ar71xx: add board support for ubnt loco m xw

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42549

target/linux/ar71xx/base-files/etc/diag.sh

@@ -34,7 +34,7 @@ get_status_led() {
 	aw-nr580)
 		status_led="aw-nr580:green:ready"
 		;;
-	bullet-m | rocket-m | nano-m | nanostation-m | nanostation-m-xw)
+	bullet-m | rocket-m | nano-m | nanostation-m | nanostation-m-xw | loco-m-xw)
 		status_led="ubnt:green:link4"
 		;;
 	bxu2000n-2-a1)

target/linux/ar71xx/base-files/etc/uci-defaults/01_leds

@@ -38,7 +38,8 @@ ap113)
 bullet-m | \
 nanostation-m | \
 rocket-m | \
-nanostation-m-xw)
+nanostation-m-xw | \
+loco-m-xw)
 	ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" "0" "13"
 	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100" "-25" "13"
 	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100" "-50" "13"

target/linux/ar71xx/base-files/etc/uci-defaults/02_network

@@ -286,6 +286,7 @@ bullet-m |\
 cap4200ag |\
 eap300v2 |\
 eap7660d |\
+loco-m-xw |\
 mr600 |\
 mr600v2 |\
 rb-411 |\

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -352,6 +352,9 @@ ar71xx_board_detect() {
 	*"Bullet M")
 		name="bullet-m"
 		;;
+	*"Loco M XW")
+		name="loco-m-xw"
+		;;
 	*"Nanostation M")
 		name="nanostation-m"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -190,6 +190,7 @@ platform_check_image() {
 	airgateway | \
 	airrouter | \
 	bullet-m | \
+	loco-m-xw | \
 	nanostation-m | \
 	rocket-m | \
 	nanostation-m-xw | \

target/linux/ar71xx/image/Makefile

@@ -1246,6 +1246,7 @@ $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOM,ubnt-nano-m,UBNT-NM,ttyS0,11
 $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFI,ubnt-unifi,UBNT-UF,ttyS0,115200,XM,BZ,ar7240))
 $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTUNIFIOUTDOOR,ubnt-unifi-outdoor,UBNT-U20,ttyS0,115200,XM,BZ,ar7240))
 $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTNANOMXW,ubnt-nano-m-xw,UBNT-NM-XW,ttyS0,115200,XM,XW,ar934x))
+$(eval $(call SingleProfile,UBNTXM,64kraw,UBNTLOCOXW,ubnt-loco-m-xw,UBNT-LOCO-XW,ttyS0,115200,XM,XW,ar934x))
 $(eval $(call SingleProfile,UBNTXM,64kraw,UBNTAIRGW,ubnt-air-gateway,UBNT-AGW,ttyATH0,115200,XM,AirGW,ar933x))
 
 $(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
@@ -1291,7 +1292,7 @@ $(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4 TLWR941NV6))
 $(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
 $(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
 $(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
-$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO UBNTAIRGW))
+$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO UBNTAIRGW))
 $(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800 WNDR3800CH WNDRMAC WNDRMACV2))
 $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
 $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))

target/linux/ar71xx/patches-3.10/616-MIPS-ath79-ubnt-xw.patch

@@ -1,8 +1,6 @@
-Index: linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c
-===================================================================
---- linux-3.10.49.orig/arch/mips/ath79/mach-ubnt-xm.c	2014-08-15 22:55:37.890080659 +0200
-+++ linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c	2014-08-15 22:58:31.061570912 +0200
-@@ -332,3 +332,67 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo
  MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
  	     ubnt_uap_pro_setup);
  
@@ -67,15 +65,27 @@ Index: linux-3.10.49/arch/mips/ath79/mach-ubnt-xm.c
 +	ath79_register_eth(0);
 +}
 +
++static void __init ubnt_loco_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	ath79_register_mdio(0, ~BIT(1));
++	ath79_eth0_data.phy_mask = BIT(1);
++	ath79_register_eth(0);
++}
++
 +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
 +	     ubnt_nano_m_xw_setup);
 +
++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
++	     ubnt_loco_m_xw_setup);
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -121,9 +121,10 @@ enum ath79_mach_type {
+@@ -121,9 +121,11 @@ enum ath79_mach_type {
  	ATH79_MACH_TL_WR941ND,		/* TP-LINK TL-WR941ND */
  	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
  	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
++	ATH79_MACH_UBNT_LOCO_M_XW, 	/* Ubiquiti Loco M XW */
  	ATH79_MACH_UBNT_LSSR71,		/* Ubiquiti LS-SR71 */
  	ATH79_MACH_UBNT_LSX,		/* Ubiquiti LSX */
  	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */

target/linux/ar71xx/patches-3.10/722-MIPS-ath79-add-airGateway-support.patch

@@ -12,10 +12,10 @@
  #include "dev-ap9x-pci.h"
  #include "dev-eth.h"
  #include "dev-gpio-buttons.h"
-@@ -389,3 +391,65 @@ static void __init ubnt_nano_m_xw_setup(
+@@ -406,3 +408,65 @@ MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW,
  
- MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
- 	     ubnt_nano_m_xw_setup);
+ MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
+ 	     ubnt_loco_m_xw_setup);
 +
 +static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
 +	{
@@ -87,4 +87,4 @@
 +	ATH79_MACH_UBNT_AIRGW,		/* Ubiquiti AirGateway */
  	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
  	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
- 	ATH79_MACH_UBNT_LSSR71,		/* Ubiquiti LS-SR71 */
+ 	ATH79_MACH_UBNT_LOCO_M_XW, 	/* Ubiquiti Loco M XW */