diff --git a/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch b/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch new file mode 100644 index 0000000000..4fd49691a1 --- /dev/null +++ b/package/mac80211/patches/403-ath9k-introduce-bus-specific-cache-size-routine.patch @@ -0,0 +1,85 @@ +From 1306e6b6d72b2bc0b91bcdd15b1d982965210bda Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Mon, 5 Jan 2009 10:57:42 +0100 +Subject: [PATCH 03/11] ath9k: introduce bus specific cache size routine + +The PCI specific bus_read_cachesize routine won't work on the AHB bus, +we have to replace it with a suitable one later. + +Signed-off-by: Gabor Juhos +Signed-off-by: Imre Kaloz +--- + drivers/net/wireless/ath9k/core.h | 10 ++++++++++ + drivers/net/wireless/ath9k/main.c | 9 +++++++-- + 2 files changed, 17 insertions(+), 2 deletions(-) + +--- a/drivers/net/wireless/ath9k/core.h ++++ b/drivers/net/wireless/ath9k/core.h +@@ -693,6 +693,10 @@ enum PROT_MODE { + #define SC_OP_RFKILL_SW_BLOCKED BIT(12) + #define SC_OP_RFKILL_HW_BLOCKED BIT(13) + ++struct ath_bus_ops { ++ void (*read_cachesize)(struct ath_softc *sc, int *csz); ++}; ++ + struct ath_softc { + struct ieee80211_hw *hw; + struct device *dev; +@@ -743,6 +747,7 @@ struct ath_softc { + #ifdef CONFIG_ATH9K_DEBUG + struct ath9k_debug sc_debug; + #endif ++ struct ath_bus_ops *bus_ops; + }; + + int ath_reset(struct ath_softc *sc, bool retry_tx); +@@ -750,4 +755,9 @@ int ath_get_hal_qnum(u16 queue, struct a + int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc); + int ath_cabq_update(struct ath_softc *); + ++static inline void ath_read_cachesize(struct ath_softc *sc, int *csz) ++{ ++ sc->bus_ops->read_cachesize(sc, csz); ++} ++ + #endif /* CORE_H */ +--- a/drivers/net/wireless/ath9k/main.c ++++ b/drivers/net/wireless/ath9k/main.c +@@ -42,7 +42,7 @@ static void ath_detach(struct ath_softc + + /* return bus cachesize in 4B word units */ + +-static void bus_read_cachesize(struct ath_softc *sc, int *csz) ++static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz) + { + u8 u8tmp; + +@@ -1338,7 +1338,7 @@ static int ath_init(u16 devid, struct at + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ +- bus_read_cachesize(sc, &csz); ++ ath_read_cachesize(sc, &csz); + /* XXX assert csz is non-zero */ + sc->sc_cachelsz = csz << 2; /* convert to bytes */ + +@@ -2529,6 +2529,10 @@ ath_rf_name(u16 rf_version) + return "????"; + } + ++static struct ath_bus_ops ath_pci_bus_ops = { ++ .read_cachesize = ath_pci_read_cachesize, ++}; ++ + static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) + { + void __iomem *mem; +@@ -2617,6 +2621,7 @@ static int ath_pci_probe(struct pci_dev + sc->hw = hw; + sc->dev = &pdev->dev; + sc->mem = mem; ++ sc->bus_ops = &ath_pci_bus_ops; + + if (ath_attach(id->device, sc) != 0) { + ret = -ENODEV; diff --git a/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch b/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch new file mode 100644 index 0000000000..d1b2f3c1f9 --- /dev/null +++ b/package/mac80211/patches/404-ath9k-introduce-bus-specific-cleanup-routine.patch @@ -0,0 +1,90 @@ +From 4167fb37cceda6a5ebfbfc4431abc69a1857ce43 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Mon, 5 Jan 2009 10:59:29 +0100 +Subject: [PATCH 04/11] ath9k: introduce bus specific cleanup routine + +We have left only some PCI specific cleanup code. We have to convert +them as well. + +Signed-off-by: Gabor Juhos +Signed-off-by: Imre Kaloz +--- + drivers/net/wireless/ath9k/core.h | 6 ++++++ + drivers/net/wireless/ath9k/main.c | 30 ++++++++++++++++-------------- + 2 files changed, 22 insertions(+), 14 deletions(-) + +--- a/drivers/net/wireless/ath9k/core.h ++++ b/drivers/net/wireless/ath9k/core.h +@@ -695,6 +695,7 @@ enum PROT_MODE { + + struct ath_bus_ops { + void (*read_cachesize)(struct ath_softc *sc, int *csz); ++ void (*cleanup)(struct ath_softc *sc); + }; + + struct ath_softc { +@@ -760,4 +761,9 @@ static inline void ath_read_cachesize(st + sc->bus_ops->read_cachesize(sc, csz); + } + ++static inline void ath_bus_cleanup(struct ath_softc *sc) ++{ ++ sc->bus_ops->cleanup(sc); ++} ++ + #endif /* CORE_H */ +--- a/drivers/net/wireless/ath9k/main.c ++++ b/drivers/net/wireless/ath9k/main.c +@@ -1267,13 +1267,7 @@ static int ath_start_rfkill_poll(struct + rfkill_free(sc->rf_kill.rfkill); + + /* Deinitialize the device */ +- ath_detach(sc); +- if (to_pci_dev(sc->dev)->irq) +- free_irq(to_pci_dev(sc->dev)->irq, sc); +- pci_iounmap(to_pci_dev(sc->dev), sc->mem); +- pci_release_region(to_pci_dev(sc->dev), 0); +- pci_disable_device(to_pci_dev(sc->dev)); +- ieee80211_free_hw(sc->hw); ++ ath_bus_cleanup(sc); + return -EIO; + } else { + sc->sc_flags |= SC_OP_RFKILL_REGISTERED; +@@ -2529,8 +2523,22 @@ ath_rf_name(u16 rf_version) + return "????"; + } + ++static void ath_pci_cleanup(struct ath_softc *sc) ++{ ++ struct pci_dev *pdev = to_pci_dev(sc->dev); ++ ++ ath_detach(sc); ++ if (pdev->irq) ++ free_irq(pdev->irq, sc); ++ pci_iounmap(pdev, sc->mem); ++ pci_release_region(pdev, 0); ++ pci_disable_device(pdev); ++ ieee80211_free_hw(sc->hw); ++} ++ + static struct ath_bus_ops ath_pci_bus_ops = { + .read_cachesize = ath_pci_read_cachesize, ++ .cleanup = ath_pci_cleanup, + }; + + static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +@@ -2667,13 +2675,7 @@ static void ath_pci_remove(struct pci_de + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + +- ath_detach(sc); +- if (pdev->irq) +- free_irq(pdev->irq, sc); +- pci_iounmap(pdev, sc->mem); +- pci_release_region(pdev, 0); +- pci_disable_device(pdev); +- ieee80211_free_hw(hw); ++ ath_pci_cleanup(sc); + } + + #ifdef CONFIG_PM diff --git a/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch b/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch new file mode 100644 index 0000000000..0cdf4daf54 --- /dev/null +++ b/package/mac80211/patches/405-ath9k-move-PCI-code-into-separate-file.patch @@ -0,0 +1,725 @@ +From d95e670cd1395ffd8410bed809b6d060f2183d6b Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Mon, 5 Jan 2009 11:01:09 +0100 +Subject: [PATCH 05/11] ath9k: move PCI code into separate file + +Now that we have converted all bus specific routines to replaceable, we +can move the PCI specific codes into a separate file. + +Signed-off-by: Gabor Juhos +Signed-off-by: Imre Kaloz +--- + drivers/net/wireless/ath9k/Makefile | 1 + + drivers/net/wireless/ath9k/core.h | 18 ++- + drivers/net/wireless/ath9k/main.c | 299 +++-------------------------------- + drivers/net/wireless/ath9k/pci.c | 289 +++++++++++++++++++++++++++++++++ + 4 files changed, 328 insertions(+), 279 deletions(-) + +--- a/drivers/net/wireless/ath9k/Makefile ++++ b/drivers/net/wireless/ath9k/Makefile +@@ -11,6 +11,7 @@ ath9k-y += hw.o \ + xmit.o \ + rc.o + ++ath9k-$(CONFIG_PCI) += pci.o + ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o + + obj-$(CONFIG_ATH9K) += ath9k.o +--- a/drivers/net/wireless/ath9k/core.h ++++ b/drivers/net/wireless/ath9k/core.h +@@ -18,7 +18,7 @@ + #define CORE_H + + #include +-#include ++#include + #include + #include + #include +@@ -766,4 +766,20 @@ static inline void ath_bus_cleanup(struc + sc->bus_ops->cleanup(sc); + } + ++extern struct ieee80211_ops ath9k_ops; ++ ++irqreturn_t ath_isr(int irq, void *dev); ++int ath_attach(u16 devid, struct ath_softc *sc); ++void ath_detach(struct ath_softc *sc); ++const char *ath_mac_bb_name(u32 mac_bb_version); ++const char *ath_rf_name(u16 rf_version); ++ ++#ifdef CONFIG_PCI ++int ath_pci_init(void); ++void ath_pci_exit(void); ++#else ++static inline int ath_pci_init(void) { return 0; }; ++static inline void ath_pci_exit(void) {}; ++#endif ++ + #endif /* CORE_H */ +--- a/drivers/net/wireless/ath9k/main.c ++++ b/drivers/net/wireless/ath9k/main.c +@@ -28,38 +28,6 @@ MODULE_DESCRIPTION("Support for Atheros + MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards"); + MODULE_LICENSE("Dual BSD/GPL"); + +-static struct pci_device_id ath_pci_id_table[] __devinitdata = { +- { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */ +- { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */ +- { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ +- { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ +- { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ +- { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */ +- { 0 } +-}; +- +-static void ath_detach(struct ath_softc *sc); +- +-/* return bus cachesize in 4B word units */ +- +-static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz) +-{ +- u8 u8tmp; +- +- pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, +- (u8 *)&u8tmp); +- *csz = (int)u8tmp; +- +- /* +- * This check was put in to avoid "unplesant" consequences if +- * the bootrom has not fully initialized all PCI devices. +- * Sometimes the cache line size register is not set +- */ +- +- if (*csz == 0) +- *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ +-} +- + static void ath_cache_conf_rate(struct ath_softc *sc, + struct ieee80211_conf *conf) + { +@@ -497,7 +465,7 @@ static void ath9k_tasklet(unsigned long + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); + } + +-static irqreturn_t ath_isr(int irq, void *dev) ++irqreturn_t ath_isr(int irq, void *dev) + { + struct ath_softc *sc = dev; + struct ath_hal *ah = sc->sc_ah; +@@ -1278,7 +1246,7 @@ static int ath_start_rfkill_poll(struct + } + #endif /* CONFIG_RFKILL */ + +-static void ath_detach(struct ath_softc *sc) ++void ath_detach(struct ath_softc *sc) + { + struct ieee80211_hw *hw = sc->hw; + int i = 0; +@@ -1529,7 +1497,7 @@ bad: + return error; + } + +-static int ath_attach(u16 devid, struct ath_softc *sc) ++int ath_attach(u16 devid, struct ath_softc *sc) + { + struct ieee80211_hw *hw = sc->hw; + int error = 0; +@@ -2448,7 +2416,7 @@ static int ath9k_ampdu_action(struct iee + return ret; + } + +-static struct ieee80211_ops ath9k_ops = { ++struct ieee80211_ops ath9k_ops = { + .tx = ath9k_tx, + .start = ath9k_start, + .stop = ath9k_stop, +@@ -2492,7 +2460,7 @@ static struct { + /* + * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown. + */ +-static const char * ++const char * + ath_mac_bb_name(u32 mac_bb_version) + { + int i; +@@ -2509,7 +2477,7 @@ ath_mac_bb_name(u32 mac_bb_version) + /* + * Return the RF name. "????" is returned if the RF is unknown. + */ +-static const char * ++const char * + ath_rf_name(u16 rf_version) + { + int i; +@@ -2523,236 +2491,7 @@ ath_rf_name(u16 rf_version) + return "????"; + } + +-static void ath_pci_cleanup(struct ath_softc *sc) +-{ +- struct pci_dev *pdev = to_pci_dev(sc->dev); +- +- ath_detach(sc); +- if (pdev->irq) +- free_irq(pdev->irq, sc); +- pci_iounmap(pdev, sc->mem); +- pci_release_region(pdev, 0); +- pci_disable_device(pdev); +- ieee80211_free_hw(sc->hw); +-} +- +-static struct ath_bus_ops ath_pci_bus_ops = { +- .read_cachesize = ath_pci_read_cachesize, +- .cleanup = ath_pci_cleanup, +-}; +- +-static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +-{ +- void __iomem *mem; +- struct ath_softc *sc; +- struct ieee80211_hw *hw; +- u8 csz; +- u32 val; +- int ret = 0; +- struct ath_hal *ah; +- +- if (pci_enable_device(pdev)) +- return -EIO; +- +- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); +- +- if (ret) { +- printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); +- goto bad; +- } +- +- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); +- +- if (ret) { +- printk(KERN_ERR "ath9k: 32-bit DMA consistent " +- "DMA enable failed\n"); +- goto bad; +- } +- +- /* +- * Cache line size is used to size and align various +- * structures used to communicate with the hardware. +- */ +- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); +- if (csz == 0) { +- /* +- * Linux 2.4.18 (at least) writes the cache line size +- * register as a 16-bit wide register which is wrong. +- * We must have this setup properly for rx buffer +- * DMA to work so force a reasonable value here if it +- * comes up zero. +- */ +- csz = L1_CACHE_BYTES / sizeof(u32); +- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); +- } +- /* +- * The default setting of latency timer yields poor results, +- * set it to the value used by other systems. It may be worth +- * tweaking this setting more. +- */ +- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); +- +- pci_set_master(pdev); +- +- /* +- * Disable the RETRY_TIMEOUT register (0x41) to keep +- * PCI Tx retries from interfering with C3 CPU state. +- */ +- pci_read_config_dword(pdev, 0x40, &val); +- if ((val & 0x0000ff00) != 0) +- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); +- +- ret = pci_request_region(pdev, 0, "ath9k"); +- if (ret) { +- dev_err(&pdev->dev, "PCI memory region reserve error\n"); +- ret = -ENODEV; +- goto bad; +- } +- +- mem = pci_iomap(pdev, 0, 0); +- if (!mem) { +- printk(KERN_ERR "PCI memory map error\n") ; +- ret = -EIO; +- goto bad1; +- } +- +- hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); +- if (hw == NULL) { +- printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n"); +- goto bad2; +- } +- +- SET_IEEE80211_DEV(hw, &pdev->dev); +- pci_set_drvdata(pdev, hw); +- +- sc = hw->priv; +- sc->hw = hw; +- sc->dev = &pdev->dev; +- sc->mem = mem; +- sc->bus_ops = &ath_pci_bus_ops; +- +- if (ath_attach(id->device, sc) != 0) { +- ret = -ENODEV; +- goto bad3; +- } +- +- /* setup interrupt service routine */ +- +- if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) { +- printk(KERN_ERR "%s: request_irq failed\n", +- wiphy_name(hw->wiphy)); +- ret = -EIO; +- goto bad4; +- } +- +- ah = sc->sc_ah; +- printk(KERN_INFO +- "%s: Atheros AR%s MAC/BB Rev:%x " +- "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n", +- wiphy_name(hw->wiphy), +- ath_mac_bb_name(ah->ah_macVersion), +- ah->ah_macRev, +- ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)), +- ah->ah_phyRev, +- (unsigned long)mem, pdev->irq); +- +- return 0; +-bad4: +- ath_detach(sc); +-bad3: +- ieee80211_free_hw(hw); +-bad2: +- pci_iounmap(pdev, mem); +-bad1: +- pci_release_region(pdev, 0); +-bad: +- pci_disable_device(pdev); +- return ret; +-} +- +-static void ath_pci_remove(struct pci_dev *pdev) +-{ +- struct ieee80211_hw *hw = pci_get_drvdata(pdev); +- struct ath_softc *sc = hw->priv; +- +- ath_pci_cleanup(sc); +-} +- +-#ifdef CONFIG_PM +- +-static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) +-{ +- struct ieee80211_hw *hw = pci_get_drvdata(pdev); +- struct ath_softc *sc = hw->priv; +- +- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); +- +-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) +- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) +- cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); +-#endif +- +- pci_save_state(pdev); +- pci_disable_device(pdev); +- pci_set_power_state(pdev, 3); +- +- return 0; +-} +- +-static int ath_pci_resume(struct pci_dev *pdev) +-{ +- struct ieee80211_hw *hw = pci_get_drvdata(pdev); +- struct ath_softc *sc = hw->priv; +- u32 val; +- int err; +- +- err = pci_enable_device(pdev); +- if (err) +- return err; +- pci_restore_state(pdev); +- /* +- * Suspend/Resume resets the PCI configuration space, so we have to +- * re-disable the RETRY_TIMEOUT register (0x41) to keep +- * PCI Tx retries from interfering with C3 CPU state +- */ +- pci_read_config_dword(pdev, 0x40, &val); +- if ((val & 0x0000ff00) != 0) +- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); +- +- /* Enable LED */ +- ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, +- AR_GPIO_OUTPUT_MUX_AS_OUTPUT); +- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); +- +-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) +- /* +- * check the h/w rfkill state on resume +- * and start the rfkill poll timer +- */ +- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) +- queue_delayed_work(sc->hw->workqueue, +- &sc->rf_kill.rfkill_poll, 0); +-#endif +- +- return 0; +-} +- +-#endif /* CONFIG_PM */ +- +-MODULE_DEVICE_TABLE(pci, ath_pci_id_table); +- +-static struct pci_driver ath_pci_driver = { +- .name = "ath9k", +- .id_table = ath_pci_id_table, +- .probe = ath_pci_probe, +- .remove = ath_pci_remove, +-#ifdef CONFIG_PM +- .suspend = ath_pci_suspend, +- .resume = ath_pci_resume, +-#endif /* CONFIG_PM */ +-}; +- +-static int __init init_ath_pci(void) ++static int __init ath9k_init(void) + { + int error; + +@@ -2764,26 +2503,30 @@ static int __init init_ath_pci(void) + printk(KERN_ERR + "Unable to register rate control algorithm: %d\n", + error); +- ath_rate_control_unregister(); +- return error; ++ goto err_out; + } + +- if (pci_register_driver(&ath_pci_driver) < 0) { ++ error = ath_pci_init(); ++ if (error < 0) { + printk(KERN_ERR + "ath_pci: No devices found, driver not installed.\n"); +- ath_rate_control_unregister(); +- pci_unregister_driver(&ath_pci_driver); +- return -ENODEV; ++ error = -ENODEV; ++ goto err_rate_unregister; + } + + return 0; ++ ++ err_rate_unregister: ++ ath_rate_control_unregister(); ++ err_out: ++ return error; + } +-module_init(init_ath_pci); ++module_init(ath9k_init); + +-static void __exit exit_ath_pci(void) ++static void __exit ath9k_exit(void) + { ++ ath_pci_exit(); + ath_rate_control_unregister(); +- pci_unregister_driver(&ath_pci_driver); + printk(KERN_INFO "%s: Driver unloaded\n", dev_info); + } +-module_exit(exit_ath_pci); ++module_exit(ath9k_exit); +--- /dev/null ++++ b/drivers/net/wireless/ath9k/pci.c +@@ -0,0 +1,289 @@ ++/* ++ * Copyright (c) 2008 Atheros Communications Inc. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include ++#include ++#include "core.h" ++#include "reg.h" ++#include "hw.h" ++ ++static struct pci_device_id ath_pci_id_table[] __devinitdata = { ++ { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */ ++ { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */ ++ { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ ++ { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ ++ { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ ++ { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */ ++ { 0 } ++}; ++ ++/* return bus cachesize in 4B word units */ ++static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz) ++{ ++ u8 u8tmp; ++ ++ pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, ++ (u8 *)&u8tmp); ++ *csz = (int)u8tmp; ++ ++ /* ++ * This check was put in to avoid "unplesant" consequences if ++ * the bootrom has not fully initialized all PCI devices. ++ * Sometimes the cache line size register is not set ++ */ ++ ++ if (*csz == 0) ++ *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ ++} ++ ++static void ath_pci_cleanup(struct ath_softc *sc) ++{ ++ struct pci_dev *pdev = to_pci_dev(sc->dev); ++ ++ ath_detach(sc); ++ if (pdev->irq) ++ free_irq(pdev->irq, sc); ++ pci_iounmap(pdev, sc->mem); ++ pci_release_region(pdev, 0); ++ pci_disable_device(pdev); ++ ieee80211_free_hw(sc->hw); ++} ++ ++static struct ath_bus_ops ath_pci_bus_ops = { ++ .read_cachesize = ath_pci_read_cachesize, ++ .cleanup = ath_pci_cleanup, ++}; ++ ++static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) ++{ ++ void __iomem *mem; ++ struct ath_softc *sc; ++ struct ieee80211_hw *hw; ++ u8 csz; ++ u32 val; ++ int ret = 0; ++ struct ath_hal *ah; ++ ++ if (pci_enable_device(pdev)) ++ return -EIO; ++ ++ ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); ++ ++ if (ret) { ++ printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); ++ goto bad; ++ } ++ ++ ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); ++ ++ if (ret) { ++ printk(KERN_ERR "ath9k: 32-bit DMA consistent " ++ "DMA enable failed\n"); ++ goto bad; ++ } ++ ++ /* ++ * Cache line size is used to size and align various ++ * structures used to communicate with the hardware. ++ */ ++ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); ++ if (csz == 0) { ++ /* ++ * Linux 2.4.18 (at least) writes the cache line size ++ * register as a 16-bit wide register which is wrong. ++ * We must have this setup properly for rx buffer ++ * DMA to work so force a reasonable value here if it ++ * comes up zero. ++ */ ++ csz = L1_CACHE_BYTES / sizeof(u32); ++ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); ++ } ++ /* ++ * The default setting of latency timer yields poor results, ++ * set it to the value used by other systems. It may be worth ++ * tweaking this setting more. ++ */ ++ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); ++ ++ pci_set_master(pdev); ++ ++ /* ++ * Disable the RETRY_TIMEOUT register (0x41) to keep ++ * PCI Tx retries from interfering with C3 CPU state. ++ */ ++ pci_read_config_dword(pdev, 0x40, &val); ++ if ((val & 0x0000ff00) != 0) ++ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); ++ ++ ret = pci_request_region(pdev, 0, "ath9k"); ++ if (ret) { ++ dev_err(&pdev->dev, "PCI memory region reserve error\n"); ++ ret = -ENODEV; ++ goto bad; ++ } ++ ++ mem = pci_iomap(pdev, 0, 0); ++ if (!mem) { ++ printk(KERN_ERR "PCI memory map error\n") ; ++ ret = -EIO; ++ goto bad1; ++ } ++ ++ hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); ++ if (hw == NULL) { ++ printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n"); ++ goto bad2; ++ } ++ ++ SET_IEEE80211_DEV(hw, &pdev->dev); ++ pci_set_drvdata(pdev, hw); ++ ++ sc = hw->priv; ++ sc->hw = hw; ++ sc->dev = &pdev->dev; ++ sc->mem = mem; ++ sc->bus_ops = &ath_pci_bus_ops; ++ ++ if (ath_attach(id->device, sc) != 0) { ++ ret = -ENODEV; ++ goto bad3; ++ } ++ ++ /* setup interrupt service routine */ ++ ++ if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) { ++ printk(KERN_ERR "%s: request_irq failed\n", ++ wiphy_name(hw->wiphy)); ++ ret = -EIO; ++ goto bad4; ++ } ++ ++ ah = sc->sc_ah; ++ printk(KERN_INFO ++ "%s: Atheros AR%s MAC/BB Rev:%x " ++ "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n", ++ wiphy_name(hw->wiphy), ++ ath_mac_bb_name(ah->ah_macVersion), ++ ah->ah_macRev, ++ ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)), ++ ah->ah_phyRev, ++ (unsigned long)mem, pdev->irq); ++ ++ return 0; ++bad4: ++ ath_detach(sc); ++bad3: ++ ieee80211_free_hw(hw); ++bad2: ++ pci_iounmap(pdev, mem); ++bad1: ++ pci_release_region(pdev, 0); ++bad: ++ pci_disable_device(pdev); ++ return ret; ++} ++ ++static void ath_pci_remove(struct pci_dev *pdev) ++{ ++ struct ieee80211_hw *hw = pci_get_drvdata(pdev); ++ struct ath_softc *sc = hw->priv; ++ ++ ath_pci_cleanup(sc); ++} ++ ++#ifdef CONFIG_PM ++ ++static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct ieee80211_hw *hw = pci_get_drvdata(pdev); ++ struct ath_softc *sc = hw->priv; ++ ++ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); ++ ++#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) ++ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) ++ cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); ++#endif ++ ++ pci_save_state(pdev); ++ pci_disable_device(pdev); ++ pci_set_power_state(pdev, 3); ++ ++ return 0; ++} ++ ++static int ath_pci_resume(struct pci_dev *pdev) ++{ ++ struct ieee80211_hw *hw = pci_get_drvdata(pdev); ++ struct ath_softc *sc = hw->priv; ++ u32 val; ++ int err; ++ ++ err = pci_enable_device(pdev); ++ if (err) ++ return err; ++ pci_restore_state(pdev); ++ /* ++ * Suspend/Resume resets the PCI configuration space, so we have to ++ * re-disable the RETRY_TIMEOUT register (0x41) to keep ++ * PCI Tx retries from interfering with C3 CPU state ++ */ ++ pci_read_config_dword(pdev, 0x40, &val); ++ if ((val & 0x0000ff00) != 0) ++ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); ++ ++ /* Enable LED */ ++ ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, ++ AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ++ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); ++ ++#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) ++ /* ++ * check the h/w rfkill state on resume ++ * and start the rfkill poll timer ++ */ ++ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) ++ queue_delayed_work(sc->hw->workqueue, ++ &sc->rf_kill.rfkill_poll, 0); ++#endif ++ ++ return 0; ++} ++ ++#endif /* CONFIG_PM */ ++ ++MODULE_DEVICE_TABLE(pci, ath_pci_id_table); ++ ++static struct pci_driver ath_pci_driver = { ++ .name = "ath9k", ++ .id_table = ath_pci_id_table, ++ .probe = ath_pci_probe, ++ .remove = ath_pci_remove, ++#ifdef CONFIG_PM ++ .suspend = ath_pci_suspend, ++ .resume = ath_pci_resume, ++#endif /* CONFIG_PM */ ++}; ++ ++int __init ath_pci_init(void) ++{ ++ return pci_register_driver(&ath_pci_driver); ++} ++ ++void ath_pci_exit(void) ++{ ++ pci_unregister_driver(&ath_pci_driver); ++}