ath79: add support for Ubiquiti ToughSwitch/EdgeSwitch 8XP

Flash:    8 MB
RAM:      64 MB
SoC:      AR7242
Switch:   bcm53128
USB:      1x USB 2.0
Ethernet: 8x GbE, 1x FE

The Ubiquiti ToughSwitch 8XP is a 8-port PoE Gigabit switch with a single
Fast-Ethernet management port. It supports both 24V passive PoE and 48V
802.11af/at PoE out on all eight ports.

By default the single Fast-Ethernet port labeled "MGMT" is configured as the
WAN port. Thus access to the device is only possible via the eight switch
ports.

Installation of the firware is possible either via serial + tftpboot or
the factory firmware update function via webinterface.

Serial: 3v3 115200 8n1

The serial header is located in the lower left corner of the switches PCB:

|
|
|
| o
| o RX
| o TX
| o GND
|
|
++  +-++-+  ++  ++  +
 +--+ ++ +--++--++--+

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
[fix whitespace issue]
Signed-off-by: David Bauer <mail@david-bauer.net>
master
Tobias Schramm 4 years ago committed by David Bauer
parent 313bde53ce
commit b6946542f8

@ -0,0 +1,322 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "ubnt,edgeswitch-8xp", "qca,ar7242";
model = "Ubiquiti EdgeSwitch 8XP";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_usr;
led-failsafe = &led_usr;
led-running = &led_usr;
led-upgrade = &led_usr;
};
leds {
compatible = "gpio-leds";
led_usr: usr {
label = "ubnt:yellow:usr";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio_spi {
compatible = "spi-gpio";
#address-cells = <0x1>;
ranges;
sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
gpio_hc595: gpio_spi@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <2>;
spi-max-frequency = <100000>;
enable-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
gpio-controller;
#gpio-cells = <2>;
};
};
gpio-export {
compatible = "gpio-export";
poe_24v_port1 {
gpio-export,name = "ubnt:24v-poe:port1";
gpio-export,output = <0>;
gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
};
poe_48v_port1 {
gpio-export,name = "ubnt:48v-poe:port1";
gpio-export,output = <0>;
gpios = <&gpio_hc595 0 GPIO_ACTIVE_HIGH>;
};
poe_24v_port2 {
gpio-export,name = "ubnt:24v-poe:port2";
gpio-export,output = <0>;
gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
};
poe_48v_port2 {
gpio-export,name = "ubnt:48v-poe:port2";
gpio-export,output = <0>;
gpios = <&gpio_hc595 2 GPIO_ACTIVE_HIGH>;
};
poe_24v_port3 {
gpio-export,name = "ubnt:24v-poe:port3";
gpio-export,output = <0>;
gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
};
poe_48v_port3 {
gpio-export,name = "ubnt:48v-poe:port3";
gpio-export,output = <0>;
gpios = <&gpio_hc595 4 GPIO_ACTIVE_HIGH>;
};
poe_24v_port4 {
gpio-export,name = "ubnt:24v-poe:port4";
gpio-export,output = <0>;
gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
};
poe_48v_port4 {
gpio-export,name = "ubnt:48v-poe:port4";
gpio-export,output = <0>;
gpios = <&gpio_hc595 6 GPIO_ACTIVE_HIGH>;
};
poe_24v_port5 {
gpio-export,name = "ubnt:24v-poe:port5";
gpio-export,output = <0>;
gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
};
poe_48v_port5 {
gpio-export,name = "ubnt:48v-poe:port5";
gpio-export,output = <0>;
gpios = <&gpio_hc595 8 GPIO_ACTIVE_HIGH>;
};
poe_24v_port6 {
gpio-export,name = "ubnt:24v-poe:port6";
gpio-export,output = <0>;
gpios = <&gpio_hc595 11 GPIO_ACTIVE_HIGH>;
};
poe_48v_port6 {
gpio-export,name = "ubnt:48v-poe:port6";
gpio-export,output = <0>;
gpios = <&gpio_hc595 10 GPIO_ACTIVE_HIGH>;
};
poe_24v_port7 {
gpio-export,name = "ubnt:24v-poe:port7";
gpio-export,output = <0>;
gpios = <&gpio_hc595 13 GPIO_ACTIVE_HIGH>;
};
poe_48v_port7 {
gpio-export,name = "ubnt:48v-poe:port7";
gpio-export,output = <0>;
gpios = <&gpio_hc595 12 GPIO_ACTIVE_HIGH>;
};
poe_24v_port8 {
gpio-export,name = "ubnt:24v-poe:port8";
gpio-export,output = <0>;
gpios = <&gpio_hc595 15 GPIO_ACTIVE_HIGH>;
};
poe_48v_port8 {
gpio-export,name = "ubnt:48v-poe:port8";
gpio-export,output = <0>;
gpios = <&gpio_hc595 14 GPIO_ACTIVE_HIGH>;
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x000000 0x040000>;
label = "u-boot";
read-only;
};
partition@40000 {
reg = <0x040000 0x010000>;
label = "u-boot-env";
read-only;
};
partition@50000 {
compatible = "denx,uimage";
reg = <0x050000 0x760000>;
label = "firmware";
};
partition@7b0000 {
reg = <0x7b0000 0x040000>;
label = "cfg";
read-only;
};
art: partition@7f0000 {
reg = <0x7f0000 0x010000>;
label = "art";
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0x10>;
ethernet-switch@1e {
compatible = "brcm,bcm53128";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1e>;
ports {
port0@0 {
reg = <0>;
label = "lan1";
};
port1@1 {
reg = <1>;
label = "lan2";
};
port2@2 {
reg = <2>;
label = "lan3";
};
port3@3 {
reg = <3>;
label = "lan4";
};
port4@4 {
reg = <4>;
label = "lan5";
};
port5@5 {
reg = <5>;
label = "lan6";
};
port6@6 {
reg = <6>;
label = "lan7";
};
port7@7 {
reg = <7>;
label = "lan8";
};
phy0: port8@8 {
reg = <8>;
label = "cpu";
ethernet = <&eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&usb_phy {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie {
status = "okay";
};
&uart {
status = "okay";
};
&eth0 {
status = "okay";
phy-mode = "rgmii-rxid";
pll-data = <0x16000000 0x00000101 0x00001313>;
mtd-mac-address = <&art 0x0>;
phy-handle = <&phy0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
};

@ -259,6 +259,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
;;
ubnt,edgeswitch-8xp)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:lan:5" "5:lan:6" "6:lan:7" "7:lan:8" "8@eth0"
;;
ubnt,routerstation-pro)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \

@ -129,6 +129,13 @@ define Device/ubnt_bullet-m-xw
endef
TARGET_DEVICES += ubnt_bullet-m-xw
define Device/ubnt_edgeswitch-8xp
$(Device/ubnt-sw)
DEVICE_MODEL := EdgeSwitch 8XP
DEVICE_PACKAGES += switch-bcm53xx-mdio
endef
TARGET_DEVICES += ubnt_edgeswitch-8xp
define Device/ubnt_lap-120
$(Device/ubnt-wa)
DEVICE_MODEL := LiteAP ac

Loading…
Cancel
Save