};
i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
usb3_ss_phy: ssphy@9a000 {
status = "okay";
};
usb3_hs_phy: hsphy@a6000 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
usb2_hs_phy: hsphy@a8000 {
status = "okay";
};
usb2: usb2@60f8800 {
status = "okay";
};
cryptobam: dma@8e04000 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
qpic_bam: dma@7984000 {
status = "okay";
};
nand: qpic-nand@79b0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
};
};
};

@ -1,354 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "MobiPromo CM520-79F";
compatible = "mobipromo,cm520-79f";
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <1000>;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
ranges;
sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <1000000>;
};
};
leds {
compatible = "gpio-leds";
usb {
label = "cm520-79f:blue:usb";
gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
};
led_sys: can {
label = "cm520-79f:blue:can";
gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
};
wan {
label = "cm520-79f:blue:wan";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "cm520-79f:blue:lan1";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "cm520-79f:blue:lan2";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "cm520-79f:blue:wlan2g";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "cm520-79f:blue:wlan5g";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
status = "okay";
};
&blsp1_uart2 {
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
mtd-mac-address = <&art 0x1006>;
};
&gmac1 {
mtd-mac-address = <&art 0x5006>;
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "MIBIB";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "BOOTCONFIG";
reg = <0x200000 0x100000>;
};
partition@300000 {
label = "QSEE";
reg = <0x300000 0x100000>;
read-only;
};
partition@400000 {
label = "QSEE_1";
reg = <0x400000 0x100000>;
read-only;
};
partition@500000 {
label = "CDT";
reg = <0x500000 0x80000>;
read-only;
};
partition@580000 {
label = "CDT_1";
reg = <0x580000 0x80000>;
read-only;
};
partition@600000 {
label = "BOOTCONFIG1";
reg = <0x600000 0x80000>;
};
partition@680000 {
label = "APPSBLENV";
reg = <0x680000 0x80000>;
};
partition@700000 {
label = "APPSBL";
reg = <0x700000 0x200000>;
read-only;
};
partition@900000 {
label = "APPSBL_1";
reg = <0x900000 0x200000>;
read-only;
};
art: partition@b00000 {
label = "ART";
reg = <0xb00000 0x80000>;
read-only;
};
partition@b80000 {
label = "ubi";
reg = <0xb80000 0x7480000>;
};
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "CM520-79F";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "CM520-79F";
};

@ -1,80 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
*
* Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
*
*/
#include "qcom-ipq4019-e2600ac.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Qxwlan E2600AC c1";
compatible = "qxwlan,e2600ac-c1";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x180000 0x1e80000>;
};
};
};
};

@ -1,115 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
*
* Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
*
*/
#include "qcom-ipq4019-e2600ac.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Qxwlan E2600AC c2";
compatible = "qxwlan,e2600ac-c2";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
};
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x00000000 0x04000000>;
};
};
};
};
&tlmm {
nand_pins: nand-pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};

@ -1,266 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
*
* Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Qxwlan E2600AC";
compatible = "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256MB */
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
leds {
compatible = "gpio-leds";
led1 {
label = "e2600ac:green:wlan0";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
led2 {
label = "e2600ac:green:wlan1";
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
};
led3 {
label = "e2600ac:green:usb";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
linux,default-trigger = "usbport";
};
led4 {
label = "e2600ac:green:ctrl1";
gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
};
led5 {
label = "e2600ac:green:ctrl2";
gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
};
led6 {
label = "e2600ac:green:ctrl3";
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&tlmm {
i2c_0_pins: i2c-0-pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_0_pins: serial0-pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
};

@ -1,399 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Device Tree Source for Linksys EA8300 (Dallas)
*
* Copyright (C) 2019 Jeff Kletsky
*
*/
/dts-v1/;
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Linksys EA8300 (Dallas)";
compatible = "linksys,ea8300", "qcom,ipq4019";
aliases {
led-boot = &led_wps_amber;
led-failsafe = &led_wps;
led-running = &led_linksys;
led-upgrade = &led_world;
serial0 = &blsp1_uart1;
};
leds {
compatible = "gpio-leds";
// Retain node names from running OEM on EA8300
// Front panel LEDs, top to bottom
led_plug: diag {
label = "ea8300:amber:plug";
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
};
led_world: internet {
label = "ea8300:amber:world";
gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
};
led_wps: wps {
label = "ea8300:white:wps";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
};
led_wps_amber: wps_amber {
label = "ea8300:amber:wps";
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_linksys: pwr {
label = "ea8300:white:linksys";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
// On back panel, above USB socket
led_usb: usb {
label = "ea8300:green:usb";
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb3_port1>, <&usb3_port2>,
<&usb2_port1>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys";
button@0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
button@1 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
};
};
//
// OEM U-Boot provides either
// init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
// root=ubi0:ubifs rootwait rw
// or the same with ubi.mtd=13,2048
//
chosen {
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "sbl1";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "mibib";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "qsee";
reg = <0x200000 0x100000>;
read-only;
};
partition@300000 {
label = "cdt";
reg = <0x300000 0x80000>;
read-only;
};
partition@380000 {
label = "appsblenv";
reg = <0x380000 0x80000>;
read-only;
};
partition@400000 {
label = "ART";
reg = <0x400000 0x80000>;
read-only;
};
partition@480000 {
label = "appsbl";
reg = <0x480000 0x200000>;
read-only;
};
partition@680000 {
label = "u_env";
reg = <0x680000 0x80000>;
// writable -- U-Boot environment
};
partition@700000 {
label = "s_env";
reg = <0x700000 0x40000>;
// writable -- Boot counter records
};
partition@740000 {
label = "devinfo";
reg = <0x740000 0x40000>;
read-only;
};
partition@780000 {
label = "kernel";
reg = <0x780000 0x5800000>;
};
partition@a80000 {
label = "rootfs";
reg = <0xa80000 0x5500000>;
};
partition@5f80000 {
label = "alt_kernel";
reg = <0x5f80000 0x5800000>;
};
partition@6280000 {
label = "alt_rootfs";
reg = <0x6280000 0x5500000>;
};
partition@b780000 {
label = "sysdiag";
reg = <0xb780000 0x100000>;
read-only;
};
partition@b880000 {
label = "syscfg";
reg = <0xb880000 0x4680000>;
read-only;
};
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
serial_0_pins: serial0-pinmux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
// gpio61 controls led_usb
pulldowns {
pins = "gpio55", "gpio56", "gpio57",
"gpio60", "gpio62", "gpio63",
"gpio64", "gpio65", "gpio66",
"gpio67", "gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5330000>;
qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
};
&wifi2 {
status = "okay";
ieee80211-freq-limit = <5490000 5835000>;
qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
};

@ -1,282 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "EnGenius EAP2200";
compatible = "engenius,eap2200";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "eap2200:amber:power";
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "eap2200:blue:lan1";
gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "eap2200:blue:lan2";
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "eap2200:blue:wlan2g";
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "eap2200:yellow:wlan5g";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g2 {
label = "eap2200:yellow:wlan5g2";
gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy2tpt";
};
mode {
label = "eap2200:blue:mode";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
vlan_tag = <1 0x10>;
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs1";
reg = <0x00000000 0x04000000>;
};
partition@40000000 {
label = "ubi";
reg = <0x04000000 0x04000000>;
};
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
ieee80211-freq-limit = <5470000 5875000>;
qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5350000>;
qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
};

@ -1,303 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Box 7530";
compatible = "avm,fritzbox-7530";
aliases {
led-boot = &power_green;
led-failsafe = &info_red;
led-running = &power_green;
led-upgrade = &info_green;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <1>;
};
};
keys {
compatible = "gpio-keys";
wlan {
label = "wlan";
gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
dect {
label = "dect";
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PHONE>;
};
};
leds {
compatible = "gpio-leds";
info_red: info_red {
label = "fritzbox-7530:red:info";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
};
info_green: info {
label = "fritzbox-7530:green:info";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
};
wlan {
label = "fritzbox-7530:green:wlan";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
};
fon {
label = "fritzbox-7530:green:fon";
gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
power_green: power {
label = "fritzbox-7530:green:power";
gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
};
wps {
label = "fritzbox-7530:green:wps";
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
usb-power {
line-name = "enable USB3 power";
gpios = <49 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x000000 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x080000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "CDT";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "QSEE_B";
reg = <0x1c0000 0x80000>;
read-only;
};
partition@240000 {
label = "urlader0";
reg = <0x240000 0x40000>;
read-only;
};
partition@280000 {
label = "urlader1";
reg = <0x280000 0x40000>;
read-only;
};
partition@2c0000 {
label = "nand-tffs";
reg = <0x2c0000 0x840000>;
read-only;
};
partition@b00000 {
/* 'kernel1' in AVM firmware */
label = "uboot0";
reg = <0xb00000 0x400000>;
};
partition@f00000 {
/* 'kernel2' in AVM firmware */
label = "uboot1";
reg = <0xf00000 0x400000>;
};
partition@1300000 {
label = "ubi";
reg = <0x1300000 0x6d00000>;
};
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
dsl@1,0 {
compatible = "intel,vrx518";
status = "okay";
reg = <0x00010000 0 0 0 0>;
};
};
};

@ -1,267 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Repeater 1200";
compatible = "avm,fritzrepeater-1200";
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_red;
label-mac-device = &wifi0;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
switch_lan_bmp = <0x0>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
};
edma@c080000 {
status = "okay";
phy-mode = "rgmii-rxid";
qcom,num_gmac = <1>;
qcom,single-phy;
};
};
key {
compatible = "gpio-keys";
wps {
label = "WPS button";
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
power_red: power_red {
label = "fritzwlan-1200:red:power";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "fritzwlan-1200:green:power";
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
power_yellow {
label = "fritzwlan-1200:yellow:power";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
phy-reset {
line-name = "PHY-reset";
gpios = <19 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
phy-reset-2 {
line-name = "PHY-reset-2";
gpios = <47 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "CDT";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "QSEE_B";
reg = <0x1c0000 0x80000>;
read-only;
};
partition@240000 {
label = "urlader0";
reg = <0x240000 0x40000>;
read-only;
};
partition@280000 {
label = "urlader1";
reg = <0x280000 0x40000>;
read-only;
};
partition@2c0000 {
label = "nand-tffs";
reg = <0x2c0000 0x840000>;
read-only;
};
partition@b00000 {
/* 'kernel1' in AVM firmware */
label = "uboot0";
reg = <0xb00000 0x400000>;
};
partition@f00000 {
/* 'kernel2' in AVM firmware */
label = "uboot1";
reg = <0xf00000 0x400000>;
};
partition@1300000 {
label = "ubi";
reg = <0x1300000 0x6d00000>;
};
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
};
&gmac0 {
qcom,phy_mdio_addr = <0>;
qcom,poll_required = <1>;
vlan_tag = <0 0x20>;
};

@ -1,264 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "AVM FRITZ!Repeater 3000";
compatible = "avm,fritzrepeater-3000";
aliases {
led-boot = &power_led;
led-failsafe = &power_led;
led-running = &power_led;
led-upgrade = &power_led;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
key {
compatible = "gpio-keys";
connect {
label = "Connect";
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
connect_red {
label = "fritzwlan-3000:red:connect";
gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
};
connect_green {
label = "fritzwlan-3000:green:connect";
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
};
connect_blue {
label = "fritzwlan-3000:blue:connect";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
};
power_led: power {
label = "fritzwlan-3000:green:power";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x000000 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x080000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "CDT";
reg = <0x180000 0x40000>;
read-only;
};
partition@1c0000 {
label = "QSEE_B";
reg = <0x1c0000 0x80000>;
read-only;
};
partition@240000 {
label = "urlader0";
reg = <0x240000 0x40000>;
read-only;
};
partition@280000 {
label = "urlader1";
reg = <0x280000 0x40000>;
read-only;
};
partition@2c0000 {
label = "nand-tffs";
reg = <0x2c0000 0x840000>;
read-only;
};
partition@b00000 {
/* 'kernel1' in AVM firmware */
label = "uboot0";
reg = <0xb00000 0x400000>;
};
partition@f00000 {
/* 'kernel2' in AVM firmware */
label = "uboot1";
reg = <0xf00000 0x400000>;
};
partition@1300000 {
label = "ubi";
reg = <0x1300000 0x6d00000>;
};
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5350000>;
/* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
/* QCA9984 */
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
ieee80211-freq-limit = <5470000 5875000>;
/* Uses the reference BDF */
};
};
};

@ -1,357 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2019, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "8devices Habanero DVK";
compatible = "8dev,habanero-dvk";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_upgrade;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
status = "okay";
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "habanero-dvk:green:status";
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_upgrade: upgrade {
label = "habanero-dvk:green:upgrade";
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "habanero-dvk:green:wlan2g";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "habanero-dvk:green:wlan5g";
gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
};
};
&vqmmc {
status = "okay";
};
&sdhci {
status = "okay";
pinctrl-0 = <&sd_pins>;
pinctrl-names = "default";
cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
vqmmc-supply = <&vqmmc>;
};
&qpic_bam {
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56", "gpio57",
"gpio60", "gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67", "gpio68",
"gpio69";
function = "qpic";
bias-pull-down;
};
};
sd_pins: sd_pins {
pinmux {
function = "sdio";
pins = "gpio23", "gpio24", "gpio25", "gpio26",
"gpio28", "gpio29", "gpio30", "gpio31";
drive-strength = <10>;
};
pinmux_sd_clk {
function = "sdio";
pins = "gpio27";
drive-strength = <16>;
};
pinmux_sd7 {
function = "sdio";
pins = "gpio32";
drive-strength = <10>;
bias-disable;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env */
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition@180000 {
label = "cfg";
reg = <0x00180000 0x00040000>;
};
partition@1c0000 {
label = "firmware";
compatible = "denx,fit";
reg = <0x001c0000 0x01e40000>;
};
};
};
};
/* Some DVK boards ship without NAND */
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
/* Free slot for use */
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Habanero";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Habanero";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

@ -1,311 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/dts-v1/;
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS Lyra MAP-AC2200";
compatible = "asus,map-ac2200";
aliases {
led-boot = &led_blue0;
led-failsafe = &led_red0;
led-running = &led_blue0;
led-upgrade = &led_red0;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "CDT";
reg = <0x200000 0x80000>;
read-only;
};
partition@280000 {
label = "APPSBL";
reg = <0x280000 0x140000>;
read-only;
};
partition@3c0000 {
label = "APPSBLENV";
reg = <0x3c0000 0x40000>;
read-only;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7c00000>;
};
};
};
};
&tlmm {
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio20", "gpio21";
drive-strength = <16>;
bias-disable;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
ieee80211-freq-limit = <5470000 5875000>;
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
ieee80211-freq-limit = <5170000 5350000>;
};
};
};
&usb2_hs_phy {
/* Bluetooth module attached via USB */
status = "okay";
};
&blsp1_i2c3 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
led-controller@32 {
/* 9-channel RGB LED controller */
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = [01];
led_blue0: blue0 {
chan-name = "blue0";
label = "map-ac2200:blue:chan0";
led-cur = [fa];
max-cur = [ff];
};
blue1 {
chan-name = "blue1";
label = "map-ac2200:blue:chan1";
led-cur = [fa];
max-cur = [ff];
};
blue2 {
chan-name = "blue2";
label = "map-ac2200:blue:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_green0: green0 {
chan-name = "green0";
label = "map-ac2200:green:chan0";
led-cur = [fa];
max-cur = [ff];
};
green1 {
chan-name = "green1";
label = "map-ac2200:green:chan1";
led-cur = [fa];
max-cur = [ff];
};
green2 {
chan-name = "green2";
label = "map-ac2200:green:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_red0: red0 {
chan-name = "red0";
label = "map-ac2200:red:chan0";
led-cur = [fa];
max-cur = [ff];
};
red1 {
chan-name = "red1";
label = "map-ac2200:red:chan1";
led-cur = [fa];
max-cur = [ff];
};
red2 {
chan-name = "red2";
label = "map-ac2200:red:chan2";
led-cur = [fa];
max-cur = [ff];
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};

@ -1,385 +0,0 @@
// SPDX-License-Identifier: ISC
// Copyright (c) 2015, The Linux Foundation. All rights reserved.
// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>.
// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>.
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Cell C RTL30VW";
compatible = "cellc,rtl30vw";
aliases {
led-boot = &led_power_blue;
led-failsafe = &led_power_red;
led-running = &led_power_blue;
led-upgrade = &led_power_red;
};
chosen {
bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro";
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
num-chipselects = <1>;
mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <2>;
spi-max-frequency = <1000000>;
};
};
leds {
compatible = "gpio-leds";
led_power_blue: power_blue {
gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:power";
default-state = "on";
};
led_power_red: power_red {
gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:red:power";
};
tp28 {
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
label = "rtl30vw:ext:tp28";
default-state = "keep";
};
tp27 {
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
label = "rtl30vw:ext:tp27";
default-state = "keep";
};
wlan2g {
gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:wlan2g";
linux,default-trigger = "phy0tpt";
};
wlan5g {
gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:wlan5g";
linux,default-trigger = "phy1tpt";
};
wps {
gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:wps";
};
voip {
gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:voip";
};
s1 {
gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:s1";
};
s2 {
gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:s2";
};
s3 {
gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:s3";
};
s4 {
gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:blue:s4";
};
signal {
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
label = "rtl30vw:red:signal";
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
};
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
/*"n25q128a11" is required for proper nand recognition in u-boot. */
compatible = "jedec,spi-nor", "n25q128a11";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
label = "0:BOOTCONFIG";
reg = <0x180000 0x10000>;
read-only;
};
};
};
flash@1 {
/*
* Factory U-boot looks in 0:BOOTCONFIG partition for active
* partitions settings and mangle partition config. So kernel
* /kernel_1 and rootfs/rootfs_1 pairs can be swaped.
* It isn't a problem but we never can be sure where OFW put
* factory images. "spinand,mt29f" value is required for proper
* nand recognition in u-boot.
*/
compatible = "spi-nand","spinand,mt29f";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "rootfs";
reg = <0x400000 0x2000000>;
};
partition@2400000 {
label = "kernel_1";
reg = <0x2400000 0x400000>;
};
partition@2800000 {
label = "rootfs_1";
reg = <0x2800000 0x2000000>;
};
partition@4800000 {
label = "ubifs";
reg = <0x4800000 0x3800000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "cellc,rtl30vw";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "cellc,rtl30vw";
};

@ -1,79 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qcom-ipq4019-u4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Unielec U4019 (32M)";
compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
broken-flash-reset;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x180000 0x1e80000>;
};
};
};
};

@ -1,224 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
compatible = "unielec,u4019","qcom,ipq4019";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
serial0 = &blsp1_uart1;
serial1 = &blsp1_uart2;
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_status: led2 {
label = "u4019:green:led2";
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_uart2 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_0_pins: serial0-pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
led_pins: led_pinmux {
mux {
function = "gpio";
pins = "gpio68";
bias-disabled;
output-low;
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};

@ -1,375 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Compex WPJ419";
compatible = "compex,wpj419", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
reserved-memory {
ranges;
rsvd1@87000000 {
/* Reserved for other subsystem */
reg = <0x87000000 0x500000>;
no-map;
};
wifi_dump@87500000 {
reg = <0x87500000 0x600000>;
no-map;
};
rsvd2@87B00000 {
/* Reserved for other subsystem */
reg = <0x87B00000 0x500000>;
no-map;
};
};
chosen {
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
};
soc {
pinctrl@1000000 {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
bias-disable;
output-high;
};
};
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
led_0_pins: led0_pinmux {
mux_1 {
pins = "gpio36";
function = "led0";
bias-pull-down;
};
mux_2 {
pins = "gpio40";
function = "led4";
bias-pull-down;
};
};
};
blsp_dma: dma@7884000 {
status = "okay";
};
spi_0: spi@78b5000 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
num-cs = <2>;
flash0@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
broken-flash-reset;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x040000 0x020000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x060000 0x060000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0x0c0000 0x010000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0x0d0000 0x010000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0x0e0000 0x010000>;
};
partition@f0000 {
label = "u-boot";
reg = <0x0f0000 0x080000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x010000>;
read-only;
};
};
};
nand@1 {
reg = <1>;
status = "okay";
compatible = "spi-nand";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/* The device has 128MB, but we can only address
* 64MB because of the bootloader's default settings.
* This is due to the old mt29f driver,
* which detected the deivce with only 64MB
*/
partition@0 {
label = "ubi";
reg = <0x0000000 0x4000000>;
};
};
};
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <5000>;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
i2c_0: i2c@78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
usb3_ss_phy: ssphy@9a000 {
status = "okay";
};
usb3_hs_phy: hsphy@a6000 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
usb2_hs_phy: hsphy@a8000 {
status = "okay";
};
usb2: usb2@60f8800 {
status = "okay";
};
cryptobam: dma@8e04000 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_lan_bmp = <0x1e>;
switch_wan_bmp = <0x20>;
status = "okay";
};
edma@c080000 {
status = "okay";
};
qpic_bam: dma@7984000 {
status = "okay";
};
pcie0: pci@40000000 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
nand: qpic-nand@79b0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
};
};
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};

@ -1,288 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
* Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Compex WPJ428";
compatible = "compex,wpj428";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
aliases {
led-boot = &status;
led-failsafe = &status;
led-upgrade = &status;
};
leds {
compatible = "gpio-leds";
status: rss4 {
label = "wpj428:green:rss4";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
rss3 {
label = "wpj428:green:rss3";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition5@f0000 {
label = "0:APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition5@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition6@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00180000 0x01e80000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
};
&wifi1 {
status = "okay";
};

@ -1,180 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Aruba AP-303";
compatible = "aruba,ap-303";
aliases {
led-boot = &led_system_green;
led-failsafe = &led_system_red;
led-running = &led_system_green;
led-upgrade = &led_system_red;
};
leds {
compatible = "gpio-leds";
wifi_green {
label = "ap-303:green:wifi";
gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wifi_amber {
label = "ap-303:amber:wifi";
gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
led_system_red: system_red {
label = "ap-303:red:system";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
};
led_system_green: system_green {
label = "ap-303:green:system";
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
/*
* In addition to the Pins listed below,
* the following GPIOs have "features":
* 54 - out - active low to force HW reset
* 41 - out - active low to reset TPM
* 43 - out - active low to reset BLE radio
* 19 - in - active high when DC powered
*/
phy-reset {
line-name = "PHY-reset";
gpios = <42 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/*
* There is no partition map for the NOR flash
* in the stock firmware.
*
* All partitions here are based on offsets
* found in the U-Boot GPL code and information
* from smem.
*/
partition@0 {
label = "sbl1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "mibib";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "qsee";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "cdt";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "ddrparams";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "ART";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "appsbl";
reg = <0xf0000 0xf0000>;
read-only;
};
partition@1e0000 {
label = "mfginfo";
reg = <0x1e0000 0x10000>;
read-only;
};
partition@1f0000 {
label = "apcd";
reg = <0x1f0000 0x10000>;
read-only;
};
partition@200000 {
label = "osss";
reg = <0x200000 0x180000>;
read-only;
};
partition@380000 {
/* This is empty */
label = "appsblenv";
reg = <0x380000 0x10000>;
read-only;
};
partition@390000 {
label = "pds";
reg = <0x390000 0x10000>;
read-only;
};
partition@3a0000 {
label = "fcache";
reg = <0x3a0000 0x10000>;
read-only;
};
partition@3b0000 {
/* Called osss1 in smem */
label = "u-boot-env-bak";
reg = <0x3b0000 0x10000>;
read-only;
};
partition@3f0000 {
label = "u-boot-env";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};

@ -1,421 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Aruba AP-303H";
compatible = "aruba,ap-303h";
aliases {
led-boot = &led_system_green;
led-failsafe = &led_system_red;
led-running = &led_system_green;
led-upgrade = &led_system_amber;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
i2c_0: i2c@78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
tpm@29 {
/* No Driver */
compatible = "atmel,at97sc3203";
reg = <0x29>;
read-only;
};
power-monitor@40 {
/* No driver */
compatible = "isl,isl28022";
reg = <0x40>;
};
};
};
leds {
compatible = "gpio-leds";
wifi_green {
label = "ap-303h:green:wifi";
gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wifi_amber {
label = "ap-303h:amber:wifi";
gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
pse {
label = "ap-303h:green:pse";
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
};
led_system_red: system_red {
label = "ap-303h:red:system";
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
};
led_system_green: system_green {
label = "ap-303h:green:system";
gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
};
led_system_amber: system_amber {
label = "ap-303h:amber:system";
gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_uart2 {
/* Texas Instruments CC2540T BLE radio */
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&tlmm {
/*
* In addition to the Pins listed below,
* the following GPIOs have "features":
* 39 - out - active low to force HW reset
* 32 - out - active low to reset TPM
* 43 - out - active low to reset BLE radio
* 41 - out - pulse to set warm reset status
* 34 - out - active low to enable PSE port
* 22 - in - active low when 802.3at powered
* 29 - in - active high when DC powered
* 40 - in - active low when reset due to cold HW reset
* 30 - in - active low when USB overcurrent detected
* 35 - in - interrupt line for power monitor chip
* 31 - in - active low when PSE port active
*/
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
drive-strength = <4>;
bias-disable;
};
};
serial_0_pins: serial_0_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial_1_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
usb-power {
line-name = "USB-power";
gpios = <23 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/*
* There is no partition map for the NOR flash
* in the stock firmware.
*
* All partitions here are based on offsets
* found in the U-Boot GPL code and information
* from smem.
*/
partition@0 {
label = "sbl1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "mibib";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "qsee";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "cdt";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "ddrparams";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "appsblenv";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "appsbl";
reg = <0xf0000 0x100000>;
read-only;
};
partition@1e0000 {
label = "ART";
reg = <0x1f0000 0x10000>;
read-only;
};
partition@1f0000 {
label = "osss";
reg = <0x200000 0x170000>;
read-only;
};
partition@200000 {
label = "pds";
reg = <0x370000 0x10000>;
read-only;
};
partition@380000 {
label = "apcd";
reg = <0x380000 0x10000>;
read-only;
};
partition@390000 {
label = "mfginfo";
reg = <0x390000 0x10000>;
read-only;
};
partition@3a0000 {
label = "fcache";
reg = <0x3a0000 0x10000>;
read-only;
};
partition@3b0000 {
/* Called osss1 in smem */
label = "u-boot-env-bak";
reg = <0x3b0000 0x10000>;
read-only;
};
partition@3f0000 {
label = "u-boot-env";
reg = <0x3c0000 0x40000>;
read-only;
};
};
};
flash@1 {
status = "okay";
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
/* 'aos0' in Aruba firmware */
label = "aos0";
reg = <0x0 0x2000000>;
read-only;
};
partition@2000000 {
/* 'aos1' in Aruba firmware */
label = "ubi";
reg = <0x2000000 0x2000000>;
};
partition@4000000 {
label = "aruba-ubifs";
reg = <0x4000000 0x4000000>;
read-only;
};
};
};
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};

@ -1,193 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Aruba AP-365";
compatible = "aruba,ap-365";
aliases {
led-boot = &led_system_green;
led-failsafe = &led_system_red;
led-running = &led_system_green;
led-upgrade = &led_system_red;
};
leds {
compatible = "gpio-leds";
led_system_red: system_red {
label = "ap-365:red:system";
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
};
led_system_green: system_green {
label = "ap-365:green:system";
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
};
system_amber {
label = "ap-365:amber:system";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
};
watchdog {
compatible = "linux,wdt-gpio";
gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
hw_algo = "toggle";
hw_margin_ms = <1000>;
always-running;
};
};
&tlmm {
/*
* In addition to the Pins listed below,
* the following GPIOs have "features":
* 39 - out - pulse low to reset watchdog status flipflop
* 40 - out - active high to enable watchdog
* 41 - out - watchdog poke
* 42 - out - active low to reset BLE radio
* 43 - out - active low to reset TPM
* 47 - out - pulse low to reset warm reset status
* 54 - out - active low to force HW reset
* 18 - in - PHY interrupt line
* 45 - in - power monitor interrupt
* 48 - in - active low when cold reset
* 52 - in - active high when watchdog reset
*/
phy-reset {
line-name = "PHY-reset";
gpios = <42 GPIO_ACTIVE_HIGH>;
gpio-hog;
output-high;
};
};
&i2c_0 {
power-monitor@40 {
/* No driver */
compatible = "isl,isl28022";
reg = <0x40>;
};
temperature-sensor@48 {
compatible = "adi,ad7416";
reg = <0x48>;
};
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/*
* There is no partition map for the NOR flash
* in the stock firmware.
*
* All partitions here are based on offsets
* found in the U-Boot GPL code and information
* from smem.
*/
partition@0 {
label = "sbl1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "mibib";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "qsee";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "cdt";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "ddrparams";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "appsbl";
reg = <0xf0000 0x100000>;
read-only;
};
partition@1f0000 {
label = "ART";
reg = <0x1f0000 0x10000>;
read-only;
};
partition@200000 {
label = "osss";
reg = <0x200000 0x170000>;
read-only;
};
partition@370000 {
label = "pds";
reg = <0x370000 0x10000>;
read-only;
};
partition@380000 {
label = "apcd";
reg = <0x380000 0x10000>;
read-only;
};
partition@390000 {
label = "mfginfo";
reg = <0x390000 0x10000>;
read-only;
};
partition@3a0000 {
label = "fcache";
reg = <0x3a0000 0x10000>;
read-only;
};
partition@3b0000 {
label = "osss1";
reg = <0x3b0000 0x50000>;
read-only;
};
};
};
};

@ -1,249 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
/delete-node/ ethernet-phy@0;
/delete-node/ ethernet-phy@2;
/delete-node/ ethernet-phy@3;
/delete-node/ ethernet-phy@4;
ethernet-phy@5 {
reg = <0x5>;
};
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
switch_lan_bmp = <0x0>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
};
edma@c080000 {
qcom,single-phy;
qcom,num_gmac = <1>;
phy-mode = "rgmii-id";
status = "okay";
};
i2c_0: i2c@78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
tpm@29 {
/* No Driver */
compatible = "atmel,at97sc3203";
reg = <0x29>;
read-only;
};
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
/* Texas Instruments CC2540T BLE radio */
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_uart2 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <5>;
qcom,poll_required = <1>;
vlan_tag = <0 0x20>;
};
&qpic_bam {
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio10", "gpio11";
function = "blsp_i2c0";
drive-strength = <4>;
bias-disable;
};
};
serial_0_pins: serial_0_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial_1_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
/* 'aos0' in Aruba firmware */
label = "aos0";
reg = <0x0 0x2000000>;
read-only;
};
partition@2000000 {
/* 'aos1' in Aruba firmware */
label = "ubi";
reg = <0x2000000 0x2000000>;
};
partition@4000000 {
label = "aruba-ubifs";
reg = <0x4000000 0x4000000>;
read-only;
};
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};

@ -1,280 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "GL.iNet GL-B1300";
compatible = "glinet,gl-b1300";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x18>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power: power {
label = "gl-b1300:green:power";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
mesh {
label = "gl-b1300:green:mesh";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "gl-b1300:green:wlan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l25635f@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
QSEE@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
CDT@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
DDRPARAMS@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
APPSBLENV@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
APPSBL@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
ART@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
firmware@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x180000 0x1e80000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
};
pinmux_cs {
function = "gpio";
pins = "gpio54";
};
pinconf {
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "GL-B1300";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "GL-B1300";
};

@ -1,400 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for Meraki MR33 (Stinkbug)
*
* Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
* Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com>
*
* Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Meraki MR33 Access Point";
compatible = "meraki,mr33";
aliases {
led-boot = &status_green;
led-failsafe = &status_red;
led-running = &status_green;
led-upgrade = &power_orange;
};
/* Do we really need this defined? */
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
/* It is a 56-bit counter that supplies the count to the ARM arch
timers and without upstream driver */
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
bluetooth {
compatible = "ti,cc2650";
enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
switch_lan_bmp = <0x0>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
};
edma@c080000 {
qcom,single-phy;
qcom,num_gmac = <1>;
phy-mode = "rgmii-rxid";
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power_orange: power {
label = "mr33:orange:power";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
panic-indicator;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <1>;
qcom,poll_required = <1>;
vlan_tag = <0 0x20>;
};
&blsp1_i2c3 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
at24@50 {
compatible = "atmel,24c64";
pagesize = <32>;
reg = <0x50>;
read-only; /* This holds our MAC & Meraki board-data */
};
};
&blsp1_i2c4 {
pinctrl-0 = <&i2c_1_pins>;
pinctrl-names = "default";
status = "okay";
led-controller@30 {
compatible = "ti,lp5562";
reg = <0x30>;
clock-mode = /bits/8 <2>;
enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
/* RGB led */
status_red: chan0 {
chan-name = "mr33:red:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
status_green: chan1 {
chan-name = "mr33:green:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan2 {
chan-name = "mr33:blue:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
chan3 {
chan-name = "mr33:white:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "sbl1";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "mibib";
reg = <0x00100000 0x00100000>;
read-only;
};
partition@200000 {
label = "bootconfig";
reg = <0x00200000 0x00100000>;
read-only;
};
partition@300000 {
label = "qsee";
reg = <0x00300000 0x00100000>;
read-only;
};
partition@400000 {
label = "qsee_alt";
reg = <0x00400000 0x00100000>;
read-only;
};
partition@500000 {
label = "cdt";
reg = <0x00500000 0x00080000>;
read-only;
};
partition@580000 {
label = "cdt_alt";
reg = <0x00580000 0x00080000>;
read-only;
};
partition@600000 {
label = "ddrparams";
reg = <0x00600000 0x00080000>;
read-only;
};
partition@700000 {
label = "u-boot";
reg = <0x00700000 0x00200000>;
read-only;
};
partition@900000 {
label = "u-boot-backup";
reg = <0x00900000 0x00200000>;
read-only;
};
partition@b00000 {
label = "ART";
reg = <0x00b00000 0x00080000>;
read-only;
};
partition@c00000 {
label = "ubi";
reg = <0x00c00000 0x07000000>;
/*
* Do not try to allocate the remaining
* 4 MiB to this ubi partition. It will
* confuse the u-boot and it might not
* find the kernel partition anymore.
*/
};
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
/*
* GPIO43 should be 0/1 whenever the unit is
* powered through PoE or AC-Adapter.
* That said, playing with this seems to
* reset the AP.
*/
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
/* We use the i2c-0 pins for serial_1 */
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio20", "gpio21";
};
pinconf {
pins = "gpio20", "gpio21";
drive-strength = <16>;
bias-disable;
};
};
i2c_1_pins: i2c_1_pinmux {
pinmux {
function = "blsp_i2c1";
pins = "gpio34", "gpio35";
};
pinconf {
pins = "gpio34", "gpio35";
drive-strength = <16>;
bias-disable;
};
};
nand_pins: nand_pins {
/*
* There are 18 pins. 15 pins are common between LCD and NAND.
* The QPIC controller arbitrates between LCD and NAND. Of the
* remaining 4, 2 are for NAND and 2 are for LCD exclusively.
*
* The meraki source hints that the bluetooth module claims
* pin 52 as well. But sadly, there's no data whenever this
* is a NAND or LCD exclusive pin or not.
*/
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Meraki-MR33";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Meraki-MR33";
};
Loading…
Cancel
Save