From f46f45d43ebc439e16bdad256d4f160d988536a4 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Thu, 17 Feb 2005 23:31:32 +0000 Subject: [PATCH] modified version of Olegs shellscript SVN-Revision: 256 --- openwrt/flash.sh | 54 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 openwrt/flash.sh diff --git a/openwrt/flash.sh b/openwrt/flash.sh new file mode 100644 index 0000000000..aedb25072c --- /dev/null +++ b/openwrt/flash.sh @@ -0,0 +1,54 @@ +#!/bin/bash + +# flash script for linksys and asus routers +# +# Copyright (C) 2004 by Oleg I. Vdovikin +# Copyright (C) 2005 by Waldemar Brodkorb +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then + echo Usage: $0 firmware vendor +cat << EOF +IMPORTANT: +Notes for Linksys Routers: + be sure you have set boot_wait to yes. Power on your router + after executing this script. + Use openwrt-gs-code.bin or openwrt-g-code.bin as firmware. + +Notes for Asus Routers: + be sure POWER led is flashing (If this is not a case + poweroff the device, push the reset button & power on + it again, then release button) + Use openwrt-linux.trx as firmware. + +1) connect your pc to the LAN port +2) be sure your link is up and has an address in the + 192.168.1.0/24 address range (and not the 192.168.1.1) +EOF + exit 0 +fi +if [ "$2" == "asus" ]; then +echo Confirming IP address setting... +echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 +echo Flashing 192.168.1.1 using $1... +echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 +echo Please wait until leds stops flashing. +elif [ "$2" == "linksys" ]; then +echo Flashing 192.168.1.1 using $1... +echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 +echo Please wait until power led stops flashing. Then you can login via telnet 192.168.1.1 +fi