Browse Source

ramips: mt7620/mt7621: remove invalid mediatek,portmap

mt7620 and mt7621 use mt7530 driver, which only accepts "llllw", "wllll",
and "lwlll" values.

According to its switch setup, Mi Router 3G v2 has a WAN port at port 4,
so the correct value should be "llllw".

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
master
Sungbo Eo 3 years ago
committed by Adrian Schmutzler
parent
commit
d3c0a94405
  1. 1
      target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi
  2. 5
      target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts
  3. 2
      target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts

1
target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi

@ -122,7 +122,6 @@
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>;
mediatek,portmap = "l";
mediatek,mdio-mode = <1>;
phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;

5
target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts

@ -169,9 +169,8 @@
};
&ethernet {
mtd-mac-address = <&rom 0xf100>;
mediatek,portmap = "llll";
};
mtd-mac-address = <&rom 0xf100>;
};
&ehci {
status = "okay";

2
target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts

@ -134,7 +134,7 @@
&ethernet {
mtd-mac-address = <&factory 0xe000>;
mediatek,portmap = "lllwl";
mediatek,portmap = "llllw";
};
&state_default {

Loading…
Cancel
Save