ramips: add Widora-NEO board support

The Widora board is similar to the Linkit 7688 but features a larger flash
capacity.

Signed-off-by: Yuan Chenmang <771992497@qq.com>
[Jo-Philipp Wich: Reword commit message, cleanup initial PR]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
v19.07.3_mercusys_ac12_duma
Yuan Chenmang 8 years ago committed by Jo-Philipp Wich
parent 5770678122
commit b38296f2f6

@ -50,6 +50,7 @@ ramips_setup_interfaces()
mpr-a2|\
ncs601w|\
w150m|\
widora-neo|\
wnce2001|\
zte-q7)
ucidef_add_switch "switch0"

@ -156,7 +156,8 @@ get_status_led() {
re6500|\
whr-1166d|\
whr-300hp2|\
whr-600d)
whr-600d|\
widora-neo)
status_led="$board:orange:wifi"
;;
mzk-ex300np|\

@ -436,6 +436,9 @@ ramips_board_detect() {
*"WHR-G300N")
name="whr-g300n"
;;
*"Widora-NEO")
name="widora-neo"
;;
*"WiTi")
name="witi"
;;

@ -129,6 +129,7 @@ platform_check_image() {
whr-300hp2|\
whr-600d|\
whr-g300n|\
widora-neo|\
witi|\
wizfi630a|\
wl-330n|\

@ -0,0 +1,169 @@
/dts-v1/;
#include "mt7628an.dtsi"
/ {
compatible = "mediatek,widora-neo", "mediatek,mt7628an-soc";
model = "Widora-NEO";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "widora:orange:wifi";
gpios = <&wgpio 0 0>;
default-state = "on";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "reset";
gpios = <&gpio1 6 1>;
linux,code = <0x211>;
};
};
wgpio: gpio-wifi {
compatible = "mediatek,gpio-wifi";
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "gpio";
ralink,function = "gpio";
};
perst {
ralink,group = "perst";
ralink,function = "gpio";
};
refclk {
ralink,group = "refclk";
ralink,function = "gpio";
};
i2s {
ralink,group = "i2s";
ralink,function = "gpio";
};
spis {
ralink,group = "spis";
ralink,function = "gpio";
};
wled_kn {
ralink,group = "wled_kn";
ralink,function = "gpio";
};
wled_an {
ralink,group = "wled_an";
ralink,function = "wled_an";
};
wdt {
ralink,group = "wdt";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <40000000>;
m25p,chunked-io = <31>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x0fb0000>;
};
};
spidev@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "linux,spidev";
reg = <1>;
spi-max-frequency = <40000000>;
};
};
&i2c {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&pwm {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&sdhci {
status = "okay";
mediatek,cd-low;
};
&wmac {
status = "okay";
};

@ -17,3 +17,11 @@ define Device/wrtnode2r
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += wrtnode2r
define Device/widora-neo
DTS := WIDORA-NEO
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Widora-NEO
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += widora-neo

Loading…
Cancel
Save