dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ramips: split Phicomm PSG1218 and PSG1218K2C

Browse Source 
PSG1218 got only 4 Ethernet ports and WAN on port 3 while
PSG1218K2C got 5 Ethernet ports and WAN on port 4
Switch to use kmod-kt76x2 instead of kmod-mt76 for both devices while
at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v19.07.3_mercusys_ac12_duma
Daniel Golle 7 years ago
parent 23d7c4d632
commit c5a7dc49d1
9 changed files with 145 additions and 84 deletions
Show Stats Download Patch File Download Diff File

3
target/linux/ramips/base-files/etc/board.d/01_leds
Unescape Escape View File

@ -287,7 +287,8 @@ pbr-m1)
psg1208)
set_wifi_led "$board:white:wlan2g"
;;
psg1218)
psg1218\|
psg1218k2c)
ucidef_set_led_netdev "Network" "Network" "$board:blue:status" "eth0"
ucidef_set_led_default "status" "STATUS" "$board:yellow:status" "0"
;;

6
target/linux/ramips/base-files/etc/board.d/02_network
Unescape Escape View File

@ -95,7 +95,7 @@ ramips_setup_interfaces()
oy-0001|\
pbr-m1|\
psg1208|\
psg1218|\
psg1218k2c|\
r6220|\
sap-g3200u3|\
sk-wb8|\
@ -115,6 +115,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
psg1218)
ucidef_add_switch "switch0" \
"0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
;;
whr-300hp2|\
whr-600d|\
wsr-1166|\

3
target/linux/ramips/base-files/etc/diag.sh
Unescape Escape View File

@ -104,7 +104,8 @@ get_status_led() {
psg1208)
status_led="$board:white:wps"
;;
psg1218)
psg1218|\
psg1218k2c)
status_led="$board:yellow:status"
;;
cy-swr1100|\

3
target/linux/ramips/base-files/lib/ramips.sh
Unescape Escape View File

@ -400,6 +400,9 @@ ramips_board_detect() {
*"PSG1218")
name="psg1218"
;;
*"PSG1218K2C")
name="psg1218k2c"
;;
*"PSR-680W"*)
name="psr-680w"
;;

1
target/linux/ramips/base-files/lib/upgrade/platform.sh
Unescape Escape View File

@ -113,6 +113,7 @@ platform_check_image() {
pbr-m1|\
psg1208|\
psg1218|\
psg1218k2c|\
psr-680w|\
px-4885|\
rb750gr3|\

83
target/linux/ramips/dts/PSG1218.dts
Unescape Escape View File

@ -1,8 +1,6 @@
/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
#include "PSG1218.dtsi"
/ {
compatible = "PSG1218", "ralink,mt7620a-soc";
@ -10,7 +8,6 @@
gpio-leds {
compatible = "gpio-leds";
blue {
label = "psg1218:blue:status";
gpios = <&gpio0 10 1>;
@ -23,59 +20,7 @@
red {
label = "psg1218:red:status";
gpios = <&gpio0 8 0>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio0 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@20000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@30000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
gpios = <&gpio0 8 0>;
};
};
};
@ -83,14 +28,9 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};
@ -100,20 +40,3 @@
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};

74
target/linux/ramips/dts/PSG1218.dtsi
Unescape Escape View File

@ -0,0 +1,74 @@
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
/ {
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio0 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@20000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@30000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};

47
target/linux/ramips/dts/PSG1218K2C.dts
Unescape Escape View File

@ -0,0 +1,47 @@
/dts-v1/;
#include "PSG1218.dtsi"
/ {
compatible = "PSG1218K2C", "ralink,mt7620a-soc";
model = "Phicomm PSG1218K2C";
gpio-leds {
compatible = "gpio-leds";
blue {
label = "psg1218k2c:blue:status";
gpios = <&gpio0 10 1>;
};
yellow {
label = "psg1218k2c:yellow:status";
gpios = <&gpio0 11 1>;
};
red {
label = "psg1218k2c:red:status";
gpios = <&gpio0 8 0>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};

9
target/linux/ramips/image/mt7620.mk
Unescape Escape View File

@ -325,10 +325,17 @@ TARGET_DEVICES += psg1208
define Device/psg1218
DTS := PSG1218
DEVICE_TITLE := Phicomm PSG1218
DEVICE_PACKAGES := kmod-mt76
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += psg1218
define Device/psg1218k2c
DTS := PSG1218K2C
DEVICE_TITLE := Phicomm PSG1218K2C
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += psg1218k2c
define Device/rp-n53
DTS := RP-N53
DEVICE_TITLE := Asus RP-N53

Write Preview
Loading…
Cancel
Save