diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network
index 08819104d2..7acbe4bf62 100755
--- a/target/linux/mvebu/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/base-files/etc/board.d/02_network
@@ -49,6 +49,9 @@ marvell,armada-3720-db)
 marvell,axp-gp)
 	ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 	;;
+methode,uDPU)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
 solidrun,clearfog*a1)
 	# eth0 is standalone ethernet
 	# eth1 is switch (-pro) or standalone ethernet (-base)
diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
new file mode 100644
index 0000000000..5b722b4f83
--- /dev/null
+++ b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "methode,udpu", "marvell,armada3720";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		compatible = "gpio-leds";
+
+		power1 {
+			label = "udpu:green:power";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		power2 {
+			label = "udpu:red:power";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		network1 {
+			label = "udpu:green:network";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		network2 {
+			label = "udpu:red:network";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		alarm1 {
+			label = "udpu:green:alarm";
+			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+		};
+
+		alarm2 {
+			label = "udpu:red:alarm";
+			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* only bootloader is located on the SPI */
+			partition@0 {
+				label = "uboot";
+				reg = <0 0x400000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	lm75@48 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+&eth1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	sfp = <&sfp_eth1>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/target/linux/mvebu/image/cortex-a53.mk b/target/linux/mvebu/image/cortex-a53.mk
index d7014d6f02..228155ec11 100644
--- a/target/linux/mvebu/image/cortex-a53.mk
+++ b/target/linux/mvebu/image/cortex-a53.mk
@@ -35,4 +35,17 @@ define Device/marvell_armada-3720-db
 endef
 TARGET_DEVICES += marvell_armada-3720-db
 
+define Device/methode_uDPU
+  $(call Device/Default-arm64)
+  DEVICE_TITLE := Methode micro-DPU (uDPU)
+  DEVICE_DTS := armada-3720-uDPU
+  KERNEL_LOADADDR := 0x00080000
+  KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+  KERNEL_INITRAMFS_SUFFIX := .itb
+  DEVICE_PACKAGES := f2fs-tools e2fsprogs fdisk ethtool kmod-usb2 kmod-usb3 \
+			kmod-e100 kmod-e1000 kmod-e1000e kmod-igb kmod-ixgbevf \
+			kmod-mdio-gpio kmod-switch-mvsw61xx
+endef
+TARGET_DEVICES += methode_uDPU
+
 endif
diff --git a/target/linux/mvebu/patches-4.19/530-add_armada-3820-uDPU-dts.patch b/target/linux/mvebu/patches-4.19/530-add_armada-3820-uDPU-dts.patch
new file mode 100644
index 0000000000..bd4f0aef9a
--- /dev/null
+++ b/target/linux/mvebu/patches-4.19/530-add_armada-3820-uDPU-dts.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm64/boot/dts/marvell/Makefile
++++ b/arch/arm64/boot/dts/marvell/Makefile
+@@ -2,6 +2,7 @@
+ # Mvebu SoC Family
+ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
++dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
+ dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
+ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb