remove some unused crap

SVN-Revision: 11472
v19.07.3_mercusys_ac12_duma
Felix Fietkau 16 years ago
parent ddd809f9e5
commit f2e997ac38

File diff suppressed because it is too large Load Diff

@ -1,123 +0,0 @@
/*
* 802.11e protocol header file
*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id: 802.11e.h,v 1.1.1.2 2007/05/31 08:00:41 michael Exp $
*/
#ifndef _802_11e_H_
#define _802_11e_H_
/* enable structure packing */
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#pragma pack(1)
#define PACKED
#endif
#ifdef BCMDBG
extern const char *aci_names[];
#endif /* BCMDBG */
/* WME Traffic Specification (TSPEC) element */
#define WME_TSPEC_HDR_LEN 2 /* WME TSPEC header length */
#define WME_TSPEC_BODY_OFF 2 /* WME TSPEC body offset */
#define WME_CATEGORY_CODE_OFFSET 0 /* WME Category code offset */
#define WME_ACTION_CODE_OFFSET 1 /* WME Action code offset */
#define WME_TOKEN_CODE_OFFSET 2 /* WME Token code offset */
#define WME_STATUS_CODE_OFFSET 3 /* WME Status code offset */
struct tsinfo {
uint8 octets[3];
} PACKED;
typedef struct tsinfo tsinfo_t;
/* 802.11e TSPEC IE */
typedef struct tspec {
uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */
uint8 type; /* WME_TYPE */
uint8 subtype; /* WME_SUBTYPE_TSPEC */
uint8 version; /* WME_VERSION */
tsinfo_t tsinfo; /* TS Info bit field */
uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */
uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */
uint32 min_srv_interval; /* Minimum Service Interval (us) */
uint32 max_srv_interval; /* Maximum Service Interval (us) */
uint32 inactivity_interval; /* Inactivity Interval (us) */
uint32 suspension_interval; /* Suspension Interval (us) */
uint32 srv_start_time; /* Service Start Time (us) */
uint32 min_data_rate; /* Minimum Data Rate (bps) */
uint32 mean_data_rate; /* Mean Data Rate (bps) */
uint32 peak_data_rate; /* Peak Data Rate (bps) */
uint32 max_burst_size; /* Maximum Burst Size (bytes) */
uint32 delay_bound; /* Delay Bound (us) */
uint32 min_phy_rate; /* Minimum PHY Rate (bps) */
uint16 surplus_bw; /* Surplus Bandwidth Allowance Factor */
uint16 medium_time; /* Medium Time (32 us/s periods) */
} PACKED tspec_t;
#define WME_TSPEC_LEN (sizeof(tspec_t)) /* not including 2-bytes of header */
/* ts_info */
/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
#define TS_INFO_TID_SHIFT 1 /* TS info. TID shift */
#define TS_INFO_TID_MASK (0xf << TS_INFO_TID_SHIFT) /* TS info. TID mask */
#define TS_INFO_CONTENTION_SHIFT 7 /* TS info. contention shift */
#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) /* TS info. contention mask */
#define TS_INFO_DIRECTION_SHIFT 5 /* TS info. direction shift */
#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) /* TS info. direction mask */
#define TS_INFO_PSB_SHIFT 2 /* TS info. PSB bit Shift */
#define TS_INFO_PSB_MASK (1 << TS_INFO_PSB_SHIFT) /* TS info. PSB mask */
#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) /* TS info. uplink */
#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) /* TS info. downlink */
#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) /* TS info. bidirectional */
#define TS_INFO_USER_PRIO_SHIFT 3 /* TS info. user priority shift */
/* TS info. user priority mask */
#define TS_INFO_USER_PRIO_MASK (0x7 << TS_INFO_USER_PRIO_SHIFT)
/* Macro to get/set bit(s) field in TSINFO */
#define WLC_CAC_GET_TID(pt) ((((pt).octets[0]) & TS_INFO_TID_MASK) >> TS_INFO_TID_SHIFT)
#define WLC_CAC_GET_DIR(pt) ((((pt).octets[0]) & \
TS_INFO_DIRECTION_MASK) >> TS_INFO_DIRECTION_SHIFT)
#define WLC_CAC_GET_PSB(pt) ((((pt).octets[1]) & WLC_CAC_PSB_MASK) >> WLC_CAC_PSB_SHIFT)
#define WLC_CAC_GET_USER_PRIO(pt) ((((pt).octets[1]) & \
TS_INFO_USER_PRIO_MASK) >> TS_INFO_USER_PRIO_SHIFT)
#define WLC_CAC_SET_TID(pt, id) ((((pt).octets[0]) & (~TS_INFO_TID_MASK)) | \
((id) << TS_INFO_TID_SHIFT))
#define WLC_CAC_SET_USER_PRIO(pt, prio) ((((pt).octets[0]) & (~TS_INFO_USER_PRIO_MASK)) | \
((prio) << TS_INFO_USER_PRIO_SHIFT))
/* 802.11e QBSS Load IE */
#define QBSS_LOAD_IE_LEN 5 /* QBSS Load IE length */
#define QBSS_LOAD_AAC_OFF 3 /* AAC offset in IE */
#define CAC_ADDTS_RESP_TIMEOUT 300 /* default ADDTS response timeout in ms */
/* 802.11e ADDTS status code */
#define DOT11E_STATUS_ADMISSION_ACCEPTED 0 /* TSPEC Admission accepted status */
#define DOT11E_STATUS_ADDTS_INVALID_PARAM 1 /* TSPEC invalid parameter status */
#define DOT11E_STATUS_ADDTS_REFUSED_NSBW 3 /* ADDTS refused (non-sufficient BW) */
/* 802.11e DELTS status code */
#define DOT11E_STATUS_QSTA_LEAVE_QBSS 36 /* STA leave QBSS */
#define DOT11E_STATUS_END_TS 37 /* END TS */
#define DOT11E_STATUS_UNKNOWN_TS 38 /* UNKNOWN TS */
#define DOT11E_STATUS_QSTA_REQ_TIMEOUT 39 /* STA ADDTS request timeout */
#undef PACKED
#if !defined(__GNUC__)
#pragma pack()
#endif
#endif /* _802_11e_CAC_H_ */

@ -1,38 +0,0 @@
/*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* Fundamental types and constants relating to 802.1D
*
* $Id: 802.1d.h,v 1.1.1.2 2007/05/31 08:00:41 michael Exp $
*/
#ifndef _802_1_D_
#define _802_1_D_
/* 802.1D priority defines */
#define PRIO_8021D_NONE 2 /* None = - */
#define PRIO_8021D_BK 1 /* BK - Background */
#define PRIO_8021D_BE 0 /* BE - Best-effort */
#define PRIO_8021D_EE 3 /* EE - Excellent-effort */
#define PRIO_8021D_CL 4 /* CL - Controlled Load */
#define PRIO_8021D_VI 5 /* Vi - Video */
#define PRIO_8021D_VO 6 /* Vo - Voice */
#define PRIO_8021D_NC 7 /* NC - Network Control */
#define MAXPRIO 7 /* 0-7 */
#define NUMPRIO (MAXPRIO + 1)
#define ALLPRIO -1 /* All prioirty */
/* Converts prio to precedence since the numerical value of
* PRIO_8021D_BE and PRIO_8021D_NONE are swapped.
*/
#define PRIO2PREC(prio) \
(((prio) == PRIO_8021D_NONE || (prio) == PRIO_8021D_BE) ? ((prio^2)) : (prio))
#endif /* _802_1_D__ */

@ -1,20 +0,0 @@
/*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
* the contents of this file may not be disclosed to third parties, copied
* or duplicated in any form, in whole or in part, without the prior
* written permission of Broadcom Corporation.
*
* Fundamental constants relating to 802.3
*
* $Id: 802.3.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
*/
#ifndef _802_3_h_
#define _802_3_h_
#define SNAP_HDR_LEN 6 /* 802.3 LLC/SNAP header length */
#endif /* #ifndef _802_3_h_ */

@ -1,60 +0,0 @@
/*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
* the contents of this file may not be disclosed to third parties, copied
* or duplicated in any form, in whole or in part, without the prior
* written permission of Broadcom Corporation.
*
* Fundamental constants relating to ARP Protocol
*
* $Id: bcmarp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
*/
#ifndef _bcmarp_h_
#define _bcmarp_h_
/* enable structure packing */
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#pragma pack(1)
#define PACKED
#endif
#define ARP_OPC_OFFSET 6 /* option code offset */
#define ARP_SRC_ETH_OFFSET 8 /* src h/w address offset */
#define ARP_SRC_IP_OFFSET 14 /* src IP address offset */
#define ARP_TGT_ETH_OFFSET 18 /* target h/w address offset */
#define ARP_TGT_IP_OFFSET 24 /* target IP address offset */
#define ARP_OPC_REQUEST 1 /* ARP request */
#define ARP_OPC_REPLY 2 /* ARP reply */
#define ARP_DATA_LEN 28 /* ARP data length */
struct bcmarp {
uint16 htype; /* Header type (1 = ethernet) */
uint16 ptype; /* Protocol type (0x800 = IP) */
uint8 hlen; /* Hardware address length (Eth = 6) */
uint8 plen; /* Protocol address length (IP = 4) */
uint16 oper; /* ARP_OPC_... */
uint8 src_eth[ETHER_ADDR_LEN]; /* Source hardware address */
uint8 src_ip[IPV4_ADDR_LEN]; /* Source protocol address (not aligned) */
uint8 dst_eth[ETHER_ADDR_LEN]; /* Destination hardware address */
uint8 dst_ip[IPV4_ADDR_LEN]; /* Destination protocol address */
} PACKED;
/* Ethernet header + Arp message */
struct bcmetharp {
struct ether_header eh;
struct bcmarp arp;
} PACKED;
#undef PACKED
#if !defined(__GNUC__)
#pragma pack()
#endif
#endif /* !defined(_bcmarp_h_) */

@ -1,36 +0,0 @@
/*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
* the contents of this file may not be disclosed to third parties, copied
* or duplicated in any form, in whole or in part, without the prior
* written permission of Broadcom Corporation.
*
* Fundamental constants relating to DHCP Protocol
*
* $Id: bcmdhcp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
*/
#ifndef _bcmdhcp_h_
#define _bcmdhcp_h_
/* DHCP params */
#define DHCP_TYPE_OFFSET 0 /* DHCP type (request|reply) offset */
#define DHCP_FLAGS_OFFSET 10 /* DHCP flags offset */
#define DHCP_CIADDR_OFFSET 12 /* DHCP client IP address offset */
#define DHCP_YIADDR_OFFSET 16 /* DHCP your IP address offset */
#define DHCP_GIADDR_OFFSET 24 /* DHCP relay agent IP address offset */
#define DHCP_CHADDR_OFFSET 28 /* DHCP client h/w address offset */
#define DHCP_TYPE_REQUEST 1 /* DHCP request (discover|request) */
#define DHCP_TYPE_REPLY 2 /* DHCP reply (offset|ack) */
#define DHCP_PORT_SERVER 67 /* DHCP server UDP port */
#define DHCP_PORT_CLIENT 68 /* DHCP client UDP port */
#define DHCP_FLAG_BCAST 0x8000 /* DHCP broadcast flag */
#define DHCP_FLAGS_LEN 2 /* DHCP flags field length */
#endif /* #ifndef _bcmdhcp_h_ */

@ -1,101 +0,0 @@
/*
* Broadcom Ethernettype protocol definitions
*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id: bcmeth.h,v 1.1.1.5 2007/05/31 08:00:41 michael Exp $
*/
/*
* Broadcom Ethernet protocol defines
*/
#ifndef _BCMETH_H_
#define _BCMETH_H_
/* enable structure packing */
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#pragma pack(1)
#define PACKED
#endif
/* ETHER_TYPE_BRCM is defined in ethernet.h */
/*
* Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
* in one of two formats: (only subtypes 32768-65535 are in use now)
*
* subtypes 0-32767:
* 8 bit subtype (0-127)
* 8 bit length in bytes (0-255)
*
* subtypes 32768-65535:
* 16 bit big-endian subtype
* 16 bit big-endian length in bytes (0-65535)
*
* length is the number of additional bytes beyond the 4 or 6 byte header
*
* Reserved values:
* 0 reserved
* 5-15 reserved for iLine protocol assignments
* 17-126 reserved, assignable
* 127 reserved
* 32768 reserved
* 32769-65534 reserved, assignable
* 65535 reserved
*/
/*
* While adding the subtypes and their specific processing code make sure
* bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition
*/
#define BCMILCP_SUBTYPE_RATE 1
#define BCMILCP_SUBTYPE_LINK 2
#define BCMILCP_SUBTYPE_CSA 3
#define BCMILCP_SUBTYPE_LARQ 4
#define BCMILCP_SUBTYPE_VENDOR 5
#define BCMILCP_SUBTYPE_FLH 17
#define BCMILCP_SUBTYPE_VENDOR_LONG 32769
#define BCMILCP_SUBTYPE_CERT 32770
#define BCMILCP_SUBTYPE_SES 32771
#define BCMILCP_BCM_SUBTYPE_RESERVED 0
#define BCMILCP_BCM_SUBTYPE_EVENT 1
#define BCMILCP_BCM_SUBTYPE_SES 2
/*
* The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
* within BCMILCP_BCM_SUBTYPE_EVENT type messages
*/
/* #define BCMILCP_BCM_SUBTYPE_EAPOL 3 */
#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH 8
#define BCMILCP_BCM_SUBTYPEHDR_VERSION 0
/* These fields are stored in network order */
typedef struct bcmeth_hdr
{
uint16 subtype; /* Vendor specific..32769 */
uint16 length;
uint8 version; /* Version is 0 */
uint8 oui[3]; /* Broadcom OUI */
/* user specific Data */
uint16 usr_subtype;
} PACKED bcmeth_hdr_t;
#undef PACKED
#if !defined(__GNUC__)
#pragma pack()
#endif
#endif /* _BCMETH_H_ */

@ -1,166 +0,0 @@
/*
* Broadcom Event protocol definitions
*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
*
* Dependencies: proto/bcmeth.h
*
* $Id: bcmevent.h,v 1.1.1.11 2007/05/31 08:00:41 michael Exp $
*
*/
/*
* Broadcom Ethernet Events protocol defines
*
*/
#ifndef _BCMEVENT_H_
#define _BCMEVENT_H_
/* enable structure packing */
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#pragma pack(1)
#define PACKED
#endif /* defined(__GNUC__) */
#define BCM_EVENT_MSG_VERSION 1 /* wl_event_msg_t struct version */
#define BCM_MSG_IFNAME_MAX 16 /* max length of interface name */
/* flags */
#define WLC_EVENT_MSG_LINK 0x01 /* link is up */
#define WLC_EVENT_MSG_FLUSHTXQ 0x02 /* flush tx queue on MIC error */
#define WLC_EVENT_MSG_GROUP 0x04 /* group MIC error */
/* these fields are stored in network order */
typedef struct
{
uint16 version;
uint16 flags; /* see flags below */
uint32 event_type; /* Message (see below) */
uint32 status; /* Status code (see below) */
uint32 reason; /* Reason code (if applicable) */
uint32 auth_type; /* WLC_E_AUTH */
uint32 datalen; /* data buf */
struct ether_addr addr; /* Station address (if applicable) */
char ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
} PACKED wl_event_msg_t;
/* used by driver msgs */
typedef struct bcm_event {
struct ether_header eth;
bcmeth_hdr_t bcm_hdr;
wl_event_msg_t event;
/* data portion follows */
} PACKED bcm_event_t;
#define BCM_MSG_LEN (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
/* Event messages */
#define WLC_E_SET_SSID 0 /* indicates status of set SSID */
#define WLC_E_JOIN 1 /* differentiates join IBSS from found (WLC_E_START) IBSS */
#define WLC_E_START 2 /* STA founded an IBSS or AP started a BSS */
#define WLC_E_AUTH 3 /* 802.11 AUTH request */
#define WLC_E_AUTH_IND 4 /* 802.11 AUTH indication */
#define WLC_E_DEAUTH 5 /* 802.11 DEAUTH request */
#define WLC_E_DEAUTH_IND 6 /* 802.11 DEAUTH indication */
#define WLC_E_ASSOC 7 /* 802.11 ASSOC request */
#define WLC_E_ASSOC_IND 8 /* 802.11 ASSOC indication */
#define WLC_E_REASSOC 9 /* 802.11 REASSOC request */
#define WLC_E_REASSOC_IND 10 /* 802.11 REASSOC indication */
#define WLC_E_DISASSOC 11 /* 802.11 DISASSOC request */
#define WLC_E_DISASSOC_IND 12 /* 802.11 DISASSOC indication */
#define WLC_E_QUIET_START 13 /* 802.11h Quiet period started */
#define WLC_E_QUIET_END 14 /* 802.11h Quiet period ended */
#define WLC_E_BEACON_RX 15 /* BEACONS received/lost indication */
#define WLC_E_LINK 16 /* generic link indication */
#define WLC_E_MIC_ERROR 17 /* TKIP MIC error occurred */
#define WLC_E_NDIS_LINK 18 /* NDIS style link indication */
#define WLC_E_ROAM 19 /* roam attempt occurred: indicate status & reason */
#define WLC_E_TXFAIL 20 /* change in dot11FailedCount (txfail) */
#define WLC_E_PMKID_CACHE 21 /* WPA2 pmkid cache indication */
#define WLC_E_RETROGRADE_TSF 22 /* current AP's TSF value went backward */
#define WLC_E_PRUNE 23 /* AP was pruned from join list for reason */
#define WLC_E_AUTOAUTH 24 /* report AutoAuth table entry match for join attempt */
#define WLC_E_EAPOL_MSG 25 /* Event encapsulating an EAPOL message */
#define WLC_E_SCAN_COMPLETE 26 /* Scan results are ready or scan was aborted */
#define WLC_E_ADDTS_IND 27 /* indicate to host addts fail/success */
#define WLC_E_DELTS_IND 28 /* indicate to host delts fail/success */
#define WLC_E_BCNSENT_IND 29 /* indicate to host of beacon transmit */
#define WLC_E_BCNRX_MSG 30 /* Send the received beacon up to the host */
#define WLC_E_BCNLOST_MSG 31 /* indicate to host loss of beacon */
#define WLC_E_ROAM_PREP 32 /* before attempting to roam */
#define WLC_E_PFN_NET_FOUND 33 /* PFN network found event */
#define WLC_E_PFN_NET_LOST 34 /* PFN network lost event */
#ifdef EXT_STA
#define WLC_E_RESET_COMPLETE 35
#define WLC_E_JOIN_START 36
#define WLC_E_ROAM_START 37
#define WLC_E_ASSOC_START 38
#define WLC_E_IBSS_ASSOC 39
#define WLC_E_RADIO 40
#define WLC_E_LAST 41 /* highest val + 1 for range checking */
#else /* EXT_STA */
#define WLC_E_LAST 35 /* highest val + 1 for range checking */
#endif /* EXT_STA */
/* Event status codes */
#define WLC_E_STATUS_SUCCESS 0 /* operation was successful */
#define WLC_E_STATUS_FAIL 1 /* operation failed */
#define WLC_E_STATUS_TIMEOUT 2 /* operation timed out */
#define WLC_E_STATUS_NO_NETWORKS 3 /* failed due to no matching network found */
#define WLC_E_STATUS_ABORT 4 /* operation was aborted */
#define WLC_E_STATUS_NO_ACK 5 /* protocol failure: packet not ack'd */
#define WLC_E_STATUS_UNSOLICITED 6 /* AUTH or ASSOC packet was unsolicited */
#define WLC_E_STATUS_ATTEMPT 7 /* attempt to assoc to an auto auth configuration */
#define WLC_E_STATUS_PARTIAL 8 /* scan results are incomplete */
#define WLC_E_STATUS_NEWSCAN 9 /* scan aborted by another scan */
#define WLC_E_STATUS_NEWASSOC 10 /* scan aborted due to assoc in progress */
#define WLC_E_STATUS_11HQUIET 11 /* 802.11h quiet period started */
#define WLC_E_STATUS_SUPPRESS 12 /* user disabled scanning (WLC_SET_SCANSUPPRESS) */
#define WLC_E_STATUS_NOCHANS 13 /* no allowable channels to scan */
#define WLC_E_STATUS_CCXFASTRM 14 /* scan aborted due to CCX fast roam */
/* roam reason codes */
#define WLC_E_REASON_INITIAL_ASSOC 0 /* initial assoc */
#define WLC_E_REASON_LOW_RSSI 1 /* roamed due to low RSSI */
#define WLC_E_REASON_DEAUTH 2 /* roamed due to DEAUTH indication */
#define WLC_E_REASON_DISASSOC 3 /* roamed due to DISASSOC indication */
#define WLC_E_REASON_BCNS_LOST 4 /* roamed due to lost beacons */
#define WLC_E_REASON_FAST_ROAM_FAILED 5 /* roamed due to fast roam failure */
#define WLC_E_REASON_DIRECTED_ROAM 6 /* roamed due to request by AP */
#define WLC_E_REASON_TSPEC_REJECTED 7 /* roamed due to TSPEC rejection */
#define WLC_E_REASON_BETTER_AP 8 /* roamed due to finding better AP */
/* prune reason codes */
#define WLC_E_PRUNE_ENCR_MISMATCH 1 /* encryption mismatch */
#define WLC_E_PRUNE_BCAST_BSSID 2 /* AP uses a broadcast BSSID */
#define WLC_E_PRUNE_MAC_DENY 3 /* STA's MAC addr is in AP's MAC deny list */
#define WLC_E_PRUNE_MAC_NA 4 /* STA's MAC addr is not in AP's MAC allow list */
#define WLC_E_PRUNE_REG_PASSV 5 /* AP not allowed due to regulatory restriction */
#define WLC_E_PRUNE_SPCT_MGMT 6 /* AP does not support STA locale spectrum mgmt */
#define WLC_E_PRUNE_RADAR 7 /* AP is on a radar channel of STA locale */
#define WLC_E_RSN_MISMATCH 8 /* STA does not support AP's RSN */
#define WLC_E_PRUNE_NO_COMMON_RATES 9 /* No rates in common with AP */
#define WLC_E_PRUNE_BASIC_RATES 10 /* STA does not support all basic rates of BSS */
#define WLC_E_PRUNE_CIPHER_NA 12 /* BSS's cipher not supported */
#define WLC_E_PRUNE_KNOWN_STA 13 /* AP is already known to us as a STA */
#define WLC_E_PRUNE_WDS_PEER 15 /* AP is already known to us as a WDS peer */
#define WLC_E_PRUNE_QBSS_LOAD 16 /* QBSS LOAD - AAC is too low */
#define WLC_E_PRUNE_HOME_AP 17 /* prune home AP */
#undef PACKED
#if !defined(__GNUC__)
#pragma pack()
#endif /* PACKED */
#endif /* _BCMEVENT_H_ */

@ -1,48 +0,0 @@
/*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
* the contents of this file may not be disclosed to third parties, copied
* or duplicated in any form, in whole or in part, without the prior
* written permission of Broadcom Corporation.
*
* Fundamental constants relating to UDP Protocol
*
* $Id: bcmudp.h,v 1.1.1.1 2007/05/31 08:00:41 michael Exp $
*/
#ifndef _bcmudp_h_
#define _bcmudp_h_
/* enable structure packing */
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#pragma pack(1)
#define PACKED
#endif
/* UDP header */
#define UDP_DEST_PORT_OFFSET 2 /* UDP dest port offset */
#define UDP_LEN_OFFSET 4 /* UDP length offset */
#define UDP_CHKSUM_OFFSET 6 /* UDP body checksum offset */
#define UDP_HDR_LEN 8 /* UDP header length */
#define UDP_PORT_LEN 2 /* UDP port length */
/* These fields are stored in network order */
struct bcmudp_hdr
{
uint16 src_port; /* Source Port Address */
uint16 dst_port; /* Destination Port Address */
uint16 len; /* Number of bytes in datagram including header */
uint16 chksum; /* entire datagram checksum with pseudoheader */
} PACKED;
#undef PACKED
#if !defined(__GNUC__)
#pragma pack()
#endif
#endif /* #ifndef _bcmudp_h_ */

@ -1,45 +0,0 @@
/*
* Extensible Authentication Protocol (EAP) definitions
*
* See
* RFC 2284: PPP Extensible Authentication Protocol (EAP)
*
* Copyright (C) 2002 Broadcom Corporation
*
* $Id: eap.h,v 1.2 2007/04/17 08:52:47 yogo Exp $
*/
#ifndef _eap_h_
#define _eap_h_
/* EAP packet format */
typedef struct {
unsigned char code; /* EAP code */
unsigned char id; /* Current request ID */
unsigned short length; /* Length including header */
unsigned char type; /* EAP type (optional) */
unsigned char data[1]; /* Type data (optional) */
} eap_header_t;
#define EAP_HEADER_LEN 4
/* EAP codes */
#define EAP_REQUEST 1
#define EAP_RESPONSE 2
#define EAP_SUCCESS 3
#define EAP_FAILURE 4
/* EAP types */
#define EAP_IDENTITY 1
#define EAP_NOTIFICATION 2
#define EAP_NAK 3
#define EAP_MD5 4
#define EAP_OTP 5
#define EAP_GTC 6
#define EAP_TLS 13
#define EAP_EXPANDED 254
#define BCM_EAP_SES 10
#define BCM_EAP_EXP_LEN 12 /* EAP_LEN 5 + 3 bytes for SMI ID + 4 bytes for ven type */
#define BCM_SMI_ID 0x113d
#endif /* _eap_h_ */

@ -1,179 +0,0 @@
/*
* 802.1x EAPOL definitions
*
* See
* IEEE Std 802.1X-2001
* IEEE 802.1X RADIUS Usage Guidelines
*
* Copyright (C) 2002 Broadcom Corporation
*
* eapol.h,v 9.17 2004/12/13 22:36:09 davidm Exp
*/
#ifndef _eapol_h_
#define _eapol_h_
/* enable structure packing */
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#pragma pack(1)
#define PACKED
#endif
#include <bcmcrypto/aeskeywrap.h>
/* EAPOL for 802.3/Ethernet */
typedef struct {
struct ether_header eth; /* 802.3/Ethernet header */
unsigned char version; /* EAPOL protocol version */
unsigned char type; /* EAPOL type */
unsigned short length; /* Length of body */
unsigned char body[1]; /* Body (optional) */
} eapol_header_t;
#define EAPOL_HEADER_LEN 18
/* EAPOL version */
#define WPA2_EAPOL_VERSION 2
#define WPA_EAPOL_VERSION 1
#define LEAP_EAPOL_VERSION 1
#define SES_EAPOL_VERSION 1
/* EAPOL types */
#define EAP_PACKET 0
#define EAPOL_START 1
#define EAPOL_LOGOFF 2
#define EAPOL_KEY 3
#define EAPOL_ASF 4
/* EAPOL-Key types */
#define EAPOL_RC4_KEY 1
#ifdef BCMWPA2
#define EAPOL_WPA2_KEY 2 /* 802.11i/WPA2 */
#endif
#define EAPOL_WPA_KEY 254 /* WPA */
/* RC4 EAPOL-Key header field sizes */
#define EAPOL_KEY_REPLAY_LEN 8
#define EAPOL_KEY_IV_LEN 16
#define EAPOL_KEY_SIG_LEN 16
/* RC4 EAPOL-Key */
typedef struct {
unsigned char type; /* Key Descriptor Type */
unsigned short length; /* Key Length (unaligned) */
unsigned char replay[EAPOL_KEY_REPLAY_LEN]; /* Replay Counter */
unsigned char iv[EAPOL_KEY_IV_LEN]; /* Key IV */
unsigned char index; /* Key Flags & Index */
unsigned char signature[EAPOL_KEY_SIG_LEN]; /* Key Signature */
unsigned char key[1]; /* Key (optional) */
} PACKED eapol_key_header_t;
#define EAPOL_KEY_HEADER_LEN 44
/* RC4 EAPOL-Key flags */
#define EAPOL_KEY_FLAGS_MASK 0x80
#define EAPOL_KEY_BROADCAST 0
#define EAPOL_KEY_UNICAST 0x80
/* RC4 EAPOL-Key index */
#define EAPOL_KEY_INDEX_MASK 0x7f
/* WPA/802.11i/WPA2 EAPOL-Key header field sizes */
#define EAPOL_WPA_KEY_REPLAY_LEN 8
#define EAPOL_WPA_KEY_NONCE_LEN 32
#define EAPOL_WPA_KEY_IV_LEN 16
#define EAPOL_WPA_KEY_RSC_LEN 8
#define EAPOL_WPA_KEY_ID_LEN 8
#define EAPOL_WPA_KEY_MIC_LEN 16
#define EAPOL_WPA_KEY_DATA_LEN (EAPOL_WPA_MAX_KEY_SIZE + AKW_BLOCK_LEN)
#define EAPOL_WPA_MAX_KEY_SIZE 32
/* WPA EAPOL-Key */
typedef struct {
unsigned char type; /* Key Descriptor Type */
unsigned short key_info; /* Key Information (unaligned) */
unsigned short key_len; /* Key Length (unaligned) */
unsigned char replay[EAPOL_WPA_KEY_REPLAY_LEN]; /* Replay Counter */
unsigned char nonce[EAPOL_WPA_KEY_NONCE_LEN]; /* Nonce */
unsigned char iv[EAPOL_WPA_KEY_IV_LEN]; /* Key IV */
unsigned char rsc[EAPOL_WPA_KEY_RSC_LEN]; /* Key RSC */
unsigned char id[EAPOL_WPA_KEY_ID_LEN]; /* WPA:Key ID, 802.11i/WPA2: Reserved */
unsigned char mic[EAPOL_WPA_KEY_MIC_LEN]; /* Key MIC */
unsigned short data_len; /* Key Data Length */
unsigned char data[EAPOL_WPA_KEY_DATA_LEN]; /* Key data */
} PACKED eapol_wpa_key_header_t;
#define EAPOL_WPA_KEY_LEN 95
/* WPA/802.11i/WPA2 KEY KEY_INFO bits */
#define WPA_KEY_DESC_V1 0x01
#define WPA_KEY_DESC_V2 0x02
#define WPA_KEY_PAIRWISE 0x08
#define WPA_KEY_INSTALL 0x40
#define WPA_KEY_ACK 0x80
#define WPA_KEY_MIC 0x100
#define WPA_KEY_SECURE 0x200
#define WPA_KEY_ERROR 0x400
#define WPA_KEY_REQ 0x800
/* WPA-only KEY KEY_INFO bits */
#define WPA_KEY_INDEX_0 0x00
#define WPA_KEY_INDEX_1 0x10
#define WPA_KEY_INDEX_2 0x20
#define WPA_KEY_INDEX_3 0x30
#define WPA_KEY_INDEX_MASK 0x30
#define WPA_KEY_INDEX_SHIFT 0x04
#ifdef BCMWPA2
/* 802.11i/WPA2-only KEY KEY_INFO bits */
#define WPA_KEY_ENCRYPTED_DATA 0x1000
/* Key Data encapsulation */
typedef struct {
uint8 type;
uint8 length;
uint8 oui[3];
uint8 subtype;
uint8 data[1];
} PACKED eapol_wpa2_encap_data_t;
#define EAPOL_WPA2_ENCAP_DATA_HDR_LEN 6
#define WPA2_KEY_DATA_SUBTYPE_GTK 1
#define WPA2_KEY_DATA_SUBTYPE_STAKEY 2
#define WPA2_KEY_DATA_SUBTYPE_MAC 3
#define WPA2_KEY_DATA_SUBTYPE_PMKID 4
/* GTK encapsulation */
typedef struct {
uint8 flags;
uint8 reserved;
uint8 gtk[EAPOL_WPA_MAX_KEY_SIZE];
} PACKED eapol_wpa2_key_gtk_encap_t;
#define EAPOL_WPA2_KEY_GTK_ENCAP_HDR_LEN 2
#define WPA2_GTK_INDEX_MASK 0x03
#define WPA2_GTK_INDEX_SHIFT 0x00
#define WPA2_GTK_TRANSMIT 0x04
/* STAKey encapsulation */
typedef struct {
uint8 reserved[2];
uint8 mac[ETHER_ADDR_LEN];
uint8 stakey[EAPOL_WPA_MAX_KEY_SIZE];
} PACKED eapol_wpa2_key_stakey_encap_t;
#define WPA2_KEY_DATA_PAD 0xdd
#endif /* BCMWPA2 */
#undef PACKED
#if !defined(__GNUC__)
#pragma pack()
#endif
#endif /* _eapol_h_ */

@ -1,158 +0,0 @@
/*
* Fundamental types and constants relating to WPA
*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id: wpa.h,v 1.1.1.6 2007/05/31 08:00:41 michael Exp $
*/
#ifndef _proto_wpa_h_
#define _proto_wpa_h_
#include <typedefs.h>
#include <proto/ethernet.h>
/* enable structure packing */
#if defined(__GNUC__)
#define PACKED __attribute__((packed))
#else
#pragma pack(1)
#define PACKED
#endif
/* Reason Codes */
/* 13 through 23 taken from IEEE Std 802.11i-2004 */
#define DOT11_RC_INVALID_WPA_IE 13 /* Invalid info. element */
#define DOT11_RC_MIC_FAILURE 14 /* Michael failure */
#define DOT11_RC_4WH_TIMEOUT 15 /* 4-way handshake timeout */
#define DOT11_RC_GTK_UPDATE_TIMEOUT 16 /* Group key update timeout */
#define DOT11_RC_WPA_IE_MISMATCH 17 /* WPA IE in 4-way handshake differs from
* (re-)assoc. request/probe response
*/
#define DOT11_RC_INVALID_MC_CIPHER 18 /* Invalid multicast cipher */
#define DOT11_RC_INVALID_UC_CIPHER 19 /* Invalid unicast cipher */
#define DOT11_RC_INVALID_AKMP 20 /* Invalid authenticated key management protocol */
#define DOT11_RC_BAD_WPA_VERSION 21 /* Unsupported WPA version */
#define DOT11_RC_INVALID_WPA_CAP 22 /* Invalid WPA IE capabilities */
#define DOT11_RC_8021X_AUTH_FAIL 23 /* 802.1X authentication failure */
#define WPA2_PMKID_LEN 16
/* WPA IE fixed portion */
typedef struct
{
uint8 tag; /* TAG */
uint8 length; /* TAG length */
uint8 oui[3]; /* IE OUI */
uint8 oui_type; /* OUI type */
struct {
uint8 low;
uint8 high;
} PACKED version; /* IE version */
} PACKED wpa_ie_fixed_t;
#define WPA_IE_OUITYPE_LEN 4
#define WPA_IE_FIXED_LEN 8
#define WPA_IE_TAG_FIXED_LEN 6
#ifdef BCMWPA2
typedef struct {
uint8 tag; /* TAG */
uint8 length; /* TAG length */
struct {
uint8 low;
uint8 high;
} PACKED version; /* IE version */
} PACKED wpa_rsn_ie_fixed_t;
#define WPA_RSN_IE_FIXED_LEN 4
#define WPA_RSN_IE_TAG_FIXED_LEN 2
typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
#endif
/* WPA suite/multicast suite */
typedef struct
{
uint8 oui[3];
uint8 type;
} PACKED wpa_suite_t, wpa_suite_mcast_t;
#define WPA_SUITE_LEN 4
/* WPA unicast suite list/key management suite list */
typedef struct
{
struct {
uint8 low;
uint8 high;
} PACKED count;
wpa_suite_t list[1];
} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
#define WPA_IE_SUITE_COUNT_LEN 2
#ifdef BCMWPA2
typedef struct
{
struct {
uint8 low;
uint8 high;
} PACKED count;
wpa_pmkid_t list[1];
} PACKED wpa_pmkid_list_t;
#endif
/* WPA cipher suites */
#define WPA_CIPHER_NONE 0 /* None */
#define WPA_CIPHER_WEP_40 1 /* WEP (40-bit) */
#define WPA_CIPHER_TKIP 2 /* TKIP: default for WPA */
#define WPA_CIPHER_AES_OCB 3 /* AES (OCB) */
#define WPA_CIPHER_AES_CCM 4 /* AES (CCM) */
#define WPA_CIPHER_WEP_104 5 /* WEP (104-bit) */
#define IS_WPA_CIPHER(cipher) ((cipher) == WPA_CIPHER_NONE || \
(cipher) == WPA_CIPHER_WEP_40 || \
(cipher) == WPA_CIPHER_WEP_104 || \
(cipher) == WPA_CIPHER_TKIP || \
(cipher) == WPA_CIPHER_AES_OCB || \
(cipher) == WPA_CIPHER_AES_CCM)
/* WPA TKIP countermeasures parameters */
#define WPA_TKIP_CM_DETECT 60 /* multiple MIC failure window (seconds) */
#define WPA_TKIP_CM_BLOCK 60 /* countermeasures active window (seconds) */
/* RSN IE defines */
#define RSN_CAP_LEN 2 /* Length of RSN capabilities field (2 octets) */
/* RSN Capabilities defined in 802.11i */
#define RSN_CAP_PREAUTH 0x0001
#define RSN_CAP_NOPAIRWISE 0x0002
#define RSN_CAP_PTK_REPLAY_CNTR_MASK 0x000C
#define RSN_CAP_PTK_REPLAY_CNTR_SHIFT 2
#define RSN_CAP_GTK_REPLAY_CNTR_MASK 0x0030
#define RSN_CAP_GTK_REPLAY_CNTR_SHIFT 4
#define RSN_CAP_1_REPLAY_CNTR 0
#define RSN_CAP_2_REPLAY_CNTRS 1
#define RSN_CAP_4_REPLAY_CNTRS 2
#define RSN_CAP_16_REPLAY_CNTRS 3
/* WPA capabilities defined in 802.11i */
#define WPA_CAP_4_REPLAY_CNTRS RSN_CAP_4_REPLAY_CNTRS
#define WPA_CAP_16_REPLAY_CNTRS RSN_CAP_16_REPLAY_CNTRS
#define WPA_CAP_REPLAY_CNTR_SHIFT RSN_CAP_PTK_REPLAY_CNTR_SHIFT
#define WPA_CAP_REPLAY_CNTR_MASK RSN_CAP_PTK_REPLAY_CNTR_MASK
/* WPA Specific defines */
#define WPA_CAP_LEN RSN_CAP_LEN /* Length of RSN capabilities in RSN IE (2 octets) */
#define WPA_CAP_WPA2_PREAUTH RSN_CAP_PREAUTH
#undef PACKED
#if !defined(__GNUC__)
#pragma pack()
#endif
#endif /* _proto_wpa_h_ */
Loading…
Cancel
Save