ath79: move base-files for ZyXEL NBG6716

Due to rebase of the base-files split patch after adding support
for the ZyXEL NBG6716, its base-files were added to the generic
subtarget, although the device belongs to the nand subtarget.

This moves the definitions to their proper locations.

Fixes: 0130022bae ("ath79: split base-files into subtargets")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[improve commit message, rebase]
Signed-off-by: David Bauer <mail@david-bauer.net>

target/linux/ath79/generic/base-files/etc/board.d/02_network

@@ -261,10 +261,6 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "3:lan:1" "4:lan:2"
 		;;
-	zyxel,nbg6716)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
-		;;
 	*)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
@@ -399,10 +395,6 @@ ath79_setup_macs()
 	wd,mynet-wifi-rangeextender)
 		lan_mac=$(nvram get et0macaddr)
 		;;
-	zyxel,nbg6716)
-		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
-		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
-		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac

target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -47,10 +47,6 @@ case "$FIRMWARE" in
 		caldata_extract "radiocfg" 0x1000 0x440
 		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
 		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
-		;;
 	*)
 		caldata_die "board $board is not supported yet"
 		;;

target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -113,10 +113,6 @@ case "$FIRMWARE" in
 	ubnt,unifiac-pro)
 		caldata_extract "EEPROM" 0x5000 0x844
 		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
-		;;
 	esac
 	;;
 "ath10k/pre-cal-pci-0000:00:00.0.bin")

target/linux/ath79/generic/base-files/lib/upgrade/platform.sh

@@ -51,9 +51,6 @@ platform_do_upgrade() {
 	ubnt,routerstation-pro)
 		echo "Sysupgrade disabled due bug FS#2428"
 		;;
-	zyxel,nbg6716)
-		nand_do_upgrade "$1"
-		;;
 	*)
 		default_do_upgrade "$1"
 		;;

target/linux/ath79/nand/base-files/etc/board.d/02_network

@@ -11,6 +11,10 @@ ath79_setup_interfaces()
 	aerohive,hiveap-121)
 		ucidef_set_interface_lan "eth0"
 		;;
+	zyxel,nbg6716)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
+		;;
 	*)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
@@ -22,6 +26,10 @@ ath79_setup_macs()
 	local board="$1"
 
 	case "$board" in
+	zyxel,nbg6716)
+		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac

target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath9k-eeprom-ahb-18100000.wmac.bin")
+	case $board in
+	zyxel,nbg6716)
+		caldata_extract "art" 0x1000 0x440
+		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
+		;;
+	*)
+		caldata_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+esac

target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -0,0 +1,22 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+. /lib/functions/k2t.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:00:00.0.bin")
+	case $board in
+	zyxel,nbg6716)
+		caldata_extract "art" 0x5000 0x844
+		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

target/linux/ath79/nand/base-files/lib/upgrade/platform.sh

@@ -13,7 +13,8 @@ platform_do_upgrade() {
 	local board=$(board_name)
 
 	case "$board" in
-	aerohive,hiveap-121)
+	aerohive,hiveap-121|\
+	zyxel,nbg6716)
 		nand_do_upgrade "$1"
 		;;
 	*)