ath79: WNR612v2: improve device support

This patch improves ath79 support for Netgear WNR612v2.
Router functionality becomes identical to ar71xx version.

Changes include:
* software control over LAN LEDs via sysfs
* correct MAC addresses for network interfaces
* correct image size in device definition
* dts: 'keys' renamed to 'ath9k-keys'
* dts: 'label-mac-device' set to eth1 (LAN)
* dts: formatting adjustments

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts

@@ -4,6 +4,6 @@
 #include "ar7240_netgear_wnr612-v2.dtsi"
 
 / {
-	model = "Netgear WNR612 v2";
 	compatible = "netgear,wnr612-v2", "qca,ar7240";
+	model = "Netgear WNR612 v2";
 };

target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi

@@ -12,9 +12,10 @@
 		led-failsafe = &power;
 		led-running = &power;
 		led-upgrade = &power;
+		label-mac-device = &eth1;
 	};
 
-	keys {
+	ath9k-keys {
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
 
@@ -28,6 +29,10 @@
 
 	leds {
 		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
+
 		power: power {
 			label = "netgear:green:power";
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
@@ -47,6 +52,10 @@
 			label = "netgear:green:wan";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	ath9k-leds {
+		compatible = "gpio-leds";
 
 		wlan: wlan {
 			label = "netgear:green:wlan";
@@ -70,7 +79,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			uboot: partition@0 {
+			partition@0 {
 				reg = <0x0 0x40000>;
 				label = "u-boot";
 				read-only;
@@ -87,7 +96,7 @@
 				label = "firmware";
 			};
 
-			partition@3f0000 {
+			art: partition@3f0000 {
 				reg = <0x3f0000 0x10000>;
 				label = "art";
 				read-only;
@@ -99,15 +108,13 @@
 &eth0 {
 	status = "okay";
 
-	mtd-mac-address = <&uboot 0x1fc00>;
-	mtd-mac-address-increment = <(-1)>;
+	mtd-mac-address = <&art 0x0>;
 };
 
 &eth1 {
 	status = "okay";
 
-	mtd-mac-address = <&uboot 0x1fc00>;
-	mtd-mac-address-increment = <1>;
+	mtd-mac-address = <&art 0x6>;
 };
 
 &pcie {
@@ -116,6 +123,8 @@
 	ath9k: wifi@0,0 {
 		compatible = "pci168c,002b";
 		reg = <0x0000 0 0 0 0>;
+		mtd-mac-address = <&art 0x0>;
+		mtd-mac-address-increment = <1>;
 		qca,no-eeprom;
 		#gpio-cells = <2>;
 		gpio-controller;

target/linux/ath79/dts/ar7240_on_n150r.dts

@@ -4,6 +4,6 @@
 #include "ar7240_netgear_wnr612-v2.dtsi"
 
 / {
-	model = "ON Network N150R";
 	compatible = "on,n150r", "qca,ar7240";
+	model = "ON Network N150R";
 };

target/linux/ath79/image/tiny-netgear.mk

@@ -4,7 +4,7 @@ define Device/netgear_ar7240
   ATH_SOC := ar7240
   NETGEAR_KERNEL_MAGIC := 0x32303631
   KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
-  IMAGE_SIZE := 3904k
+  IMAGE_SIZE := 3712k
   IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
   $(Device/netgear_ath79)
 endef