ar71xx: create wndr3700 network config from uci-defaults
Since that was the last configuration in defconfig directory we can drop the defconfig init script too. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39373v19.07.3_mercusys_ac12_duma
Luka Perkov
10 years ago
parent
d66d2ad104
commit
cbc892a549
@ -1,77 +0,0 @@
|
||||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface lan
|
||||
option ifname eth0.1
|
||||
option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.1.1
|
||||
option netmask 255.255.255.0
|
||||
option ip6assign 60
|
||||
|
||||
config interface wan
|
||||
option ifname eth1
|
||||
option proto dhcp
|
||||
|
||||
config interface wan6
|
||||
option ifname @wan
|
||||
option proto dhcpv6
|
||||
|
||||
config globals globals
|
||||
option ula_prefix auto
|
||||
|
||||
config switch
|
||||
option name rtl8366s
|
||||
option reset 1
|
||||
option enable_vlan 1
|
||||
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
|
||||
option blinkrate 2
|
||||
|
||||
config switch_vlan
|
||||
option device rtl8366s
|
||||
option vlan 1
|
||||
option ports "0 1 2 3 5t"
|
||||
|
||||
config switch_port
|
||||
# Port 1 controls the GREEN configuration of LEDs for
|
||||
# the switch and the section does not correspond to a real
|
||||
# switch port.
|
||||
#
|
||||
# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
|
||||
# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
|
||||
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
|
||||
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
|
||||
# 14: Link (master); 15: separate register
|
||||
|
||||
option device rtl8366s
|
||||
option port 1
|
||||
option led 6
|
||||
|
||||
config switch_port
|
||||
# Port 2 controls the ORANGE configuration of LEDs for
|
||||
# the switch and the section does not correspond to a real
|
||||
# switch port.
|
||||
#
|
||||
# See the key above for switch port 1 for the meaning of the
|
||||
# 'led' setting below.
|
||||
|
||||
option device rtl8366s
|
||||
option port 2
|
||||
option led 9
|
||||
|
||||
config switch_port
|
||||
# Port 5 controls the configuration of the WAN LED and the
|
||||
# section does not correspond to a real switch port.
|
||||
#
|
||||
# To toggle the use of green or orange LEDs for the WAN port,
|
||||
# see the LED setting for wndr3700:green:wan in /etc/config/system.
|
||||
#
|
||||
# See the key above for switch port 1 for the meaning of the
|
||||
# 'led' setting below.
|
||||
|
||||
option device rtl8366s
|
||||
option port 5
|
||||
option led 2
|
||||
@ -1,20 +0,0 @@
|
||||
#!/bin/sh /etc/rc.common
|
||||
#
|
||||
# Copyright (C) 2009 OpenWrt.org
|
||||
#
|
||||
|
||||
START=05
|
||||
|
||||
start() {
|
||||
. /lib/ar71xx.sh
|
||||
|
||||
local board=$(ar71xx_board_name)
|
||||
|
||||
[ ! -d /etc/defconfig/$board ] && return 0
|
||||
|
||||
for f in $( ls /etc/defconfig/$board ); do
|
||||
if [ ! -e /etc/config/$f ]; then
|
||||
cp /etc/defconfig/$board/$f /etc/config/
|
||||
fi
|
||||
done
|
||||
}
|
||||
Loading…
Reference in New Issue