From a75b69255725501082bb3cbd89d8579f199dafbf Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sun, 19 Jan 2014 17:27:13 +0000 Subject: [PATCH] ralink: add xhci driver Signed-off-by: John Crispin SVN-Revision: 39328 --- .../files/drivers/usb/host/mtk-phy-7621.c | 445 +++ .../files/drivers/usb/host/mtk-phy-7621.h | 2871 +++++++++++++++++ .../files/drivers/usb/host/mtk-phy-ahb.c | 58 + .../ramips/files/drivers/usb/host/mtk-phy.c | 102 + .../ramips/files/drivers/usb/host/mtk-phy.h | 179 + .../files/drivers/usb/host/xhci-mtk-power.c | 115 + .../files/drivers/usb/host/xhci-mtk-power.h | 13 + .../drivers/usb/host/xhci-mtk-scheduler.c | 608 ++++ .../drivers/usb/host/xhci-mtk-scheduler.h | 77 + .../ramips/files/drivers/usb/host/xhci-mtk.c | 265 ++ .../ramips/files/drivers/usb/host/xhci-mtk.h | 120 + ...0512-USB-add-xhci-support-for-mt7621.patch | 862 +++++ 12 files changed, 5715 insertions(+) create mode 100644 target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c create mode 100644 target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h create mode 100644 target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c create mode 100644 target/linux/ramips/files/drivers/usb/host/mtk-phy.c create mode 100644 target/linux/ramips/files/drivers/usb/host/mtk-phy.h create mode 100644 target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c create mode 100644 target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h create mode 100644 target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c create mode 100644 target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h create mode 100644 target/linux/ramips/files/drivers/usb/host/xhci-mtk.c create mode 100644 target/linux/ramips/files/drivers/usb/host/xhci-mtk.h create mode 100644 target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c new file mode 100644 index 0000000000..4e9c0d7a8d --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c @@ -0,0 +1,445 @@ +#include "mtk-phy.h" + +#ifdef CONFIG_PROJECT_7621 +#include "mtk-phy-7621.h" + +//not used on SoC +PHY_INT32 phy_init(struct u3phy_info *info){ + return PHY_TRUE; +} + +//not used on SoC +PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){ + return PHY_TRUE; +} + +//-------------------------------------------------------- +// Function : fgEyeScanHelper_CheckPtInRegion() +// Description : Check if the test point is in a rectangle region. +// If it is in the rectangle, also check if this point +// is on the multiple of deltaX and deltaY. +// Parameter : strucScanRegion * prEye - the region +// BYTE bX +// BYTE bY +// Return : BYTE - TRUE : This point needs to be tested +// FALSE: This point will be omitted +// Note : First check within the rectangle. +// Secondly, use modulous to check if the point will be tested. +//-------------------------------------------------------- +static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY) +{ + PHY_INT8 fgValid = true; + + + /// Be careful, the axis origin is on the TOP-LEFT corner. + /// Therefore the top-left point has the minimum X and Y + /// Botton-right point is the maximum X and Y + if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br) + && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br)) + { + // With the region, now check whether or not the input test point is + // on the multiples of X and Y + // Do not have to worry about negative value, because we have already + // check the input bX, and bY is within the region. + if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX)) + || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) ) + { + // if the division will have remainder, that means + // the input test point is on the multiples of X and Y + fgValid = false; + } + else + { + } + } + else + { + + fgValid = false; + } + return fgValid; +} + +//-------------------------------------------------------- +// Function : EyeScanHelper_RunTest() +// Description : Enable the test, and wait til it is completed +// Parameter : None +// Return : None +// Note : None +//-------------------------------------------------------- +static void EyeScanHelper_RunTest(struct u3phy_info *info) +{ + DRV_UDELAY(100); + // Disable the test + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0 + DRV_UDELAY(100); + // Run the test + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1 + DRV_UDELAY(100); + // Wait til it's done + //RGS_SSUSB_RX_EYE_CNT_RDY + while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) + , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY)); +} + +//-------------------------------------------------------- +// Function : fgEyeScanHelper_CalNextPoint() +// Description : Calcualte the test point for the measurement +// Parameter : None +// Return : BOOL - TRUE : the next point is within the +// boundaryof HW limit +// FALSE: the next point is out of the HW limit +// Note : The next point is obtained by calculating +// from the bottom left of the region rectangle +// and then scanning up until it reaches the upper +// limit. At this time, the x will increment, and +// start scanning downwards until the y hits the +// zero. +//-------------------------------------------------------- +static PHY_INT8 fgEyeScanHelper_CalNextPoint(void) +{ + if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN)) + || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP)) + ) + { + /// Reaches the limit of Y axis + /// Increment X + _bXcurr++; + _fgXChged = true; + _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP; + + if (_bXcurr > MAX_X) + { + return false; + } + } + else + { + _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1; + _fgXChged = false; + } + return PHY_TRUE; +} + +PHY_INT32 eyescan_init(struct u3phy_info *info){ + //initial PHY setting + U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega) + , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1); + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3) + , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1); + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 + return PHY_TRUE; +} + +PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y + , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){ + PHY_INT32 cOfst = 0; + PHY_UINT8 bIdxX = 0; + PHY_UINT8 bIdxY = 0; + //PHY_INT8 bCnt = 0; + PHY_UINT8 bIdxCycCnt = 0; + PHY_INT8 fgValid; + PHY_INT8 cX; + PHY_INT8 cY; + PHY_UINT8 bExtendCnt; + PHY_INT8 isContinue; + //PHY_INT8 isBreak; + PHY_UINT32 wErr0 = 0, wErr1 = 0; + //PHY_UINT32 temp; + + PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; + PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; + + _rEye1.bX_tl = x_t1; + _rEye1.bY_tl = y_t1; + _rEye1.bX_br = x_br; + _rEye1.bY_br = y_br; + _rEye1.bDeltaX = delta_x; + _rEye1.bDeltaY = delta_y; + + _rEye2.bX_tl = x_t1; + _rEye2.bY_tl = y_t1; + _rEye2.bX_br = x_br; + _rEye2.bY_br = y_br; + _rEye2.bDeltaX = delta_x; + _rEye2.bDeltaY = delta_y; + + _rTestCycle.wEyeCnt = eye_cnt; + _rTestCycle.bNumOfEyeCnt = num_cnt; + _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt; + _rTestCycle.bPICalEn = PI_cal_en; + + _bXcurr = 0; + _bYcurr = 0; + _eScanDir = SCAN_DN; + _fgXChged = false; + + printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \ + eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \ + x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt); + + //force SIGDET to OFF + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) + , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0 + + // RX_TRI_DET_EN to Disable + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3) + , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0 + + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0 + + + if (PI_cal_en){ + // PI Calibration + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 + + DRV_UDELAY(20); + + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) + , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 + _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) + , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO + + printk(KERN_ERR "PI result: %d\n", _bPIResult); + } + // Read Initial DAC + // Set CYCLE + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3) + ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT + + // Eye Monitor Feature + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) + , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 + + // Move X,Y to the top-left corner + for (cOfst = 0; cOfst >= -64; cOfst--) + { + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET + } + for (cOfst = 0; cOfst < 64; cOfst++) + { + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y + } + //ClearErrorResult + for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){ + for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++) + { + for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){ + pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0; + pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0; + } + } + } + isContinue = true; + while(isContinue){ + //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr); + // The point is within the boundary, then let's check if it is within + // the testing region. + // The point is only test-able if one of the eye region + // includes this point. + fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr) + || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr); + // Translate bX and bY to 2's complement from where the origin was on the + // top left corner. + // 0x40 and 0x3F needs a bit of thinking!!!! >"< + cX = (_bXcurr ^ 0x40); + cY = (_bYcurr ^ 0x3F); + + // Set X if necessary + if (_fgXChged == true) + { + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET + } + // Set Y + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y + + /// Test this point! + if (fgValid){ + for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++) + { + //run test + EyeScanHelper_RunTest(info); + } + for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++) + { + EyeScanHelper_RunTest(info); + wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3) + , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0); + wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4) + , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1); + + pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0; + pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1; + + //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]); +// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n" +// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]); + } + //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]); + } + else{ + + } + if (fgEyeScanHelper_CalNextPoint() == false){ +#if 0 + printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr); + printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY); +#endif + printk(KERN_ERR "end of eye scan\n"); + isContinue = false; + } + } + printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" + , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) + , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); + + // Move X,Y to the top-left corner + for (cOfst = 63; cOfst >= 0; cOfst--) + { + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET + } + for (cOfst = 63; cOfst >= 0; cOfst--) + { + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); + U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) + , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); + + } + printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" + , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) + , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); + + printk(KERN_ERR "PI result: %d\n", _bPIResult); + printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0); + printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1); + + return PHY_TRUE; +} + +//not used on SoC +PHY_INT32 u2_save_cur_en(struct u3phy_info *info){ + return PHY_TRUE; +} + +//not used on SoC +PHY_INT32 u2_save_cur_re(struct u3phy_info *info){ + return PHY_TRUE; +} + +PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){ + PHY_INT32 i=0; + //PHY_INT32 j=0; + //PHY_INT8 u1SrCalVal = 0; + //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN; + PHY_INT32 fgRet = 0; + PHY_INT32 u4FmOut = 0; + PHY_INT32 u4Tmp = 0; + //PHY_INT32 temp; + + // => RG_USB20_HSTX_SRCAL_EN = 1 + // enable HS TX SR calibration + U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) + , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1); + DRV_MSLEEP(1); + + // => RG_FRCK_EN = 1 + // Enable free run clock + U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) + , RG_FRCK_EN_OFST, RG_FRCK_EN, 1); + + // MT6290 HS signal quality patch + // => RG_CYCLECNT = 400 + // Setting cyclecnt =400 + U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) + , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400); + + // => RG_FREQDET_EN = 1 + // Enable frequency meter + U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) + , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1); + + // wait for FM detection done, set 10ms timeout + for(i=0; i<10; i++){ + // => u4FmOut = USB_FM_OUT + // read FM_OUT + u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0)); + printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut); + + // check if FM detection done + if (u4FmOut != 0) + { + fgRet = 0; + printk("FM detection done! loop = %d\n", i); + + break; + } + + fgRet = 1; + DRV_MSLEEP(1); + } + // => RG_FREQDET_EN = 0 + // disable frequency meter + U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) + , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0); + + // => RG_FRCK_EN = 0 + // disable free run clock + U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) + , RG_FRCK_EN_OFST, RG_FRCK_EN, 0); + + // => RG_USB20_HSTX_SRCAL_EN = 0 + // disable HS TX SR calibration + U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) + , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0); + DRV_MSLEEP(1); + + if(u4FmOut == 0){ + U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) + , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4); + + fgRet = 1; + } + else{ + // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits) + u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000; + printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp); + U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) + , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp); + } + return fgRet; +} + +#endif diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h new file mode 100644 index 0000000000..41b0c7744b --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h @@ -0,0 +1,2871 @@ +#ifdef CONFIG_PROJECT_7621 +#ifndef __MTK_PHY_7621_H +#define __MTK_PHY_7621_H + +#define U2_SR_COEF_7621 28 + +/////////////////////////////////////////////////////////////////////////////// + +struct u2phy_reg { + //0x0 + PHY_LE32 u2phyac0; + PHY_LE32 u2phyac1; + PHY_LE32 u2phyac2; + PHY_LE32 reserve0; + //0x10 + PHY_LE32 u2phyacr0; + PHY_LE32 u2phyacr1; + PHY_LE32 u2phyacr2; + PHY_LE32 u2phyacr3; + //0x20 + PHY_LE32 u2phyacr4; + PHY_LE32 u2phyamon0; + PHY_LE32 reserve1[2]; + //0x30~0x50 + PHY_LE32 reserve2[12]; + //0x60 + PHY_LE32 u2phydcr0; + PHY_LE32 u2phydcr1; + PHY_LE32 u2phydtm0; + PHY_LE32 u2phydtm1; + //0x70 + PHY_LE32 u2phydmon0; + PHY_LE32 u2phydmon1; + PHY_LE32 u2phydmon2; + PHY_LE32 u2phydmon3; + //0x80 + PHY_LE32 u2phybc12c; + PHY_LE32 u2phybc12c1; + PHY_LE32 reserve3[2]; + //0x90~0xe0 + PHY_LE32 reserve4[24]; + //0xf0 + PHY_LE32 reserve6[3]; + PHY_LE32 regfcom; +}; + +//U3D_U2PHYAC0 +#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28 +#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26 +#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24 +#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23 +#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16 +#define RG_USB20_REF_EN (0x1<<15) //15:15 +#define RG_USB20_INTR_EN (0x1<<14) //14:14 +#define RG_USB20_BG_TRIM (0xf<<8) //11:8 +#define RG_USB20_BG_RBSEL (0x3<<6) //7:6 +#define RG_USB20_BG_RASEL (0x3<<4) //5:4 +#define RG_USB20_BGR_DIV (0x3<<2) //3:2 +#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1 +#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0 + +//U3D_U2PHYAC1 +#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28 +#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24 +#define RG_USB20_MPX_SEL (0xff<<16) //23:16 +#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12 +#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8 +#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3 +#define RG_USB20_USBPLL_LF (0x1<<2) //2:2 +#define RG_USB20_USBPLL_BR (0x1<<1) //1:1 +#define RG_USB20_USBPLL_BP (0x1<<0) //0:0 + +//U3D_U2PHYAC2 +#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17 +#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16 +#define RG_USB20_CLKREF_REV (0xff<<0) //7:0 + +//U3D_U2PHYACR0 +#define RG_USB20_ICUSB_EN (0x1<<24) //24:24 +#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23 +#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16 +#define RG_USB20_LS_CR (0x7<<12) //14:12 +#define RG_USB20_FS_CR (0x7<<8) //10:8 +#define RG_USB20_LS_SR (0x7<<4) //6:4 +#define RG_USB20_FS_SR (0x7<<0) //2:0 + +//U3D_U2PHYACR1 +#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28 +#define RG_USB20_SQD (0x3<<24) //25:24 +#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20 +#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19 +#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18 +#define RG_USB20_INLPBK_EN (0x1<<17) //17:17 +#define RG_USB20_CHIRP_EN (0x1<<16) //16:16 +#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15 +#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8 +#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7 +#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0 + +//U3D_U2PHYACR2 +#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29 +#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28 +#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27 +#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24 +#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22 +#define RG_USB20_DISCD (0x3<<20) //21:20 +#define RG_USB20_DISCTH (0xf<<16) //19:16 +#define RG_USB20_SQCAL_EN (0x1<<15) //15:15 +#define RG_USB20_SQCAL (0xf<<8) //11:8 +#define RG_USB20_SQTH (0xf<<0) //3:0 + +//U3D_U2PHYACR3 +#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28 +#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26 +#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24 +#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23 +#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20 +#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19 +#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18 +#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17 +#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16 +#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13 +#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12 +#define RG_USB20_EN_PU_DM (0x1<<11) //11:11 +#define RG_USB20_EN_PD_DM (0x1<<10) //10:10 +#define RG_USB20_EN_PU_DP (0x1<<9) //9:9 +#define RG_USB20_EN_PD_DP (0x1<<8) //8:8 +#define RG_USB20_PHY_REV (0xff<<0) //7:0 + +//U3D_U2PHYACR4 +#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18 +#define RG_USB20_DM_100K_EN (0x1<<17) //17:17 +#define USB20_DP_100K_EN (0x1<<16) //16:16 +#define USB20_GPIO_DM_I (0x1<<15) //15:15 +#define USB20_GPIO_DP_I (0x1<<14) //14:14 +#define USB20_GPIO_DM_OE (0x1<<13) //13:13 +#define USB20_GPIO_DP_OE (0x1<<12) //12:12 +#define RG_USB20_GPIO_CTL (0x1<<9) //9:9 +#define USB20_GPIO_MODE (0x1<<8) //8:8 +#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5 +#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4 +#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2 +#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0 + +//U3D_U2PHYAMON0 +#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1 +#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0 + +//U3D_U2PHYDCR0 +#define RG_USB20_CDR_TST (0x3<<30) //31:30 +#define RG_USB20_GATED_ENB (0x1<<29) //29:29 +#define RG_USB20_TESTMODE (0x3<<26) //27:26 +#define RG_USB20_PLL_STABLE (0x1<<25) //25:25 +#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24 +#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8 +#define RG_USB20_EBTHRLD (0x1<<7) //7:7 +#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6 +#define RG_USB20_TX_TST (0x1<<5) //5:5 +#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4 +#define RG_USB20_CDR_FILT (0xf<<0) //3:0 + +//U3D_U2PHYDCR1 +#define RG_USB20_PROBE_SEL (0xff<<24) //31:24 +#define RG_USB20_DRVVBUS (0x1<<23) //23:23 +#define RG_DEBUG_EN (0x1<<22) //22:22 +#define RG_USB20_OTG_PROBE (0x3<<20) //21:20 +#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18 +#define RG_USB20_BERTH (0x3<<16) //17:16 +#define RG_USB20_LBMODE (0x3<<13) //14:13 +#define RG_USB20_FORCE_TAP (0x1<<12) //12:12 +#define RG_USB20_TAPSEL (0xfff<<0) //11:0 + +//U3D_U2PHYDTM0 +#define RG_UART_MODE (0x3<<30) //31:30 +#define FORCE_UART_I (0x1<<29) //29:29 +#define FORCE_UART_BIAS_EN (0x1<<28) //28:28 +#define FORCE_UART_TX_OE (0x1<<27) //27:27 +#define FORCE_UART_EN (0x1<<26) //26:26 +#define FORCE_USB_CLKEN (0x1<<25) //25:25 +#define FORCE_DRVVBUS (0x1<<24) //24:24 +#define FORCE_DATAIN (0x1<<23) //23:23 +#define FORCE_TXVALID (0x1<<22) //22:22 +#define FORCE_DM_PULLDOWN (0x1<<21) //21:21 +#define FORCE_DP_PULLDOWN (0x1<<20) //20:20 +#define FORCE_XCVRSEL (0x1<<19) //19:19 +#define FORCE_SUSPENDM (0x1<<18) //18:18 +#define FORCE_TERMSEL (0x1<<17) //17:17 +#define FORCE_OPMODE (0x1<<16) //16:16 +#define UTMI_MUXSEL (0x1<<15) //15:15 +#define RG_RESET (0x1<<14) //14:14 +#define RG_DATAIN (0xf<<10) //13:10 +#define RG_TXVALIDH (0x1<<9) //9:9 +#define RG_TXVALID (0x1<<8) //8:8 +#define RG_DMPULLDOWN (0x1<<7) //7:7 +#define RG_DPPULLDOWN (0x1<<6) //6:6 +#define RG_XCVRSEL (0x3<<4) //5:4 +#define RG_SUSPENDM (0x1<<3) //3:3 +#define RG_TERMSEL (0x1<<2) //2:2 +#define RG_OPMODE (0x3<<0) //1:0 + +//U3D_U2PHYDTM1 +#define RG_USB20_PRBS7_EN (0x1<<31) //31:31 +#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24 +#define RG_USB20_CLK48M_EN (0x1<<23) //23:23 +#define RG_USB20_CLK60M_EN (0x1<<22) //22:22 +#define RG_UART_I (0x1<<19) //19:19 +#define RG_UART_BIAS_EN (0x1<<18) //18:18 +#define RG_UART_TX_OE (0x1<<17) //17:17 +#define RG_UART_EN (0x1<<16) //16:16 +#define FORCE_VBUSVALID (0x1<<13) //13:13 +#define FORCE_SESSEND (0x1<<12) //12:12 +#define FORCE_BVALID (0x1<<11) //11:11 +#define FORCE_AVALID (0x1<<10) //10:10 +#define FORCE_IDDIG (0x1<<9) //9:9 +#define FORCE_IDPULLUP (0x1<<8) //8:8 +#define RG_VBUSVALID (0x1<<5) //5:5 +#define RG_SESSEND (0x1<<4) //4:4 +#define RG_BVALID (0x1<<3) //3:3 +#define RG_AVALID (0x1<<2) //2:2 +#define RG_IDDIG (0x1<<1) //1:1 +#define RG_IDPULLUP (0x1<<0) //0:0 + +//U3D_U2PHYDMON0 +#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0 + +//U3D_U2PHYDMON1 +#define USB20_UART_O (0x1<<31) //31:31 +#define RGO_USB20_LB_PASS (0x1<<30) //30:30 +#define RGO_USB20_LB_DONE (0x1<<29) //29:29 +#define AD_USB20_BVALID (0x1<<28) //28:28 +#define USB20_IDDIG (0x1<<27) //27:27 +#define AD_USB20_VBUSVALID (0x1<<26) //26:26 +#define AD_USB20_SESSEND (0x1<<25) //25:25 +#define AD_USB20_AVALID (0x1<<24) //24:24 +#define USB20_LINE_STATE (0x3<<22) //23:22 +#define USB20_HST_DISCON (0x1<<21) //21:21 +#define USB20_TX_READY (0x1<<20) //20:20 +#define USB20_RX_ERROR (0x1<<19) //19:19 +#define USB20_RX_ACTIVE (0x1<<18) //18:18 +#define USB20_RX_VALIDH (0x1<<17) //17:17 +#define USB20_RX_VALID (0x1<<16) //16:16 +#define USB20_DATA_OUT (0xffff<<0) //15:0 + +//U3D_U2PHYDMON2 +#define RGO_TXVALID_CNT (0xff<<24) //31:24 +#define RGO_RXACTIVE_CNT (0xff<<16) //23:16 +#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8 +#define USB20_PROBE_OUT (0xff<<0) //7:0 + +//U3D_U2PHYDMON3 +#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16 +#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3 +#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2 +#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1 +#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0 + +//U3D_U2PHYBC12C +#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28 +#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24 +#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16 +#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14 +#define RG_CHGDT_VDATSRC (0x1<<13) //13:13 +#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10 +#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8 +#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7 +#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6 +#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5 +#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4 +#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3 +#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2 +#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1 +#define RG_CHGDT_EN (0x1<<0) //0:0 + +//U3D_U2PHYBC12C1 +#define RG_CHGDT_REV (0xff<<0) //7:0 + +//U3D_REGFCOM +#define RG_PAGE (0xff<<24) //31:24 +#define I2C_MODE (0x1<<16) //16:16 + + +/* OFFSET */ + +//U3D_U2PHYAC0 +#define RG_USB20_USBPLL_DIVEN_OFST (28) +#define RG_USB20_USBPLL_CKCTRL_OFST (26) +#define RG_USB20_USBPLL_PREDIV_OFST (24) +#define RG_USB20_USBPLL_FORCE_ON_OFST (23) +#define RG_USB20_USBPLL_FBDIV_OFST (16) +#define RG_USB20_REF_EN_OFST (15) +#define RG_USB20_INTR_EN_OFST (14) +#define RG_USB20_BG_TRIM_OFST (8) +#define RG_USB20_BG_RBSEL_OFST (6) +#define RG_USB20_BG_RASEL_OFST (4) +#define RG_USB20_BGR_DIV_OFST (2) +#define RG_SIFSLV_CHP_EN_OFST (1) +#define RG_SIFSLV_BGR_EN_OFST (0) + +//U3D_U2PHYAC1 +#define RG_USB20_VRT_VREF_SEL_OFST (28) +#define RG_USB20_TERM_VREF_SEL_OFST (24) +#define RG_USB20_MPX_SEL_OFST (16) +#define RG_USB20_MPX_OUT_SEL_OFST (12) +#define RG_USB20_TX_PH_ROT_SEL_OFST (8) +#define RG_USB20_USBPLL_ACCEN_OFST (3) +#define RG_USB20_USBPLL_LF_OFST (2) +#define RG_USB20_USBPLL_BR_OFST (1) +#define RG_USB20_USBPLL_BP_OFST (0) + +//U3D_U2PHYAC2 +#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17) +#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16) +#define RG_USB20_CLKREF_REV_OFST (0) + +//U3D_U2PHYACR0 +#define RG_USB20_ICUSB_EN_OFST (24) +#define RG_USB20_HSTX_SRCAL_EN_OFST (23) +#define RG_USB20_HSTX_SRCTRL_OFST (16) +#define RG_USB20_LS_CR_OFST (12) +#define RG_USB20_FS_CR_OFST (8) +#define RG_USB20_LS_SR_OFST (4) +#define RG_USB20_FS_SR_OFST (0) + +//U3D_U2PHYACR1 +#define RG_USB20_INIT_SQ_EN_DG_OFST (28) +#define RG_USB20_SQD_OFST (24) +#define RG_USB20_HSTX_TMODE_SEL_OFST (20) +#define RG_USB20_HSTX_TMODE_EN_OFST (19) +#define RG_USB20_PHYD_MONEN_OFST (18) +#define RG_USB20_INLPBK_EN_OFST (17) +#define RG_USB20_CHIRP_EN_OFST (16) +#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15) +#define RG_USB20_DM_ABIST_SELE_OFST (8) +#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7) +#define RG_USB20_DP_ABIST_SELE_OFST (0) + +//U3D_U2PHYACR2 +#define RG_USB20_OTG_ABIST_SELE_OFST (29) +#define RG_USB20_OTG_ABIST_EN_OFST (28) +#define RG_USB20_OTG_VBUSCMP_EN_OFST (27) +#define RG_USB20_OTG_VBUSTH_OFST (24) +#define RG_USB20_DISC_FIT_EN_OFST (22) +#define RG_USB20_DISCD_OFST (20) +#define RG_USB20_DISCTH_OFST (16) +#define RG_USB20_SQCAL_EN_OFST (15) +#define RG_USB20_SQCAL_OFST (8) +#define RG_USB20_SQTH_OFST (0) + +//U3D_U2PHYACR3 +#define RG_USB20_HSTX_DBIST_OFST (28) +#define RG_USB20_HSTX_BIST_EN_OFST (26) +#define RG_USB20_HSTX_I_EN_MODE_OFST (24) +#define RG_USB20_HSRX_TMODE_EN_OFST (23) +#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20) +#define RG_USB20_USB11_TMODE_EN_OFST (19) +#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18) +#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17) +#define RG_USB20_TMODE_FS_LS_MODE_OFST (16) +#define RG_USB20_HS_TERM_EN_MODE_OFST (13) +#define RG_USB20_PUPD_BIST_EN_OFST (12) +#define RG_USB20_EN_PU_DM_OFST (11) +#define RG_USB20_EN_PD_DM_OFST (10) +#define RG_USB20_EN_PU_DP_OFST (9) +#define RG_USB20_EN_PD_DP_OFST (8) +#define RG_USB20_PHY_REV_OFST (0) + +//U3D_U2PHYACR4 +#define RG_USB20_DP_100K_MODE_OFST (18) +#define RG_USB20_DM_100K_EN_OFST (17) +#define USB20_DP_100K_EN_OFST (16) +#define USB20_GPIO_DM_I_OFST (15) +#define USB20_GPIO_DP_I_OFST (14) +#define USB20_GPIO_DM_OE_OFST (13) +#define USB20_GPIO_DP_OE_OFST (12) +#define RG_USB20_GPIO_CTL_OFST (9) +#define USB20_GPIO_MODE_OFST (8) +#define RG_USB20_TX_BIAS_EN_OFST (5) +#define RG_USB20_TX_VCMPDN_EN_OFST (4) +#define RG_USB20_HS_SQ_EN_MODE_OFST (2) +#define RG_USB20_HS_RCV_EN_MODE_OFST (0) + +//U3D_U2PHYAMON0 +#define RGO_USB20_GPIO_DM_O_OFST (1) +#define RGO_USB20_GPIO_DP_O_OFST (0) + +//U3D_U2PHYDCR0 +#define RG_USB20_CDR_TST_OFST (30) +#define RG_USB20_GATED_ENB_OFST (29) +#define RG_USB20_TESTMODE_OFST (26) +#define RG_USB20_PLL_STABLE_OFST (25) +#define RG_USB20_PLL_FORCE_ON_OFST (24) +#define RG_USB20_PHYD_RESERVE_OFST (8) +#define RG_USB20_EBTHRLD_OFST (7) +#define RG_USB20_EARLY_HSTX_I_OFST (6) +#define RG_USB20_TX_TST_OFST (5) +#define RG_USB20_NEGEDGE_ENB_OFST (4) +#define RG_USB20_CDR_FILT_OFST (0) + +//U3D_U2PHYDCR1 +#define RG_USB20_PROBE_SEL_OFST (24) +#define RG_USB20_DRVVBUS_OFST (23) +#define RG_DEBUG_EN_OFST (22) +#define RG_USB20_OTG_PROBE_OFST (20) +#define RG_USB20_SW_PLLMODE_OFST (18) +#define RG_USB20_BERTH_OFST (16) +#define RG_USB20_LBMODE_OFST (13) +#define RG_USB20_FORCE_TAP_OFST (12) +#define RG_USB20_TAPSEL_OFST (0) + +//U3D_U2PHYDTM0 +#define RG_UART_MODE_OFST (30) +#define FORCE_UART_I_OFST (29) +#define FORCE_UART_BIAS_EN_OFST (28) +#define FORCE_UART_TX_OE_OFST (27) +#define FORCE_UART_EN_OFST (26) +#define FORCE_USB_CLKEN_OFST (25) +#define FORCE_DRVVBUS_OFST (24) +#define FORCE_DATAIN_OFST (23) +#define FORCE_TXVALID_OFST (22) +#define FORCE_DM_PULLDOWN_OFST (21) +#define FORCE_DP_PULLDOWN_OFST (20) +#define FORCE_XCVRSEL_OFST (19) +#define FORCE_SUSPENDM_OFST (18) +#define FORCE_TERMSEL_OFST (17) +#define FORCE_OPMODE_OFST (16) +#define UTMI_MUXSEL_OFST (15) +#define RG_RESET_OFST (14) +#define RG_DATAIN_OFST (10) +#define RG_TXVALIDH_OFST (9) +#define RG_TXVALID_OFST (8) +#define RG_DMPULLDOWN_OFST (7) +#define RG_DPPULLDOWN_OFST (6) +#define RG_XCVRSEL_OFST (4) +#define RG_SUSPENDM_OFST (3) +#define RG_TERMSEL_OFST (2) +#define RG_OPMODE_OFST (0) + +//U3D_U2PHYDTM1 +#define RG_USB20_PRBS7_EN_OFST (31) +#define RG_USB20_PRBS7_BITCNT_OFST (24) +#define RG_USB20_CLK48M_EN_OFST (23) +#define RG_USB20_CLK60M_EN_OFST (22) +#define RG_UART_I_OFST (19) +#define RG_UART_BIAS_EN_OFST (18) +#define RG_UART_TX_OE_OFST (17) +#define RG_UART_EN_OFST (16) +#define FORCE_VBUSVALID_OFST (13) +#define FORCE_SESSEND_OFST (12) +#define FORCE_BVALID_OFST (11) +#define FORCE_AVALID_OFST (10) +#define FORCE_IDDIG_OFST (9) +#define FORCE_IDPULLUP_OFST (8) +#define RG_VBUSVALID_OFST (5) +#define RG_SESSEND_OFST (4) +#define RG_BVALID_OFST (3) +#define RG_AVALID_OFST (2) +#define RG_IDDIG_OFST (1) +#define RG_IDPULLUP_OFST (0) + +//U3D_U2PHYDMON0 +#define RG_USB20_PRBS7_BERTH_OFST (0) + +//U3D_U2PHYDMON1 +#define USB20_UART_O_OFST (31) +#define RGO_USB20_LB_PASS_OFST (30) +#define RGO_USB20_LB_DONE_OFST (29) +#define AD_USB20_BVALID_OFST (28) +#define USB20_IDDIG_OFST (27) +#define AD_USB20_VBUSVALID_OFST (26) +#define AD_USB20_SESSEND_OFST (25) +#define AD_USB20_AVALID_OFST (24) +#define USB20_LINE_STATE_OFST (22) +#define USB20_HST_DISCON_OFST (21) +#define USB20_TX_READY_OFST (20) +#define USB20_RX_ERROR_OFST (19) +#define USB20_RX_ACTIVE_OFST (18) +#define USB20_RX_VALIDH_OFST (17) +#define USB20_RX_VALID_OFST (16) +#define USB20_DATA_OUT_OFST (0) + +//U3D_U2PHYDMON2 +#define RGO_TXVALID_CNT_OFST (24) +#define RGO_RXACTIVE_CNT_OFST (16) +#define RGO_USB20_LB_BERCNT_OFST (8) +#define USB20_PROBE_OUT_OFST (0) + +//U3D_U2PHYDMON3 +#define RGO_USB20_PRBS7_ERRCNT_OFST (16) +#define RGO_USB20_PRBS7_DONE_OFST (3) +#define RGO_USB20_PRBS7_LOCK_OFST (2) +#define RGO_USB20_PRBS7_PASS_OFST (1) +#define RGO_USB20_PRBS7_PASSTH_OFST (0) + +//U3D_U2PHYBC12C +#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28) +#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24) +#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16) +#define RG_CHGDT_ISRC_LEV_OFST (14) +#define RG_CHGDT_VDATSRC_OFST (13) +#define RG_CHGDT_BGVREF_SEL_OFST (10) +#define RG_CHGDT_RDVREF_SEL_OFST (8) +#define RG_CHGDT_ISRC_DP_OFST (7) +#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6) +#define RG_CHGDT_VDAT_DM_OFST (5) +#define RG_CHGDT_OPOUT_DP_OFST (4) +#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3) +#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2) +#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1) +#define RG_CHGDT_EN_OFST (0) + +//U3D_U2PHYBC12C1 +#define RG_CHGDT_REV_OFST (0) + +//U3D_REGFCOM +#define RG_PAGE_OFST (24) +#define I2C_MODE_OFST (16) + + +/////////////////////////////////////////////////////////////////////////////// + +struct u3phya_reg { + //0x0 + PHY_LE32 reg0; + PHY_LE32 reg1; + PHY_LE32 reg2; + PHY_LE32 reg3; + //0x10 + PHY_LE32 reg4; + PHY_LE32 reg5; + PHY_LE32 reg6; + PHY_LE32 reg7; + //0x20 + PHY_LE32 reg8; + PHY_LE32 reg9; + PHY_LE32 rega; + PHY_LE32 regb; + //0x30 + PHY_LE32 regc; + PHY_LE32 regd; + PHY_LE32 rege; +}; + +//U3D_reg0 +#define RG_SSUSB_BGR_EN (0x1<<31) //31:31 +#define RG_SSUSB_CHPEN (0x1<<30) //30:30 +#define RG_SSUSB_BG_DIV (0x3<<28) //29:28 +#define RG_SSUSB_INTR_EN (0x1<<26) //26:26 +#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24 +#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16 +#define RG_SSUSB_REF_EN (0x1<<15) //15:15 +#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11 +#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9 +#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7 +#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6 +#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0 + +//U3D_reg1 +#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30 +#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27 +#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26 +#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25 +#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24 +#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8 +#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4 +#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2 +#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0 + +//U3D_reg2 +#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31 +#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24 +#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22 +#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21 +#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20 +#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19 +#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18 +#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17 +#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14 +#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13 +#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12 +#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11 +#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10 +#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9 +#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8 + +//U3D_reg3 +#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16 + +//U3D_reg4 +#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1 + +//U3D_reg5 +#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29 +#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28 +#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27 +#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26 +#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25 +#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24 +#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23 +#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22 +#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21 +#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20 +#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0 + +//U3D_reg6 +#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31 +#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30 +#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24 +#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23 +#define RG_SSUSB_TX_SR (0x7<<20) //22:20 +#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16 +#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14 +#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12 +#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11 +#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8 +#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7 +#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6 +#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5 +#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4 + +//U3D_reg7 +#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12 +#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10 +#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8 +#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7 +#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6 +#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5 +#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4 +#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3 +#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2 +#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1 +#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0 + +//U3D_reg8 +#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0 + +//U3D_reg9 +#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16 +#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0 + +//U3D_regA +#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31 +#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30 +#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29 +#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28 +#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21 +#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20 +#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17 +#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16 +#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15 +#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14 +#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13 +#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12 +#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11 +#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9 +#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8 +#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6 +#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4 +#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3 +#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2 +#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1 +#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0 + +//U3D_regB +#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31 +#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29 +#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26 +#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25 +#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24 +#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19 +#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18 +#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17 +#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14 +#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12 +#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7 +#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5 +#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3 +#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2 + +//U3D_regC +#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28 +#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16 +#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8 +#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0 + +//U3D_redD +#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8 +#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0 + +//U3D_regE +#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4 +#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3 +#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2 +#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1 +#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0 + + +/* OFFSET */ + +//U3D_reg0 +#define RG_SSUSB_BGR_EN_OFST (31) +#define RG_SSUSB_CHPEN_OFST (30) +#define RG_SSUSB_BG_DIV_OFST (28) +#define RG_SSUSB_INTR_EN_OFST (26) +#define RG_SSUSB_MPX_OUT_SEL_OFST (24) +#define RG_SSUSB_MPX_SEL_OFST (16) +#define RG_SSUSB_REF_EN_OFST (15) +#define RG_SSUSB_VRT_VREF_SEL_OFST (11) +#define RG_SSUSB_BG_RASEL_OFST (9) +#define RG_SSUSB_BG_RBSEL_OFST (7) +#define RG_SSUSB_BG_MONEN_OFST (6) +#define RG_PCIE_CLKDRV_OFFSET_OFST (0) + +//U3D_reg1 +#define RG_PCIE_CLKDRV_SLEW_OFST (30) +#define RG_PCIE_CLKDRV_AMP_OFST (27) +#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26) +#define RG_SSUSB_XTAL_MON_EN_OFST (25) +#define RG_SSUSB_XTAL_HYS_OFST (24) +#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8) +#define RG_SSUSB_SYSPLL_RESERVE_OFST (4) +#define RG_SSUSB_SYSPLL_FBSEL_OFST (2) +#define RG_SSUSB_SYSPLL_PREDIV_OFST (0) + +//U3D_reg2 +#define RG_SSUSB_SYSPLL_LF_OFST (31) +#define RG_SSUSB_SYSPLL_FBDIV_OFST (24) +#define RG_SSUSB_SYSPLL_POSDIV_OFST (22) +#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21) +#define RG_SSUSB_SYSPLL_BLP_OFST (20) +#define RG_SSUSB_SYSPLL_BP_OFST (19) +#define RG_SSUSB_SYSPLL_BR_OFST (18) +#define RG_SSUSB_SYSPLL_BC_OFST (17) +#define RG_SSUSB_SYSPLL_DIVEN_OFST (14) +#define RG_SSUSB_SYSPLL_FPEN_OFST (13) +#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12) +#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11) +#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10) +#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9) +#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8) + +//U3D_reg3 +#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16) + +//U3D_reg4 +#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1) + +//U3D_reg5 +#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29) +#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28) +#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27) +#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26) +#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25) +#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24) +#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23) +#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22) +#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21) +#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20) +#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0) + +//U3D_reg6 +#define RG_SSUSB_TX250MCK_INVB_OFST (31) +#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30) +#define RG_SSUSB_IDRV_CALIB_OFST (24) +#define RG_SSUSB_TX_R50_FON_OFST (23) +#define RG_SSUSB_TX_SR_OFST (20) +#define RG_SSUSB_TX_EIDLE_CM_OFST (16) +#define RG_SSUSB_RXDET_RSEL_OFST (14) +#define RG_SSUSB_RXDET_VTHSEL_OFST (12) +#define RG_SSUSB_CKMON_EN_OFST (11) +#define RG_SSUSB_CKMON_SEL_OFST (8) +#define RG_SSUSB_TX_VLMON_EN_OFST (7) +#define RG_SSUSB_TX_VLMON_SEL_OFST (6) +#define RG_SSUSB_RXLBTX_EN_OFST (5) +#define RG_SSUSB_TXLBRX_EN_OFST (4) + +//U3D_reg7 +#define RG_SSUSB_RESERVE_OFST (12) +#define RG_SSUSB_PLL_CKCTRL_OFST (10) +#define RG_SSUSB_PLL_POSDIV_OFST (8) +#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7) +#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6) +#define RG_SSUSB_PLL_EP_EN_OFST (5) +#define RG_SSUSB_PLL_VOD_EN_OFST (4) +#define RG_SSUSB_PLL_V11_EN_OFST (3) +#define RG_SSUSB_PLL_MONREF_EN_OFST (2) +#define RG_SSUSB_PLL_MONCK_EN_OFST (1) +#define RG_SSUSB_PLL_MONVC_EN_OFST (0) + +//U3D_reg8 +#define RG_SSUSB_PLL_RESERVE_OFST (0) + +//U3D_reg9 +#define RG_SSUSB_PLL_DDS_DMY_OFST (16) +#define RG_SSUSB_PLL_SSC_PRD_OFST (0) + +//U3D_regA +#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31) +#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30) +#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29) +#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28) +#define RG_SSUSB_PLL_DDS_VADJ_OFST (21) +#define RG_SSUSB_PLL_DDS_MONEN_OFST (20) +#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17) +#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16) +#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15) +#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14) +#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13) +#define RG_SSUSB_CDR_OSCDET_EN_OFST (12) +#define RG_SSUSB_CDR_MONMUX_OFST (11) +#define RG_SSUSB_CDR_CKCTRL_OFST (9) +#define RG_SSUSB_CDR_ACCEN_OFST (8) +#define RG_SSUSB_CDR_BYPASS_OFST (6) +#define RG_SSUSB_CDR_PI_SLEW_OFST (4) +#define RG_SSUSB_CDR_EPEN_OFST (3) +#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2) +#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1) +#define RG_SSUSB_CDR_MONEN_OFST (0) + +//U3D_regB +#define RG_SSUSB_CDR_MONEN_DIG_OFST (31) +#define RG_SSUSB_CDR_REGOD_OFST (29) +#define RG_SSUSB_RX_DAC_EN_OFST (26) +#define RG_SSUSB_RX_DAC_PWD_OFST (25) +#define RG_SSUSB_EQ_CURSEL_OFST (24) +#define RG_SSUSB_RX_DAC_MUX_OFST (19) +#define RG_SSUSB_RX_R2T_EN_OFST (18) +#define RG_SSUSB_RX_T2R_EN_OFST (17) +#define RG_SSUSB_RX_50_LOWER_OFST (14) +#define RG_SSUSB_RX_50_TAR_OFST (12) +#define RG_SSUSB_RX_SW_CTRL_OFST (7) +#define RG_PCIE_SIGDET_VTH_OFST (5) +#define RG_PCIE_SIGDET_LPF_OFST (3) +#define RG_SSUSB_LFPS_MON_EN_OFST (2) + +//U3D_regC +#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28) +#define RG_SSUSB_CDR_RESERVE_OFST (16) +#define RG_SSUSB_RXAFE_RESERVE_OFST (8) +#define RG_PCIE_RX_RESERVE_OFST (0) + +//U3D_redD +#define RGS_SSUSB_CDR_NO_OSC_OFST (8) +#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0) + +//U3D_regE +#define RG_SSUSB_INT_BIAS_SEL_OFST (4) +#define RG_SSUSB_EXT_BIAS_SEL_OFST (3) +#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2) +#define RG_SSUSB_RX_PD_RST_OFST (1) +#define RG_SSUSB_RX_PD_RST_PASS_OFST (0) + +/////////////////////////////////////////////////////////////////////////////// + +struct u3phya_da_reg { + //0x0 + PHY_LE32 reg0; + PHY_LE32 reg1; + PHY_LE32 reg4; + PHY_LE32 reg5; + //0x10 + PHY_LE32 reg6; + PHY_LE32 reg7; + PHY_LE32 reg8; + PHY_LE32 reg9; + //0x20 + PHY_LE32 reg10; + PHY_LE32 reg12; + PHY_LE32 reg13; + PHY_LE32 reg14; + //0x30 + PHY_LE32 reg15; + PHY_LE32 reg16; + PHY_LE32 reg19; + PHY_LE32 reg20; + //0x40 + PHY_LE32 reg21; + PHY_LE32 reg23; + PHY_LE32 reg25; + PHY_LE32 reg26; + //0x50 + PHY_LE32 reg28; + PHY_LE32 reg29; + PHY_LE32 reg30; + PHY_LE32 reg31; + //0x60 + PHY_LE32 reg32; + PHY_LE32 reg33; +}; + +//U3D_reg0 +#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24 +#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23 +#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22 +#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21 +#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20 +#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18 +#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16 +#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14 +#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12 +#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10 +#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8 +#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6 +#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4 +#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2 +#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0 + +//U3D_reg1 +#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30 +#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29 +#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28 +#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27 +#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26 +#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25 +#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24 +#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18 +#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17 +#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16 +#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8 +#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3 +#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2 +#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1 +#define RG_PCIE_MODE_U3 (0x1<<0) //0:0 + +//U3D_reg4 +#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22 +#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19 +#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16 +#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13 +#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10 +#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8 +#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6 +#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4 +#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2 +#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0 + +//U3D_reg5 +#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27 +#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24 +#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21 +#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18 +#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15 +#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12 +#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9 +#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6 +#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3 +#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0 + +//U3D_reg6 +#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24 +#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16 +#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8 +#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4 +#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0 + +//U3D_reg7 +#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24 +#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16 +#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8 +#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4 +#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0 + +//U3D_reg8 +#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24 +#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16 +#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8 +#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2 +#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0 + +//U3D_reg9 +#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24 +#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16 +#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8 +#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0 + +//U3D_reg10 +#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26 +#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24 +#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18 +#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16 +#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8 +#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0 + +//U3D_reg12 +#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0 + +//U3D_reg13 +#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0 + +//U3D_reg14 +#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0 + +//U3D_reg15 +#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0 + +//U3D_reg16 +#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0 + +//U3D_reg19 +#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16 +#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0 + +//U3D_reg20 +#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16 +#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0 + +//U3D_reg21 +#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16 +#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0 + +//U3D_reg23 +#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16 +#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0 + +//U3D_reg25 +#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16 +#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0 + +//U3D_reg26 +#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25 +#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24 +#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16 +#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8 +#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0 + +//U3D_reg28 +#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24 +#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16 +#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10 +#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8 +#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0 + +//U3D_reg29 +#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24 +#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16 +#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6 +#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3 +#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0 + +//U3D_reg30 +#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24 +#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16 +#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6 +#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3 +#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0 + +//U3D_reg31 +#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24 +#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16 +#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8 +#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0 + +//U3D_reg32 +#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30 +#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28 +#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26 +#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24 +#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22 +#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20 +#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18 +#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16 +#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14 +#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12 +#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11 +#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10 +#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9 +#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8 +#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7 +#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0 + +//U3D_reg33 +#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26 +#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25 +#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24 +#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23 +#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16 +#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8 +#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6 +#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4 +#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2 +#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0 + + +/* OFFSET */ + +//U3D_reg0 +#define RG_PCIE_SPEED_PE2D_OFST (24) +#define RG_PCIE_SPEED_PE2H_OFST (23) +#define RG_PCIE_SPEED_PE1D_OFST (22) +#define RG_PCIE_SPEED_PE1H_OFST (21) +#define RG_PCIE_SPEED_U3_OFST (20) +#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18) +#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16) +#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14) +#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12) +#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10) +#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8) +#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6) +#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4) +#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2) +#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0) + +//U3D_reg1 +#define RG_USB20_REFCK_SEL_PE2D_OFST (30) +#define RG_USB20_REFCK_SEL_PE2H_OFST (29) +#define RG_USB20_REFCK_SEL_PE1D_OFST (28) +#define RG_USB20_REFCK_SEL_PE1H_OFST (27) +#define RG_USB20_REFCK_SEL_U3_OFST (26) +#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25) +#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24) +#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18) +#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17) +#define RG_PCIE_REFCK_DIV4_U3_OFST (16) +#define RG_PCIE_MODE_PE2D_OFST (8) +#define RG_PCIE_MODE_PE2H_OFST (3) +#define RG_PCIE_MODE_PE1D_OFST (2) +#define RG_PCIE_MODE_PE1H_OFST (1) +#define RG_PCIE_MODE_U3_OFST (0) + +//U3D_reg4 +#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22) +#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19) +#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16) +#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13) +#define RG_SSUSB_PLL_DIVEN_U3_OFST (10) +#define RG_SSUSB_PLL_BC_PE2D_OFST (8) +#define RG_SSUSB_PLL_BC_PE2H_OFST (6) +#define RG_SSUSB_PLL_BC_PE1D_OFST (4) +#define RG_SSUSB_PLL_BC_PE1H_OFST (2) +#define RG_SSUSB_PLL_BC_U3_OFST (0) + +//U3D_reg5 +#define RG_SSUSB_PLL_BR_PE2D_OFST (27) +#define RG_SSUSB_PLL_BR_PE2H_OFST (24) +#define RG_SSUSB_PLL_BR_PE1D_OFST (21) +#define RG_SSUSB_PLL_BR_PE1H_OFST (18) +#define RG_SSUSB_PLL_BR_U3_OFST (15) +#define RG_SSUSB_PLL_IC_PE2D_OFST (12) +#define RG_SSUSB_PLL_IC_PE2H_OFST (9) +#define RG_SSUSB_PLL_IC_PE1D_OFST (6) +#define RG_SSUSB_PLL_IC_PE1H_OFST (3) +#define RG_SSUSB_PLL_IC_U3_OFST (0) + +//U3D_reg6 +#define RG_SSUSB_PLL_IR_PE2D_OFST (24) +#define RG_SSUSB_PLL_IR_PE2H_OFST (16) +#define RG_SSUSB_PLL_IR_PE1D_OFST (8) +#define RG_SSUSB_PLL_IR_PE1H_OFST (4) +#define RG_SSUSB_PLL_IR_U3_OFST (0) + +//U3D_reg7 +#define RG_SSUSB_PLL_BP_PE2D_OFST (24) +#define RG_SSUSB_PLL_BP_PE2H_OFST (16) +#define RG_SSUSB_PLL_BP_PE1D_OFST (8) +#define RG_SSUSB_PLL_BP_PE1H_OFST (4) +#define RG_SSUSB_PLL_BP_U3_OFST (0) + +//U3D_reg8 +#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24) +#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16) +#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8) +#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2) +#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0) + +//U3D_reg9 +#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24) +#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16) +#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8) +#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0) + +//U3D_reg10 +#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26) +#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24) +#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18) +#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16) +#define RG_SSUSB_PLL_PREDIV_U3_OFST (8) +#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0) + +//U3D_reg12 +#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0) + +//U3D_reg13 +#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0) + +//U3D_reg14 +#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0) + +//U3D_reg15 +#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0) + +//U3D_reg16 +#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0) + +//U3D_reg19 +#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16) +#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0) + +//U3D_reg20 +#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16) +#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0) + +//U3D_reg21 +#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16) +#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0) + +//U3D_reg23 +#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16) +#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0) + +//U3D_reg25 +#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16) +#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0) + +//U3D_reg26 +#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25) +#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24) +#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16) +#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8) +#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0) + +//U3D_reg28 +#define RG_SSUSB_CDR_BPA_PE2D_OFST (24) +#define RG_SSUSB_CDR_BPA_PE2H_OFST (16) +#define RG_SSUSB_CDR_BPA_PE1D_OFST (10) +#define RG_SSUSB_CDR_BPA_PE1H_OFST (8) +#define RG_SSUSB_CDR_BPA_U3_OFST (0) + +//U3D_reg29 +#define RG_SSUSB_CDR_BPB_PE2D_OFST (24) +#define RG_SSUSB_CDR_BPB_PE2H_OFST (16) +#define RG_SSUSB_CDR_BPB_PE1D_OFST (6) +#define RG_SSUSB_CDR_BPB_PE1H_OFST (3) +#define RG_SSUSB_CDR_BPB_U3_OFST (0) + +//U3D_reg30 +#define RG_SSUSB_CDR_BR_PE2D_OFST (24) +#define RG_SSUSB_CDR_BR_PE2H_OFST (16) +#define RG_SSUSB_CDR_BR_PE1D_OFST (6) +#define RG_SSUSB_CDR_BR_PE1H_OFST (3) +#define RG_SSUSB_CDR_BR_U3_OFST (0) + +//U3D_reg31 +#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24) +#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16) +#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8) +#define RG_SSUSB_CDR_FBDIV_U3_OFST (0) + +//U3D_reg32 +#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30) +#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28) +#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26) +#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24) +#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22) +#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20) +#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18) +#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16) +#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14) +#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12) +#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11) +#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10) +#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9) +#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8) +#define RG_SSUSB_CDR_KVSEL_U3_OFST (7) +#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0) + +//U3D_reg33 +#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26) +#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25) +#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24) +#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23) +#define RG_SSUSB_RX_CMPWD_U3_OFST (16) +#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8) +#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6) +#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4) +#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2) +#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0) + + +/////////////////////////////////////////////////////////////////////////////// + +struct u3phyd_reg { + //0x0 + PHY_LE32 phyd_mix0; + PHY_LE32 phyd_mix1; + PHY_LE32 phyd_lfps0; + PHY_LE32 phyd_lfps1; + //0x10 + PHY_LE32 phyd_impcal0; + PHY_LE32 phyd_impcal1; + PHY_LE32 phyd_txpll0; + PHY_LE32 phyd_txpll1; + //0x20 + PHY_LE32 phyd_txpll2; + PHY_LE32 phyd_fl0; + PHY_LE32 phyd_mix2; + PHY_LE32 phyd_rx0; + //0x30 + PHY_LE32 phyd_t2rlb; + PHY_LE32 phyd_cppat; + PHY_LE32 phyd_mix3; + PHY_LE32 phyd_ebufctl; + //0x40 + PHY_LE32 phyd_pipe0; + PHY_LE32 phyd_pipe1; + PHY_LE32 phyd_mix4; + PHY_LE32 phyd_ckgen0; + //0x50 + PHY_LE32 phyd_mix5; + PHY_LE32 phyd_reserved; + PHY_LE32 phyd_cdr0; + PHY_LE32 phyd_cdr1; + //0x60 + PHY_LE32 phyd_pll_0; + PHY_LE32 phyd_pll_1; + PHY_LE32 phyd_bcn_det_1; + PHY_LE32 phyd_bcn_det_2; + //0x70 + PHY_LE32 eq0; + PHY_LE32 eq1; + PHY_LE32 eq2; + PHY_LE32 eq3; + //0x80 + PHY_LE32 eq_eye0; + PHY_LE32 eq_eye1; + PHY_LE32 eq_eye2; + PHY_LE32 eq_dfe0; + //0x90 + PHY_LE32 eq_dfe1; + PHY_LE32 eq_dfe2; + PHY_LE32 eq_dfe3; + PHY_LE32 reserve0; + //0xa0 + PHY_LE32 phyd_mon0; + PHY_LE32 phyd_mon1; + PHY_LE32 phyd_mon2; + PHY_LE32 phyd_mon3; + //0xb0 + PHY_LE32 phyd_mon4; + PHY_LE32 phyd_mon5; + PHY_LE32 phyd_mon6; + PHY_LE32 phyd_mon7; + //0xc0 + PHY_LE32 phya_rx_mon0; + PHY_LE32 phya_rx_mon1; + PHY_LE32 phya_rx_mon2; + PHY_LE32 phya_rx_mon3; + //0xd0 + PHY_LE32 phya_rx_mon4; + PHY_LE32 phya_rx_mon5; + PHY_LE32 phyd_cppat2; + PHY_LE32 eq_eye3; + //0xe0 + PHY_LE32 kband_out; + PHY_LE32 kband_out1; +}; + +//U3D_PHYD_MIX0 +#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31 +#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30 +#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29 +#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28 +#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27 +#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24 +#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16 +#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15 +#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14 +#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13 +#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12 +#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8 +#define RG_SSUSB_COMCNT (0xf<<4) //7:4 +#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0 + +//U3D_PHYD_MIX1 +#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31 +#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28 +#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24 +#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23 +#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22 +#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16 +#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15 +#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14 +#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8 +#define RG_SSUSB_BERT_EN (0x1<<7) //7:7 +#define RG_SSUSB_SCP_TH (0x7<<4) //6:4 +#define RG_SSUSB_SCP_EN (0x1<<3) //3:3 +#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0 + +//U3D_PHYD_LFPS0 +#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30 +#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29 +#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24 +#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23 +#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22 +#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20 +#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16 +#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15 +#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14 +#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13 +#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8 +#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7 +#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6 +#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5 +#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0 + +//U3D_PHYD_LFPS1 +#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28 +#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24 +#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16 +#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8 +#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0 + +//U3D_PHYD_IMPCAL0 +#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31 +#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30 +#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29 +#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24 +#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16 +#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10 +#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 + +//U3D_PHYD_IMPCAL1 +#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31 +#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30 +#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29 +#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24 +#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16 +#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10 +#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 + +//U3D_PHYD_TXPLL0 +#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27 +#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26 +#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25 +#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16 +#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12 +#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10 +#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0 + +//U3D_PHYD_TXPLL1 +#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31 +#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30 +#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28 +#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27 +#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26 +#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25 +#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24 +#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23 +#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22 +#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16 +#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15 +#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14 +#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13 +#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12 +#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11 +#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9 +#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8 +#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7 +#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6 +#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5 +#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4 +#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3 +#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2 + +//U3D_PHYD_TXPLL2 +#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31 +#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30 +#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29 +#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28 +#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27 +#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26 +#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25 +#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24 +#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16 +#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11 +#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10 +#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9 +#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8 +#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7 +#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6 +#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0 + +//U3D_PHYD_FL0 +#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16 +#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0 + +//U3D_PHYD_MIX2 +#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31 +#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30 +#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29 +#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24 +#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18 +#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16 +#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8 +#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0 + +//U3D_PHYD_RX0 +#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24 +#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16 +#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15 +#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14 +#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13 +#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11 +#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10 +#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9 +#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8 +#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7 +#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6 +#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5 +#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4 +#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3 +#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2 +#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1 +#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0 + +//U3D_PHYD_T2RLB +#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28 +#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27 +#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26 +#define RG_SSUSB_VALID_EN (0x1<<25) //25:25 +#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24 +#define RG_SSUSB_K_EMP (0xf<<20) //23:20 +#define RG_SSUSB_K_FUL (0xf<<16) //19:16 +#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12 +#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10 +#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8 +#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0 + +//U3D_PHYD_CPPAT +#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24 +#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21 +#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20 +#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16 +#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8 +#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0 + +//U3D_PHYD_MIX3 +#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31 +#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30 +#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28 +#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24 +#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23 +#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20 +#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19 +#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16 +#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15 +#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14 +#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13 +#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12 +#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11 +#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0 + +//U3D_PHYD_EBUFCTL +#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0 + +//U3D_PHYD_PIPE0 +#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30 +#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29 +#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28 +#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26 +#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24 +#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23 +#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22 +#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21 +#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20 +#define RG_SSUSB_TXDATAK (0xf<<16) //19:16 +#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15 +#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14 +#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13 +#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12 +#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4 +#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1 +#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0 + +//U3D_PHYD_PIPE1 +#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0 + +//U3D_PHYD_MIX4 +#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24 +#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16 +#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0 + +//U3D_PHYD_CKGEN0 +#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27 +#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24 +#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8 +#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0 + +//U3D_PHYD_MIX5 +#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16 +#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0 + +//U3D_PHYD_RESERVED +#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0 +//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11) +//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12) +//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9) +//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10) + +//U3D_PHYD_CDR0 +#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28 +#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24 +#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16 +#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8 +#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0 + +//U3D_PHYD_CDR1 +#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24 +#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16 +#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8 +#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6 +#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0 + +//U3D_PHYD_PLL_0 +#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28 +#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27 +#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26 +#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25 +#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15 +#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5 +#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4 +#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3 +#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2 +#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1 +#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0 + +//U3D_PHYD_PLL_1 +#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 +#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 +#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 +#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 + +//U3D_PHYD_BCN_DET_1 +#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16 +#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0 + +//U3D_PHYD_BCN_DET_2 +#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16 +#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12 +#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0 + +//U3D_EQ0 +#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24 +#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16 +#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8 +#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0 + +//U3D_EQ1 +#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24 +#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16 +#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8 +#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0 + +//U3D_EQ2 +#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24 +#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16 +#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14 +#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11 +#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8 +#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6 +#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3 +#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0 + +//U3D_EQ3 +#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28 +#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24 +#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16 +#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8 +#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7 +#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0 + +//U3D_EQ_EYE0 +#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25 +#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24 +#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16 +#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8 +#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7 +#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4 +#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3 + +//U3D_EQ_EYE1 +#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24 +#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7 + +//U3D_EQ_EYE2 +#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31 +#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24 +#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22 +#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16 + +//U3D_EQ_DFE0 +#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28 +#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27 +#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24 +#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23 +#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16 +#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8 +#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0 + +//U3D_EQ_DFE1 +#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16 +#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12 +#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8 +#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7 +#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6 +#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4 +#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2 +#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1 +#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0 + +//U3D_EQ_DFE2 +#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24 +#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16 +#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8 +#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0 + +//U3D_EQ_DFE3 +#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0 + +//U3D_PHYD_MON0 +#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16 +#define RGS_SSUSB_LFPS (0xf<<12) //15:12 +#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8 +#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0 + +//U3D_PHYD_MON1 +#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0 + +//U3D_PHYD_MON2 +#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16 +#define RGS_SSUSB_RETRACK (0xf<<12) //15:12 +#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10 +#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9 +#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8 +#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0 + +//U3D_PHYD_MON3 +#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16 +#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0 + +//U3D_PHYD_MON4 +#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24 +#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16 +#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0 + +//U3D_PHYD_MON5 +#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16 +#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15 +#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14 +#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13 +#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12 +#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11 +#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10 +#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9 +#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8 +#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6 +#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5 +#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4 +#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3 +#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2 +#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1 +#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0 + +//U3D_PHYD_MON6 +#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30 +#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29 +#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24 +#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16 +#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8 +#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4 +#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0 + +//U3D_PHYD_MON7 +#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8 +#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0 + +//U3D_PHYA_RX_MON0 +#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24 +#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16 +#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8 +#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0 + +//U3D_PHYA_RX_MON1 +#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24 +#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16 +#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8 +#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0 + +//U3D_PHYA_RX_MON2 +#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31 +#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24 +#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16 +#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8 +#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0 + +//U3D_PHYA_RX_MON3 +#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0 + +//U3D_PHYA_RX_MON4 +#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0 + +//U3D_PHYA_RX_MON5 +#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8 +#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7 +#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0 + +//U3D_PHYD_CPPAT2 +#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16 +#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8 +#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0 + +//U3D_EQ_EYE3 +#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24 +#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0 + +//U3D_KBAND_OUT +#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 +#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 +#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 +#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 + +//U3D_KBAND_OUT1 +#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24 +#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16 +#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8 +#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0 + + +/* OFFSET */ + +//U3D_PHYD_MIX0 +#define RG_SSUSB_P_P3_TX_NG_OFST (31) +#define RG_SSUSB_TSEQ_EN_OFST (30) +#define RG_SSUSB_TSEQ_POLEN_OFST (29) +#define RG_SSUSB_TSEQ_POL_OFST (28) +#define RG_SSUSB_P_P3_PCLK_NG_OFST (27) +#define RG_SSUSB_TSEQ_TH_OFST (24) +#define RG_SSUSB_PRBS_BERTH_OFST (16) +#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15) +#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14) +#define RG_SSUSB_PRBS_EN_OFST (13) +#define RG_SSUSB_BPSLOCK_OFST (12) +#define RG_SSUSB_RTCOMCNT_OFST (8) +#define RG_SSUSB_COMCNT_OFST (4) +#define RG_SSUSB_PRBSEL_CALIB_OFST (0) + +//U3D_PHYD_MIX1 +#define RG_SSUSB_SLEEP_EN_OFST (31) +#define RG_SSUSB_PRBSEL_PCS_OFST (28) +#define RG_SSUSB_TXLFPS_PRD_OFST (24) +#define RG_SSUSB_P_RX_P0S_CK_OFST (23) +#define RG_SSUSB_P_TX_P0S_CK_OFST (22) +#define RG_SSUSB_PDNCTL_OFST (16) +#define RG_SSUSB_TX_DRV_EN_OFST (15) +#define RG_SSUSB_TX_DRV_SEL_OFST (14) +#define RG_SSUSB_TX_DRV_DLY_OFST (8) +#define RG_SSUSB_BERT_EN_OFST (7) +#define RG_SSUSB_SCP_TH_OFST (4) +#define RG_SSUSB_SCP_EN_OFST (3) +#define RG_SSUSB_RXANSIDEC_TEST_OFST (0) + +//U3D_PHYD_LFPS0 +#define RG_SSUSB_LFPS_PWD_OFST (30) +#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29) +#define RG_SSUSB_RXLFPS_OVF_OFST (24) +#define RG_SSUSB_P3_ENTRY_SEL_OFST (23) +#define RG_SSUSB_P3_ENTRY_OFST (22) +#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20) +#define RG_SSUSB_RXLFPS_CDRTH_OFST (16) +#define RG_SSUSB_LOCK5G_BLOCK_OFST (15) +#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14) +#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13) +#define RG_SSUSB_RXLFPS_LOB_OFST (8) +#define RG_SSUSB_TXLFPS_EN_OFST (7) +#define RG_SSUSB_TXLFPS_SEL_OFST (6) +#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5) +#define RG_SSUSB_RXLFPS_UPB_OFST (0) + +//U3D_PHYD_LFPS1 +#define RG_SSUSB_RX_IMP_BIAS_OFST (28) +#define RG_SSUSB_TX_IMP_BIAS_OFST (24) +#define RG_SSUSB_FWAKE_TH_OFST (16) +#define RG_SSUSB_RXLFPS_UDF_OFST (8) +#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0) + +//U3D_PHYD_IMPCAL0 +#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31) +#define RG_SSUSB_TX_IMPCAL_EN_OFST (30) +#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29) +#define RG_SSUSB_TX_IMPSEL_OFST (24) +#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16) +#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10) +#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0) + +//U3D_PHYD_IMPCAL1 +#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31) +#define RG_SSUSB_RX_IMPCAL_EN_OFST (30) +#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29) +#define RG_SSUSB_RX_IMPSEL_OFST (24) +#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16) +#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10) +#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0) + +//U3D_PHYD_TXPLL0 +#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27) +#define RG_SSUSB_TXPLL_ON_OFST (26) +#define RG_SSUSB_FORCE_TXPLLON_OFST (25) +#define RG_SSUSB_TXPLL_STBCYC_OFST (16) +#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12) +#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10) +#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0) + +//U3D_PHYD_TXPLL1 +#define RG_SSUSB_PLL_NCPO_EN_OFST (31) +#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30) +#define RG_SSUSB_PLL_NCPO_CHG_OFST (28) +#define RG_SSUSB_PLL_DDS_RSTB_OFST (27) +#define RG_SSUSB_PLL_DDS_PWDB_OFST (26) +#define RG_SSUSB_PLL_DDSEN_OFST (25) +#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24) +#define RG_SSUSB_PLL_PWD_OFST (23) +#define RG_SSUSB_RX_AFE_PWD_OFST (22) +#define RG_SSUSB_PLL_TCADJ_OFST (16) +#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15) +#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14) +#define RG_SSUSB_FORCE_CDR_PWD_OFST (13) +#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12) +#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11) +#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9) +#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8) +#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7) +#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6) +#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5) +#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4) +#define RG_SSUSB_FORCE_PLL_PWD_OFST (3) +#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2) + +//U3D_PHYD_TXPLL2 +#define RG_SSUSB_TX_LFPS_EN_OFST (31) +#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30) +#define RG_SSUSB_TX_LFPS_OFST (29) +#define RG_SSUSB_FORCE_TX_LFPS_OFST (28) +#define RG_SSUSB_RXPLL_STB_OFST (27) +#define RG_SSUSB_TXPLL_STB_OFST (26) +#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25) +#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24) +#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16) +#define RG_SSUSB_RXPLL_STBMODE_OFST (11) +#define RG_SSUSB_RXPLL_ON_OFST (10) +#define RG_SSUSB_FORCE_RXPLLON_OFST (9) +#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8) +#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7) +#define RG_SSUSB_CDR_PWD_OFST (6) +#define RG_SSUSB_CDR_TCADJ_OFST (0) + +//U3D_PHYD_FL0 +#define RG_SSUSB_RX_FL_TARGET_OFST (16) +#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0) + +//U3D_PHYD_MIX2 +#define RG_SSUSB_RX_EQ_RST_OFST (31) +#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30) +#define RG_SSUSB_RXVAL_RST_OFST (29) +#define RG_SSUSB_RXVAL_CNT_OFST (24) +#define RG_SSUSB_CDROS_EN_OFST (18) +#define RG_SSUSB_CDR_LCKOP_OFST (16) +#define RG_SSUSB_RX_FL_LOCKTH_OFST (8) +#define RG_SSUSB_RX_FL_OFFSET_OFST (0) + +//U3D_PHYD_RX0 +#define RG_SSUSB_T2RLB_BERTH_OFST (24) +#define RG_SSUSB_T2RLB_PAT_OFST (16) +#define RG_SSUSB_T2RLB_EN_OFST (15) +#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14) +#define RG_SSUSB_T2RLB_SERIAL_OFST (13) +#define RG_SSUSB_T2RLB_MODE_OFST (11) +#define RG_SSUSB_RX_SAOSC_EN_OFST (10) +#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9) +#define RG_SSUSB_RX_DFE_OPTION_OFST (8) +#define RG_SSUSB_RX_DFE_EN_OFST (7) +#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6) +#define RG_SSUSB_RX_EQ_EN_OFST (5) +#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4) +#define RG_SSUSB_RX_SAOSC_RST_OFST (3) +#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2) +#define RG_SSUSB_RX_DFE_RST_OFST (1) +#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0) + +//U3D_PHYD_T2RLB +#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28) +#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27) +#define RG_SSUSB_BPANSIENC_OFST (26) +#define RG_SSUSB_VALID_EN_OFST (25) +#define RG_SSUSB_EBUF_SRST_OFST (24) +#define RG_SSUSB_K_EMP_OFST (20) +#define RG_SSUSB_K_FUL_OFST (16) +#define RG_SSUSB_T2RLB_BDATRST_OFST (12) +#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10) +#define RG_SSUSB_T2RLB_PATMODE_OFST (8) +#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0) + +//U3D_PHYD_CPPAT +#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24) +#define RG_SSUSB_CPPAT_TOZ_OFST (21) +#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20) +#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16) +#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8) +#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0) + +//U3D_PHYD_MIX3 +#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31) +#define RG_SSUSB_P_CDROS_EN_OFST (30) +#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28) +#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24) +#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23) +#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20) +#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19) +#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16) +#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15) +#define RG_SSUSB_PLL_SSCEN_OFST (14) +#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13) +#define RG_SSUSB_CDR_PI_PWD_OFST (12) +#define RG_SSUSB_CDR_PI_MODE_OFST (11) +#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0) + +//U3D_PHYD_EBUFCTL +#define RG_SSUSB_EBUFCTL_OFST (0) + +//U3D_PHYD_PIPE0 +#define RG_SSUSB_RXTERMINATION_OFST (30) +#define RG_SSUSB_RXEQTRAINING_OFST (29) +#define RG_SSUSB_RXPOLARITY_OFST (28) +#define RG_SSUSB_TXDEEMPH_OFST (26) +#define RG_SSUSB_POWERDOWN_OFST (24) +#define RG_SSUSB_TXONESZEROS_OFST (23) +#define RG_SSUSB_TXELECIDLE_OFST (22) +#define RG_SSUSB_TXDETECTRX_OFST (21) +#define RG_SSUSB_PIPE_SEL_OFST (20) +#define RG_SSUSB_TXDATAK_OFST (16) +#define RG_SSUSB_CDR_STABLE_SEL_OFST (15) +#define RG_SSUSB_CDR_STABLE_OFST (14) +#define RG_SSUSB_CDR_RSTB_SEL_OFST (13) +#define RG_SSUSB_CDR_RSTB_OFST (12) +#define RG_SSUSB_P_ERROR_SEL_OFST (4) +#define RG_SSUSB_TXMARGIN_OFST (1) +#define RG_SSUSB_TXCOMPLIANCE_OFST (0) + +//U3D_PHYD_PIPE1 +#define RG_SSUSB_TXDATA_OFST (0) + +//U3D_PHYD_MIX4 +#define RG_SSUSB_CDROS_CNT_OFST (24) +#define RG_SSUSB_T2RLB_BER_EN_OFST (16) +#define RG_SSUSB_T2RLB_BER_RATE_OFST (0) + +//U3D_PHYD_CKGEN0 +#define RG_SSUSB_RFIFO_IMPLAT_OFST (27) +#define RG_SSUSB_TFIFO_PSEL_OFST (24) +#define RG_SSUSB_CKGEN_PSEL_OFST (8) +#define RG_SSUSB_RXCK_INV_OFST (0) + +//U3D_PHYD_MIX5 +#define RG_SSUSB_PRB_SEL_OFST (16) +#define RG_SSUSB_RXPLL_STBCYC_OFST (0) + +//U3D_PHYD_RESERVED +#define RG_SSUSB_PHYD_RESERVE_OFST (0) +//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11) +//#define RG_SSUSB_RX_SIGDET_EN_OFST (12) +//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9) +//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10) + +//U3D_PHYD_CDR0 +#define RG_SSUSB_CDR_BIC_LTR_OFST (28) +#define RG_SSUSB_CDR_BIC_LTD0_OFST (24) +#define RG_SSUSB_CDR_BC_LTD1_OFST (16) +#define RG_SSUSB_CDR_BC_LTR_OFST (8) +#define RG_SSUSB_CDR_BC_LTD0_OFST (0) + +//U3D_PHYD_CDR1 +#define RG_SSUSB_CDR_BIR_LTD1_OFST (24) +#define RG_SSUSB_CDR_BIR_LTR_OFST (16) +#define RG_SSUSB_CDR_BIR_LTD0_OFST (8) +#define RG_SSUSB_CDR_BW_SEL_OFST (6) +#define RG_SSUSB_CDR_BIC_LTD1_OFST (0) + +//U3D_PHYD_PLL_0 +#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28) +#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27) +#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26) +#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25) +#define RG_SSUSB_P_EQ_T_SEL_OFST (15) +#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5) +#define RG_SSUSB_PLLBAND_RECAL_OFST (4) +#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3) +#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2) +#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1) +#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0) + +//U3D_PHYD_PLL_1 +#define RG_SSUSB_CDR_BAND_5G_OFST (24) +#define RG_SSUSB_CDR_BAND_2P5G_OFST (16) +#define RG_SSUSB_PLL_BAND_5G_OFST (8) +#define RG_SSUSB_PLL_BAND_2P5G_OFST (0) + +//U3D_PHYD_BCN_DET_1 +#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16) +#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0) + +//U3D_PHYD_BCN_DET_2 +#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16) +#define RG_SSUSB_BCN_DET_DIS_OFST (12) +#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0) + +//U3D_EQ0 +#define RG_SSUSB_EQ_DLHL_LFI_OFST (24) +#define RG_SSUSB_EQ_DHHL_LFI_OFST (16) +#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8) +#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0) + +//U3D_EQ1 +#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24) +#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16) +#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8) +#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0) + +//U3D_EQ2 +#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24) +#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16) +#define RG_SSUSB_EQ_STOPTIME_OFST (14) +#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11) +#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8) +#define RG_SSUSB_EQ_STARTTIME_OFST (6) +#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3) +#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0) + +//U3D_EQ3 +#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28) +#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24) +#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16) +#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8) +#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7) +#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0) + +//U3D_EQ_EYE0 +#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25) +#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24) +#define RG_SSUSB_EQ_EYE0_Y_OFST (16) +#define RG_SSUSB_EQ_EYE1_Y_OFST (8) +#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7) +#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4) +#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3) + +//U3D_EQ_EYE1 +#define RG_SSUSB_EQ_SIGDET_OFST (24) +#define RG_SSUSB_EQ_EYE_MASK_OFST (7) + +//U3D_EQ_EYE2 +#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31) +#define RG_SSUSB_EQ_SD_CNT1_OFST (24) +#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22) +#define RG_SSUSB_EQ_SD_CNT0_OFST (16) + +//U3D_EQ_DFE0 +#define RG_SSUSB_EQ_LEQMAX_OFST (28) +#define RG_SSUSB_EQ_DFEX_EN_OFST (27) +#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24) +#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23) +#define RG_SSUSB_EQ_PIEYE_INI_OFST (16) +#define RG_SSUSB_EQ_PI90_INI_OFST (8) +#define RG_SSUSB_EQ_PI0_INI_OFST (0) + +//U3D_EQ_DFE1 +#define RG_SSUSB_EQ_REV_OFST (16) +#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12) +#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8) +#define RG_SSUSB_EQ_DFEX_RST_OFST (7) +#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6) +#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4) +#define RG_SSUSB_EQ_DFEX_DIS_OFST (2) +#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1) +#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0) + +//U3D_EQ_DFE2 +#define RG_SSUSB_EQ_MON_SEL_OFST (24) +#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16) +#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8) +#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0) + +//U3D_EQ_DFE3 +#define RG_SSUSB_EQ_RESERVED_OFST (0) + +//U3D_PHYD_MON0 +#define RGS_SSUSB_BERT_BERC_OFST (16) +#define RGS_SSUSB_LFPS_OFST (12) +#define RGS_SSUSB_TRAINDEC_OFST (8) +#define RGS_SSUSB_SCP_PAT_OFST (0) + +//U3D_PHYD_MON1 +#define RGS_SSUSB_RX_FL_OUT_OFST (0) + +//U3D_PHYD_MON2 +#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16) +#define RGS_SSUSB_RETRACK_OFST (12) +#define RGS_SSUSB_RXPLL_LOCK_OFST (10) +#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9) +#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8) +#define RGS_SSUSB_PDNCTL_OFST (0) + +//U3D_PHYD_MON3 +#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16) +#define RGS_SSUSB_PRBS_ERRCNT_OFST (0) + +//U3D_PHYD_MON4 +#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24) +#define RGS_SSUSB_SCP_DETCNT_OFST (16) +#define RGS_SSUSB_TSEQ_DETCNT_OFST (0) + +//U3D_PHYD_MON5 +#define RGS_SSUSB_EBUFMSG_OFST (16) +#define RGS_SSUSB_BERT_LOCK_OFST (15) +#define RGS_SSUSB_SCP_DET_OFST (14) +#define RGS_SSUSB_TSEQ_DET_OFST (13) +#define RGS_SSUSB_EBUF_UDF_OFST (12) +#define RGS_SSUSB_EBUF_OVF_OFST (11) +#define RGS_SSUSB_PRBS_PASSTH_OFST (10) +#define RGS_SSUSB_PRBS_PASS_OFST (9) +#define RGS_SSUSB_PRBS_LOCK_OFST (8) +#define RGS_SSUSB_T2RLB_ERR_OFST (6) +#define RGS_SSUSB_T2RLB_PASSTH_OFST (5) +#define RGS_SSUSB_T2RLB_PASS_OFST (4) +#define RGS_SSUSB_T2RLB_LOCK_OFST (3) +#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2) +#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1) +#define RGS_SSUSB_RXDETECTED_OFST (0) + +//U3D_PHYD_MON6 +#define RGS_SSUSB_SIGCAL_DONE_OFST (30) +#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29) +#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24) +#define RGS_SSUSB_RX_IMP_SEL_OFST (16) +#define RGS_SSUSB_TX_IMP_SEL_OFST (8) +#define RGS_SSUSB_TFIFO_MSG_OFST (4) +#define RGS_SSUSB_RFIFO_MSG_OFST (0) + +//U3D_PHYD_MON7 +#define RGS_SSUSB_FT_OUT_OFST (8) +#define RGS_SSUSB_PRB_OUT_OFST (0) + +//U3D_PHYA_RX_MON0 +#define RGS_SSUSB_EQ_DCLEQ_OFST (24) +#define RGS_SSUSB_EQ_DCD0H_OFST (16) +#define RGS_SSUSB_EQ_DCD0L_OFST (8) +#define RGS_SSUSB_EQ_DCD1H_OFST (0) + +//U3D_PHYA_RX_MON1 +#define RGS_SSUSB_EQ_DCD1L_OFST (24) +#define RGS_SSUSB_EQ_DCE0_OFST (16) +#define RGS_SSUSB_EQ_DCE1_OFST (8) +#define RGS_SSUSB_EQ_DCHHL_OFST (0) + +//U3D_PHYA_RX_MON2 +#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31) +#define RGS_SSUSB_EQ_DCLHL_OFST (24) +#define RGS_SSUSB_EQ_STATUS_OFST (16) +#define RGS_SSUSB_EQ_DCEYE0_OFST (8) +#define RGS_SSUSB_EQ_DCEYE1_OFST (0) + +//U3D_PHYA_RX_MON3 +#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0) + +//U3D_PHYA_RX_MON4 +#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0) + +//U3D_PHYA_RX_MON5 +#define RGS_SSUSB_EQ_DCLEQOS_OFST (8) +#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7) +#define RGS_SSUSB_EQ_PILPO_OFST (0) + +//U3D_PHYD_CPPAT2 +#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16) +#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8) +#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0) + +//U3D_EQ_EYE3 +#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24) +#define RG_SSUSB_EQ_EYE_CNT_OFST (0) + +//U3D_KBAND_OUT +#define RGS_SSUSB_CDR_BAND_5G_OFST (24) +#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16) +#define RGS_SSUSB_PLL_BAND_5G_OFST (8) +#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0) + +//U3D_KBAND_OUT1 +#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24) +#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16) +#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8) +#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0) + + +/////////////////////////////////////////////////////////////////////////////// + +struct u3phyd_bank2_reg { + //0x0 + PHY_LE32 b2_phyd_top1; + PHY_LE32 b2_phyd_top2; + PHY_LE32 b2_phyd_top3; + PHY_LE32 b2_phyd_top4; + //0x10 + PHY_LE32 b2_phyd_top5; + PHY_LE32 b2_phyd_top6; + PHY_LE32 b2_phyd_top7; + PHY_LE32 b2_phyd_p_sigdet1; + //0x20 + PHY_LE32 b2_phyd_p_sigdet2; + PHY_LE32 b2_phyd_p_sigdet_cal1; + PHY_LE32 b2_phyd_rxdet1; + PHY_LE32 b2_phyd_rxdet2; + //0x30 + PHY_LE32 b2_phyd_misc0; + PHY_LE32 b2_phyd_misc2; + PHY_LE32 b2_phyd_misc3; + PHY_LE32 reserve0; + //0x40 + PHY_LE32 b2_rosc_0; + PHY_LE32 b2_rosc_1; + PHY_LE32 b2_rosc_2; + PHY_LE32 b2_rosc_3; + //0x50 + PHY_LE32 b2_rosc_4; + PHY_LE32 b2_rosc_5; + PHY_LE32 b2_rosc_6; + PHY_LE32 b2_rosc_7; + //0x60 + PHY_LE32 b2_rosc_8; + PHY_LE32 b2_rosc_9; + PHY_LE32 b2_rosc_a; + PHY_LE32 reserve1; + //0x70~0xd0 + PHY_LE32 reserve2[28]; + //0xe0 + PHY_LE32 phyd_version; + PHY_LE32 phyd_model; +}; + +//U3D_B2_PHYD_TOP1 +#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28 +#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24 +#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17 +#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16 +#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15 +#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14 +#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13 +#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12 +#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11 +#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10 +#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9 +#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8 +#define RG_SSUSB_RATE (0x1<<6) //6:6 +#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5 +#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4 +#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3 +#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1 +#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0 + +//U3D_B2_PHYD_TOP2 +#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30 +#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24 +#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22 +#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16 +#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14 +#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8 +#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6 +#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0 + +//U3D_B2_PHYD_TOP3 +#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25 +#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24 +#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16 +#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13 +#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8 +#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0 + +//U3D_B2_PHYD_TOP4 +#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28 +#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24 +#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16 +#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8 +#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0 + +//U3D_B2_PHYD_TOP5 +#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24 +#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16 +#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8 +#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0 + +//U3D_B2_PHYD_TOP6 +#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28 +#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24 +#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16 +#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8 +#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0 + +//U3D_B2_PHYD_TOP7 +#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24 +#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16 +#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8 +#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0 + +//U3D_B2_PHYD_P_SIGDET1 +#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31 +#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24 +#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16 +#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8 +#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0 + +//U3D_B2_PHYD_P_SIGDET2 +#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29 +#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28 +#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27 +#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25 +#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24 +#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16 +#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10 +#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8 +#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6 +#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5 +#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4 +#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2 +#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0 + +//U3D_B2_PHYD_P_SIGDET_CAL1 +#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24 +#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16 +#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8 +#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3 +#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2 +#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1 +#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0 + +//U3D_B2_PHYD_RXDET1 +#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31 +#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30 +#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29 +#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28 +#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27 +#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18 +#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9 +#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0 + +//U3D_B2_PHYD_RXDET2 +#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31 +#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30 +#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29 +#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18 +#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9 +#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0 + +//U3D_B2_PHYD_MISC0 +#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22 +#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21 +#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20 +#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16 +#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15 +#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14 +#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13 +#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12 +#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11 +#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10 +#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8 +#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5 +#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4 +#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2 +#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1 +#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0 + +//U3D_B2_PHYD_MISC2 +#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31 +#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27 +#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26 +#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25 +#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24 +#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23 +#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22 +#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13 +#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7 +#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1 +#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0 + +//U3D_B2_PHYD_MISC3 +#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16 +#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0 + +//U3D_B2_ROSC_0 +#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23 +#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16 +#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3 +#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2 +#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1 +#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0 + +//U3D_B2_ROSC_1 +#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20 +#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19 +#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17 +#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16 +#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8 +#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0 + +//U3D_B2_ROSC_2 +#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16 +#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0 + +//U3D_B2_ROSC_3 +#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16 +#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0 + +//U3D_B2_ROSC_4 +#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16 +#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0 + +//U3D_B2_ROSC_5 +#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16 +#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0 + +//U3D_B2_ROSC_6 +#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16 +#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0 + +//U3D_B2_ROSC_7 +#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16 +#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0 + +//U3D_B2_ROSC_8 +#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16 +#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2 +#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1 +#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0 + +//U3D_B2_ROSC_9 +#define RGS_FM_RING_CNT (0xffff<<16) //31:16 +#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10 +#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9 +#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8 +#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0 + +//U3D_B2_ROSC_A +#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0 + +//U3D_PHYD_VERSION +#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0 + +//U3D_PHYD_MODEL +#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0 + + +/* OFFSET */ + +//U3D_B2_PHYD_TOP1 +#define RG_SSUSB_PCIE2_K_EMP_OFST (28) +#define RG_SSUSB_PCIE2_K_FUL_OFST (24) +#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17) +#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16) +#define RG_SSUSB_SIGDET_EN_OFST (15) +#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14) +#define RG_SSUSB_CLKRX_EN_OFST (13) +#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12) +#define RG_SSUSB_CLKTX_EN_OFST (11) +#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10) +#define RG_SSUSB_CLK_REQ_N_I_OFST (9) +#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8) +#define RG_SSUSB_RATE_OFST (6) +#define RG_SSUSB_FORCE_RATE_OFST (5) +#define RG_SSUSB_PCIE_MODE_SEL_OFST (4) +#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3) +#define RG_SSUSB_PHY_MODE_OFST (1) +#define RG_SSUSB_FORCE_PHY_MODE_OFST (0) + +//U3D_B2_PHYD_TOP2 +#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30) +#define RG_SSUSB_IDRV_6DB_OFST (24) +#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22) +#define RG_SSUSB_IDEM_3P5DB_OFST (16) +#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14) +#define RG_SSUSB_IDRV_3P5DB_OFST (8) +#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6) +#define RG_SSUSB_IDRV_0DB_OFST (0) + +//U3D_B2_PHYD_TOP3 +#define RG_SSUSB_TX_BIASI_OFST (25) +#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24) +#define RG_SSUSB_TX_BIASI_EN_OFST (16) +#define RG_SSUSB_FORCE_TX_BIASI_OFST (13) +#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8) +#define RG_SSUSB_IDEM_6DB_OFST (0) + +//U3D_B2_PHYD_TOP4 +#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28) +#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24) +#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16) +#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8) +#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0) + +//U3D_B2_PHYD_TOP5 +#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24) +#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16) +#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8) +#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0) + +//U3D_B2_PHYD_TOP6 +#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28) +#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24) +#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16) +#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8) +#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0) + +//U3D_B2_PHYD_TOP7 +#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24) +#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16) +#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8) +#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0) + +//U3D_B2_PHYD_P_SIGDET1 +#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31) +#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24) +#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16) +#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8) +#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0) + +//U3D_B2_PHYD_P_SIGDET2 +#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29) +#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28) +#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27) +#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25) +#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24) +#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16) +#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10) +#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8) +#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6) +#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5) +#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4) +#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2) +#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0) + +//U3D_B2_PHYD_P_SIGDET_CAL1 +#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24) +#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16) +#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8) +#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3) +#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2) +#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1) +#define RG_SSUSB_P_SIGDET_REK_OFST (0) + +//U3D_B2_PHYD_RXDET1 +#define RG_SSUSB_RXDET_PRB_SEL_OFST (31) +#define RG_SSUSB_FORCE_CMDET_OFST (30) +#define RG_SSUSB_RXDET_EN_OFST (29) +#define RG_SSUSB_FORCE_RXDET_EN_OFST (28) +#define RG_SSUSB_RXDET_K_TWICE_OFST (27) +#define RG_SSUSB_RXDET_STB3_SET_OFST (18) +#define RG_SSUSB_RXDET_STB2_SET_OFST (9) +#define RG_SSUSB_RXDET_STB1_SET_OFST (0) + +//U3D_B2_PHYD_RXDET2 +#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31) +#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30) +#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29) +#define RG_SSUSB_PDN_T_SEL_OFST (18) +#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9) +#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0) + +//U3D_B2_PHYD_MISC0 +#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22) +#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21) +#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20) +#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16) +#define RG_SSUSB_LFPS_PSEL_OFST (15) +#define RG_SSUSB_RX_SIGDET_EN_OFST (14) +#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13) +#define RG_SSUSB_RX_PI_CAL_EN_OFST (12) +#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11) +#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10) +#define RG_SSUSB_T2RLB_PSEL_OFST (8) +#define RG_SSUSB_PPCTL_PSEL_OFST (5) +#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4) +#define RG_SSUSB_BERTLB_PSEL_OFST (2) +#define RG_SSUSB_RETRACK_DIS_OFST (1) +#define RG_SSUSB_PPERRCNT_CLR_OFST (0) + +//U3D_B2_PHYD_MISC2 +#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31) +#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27) +#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26) +#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25) +#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24) +#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23) +#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22) +#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13) +#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7) +#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1) +#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0) + +//U3D_B2_PHYD_MISC3 +#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16) +#define RGS_SSUSB_PPERRCNT_OFST (0) + +//U3D_B2_ROSC_0 +#define RG_SSUSB_RING_OSC_CNTEND_OFST (23) +#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16) +#define RG_SSUSB_RING_OSC_EN_OFST (3) +#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2) +#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1) +#define RG_SSUSB_RING_BYPASS_DET_OFST (0) + +//U3D_B2_ROSC_1 +#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20) +#define RG_SSUSB_RING_OSC_P3_OFST (19) +#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17) +#define RG_SSUSB_RING_OSC_RECAL_OFST (16) +#define RG_SSUSB_RING_OSC_SEL_OFST (8) +#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0) + +//U3D_B2_ROSC_2 +#define RG_SSUSB_RING_DET_STRCYC2_OFST (16) +#define RG_SSUSB_RING_DET_STRCYC1_OFST (0) + +//U3D_B2_ROSC_3 +#define RG_SSUSB_RING_DET_DETWIN1_OFST (16) +#define RG_SSUSB_RING_DET_STRCYC3_OFST (0) + +//U3D_B2_ROSC_4 +#define RG_SSUSB_RING_DET_DETWIN3_OFST (16) +#define RG_SSUSB_RING_DET_DETWIN2_OFST (0) + +//U3D_B2_ROSC_5 +#define RG_SSUSB_RING_DET_LBOND1_OFST (16) +#define RG_SSUSB_RING_DET_UBOND1_OFST (0) + +//U3D_B2_ROSC_6 +#define RG_SSUSB_RING_DET_LBOND2_OFST (16) +#define RG_SSUSB_RING_DET_UBOND2_OFST (0) + +//U3D_B2_ROSC_7 +#define RG_SSUSB_RING_DET_LBOND3_OFST (16) +#define RG_SSUSB_RING_DET_UBOND3_OFST (0) + +//U3D_B2_ROSC_8 +#define RG_SSUSB_RING_RESERVE_OFST (16) +#define RG_SSUSB_ROSC_PROB_SEL_OFST (2) +#define RG_SSUSB_RING_FREQMETER_EN_OFST (1) +#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0) + +//U3D_B2_ROSC_9 +#define RGS_FM_RING_CNT_OFST (16) +#define RGS_SSUSB_RING_OSC_STATE_OFST (10) +#define RGS_SSUSB_RING_OSC_STABLE_OFST (9) +#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8) +#define RGS_SSUSB_RING_OSC_CAL_OFST (0) + +//U3D_B2_ROSC_A +#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0) + +//U3D_PHYD_VERSION +#define RGS_SSUSB_PHYD_VERSION_OFST (0) + +//U3D_PHYD_MODEL +#define RGS_SSUSB_PHYD_MODEL_OFST (0) + + +/////////////////////////////////////////////////////////////////////////////// + +struct sifslv_chip_reg { + PHY_LE32 xtalbias; + PHY_LE32 syspll1; + PHY_LE32 gpio_ctla; + PHY_LE32 gpio_ctlb; + PHY_LE32 gpio_ctlc; +}; + +//U3D_GPIO_CTLA +#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0 + +//U3D_GPIO_CTLB +#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0 + +//U3D_GPIO_CTLC +#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0 + +/* OFFSET */ + +//U3D_GPIO_CTLA +#define RG_C60802_GPIO_CTLA_OFST (0) + +//U3D_GPIO_CTLB +#define RG_C60802_GPIO_CTLB_OFST (0) + +//U3D_GPIO_CTLC +#define RG_C60802_GPIO_CTLC_OFST (0) + +/////////////////////////////////////////////////////////////////////////////// + +struct sifslv_fm_feg { + //0x0 + PHY_LE32 fmcr0; + PHY_LE32 fmcr1; + PHY_LE32 fmcr2; + PHY_LE32 fmmonr0; + //0x10 + PHY_LE32 fmmonr1; +}; + +//U3D_FMCR0 +#define RG_LOCKTH (0xf<<28) //31:28 +#define RG_MONCLK_SEL (0x3<<26) //27:26 +#define RG_FM_MODE (0x1<<25) //25:25 +#define RG_FREQDET_EN (0x1<<24) //24:24 +#define RG_CYCLECNT (0xffffff<<0) //23:0 + +//U3D_FMCR1 +#define RG_TARGET (0xffffffff<<0) //31:0 + +//U3D_FMCR2 +#define RG_OFFSET (0xffffffff<<0) //31:0 + +//U3D_FMMONR0 +#define USB_FM_OUT (0xffffffff<<0) //31:0 + +//U3D_FMMONR1 +#define RG_MONCLK_SEL_3 (0x1<<9) //9:9 +#define RG_FRCK_EN (0x1<<8) //8:8 +#define USBPLL_LOCK (0x1<<1) //1:1 +#define USB_FM_VLD (0x1<<0) //0:0 + + +/* OFFSET */ + +//U3D_FMCR0 +#define RG_LOCKTH_OFST (28) +#define RG_MONCLK_SEL_OFST (26) +#define RG_FM_MODE_OFST (25) +#define RG_FREQDET_EN_OFST (24) +#define RG_CYCLECNT_OFST (0) + +//U3D_FMCR1 +#define RG_TARGET_OFST (0) + +//U3D_FMCR2 +#define RG_OFFSET_OFST (0) + +//U3D_FMMONR0 +#define USB_FM_OUT_OFST (0) + +//U3D_FMMONR1 +#define RG_MONCLK_SEL_3_OFST (9) +#define RG_FRCK_EN_OFST (8) +#define USBPLL_LOCK_OFST (1) +#define USB_FM_VLD_OFST (0) + + +/////////////////////////////////////////////////////////////////////////////// + +PHY_INT32 phy_init(struct u3phy_info *info); +PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); +PHY_INT32 eyescan_init(struct u3phy_info *info); +PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y + , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); +PHY_INT32 u2_save_cur_en(struct u3phy_info *info); +PHY_INT32 u2_save_cur_re(struct u3phy_info *info); +PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info); + +#endif +#endif diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c new file mode 100644 index 0000000000..ebaf7c8b15 --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c @@ -0,0 +1,58 @@ +#include "mtk-phy.h" +#ifdef CONFIG_U3D_HAL_SUPPORT +#include "mu3d_hal_osal.h" +#endif + +#ifdef CONFIG_U3_PHY_AHB_SUPPORT +#include +#include +#include + +#ifndef CONFIG_U3D_HAL_SUPPORT +#define os_writel(addr,data) {\ + (*((volatile PHY_UINT32*)(addr)) = data);\ + } +#define os_readl(addr) *((volatile PHY_UINT32*)(addr)) +#define os_writelmsk(addr, data, msk) \ + { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \ + } +#define os_setmsk(addr, msk) \ + { os_writel(addr, os_readl(addr) | msk); \ + } +#define os_clrmsk(addr, msk) \ + { os_writel(addr, os_readl(addr) &~ msk); \ + } +/*msk the data first, then umsk with the umsk.*/ +#define os_writelmskumsk(addr, data, msk, umsk) \ +{\ + os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\ +} + +#endif + +PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data) +{ + os_writel(addr, data); + + return 0; +} + +PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr) +{ + return os_readl(addr); +} + +PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data) +{ + os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8)); + + return 0; +} + +PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr) +{ + return ((os_readl(addr)>>((addr%4)*8))&0xff); +} + +#endif + diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy.c new file mode 100644 index 0000000000..7ed8f015b8 --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/mtk-phy.c @@ -0,0 +1,102 @@ +#include +#include +#include +#define U3_PHY_LIB +#include "mtk-phy.h" +#ifdef CONFIG_PROJECT_7621 +#include "mtk-phy-7621.h" +#endif +#ifdef CONFIG_PROJECT_PHY +static struct u3phy_operator project_operators = { + .init = phy_init, + .change_pipe_phase = phy_change_pipe_phase, + .eyescan_init = eyescan_init, + .eyescan = phy_eyescan, + .u2_slew_rate_calibration = u2_slew_rate_calibration, +}; +#endif + + +PHY_INT32 u3phy_init(){ +#ifndef CONFIG_PROJECT_PHY + PHY_INT32 u3phy_version; +#endif + + if(u3phy != NULL){ + return PHY_TRUE; + } + + u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); +#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); +#endif +#ifdef CONFIG_U3_PHY_GPIO_SUPPORT + u3phy->phyd_version_addr = 0x2000e4; +#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + u3phy_p1->phyd_version_addr = 0x2000e4; +#endif +#else + u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4; +#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4; +#endif +#endif + +#ifdef CONFIG_PROJECT_PHY + + u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE; + u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE; + u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE; + u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE; + u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE; + u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; + u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; + u3phy_ops = &project_operators; + +#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1; + u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1; + u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1; + u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1; + u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1; + u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; + u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; +#endif +#endif + + return PHY_TRUE; +} + +PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ + PHY_INT8 cur_value; + PHY_INT8 new_value; + + cur_value = U3PhyReadReg8(addr); + new_value = (cur_value & (~mask)) | (value << offset); + //udelay(i2cdelayus); + U3PhyWriteReg8(addr, new_value); + return PHY_TRUE; +} + +PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ + PHY_INT32 cur_value; + PHY_INT32 new_value; + + cur_value = U3PhyReadReg32(addr); + new_value = (cur_value & (~mask)) | ((value << offset) & mask); + U3PhyWriteReg32(addr, new_value); + //DRV_MDELAY(100); + + return PHY_TRUE; +} + +PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){ + + return ((U3PhyReadReg8(addr) & mask) >> offset); +} + +PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){ + + return ((U3PhyReadReg32(addr) & mask) >> offset); +} + diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy.h b/target/linux/ramips/files/drivers/usb/host/mtk-phy.h new file mode 100644 index 0000000000..07ed410412 --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/mtk-phy.h @@ -0,0 +1,179 @@ +#ifndef __MTK_PHY_NEW_H +#define __MTK_PHY_NEW_H + +//#define CONFIG_U3D_HAL_SUPPORT + +/* include system library */ +#include +#include +#include +#include + +/* Choose PHY R/W implementation */ +//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO +#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC + +/* Choose PHY version */ +//Select your project by defining one of the followings +#define CONFIG_PROJECT_7621 //7621 +#define CONFIG_PROJECT_PHY + +/* BASE ADDRESS DEFINE, should define this on ASIC */ +#define PHY_BASE 0xBE1D0000 +#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100) +#define SIFSLV_CHIP_BASE (PHY_BASE+0x700) +#define U2_PHY_BASE (PHY_BASE+0x800) +#define U3_PHYD_BASE (PHY_BASE+0x900) +#define U3_PHYD_B2_BASE (PHY_BASE+0xa00) +#define U3_PHYA_BASE (PHY_BASE+0xb00) +#define U3_PHYA_DA_BASE (PHY_BASE+0xc00) + +#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) +#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100) +#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700) +#define U2_PHY_BASE_P1 (PHY_BASE+0x1000) +#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100) +#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200) +#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300) +#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400) +#endif + +/* + +0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg +0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc +0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28 +0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28 +0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28 +0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28 +0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28 +*/ + + +/* TYPE DEFINE */ +typedef unsigned int PHY_UINT32; +typedef int PHY_INT32; +typedef unsigned short PHY_UINT16; +typedef short PHY_INT16; +typedef unsigned char PHY_UINT8; +typedef char PHY_INT8; + +typedef PHY_UINT32 __bitwise PHY_LE32; + +/* CONSTANT DEFINE */ +#define PHY_FALSE 0 +#define PHY_TRUE 1 + +/* MACRO DEFINE */ +#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data)) +#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr)) + +#define DRV_MDELAY mdelay +#define DRV_MSLEEP msleep +#define DRV_UDELAY udelay +#define DRV_USLEEP usleep + +/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */ +PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data); +PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr); +PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data); +PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr); + +/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */ +PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); +PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); +PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); +PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); + +struct u3phy_info { + PHY_INT32 phy_version; + PHY_INT32 phyd_version_addr; + +#ifdef CONFIG_PROJECT_PHY + struct u2phy_reg *u2phy_regs; + struct u3phya_reg *u3phya_regs; + struct u3phya_da_reg *u3phya_da_regs; + struct u3phyd_reg *u3phyd_regs; + struct u3phyd_bank2_reg *u3phyd_bank2_regs; + struct sifslv_chip_reg *sifslv_chip_regs; + struct sifslv_fm_feg *sifslv_fm_regs; +#endif +}; + +struct u3phy_operator { + PHY_INT32 (*init) (struct u3phy_info *info); + PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); + PHY_INT32 (*eyescan_init) (struct u3phy_info *info); + PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); + PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info); + PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info); + PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info); +}; + +#ifdef U3_PHY_LIB +#define AUTOEXT +#else +#define AUTOEXT extern +#endif + +AUTOEXT struct u3phy_info *u3phy; +AUTOEXT struct u3phy_info *u3phy_p1; +AUTOEXT struct u3phy_operator *u3phy_ops; + +/*********eye scan required*********/ + +#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF)) +#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8)) + +typedef enum +{ + SCAN_UP, + SCAN_DN +} enumScanDir; + +struct strucScanRegion +{ + PHY_INT8 bX_tl; + PHY_INT8 bY_tl; + PHY_INT8 bX_br; + PHY_INT8 bY_br; + PHY_INT8 bDeltaX; + PHY_INT8 bDeltaY; +}; + +struct strucTestCycle +{ + PHY_UINT16 wEyeCnt; + PHY_INT8 bNumOfEyeCnt; + PHY_INT8 bPICalEn; + PHY_INT8 bNumOfIgnoreCnt; +}; + +#define ERRCNT_MAX 128 +#define CYCLE_COUNT_MAX 15 + +/// the map resolution is 128 x 128 pts +#define MAX_X 127 +#define MAX_Y 127 +#define MIN_X 0 +#define MIN_Y 0 + +PHY_INT32 u3phy_init(void); + +AUTOEXT struct strucScanRegion _rEye1; +AUTOEXT struct strucScanRegion _rEye2; +AUTOEXT struct strucTestCycle _rTestCycle; +AUTOEXT PHY_UINT8 _bXcurr; +AUTOEXT PHY_UINT8 _bYcurr; +AUTOEXT enumScanDir _eScanDir; +AUTOEXT PHY_INT8 _fgXChged; +AUTOEXT PHY_INT8 _bPIResult; +/* use local variable instead to save memory use */ +#if 0 +AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; +AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; +#endif + +/***********************************/ +#endif + diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c new file mode 100644 index 0000000000..9d9352678e --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c @@ -0,0 +1,115 @@ +#include "xhci-mtk.h" +#include "xhci-mtk-power.h" +#include "xhci.h" +#include /* printk() */ +#include +#include + +static int g_num_u3_port; +static int g_num_u2_port; + + +void enableXhciAllPortPower(struct xhci_hcd *xhci){ + int i; + u32 port_id, temp; + u32 __iomem *addr; + + g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); + g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); + + for(i=1; i<=g_num_u3_port; i++){ + port_id=i; + addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); + temp = xhci_readl(xhci, addr); + temp = xhci_port_state_to_neutral(temp); + temp |= PORT_POWER; + xhci_writel(xhci, temp, addr); + } + for(i=1; i<=g_num_u2_port; i++){ + port_id=i+g_num_u3_port; + addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); + temp = xhci_readl(xhci, addr); + temp = xhci_port_state_to_neutral(temp); + temp |= PORT_POWER; + xhci_writel(xhci, temp, addr); + } +} + +void enableAllClockPower(){ + + int i; + u32 temp; + + g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); + g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); + + //2. Enable xHC + writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); + writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); + writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); + + //1. Enable target ports + for(i=0; i +#include "xhci.h" +#include "xhci-mtk.h" + +void enableXhciAllPortPower(struct xhci_hcd *xhci); +void enableAllClockPower(void); +void disablePortClockPower(void); +void enablePortClockPower(int port_index, int port_rev); + +#endif diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c new file mode 100644 index 0000000000..bf6a8bdc19 --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c @@ -0,0 +1,608 @@ +#include "xhci-mtk-scheduler.h" +#include /* printk() */ + +static struct sch_ep **ss_out_eps[MAX_EP_NUM]; +static struct sch_ep **ss_in_eps[MAX_EP_NUM]; +static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc +static struct sch_ep **tt_intr_eps[MAX_EP_NUM]; + + +int mtk_xhci_scheduler_init(void){ + int i; + + for(i=0; idev_speed = dev_speed; + tmp_ep->isTT = isTT; + tmp_ep->is_in = is_in; + tmp_ep->ep_type = ep_type; + tmp_ep->maxp = maxp; + tmp_ep->interval = interval; + tmp_ep->burst = burst; + tmp_ep->mult = mult; + tmp_ep->offset = offset; + tmp_ep->repeat = repeat; + tmp_ep->pkts = pkts; + tmp_ep->cs_count = cs_count; + tmp_ep->burst_mode = burst_mode; + tmp_ep->bw_cost = bw_cost; + tmp_ep->ep = ep; + ep_array[i] = tmp_ep; + return SCH_SUCCESS; + } + } + return SCH_FAIL; +} + +int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat + , int td_size){ + int i, j, k; + int bw_required[3]; + int final_bw_required; + int bw_required_per_repeat; + int tmp_bw_required; + struct sch_ep *cur_sch_ep; + struct sch_ep **ep_array; + int cur_offset; + int cur_ep_offset; + int tmp_offset; + int tmp_interval; + int ep_offset; + int ep_interval; + int ep_repeat; + int ep_mult; + + if(is_in){ + ep_array = (struct sch_ep **)ss_in_eps; + } + else{ + ep_array = (struct sch_ep **)ss_out_eps; + } + + bw_required[0] = 0; + bw_required[1] = 0; + bw_required[2] = 0; + + if(repeat == 0){ + final_bw_required = 0; + for(i=0; iinterval; + ep_offset = cur_sch_ep->offset; + if(cur_sch_ep->repeat == 0){ + if(ep_interval >= interval){ + tmp_offset = ep_offset + ep_interval - offset; + tmp_interval = interval; + } + else{ + tmp_offset = offset + interval - ep_offset; + tmp_interval = ep_interval; + } + if(tmp_offset % tmp_interval == 0){ + final_bw_required += cur_sch_ep->bw_cost; + } + } + else{ + ep_repeat = cur_sch_ep->repeat; + ep_mult = cur_sch_ep->mult; + for(k=0; k<=ep_mult; k++){ + cur_ep_offset = ep_offset+(k*ep_mult); + if(ep_interval >= interval){ + tmp_offset = cur_ep_offset + ep_interval - offset; + tmp_interval = interval; + } + else{ + tmp_offset = offset + interval - cur_ep_offset; + tmp_interval = ep_interval; + } + if(tmp_offset % tmp_interval == 0){ + final_bw_required += cur_sch_ep->bw_cost; + break; + } + } + } + } + final_bw_required += td_size; + } + else{ + bw_required_per_repeat = maxp * (burst+1); + for(j=0; j<=mult; j++){ + tmp_bw_required = 0; + cur_offset = offset+(j*repeat); + for(i=0; iinterval; + ep_offset = cur_sch_ep->offset; + if(cur_sch_ep->repeat == 0){ + if(ep_interval >= interval){ + tmp_offset = ep_offset + ep_interval - cur_offset; + tmp_interval = interval; + } + else{ + tmp_offset = cur_offset + interval - ep_offset; + tmp_interval = ep_interval; + } + if(tmp_offset % tmp_interval == 0){ + tmp_bw_required += cur_sch_ep->bw_cost; + } + } + else{ + ep_repeat = cur_sch_ep->repeat; + ep_mult = cur_sch_ep->mult; + for(k=0; k<=ep_mult; k++){ + cur_ep_offset = ep_offset+(k*ep_repeat); + if(ep_interval >= interval){ + tmp_offset = cur_ep_offset + ep_interval - cur_offset; + tmp_interval = interval; + } + else{ + tmp_offset = cur_offset + interval - cur_ep_offset; + tmp_interval = ep_interval; + } + if(tmp_offset % tmp_interval == 0){ + tmp_bw_required += cur_sch_ep->bw_cost; + break; + } + } + } + } + bw_required[j] = tmp_bw_required; + } + final_bw_required = SS_BW_BOUND; + for(j=0; j<=mult; j++){ + if(bw_required[j] < final_bw_required){ + final_bw_required = bw_required[j]; + } + } + final_bw_required += bw_required_per_repeat; + } + return final_bw_required; +} + +int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){ + int i; + int bw_required; + struct sch_ep *cur_sch_ep; + int tmp_offset; + int tmp_interval; + int ep_offset; + int ep_interval; + int cur_tt_isoc_interval; //for isoc tt check + + bw_required = 0; + for(i=0; ioffset; + ep_interval = cur_sch_ep->interval; + + if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ + cur_tt_isoc_interval = ep_interval<<3; + if(ep_interval >= interval){ + tmp_offset = ep_offset + cur_tt_isoc_interval - offset; + tmp_interval = interval; + } + else{ + tmp_offset = offset + interval - ep_offset; + tmp_interval = cur_tt_isoc_interval; + } + if(cur_sch_ep->is_in){ + if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ + bw_required += 188; + } + } + else{ + if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ + bw_required += 188; + } + } + } + else{ + if(ep_interval >= interval){ + tmp_offset = ep_offset + ep_interval - offset; + tmp_interval = interval; + } + else{ + tmp_offset = offset + interval - ep_offset; + tmp_interval = ep_interval; + } + if(tmp_offset%tmp_interval == 0){ + bw_required += cur_sch_ep->bw_cost; + } + } + } + bw_required += td_size; + return bw_required; +} + +int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){ + char is_cs; + int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe; + int bw_required, max_bw; + int ss_cs_count; + int cs_mframe; + int max_frame; + int i,j; + struct sch_ep *cur_sch_ep; + int ep_offset; + int ep_interval; + int ep_cs_count; + int tt_isoc_interval; //for isoc tt check + int cur_tt_isoc_interval; //for isoc tt check + int tmp_offset; + int tmp_interval; + + is_cs = 0; + + tt_isoc_interval = interval<<3; //frame to mframe + if(is_in){ + is_cs = 1; + } + s_frame = offset/8; + s_mframe = offset%8; + ss_cs_count = (maxp + (188 - 1))/188; + if(is_cs){ + cs_mframe = offset%8 + 2 + ss_cs_count; + if (cs_mframe <= 6) + ss_cs_count += 2; + else if (cs_mframe == 7) + ss_cs_count++; + else if (cs_mframe > 8) + return -1; + } + max_bw = 0; + if(is_in){ + i=2; + } + for(cur_mframe = offset+i; ioffset; + ep_interval = cur_sch_ep->interval; + if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ + //isoc tt + //check if mframe offset overlap + //if overlap, add 188 to the bw + cur_tt_isoc_interval = ep_interval<<3; + if(cur_tt_isoc_interval >= tt_isoc_interval){ + tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe; + tmp_interval = tt_isoc_interval; + } + else{ + tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; + tmp_interval = cur_tt_isoc_interval; + } + if(cur_sch_ep->is_in){ + if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ + bw_required += 188; + } + } + else{ + if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ + bw_required += 188; + } + } + + } + else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){ + //check if mframe + if(ep_interval >= tt_isoc_interval){ + tmp_offset = (ep_offset+ep_interval) - cur_mframe; + tmp_interval = tt_isoc_interval; + } + else{ + tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; + tmp_interval = ep_interval; + } + if(tmp_offset%tmp_interval == 0){ + bw_required += cur_sch_ep->bw_cost; + } + } + } + bw_required += 188; + if(bw_required > max_bw){ + max_bw = bw_required; + } + } + return max_bw; +} + +int count_tt_intr_bw(int interval, int frame_offset){ + //check all eps in tt_intr_eps + int ret; + int i,j; + int ep_offset; + int ep_interval; + int tmp_offset; + int tmp_interval; + ret = SCH_SUCCESS; + struct sch_ep *cur_sch_ep; + + for(i=0; ioffset; + ep_interval = cur_sch_ep->interval; + if(ep_interval >= interval){ + tmp_offset = ep_offset + ep_interval - frame_offset; + tmp_interval = interval; + } + else{ + tmp_offset = frame_offset + interval - ep_offset; + tmp_interval = ep_interval; + } + + if(tmp_offset%tmp_interval==0){ + return SCH_FAIL; + } + } + return SCH_SUCCESS; +} + +struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){ + int i; + struct sch_ep **ep_array; + struct sch_ep *cur_ep; + + if (is_in && dev_speed == USB_SPEED_SUPER) { + ep_array = (struct sch_ep **)ss_in_eps; + } + else if (dev_speed == USB_SPEED_SUPER) { + ep_array = (struct sch_ep **)ss_out_eps; + } + else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) { + ep_array = (struct sch_ep **)hs_eps; + } + else { + ep_array = (struct sch_ep **)tt_intr_eps; + } + for (i = 0; i < MAX_EP_NUM; i++) { + cur_ep = (struct sch_ep *)ep_array[i]; + if(cur_ep != NULL && cur_ep->ep == ep){ + ep_array[i] = NULL; + return cur_ep; + } + } + return NULL; +} + +int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst + , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){ + mtk_u32 bPkts = 0; + mtk_u32 bCsCount = 0; + mtk_u32 bBm = 1; + mtk_u32 bOffset = 0; + mtk_u32 bRepeat = 0; + int ret; + struct mtk_xhci_ep_ctx *temp_ep_ctx; + int td_size; + int mframe_idx, frame_idx; + int bw_cost; + int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat; + int cur_offset, cs_mframe; + int break_out; + int frame_interval; + + printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp + , interval, burst, mult, ep, ep_ctx, sch_ep); + if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){ + frame_interval = interval >> 3; + for(frame_idx=0; frame_idx>3; + for(frame_idx=0; frame_idx 0 && cur_bw < best_bw){ + best_bw_idx = cur_offset; + best_bw = cur_bw; + if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ + break_out = 1; + break; + } + } + } + } + if(best_bw_idx == -1){ + return SCH_FAIL; + } + else{ + bOffset = best_bw_idx; + bPkts = 1; + bCsCount = (maxp + (188 - 1)) / 188; + if(is_in){ + cs_mframe = bOffset%8 + 2 + bCsCount; + if (cs_mframe <= 6) + bCsCount += 2; + else if (cs_mframe == 7) + bCsCount++; + } + bw_cost = 188; + bRepeat = 0; + if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult + , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ + return SCH_FAIL; + } + ret = SCH_SUCCESS; + } + } + else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){ + bPkts = 1; + ret = SCH_SUCCESS; + } + else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){ + bPkts = 1; + ret = SCH_SUCCESS; + } + else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ + best_bw = HS_BW_BOUND; + best_bw_idx = -1; + cur_bw = 0; + td_size = maxp*(burst+1); + for(cur_offset = 0; cur_offset 0 && cur_bw < best_bw){ + best_bw_idx = cur_offset; + best_bw = cur_bw; + if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ + break; + } + } + } + if(best_bw_idx == -1){ + return SCH_FAIL; + } + else{ + bOffset = best_bw_idx; + bPkts = burst + 1; + bCsCount = 0; + bw_cost = td_size; + bRepeat = 0; + if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult + , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ + return SCH_FAIL; + } + ret = SCH_SUCCESS; + } + } + else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ + best_bw = SS_BW_BOUND; + best_bw_idx = -1; + cur_bw = 0; + td_size = maxp * (mult+1) * (burst+1); + if(mult == 0){ + max_repeat = 0; + } + else{ + max_repeat = (interval-1)/(mult+1); + } + break_out = 0; + for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){ + for(repeat = max_repeat; repeat >= 0; repeat--){ + cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx + , repeat, td_size); + printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n" + , frame_idx, repeat, td_size, cur_bw); + if(cur_bw > 0 && cur_bw < best_bw){ + best_bw_idx = frame_idx; + best_bw_repeat = repeat; + best_bw = cur_bw; + if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){ + break_out = 1; + break; + } + } + } + } + printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat); + if(best_bw_idx == -1){ + return SCH_FAIL; + } + else{ + bOffset = best_bw_idx; + bCsCount = 0; + bRepeat = best_bw_repeat; + if(bRepeat == 0){ + bw_cost = (burst+1)*(mult+1)*maxp; + bPkts = (burst+1)*(mult+1); + } + else{ + bw_cost = (burst+1)*maxp; + bPkts = (burst+1); + } + if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult + , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ + return SCH_FAIL; + } + ret = SCH_SUCCESS; + } + } + else{ + bPkts = 1; + ret = SCH_SUCCESS; + } + if(ret == SCH_SUCCESS){ + temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx; + temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm)); + temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat)); + + printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm); + printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat); + return SCH_SUCCESS; + } + else{ + return SCH_FAIL; + } +} diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h new file mode 100644 index 0000000000..c55dfb10da --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h @@ -0,0 +1,77 @@ +#ifndef _XHCI_MTK_SCHEDULER_H +#define _XHCI_MTK_SCHEDULER_H + +#define MTK_SCH_NEW 1 + +#define SCH_SUCCESS 1 +#define SCH_FAIL 0 + +#define MAX_EP_NUM 64 +#define SS_BW_BOUND 51000 +#define HS_BW_BOUND 6144 + +#define USB_EP_CONTROL 0 +#define USB_EP_ISOC 1 +#define USB_EP_BULK 2 +#define USB_EP_INT 3 + +#define USB_SPEED_LOW 1 +#define USB_SPEED_FULL 2 +#define USB_SPEED_HIGH 3 +#define USB_SPEED_SUPER 5 + +/* mtk scheduler bitmasks */ +#define BPKTS(p) ((p) & 0x3f) +#define BCSCOUNT(p) (((p) & 0x7) << 8) +#define BBM(p) ((p) << 11) +#define BOFFSET(p) ((p) & 0x3fff) +#define BREPEAT(p) (((p) & 0x7fff) << 16) + + +#if 1 +typedef unsigned int mtk_u32; +typedef unsigned long long mtk_u64; +#endif + +#define NULL ((void *)0) + +struct mtk_xhci_ep_ctx { + mtk_u32 ep_info; + mtk_u32 ep_info2; + mtk_u64 deq; + mtk_u32 tx_info; + /* offset 0x14 - 0x1f reserved for HC internal use */ + mtk_u32 reserved[3]; +}; + + +struct sch_ep +{ + //device info + int dev_speed; + int isTT; + //ep info + int is_in; + int ep_type; + int maxp; + int interval; + int burst; + int mult; + //scheduling info + int offset; + int repeat; + int pkts; + int cs_count; + int burst_mode; + //other + int bw_cost; //bandwidth cost in each repeat; including overhead + mtk_u32 *ep; //address of usb_endpoint pointer +}; + +int mtk_xhci_scheduler_init(void); +int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst + , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep); +struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep); + + +#endif diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c new file mode 100644 index 0000000000..2eed0a174a --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c @@ -0,0 +1,265 @@ +#include "xhci-mtk.h" +#include "xhci-mtk-power.h" +#include "xhci.h" +#include "mtk-phy.h" +#ifdef CONFIG_C60802_SUPPORT +#include "mtk-phy-c60802.h" +#endif +#include "xhci-mtk-scheduler.h" +#include /* printk() */ +#include +#include +#include +#include +#include + +void setInitialReg(void ) +{ + __u32 __iomem *addr; + u32 temp; + + /* set SSUSB DMA burst size to 128B */ + addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG; + temp = SSUSB_HDMA_CFG_MT7621_VALUE; + writel(temp, addr); + + /* extend U3 LTSSM Polling.LFPS timeout value */ + addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3; + temp = U3_LTSSM_TIMING_PARAMETER3_VALUE; + writel(temp, addr); + + /* EOF */ + addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF; + temp = SYNC_HS_EOF_VALUE; + writel(temp, addr); + +#if defined (CONFIG_PERIODIC_ENP) + /* HSCH_CFG1: SCH2_FIFO_DEPTH */ + addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1; + temp = readl(addr); + temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET); + writel(temp, addr); +#endif + + /* Doorbell handling */ + addr = SIFSLV_IPPC + SSUSB_IP_SPAR0; + temp = 0x1; + writel(temp, addr); + + /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */ + /* Port 0 */ + addr = U2_PHY_BASE + U2_PHYD_CR1; + temp = readl(addr); + temp &= ~(0x3 << 18); + temp |= (1 << 18); + writel(temp, addr); + + /* Port 1 */ + addr = U2_PHY_BASE_P1 + U2_PHYD_CR1; + temp = readl(addr); + temp &= ~(0x3 << 18); + temp |= (1 << 18); + writel(temp, addr); +} + + +void setLatchSel(void){ + __u32 __iomem *latch_sel_addr; + u32 latch_sel_value; + latch_sel_addr = U3_PIPE_LATCH_SEL_ADD; + latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX); + writel(latch_sel_value, latch_sel_addr); +} + +void reinitIP(void){ + __u32 __iomem *ip_reset_addr; + u32 ip_reset_value; + + enableAllClockPower(); + mtk_xhci_scheduler_init(); +} + +void dbg_prb_out(void){ + mtk_probe_init(0x0f0f0f0f); + mtk_probe_out(0xffffffff); + mtk_probe_out(0x01010101); + mtk_probe_out(0x02020202); + mtk_probe_out(0x04040404); + mtk_probe_out(0x08080808); + mtk_probe_out(0x10101010); + mtk_probe_out(0x20202020); + mtk_probe_out(0x40404040); + mtk_probe_out(0x80808080); + mtk_probe_out(0x55555555); + mtk_probe_out(0xaaaaaaaa); +} + + + +/////////////////////////////////////////////////////////////////////////////// + +#define RET_SUCCESS 0 +#define RET_FAIL 1 + +static int dbg_u3w(int argc, char**argv) +{ + int u4TimingValue; + char u1TimingValue; + int u4TimingAddress; + + if (argc<3) + { + printk(KERN_ERR "Arg: address value\n"); + return RET_FAIL; + } + u3phy_init(); + + u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); + u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16); + u1TimingValue = u4TimingValue & 0xff; + /* access MMIO directly */ + writel(u1TimingValue, u4TimingAddress); + printk(KERN_ERR "Write done\n"); + return RET_SUCCESS; + +} + +static int dbg_u3r(int argc, char**argv) +{ + char u1ReadTimingValue; + int u4TimingAddress; + if (argc<2) + { + printk(KERN_ERR "Arg: address\n"); + return 0; + } + u3phy_init(); + mdelay(500); + u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); + /* access MMIO directly */ + u1ReadTimingValue = readl(u4TimingAddress); + printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue); + return 0; +} + +static int dbg_u3init(int argc, char**argv) +{ + int ret; + ret = u3phy_init(); + printk(KERN_ERR "phy registers and operations initial done\n"); + if(u3phy_ops->u2_slew_rate_calibration){ + u3phy_ops->u2_slew_rate_calibration(u3phy); + } + else{ + printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); + } + if(u3phy_ops->init(u3phy) == PHY_TRUE) + return RET_SUCCESS; + return RET_FAIL; +} + +void dbg_setU1U2(int argc, char**argv){ + struct xhci_hcd *xhci; + int u1_value; + int u2_value; + u32 port_id, temp; + u32 __iomem *addr; + + if (argc<3) + { + printk(KERN_ERR "Arg: u1value u2value\n"); + return RET_FAIL; + } + + u1_value = (int)simple_strtol(argv[1], &argv[1], 10); + u2_value = (int)simple_strtol(argv[2], &argv[2], 10); + addr = (SSUSB_U3_XHCI_BASE + 0x424); + temp = readl(addr); + temp = temp & (~(0x0000ffff)); + temp = temp | u1_value | (u2_value<<8); + writel(temp, addr); +} +/////////////////////////////////////////////////////////////////////////////// + +int call_function(char *buf) +{ + int i; + int argc; + char *argv[80]; + + argc = 0; + do + { + argv[argc] = strsep(&buf, " "); + printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]); + argc++; + } while (buf); + if (!strcmp("dbg.r", argv[0])) + dbg_prb_out(); + else if (!strcmp("dbg.u3w", argv[0])) + dbg_u3w(argc, argv); + else if (!strcmp("dbg.u3r", argv[0])) + dbg_u3r(argc, argv); + else if (!strcmp("dbg.u3i", argv[0])) + dbg_u3init(argc, argv); + else if (!strcmp("pw.u1u2", argv[0])) + dbg_setU1U2(argc, argv); + return 0; +} + +long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + char w_buf[200]; + char r_buf[200] = "this is a test"; + int len = 200; + + switch (cmd) { + case IOCTL_READ: + copy_to_user((char *) arg, r_buf, len); + printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf); + break; + case IOCTL_WRITE: + copy_from_user(w_buf, (char *) arg, len); + printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf); + + //invoke function + return call_function(w_buf); + break; + default: + return -ENOTTY; + } + + return len; +} + +int xhci_mtk_test_open(struct inode *inode, struct file *file) +{ + + printk(KERN_DEBUG "xhci_mtk_test open: successful\n"); + return 0; +} + +int xhci_mtk_test_release(struct inode *inode, struct file *file) +{ + + printk(KERN_DEBUG "xhci_mtk_test release: successful\n"); + return 0; +} + +ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr) +{ + + printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n"); + return 0; +} + +ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos) +{ + + printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n"); + return 0; +} + + + + diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h new file mode 100644 index 0000000000..0f2d5e834c --- /dev/null +++ b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h @@ -0,0 +1,120 @@ +#ifndef _XHCI_MTK_H +#define _XHCI_MTK_H + +#include +#include "xhci.h" + +#define SSUSB_U3_XHCI_BASE 0xBE1C0000 +#define SSUSB_U3_MAC_BASE 0xBE1C2400 +#define SSUSB_U3_SYS_BASE 0xBE1C2600 +#define SSUSB_U2_SYS_BASE 0xBE1C3400 +#define SSUB_SIF_SLV_TOP 0xBE1D0000 +#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700) + +#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130 +#define U3_PIPE_LATCH_TX 0 +#define U3_PIPE_LATCH_RX 0 + +#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0 +#define U3_REF_CK_PAR 0xb0 +#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8 +#define U3_RX_UX_EXIT_LFPS_REF 3 +#define U3_REF_CK_VAL 10 + +#define U3_TIMING_PULSE_CTRL 0xb4 +#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125 + +#define USB20_TIMING_PARAMETER 0x40 +#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125 + +#define LINK_PM_TIMER 0x8 +#define PM_LC_TIMEOUT_VALUE 3 + +#define XHCI_IMOD 0x624 +#define XHCI_IMOD_MT7621_VALUE 0x10 + +#define SSUSB_HDMA_CFG 0x950 +#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C + +#define U3_LTSSM_TIMING_PARAMETER3 0x2514 +#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C + +#define U2_PHYD_CR1 0x64 + +#define SSUSB_IP_SPAR0 0xC8 + +#define SYNC_HS_EOF 0x938 +#define SYNC_HS_EOF_VALUE 0x201F3 + +#define HSCH_CFG1 0x960 +#define SCH2_FIFO_DEPTH_OFFSET 16 + + +#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0) +#define SSUSB_IP_SW_RST (1<<0) +#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4) +#define SSUSB_IP_PDN (1<<0) +#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08)) +#define SSUSB_U3_PORT_DIS (1<<0) +#define SSUSB_U3_PORT_PDN (1<<1) +#define SSUSB_U3_PORT_HOST_SEL (1<<2) +#define SSUSB_U3_PORT_CKBG_EN (1<<3) +#define SSUSB_U3_PORT_MAC_RST (1<<4) +#define SSUSB_U3_PORT_PHYD_RST (1<<5) +#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08)) +#define SSUSB_U2_PORT_DIS (1<<0) +#define SSUSB_U2_PORT_PDN (1<<1) +#define SSUSB_U2_PORT_HOST_SEL (1<<2) +#define SSUSB_U2_PORT_CKBG_EN (1<<3) +#define SSUSB_U2_PORT_MAC_RST (1<<4) +#define SSUSB_U2_PORT_PHYD_RST (1<<5) +#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024) + +#define SSUSB_U3_PORT_NUM(p) (p & 0xff) +#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff) + + +#define XHCI_MTK_TEST_MAJOR 234 +#define DEVICE_NAME "xhci_mtk_test" + +#define CLI_MAGIC 'CLI' +#define IOCTL_READ _IOR(CLI_MAGIC, 0, int) +#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int) + +void reinitIP(void); +void setInitialReg(void); +void dbg_prb_out(void); +int call_function(char *buf); + +long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +int xhci_mtk_test_open(struct inode *inode, struct file *file); +int xhci_mtk_test_release(struct inode *inode, struct file *file); +ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr); +ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos); + +/* + mediatek probe out +*/ +/************************************************************************************/ + +#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0) +#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc) + +static inline void mtk_probe_init(const u32 byte){ + __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR; + writel(byte, ptr); +} + +static inline void mtk_probe_out(const u32 value){ + __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; + writel(value, ptr); +} + +static inline u32 mtk_probe_value(void){ + __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; + + return readl(ptr); +} + + +#endif diff --git a/target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch b/target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch new file mode 100644 index 0000000000..35cdf1b2dc --- /dev/null +++ b/target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch @@ -0,0 +1,862 @@ +Index: linux-3.10.26/drivers/usb/core/hub.c +=================================================================== +--- linux-3.10.26.orig/drivers/usb/core/hub.c 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/core/hub.c 2014-01-19 16:29:18.548615960 +0000 +@@ -1259,7 +1259,7 @@ + if (type != HUB_SUSPEND) { + /* Disconnect all the children */ + for (i = 0; i < hdev->maxchild; ++i) { +- if (hub->ports[i]->child) ++ if (hub->ports[i] && hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); + } + } +Index: linux-3.10.26/drivers/usb/core/port.c +=================================================================== +--- linux-3.10.26.orig/drivers/usb/core/port.c 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/core/port.c 2014-01-19 16:29:18.548615960 +0000 +@@ -193,6 +193,7 @@ + void usb_hub_remove_port_device(struct usb_hub *hub, + int port1) + { +- device_unregister(&hub->ports[port1 - 1]->dev); ++ if (hub->ports[port1 - 1]) ++ device_unregister(&hub->ports[port1 - 1]->dev); + } + +Index: linux-3.10.26/drivers/usb/host/Kconfig +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/Kconfig 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/Kconfig 2014-01-19 16:29:18.548615960 +0000 +@@ -28,7 +28,11 @@ + if USB_XHCI_HCD + + config USB_XHCI_PLATFORM +- tristate ++ bool "xHCI platform" ++ ++config USB_MT7621_XHCI_PLATFORM ++ bool "MTK MT7621 xHCI" ++ depends on USB_XHCI_PLATFORM + + config USB_XHCI_HCD_DEBUGGING + bool "Debugging for the xHCI host controller" +Index: linux-3.10.26/drivers/usb/host/Makefile +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/Makefile 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/Makefile 2014-01-19 16:30:54.964617843 +0000 +@@ -13,15 +13,23 @@ + + xhci-hcd-y := xhci.o xhci-mem.o + xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + xhci-hcd-$(CONFIG_PCI) += xhci-pci.o ++endif ++ ++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o ++endif + + ifneq ($(CONFIG_USB_XHCI_PLATFORM), ) +- xhci-hcd-y += xhci-plat.o ++xhci-hcd-y += xhci-plat.o + endif + + obj-$(CONFIG_USB_WHCI_HCD) += whci/ + ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + obj-$(CONFIG_PCI) += pci-quirks.o ++endif + + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o +Index: linux-3.10.26/drivers/usb/host/pci-quirks.h +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/pci-quirks.h 2014-01-19 16:29:17.392615927 +0000 ++++ linux-3.10.26/drivers/usb/host/pci-quirks.h 2014-01-19 16:29:18.548615960 +0000 +@@ -1,7 +1,7 @@ + #ifndef __LINUX_USB_PCI_QUIRKS_H + #define __LINUX_USB_PCI_QUIRKS_H + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); + int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); + bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); +Index: linux-3.10.26/drivers/usb/host/xhci.c +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/xhci.c 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/xhci.c 2014-01-19 16:29:18.548615960 +0000 +@@ -30,6 +30,16 @@ + + #include "xhci.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include ++#include ++#include ++#include "mtk-phy.h" ++#include "xhci-mtk-scheduler.h" ++#include "xhci-mtk-power.h" ++#include "xhci-mtk.h" ++#endif ++ + #define DRIVER_AUTHOR "Sarah Sharp" + #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" + +@@ -38,6 +48,18 @@ + module_param(link_quirk, int, S_IRUGO | S_IWUSR); + MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); ++static struct file_operations xhci_mtk_test_fops = { ++ .owner = THIS_MODULE, ++ .read = xhci_mtk_test_read, ++ .write = xhci_mtk_test_write, ++ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl, ++ .open = xhci_mtk_test_open, ++ .release = xhci_mtk_test_release, ++}; ++#endif ++ + /* TODO: copied from ehci-hcd.c - can this be refactored? */ + /* + * xhci_handshake - spin reading hc until handshake completes or fails +@@ -189,7 +211,7 @@ + return ret; + } + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + static int xhci_free_msi(struct xhci_hcd *xhci) + { + int i; +@@ -386,6 +408,7 @@ + return ret; + } + hcd->irq = pdev->irq; ++ + return 0; + } + +@@ -427,6 +450,11 @@ + xhci_dbg(xhci, "Attempting compliance mode recovery\n"); + hcd = xhci->shared_hcd; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (1 << 31); ++ xhci_writel(xhci, temp, xhci->usb3_ports[i]); ++#endif ++ + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + +@@ -475,6 +503,9 @@ + { + const char *dmi_product_name, *dmi_sys_vendor; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ return true; ++#endif + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!dmi_product_name || !dmi_sys_vendor) +@@ -518,6 +549,10 @@ + } else { + xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n"); + } ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ mtk_xhci_scheduler_init(); ++#endif + retval = xhci_mem_init(xhci, GFP_KERNEL); + xhci_dbg(xhci, "Finished xhci_init\n"); + +@@ -661,7 +696,11 @@ + xhci_dbg(xhci, "// Set the interrupt modulation register\n"); + temp = xhci_readl(xhci, &xhci->ir_set->irq_control); + temp &= ~ER_IRQ_INTERVAL_MASK; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (u32) 16; ++#else + temp |= (u32) 160; ++#endif + xhci_writel(xhci, temp, &xhci->ir_set->irq_control); + + /* Set the HCD state before we enable the irqs */ +@@ -682,6 +721,9 @@ + xhci_queue_vendor_command(xhci, 0, 0, 0, + TRB_TYPE(TRB_NEC_GET_FW)); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ enableXhciAllPortPower(xhci); ++#endif + xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n"); + return 0; + } +@@ -999,7 +1041,6 @@ + + /* If restore operation fails, re-initialize the HC during resume */ + if ((temp & STS_SRE) || hibernated) { +- + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); +@@ -1583,6 +1624,13 @@ + u32 drop_flag; + u32 new_add_flags, new_drop_flags, new_slot_info; + int ret; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ struct sch_ep *sch_ep = NULL; ++ int isTT; ++ int ep_type; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) +@@ -1634,6 +1682,40 @@ + + xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc) ++ , isTT, ep_type, (mtk_u32 *)ep); ++ if (sch_ep != NULL) { ++ kfree(sch_ep); ++ } ++ else { ++ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n"); ++ } ++#else ++ mtk_xhci_scheduler_remove_ep(xhci, udev, ep); ++#endif ++#endif ++ + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", + (unsigned int) ep->desc.bEndpointAddress, + udev->slot_id, +@@ -1669,6 +1751,18 @@ + u32 new_add_flags, new_drop_flags, new_slot_info; + struct xhci_virt_device *virt_dev; + int ret = 0; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct xhci_ep_ctx *in_ep_ctx; ++#if MTK_SCH_NEW ++ struct sch_ep *sch_ep; ++ int isTT; ++ int ep_type; ++ int maxp = 0; ++ int burst = 0; ++ int mult = 0; ++ int interval; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) { +@@ -1731,6 +1825,56 @@ + return -ENOMEM; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH ++ || udev->speed == USB_SPEED_LOW) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->desc.wMaxPacketSize >> 11; ++ mult = 0; ++ } ++ else if (udev->speed == USB_SPEED_SUPER) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->ss_ep_comp.bMaxBurst; ++ mult = ep->ss_ep_comp.bmAttributes & 0x3; ++ } ++ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff)); ++ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL); ++ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc), ++ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep ++ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#else ++ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#endif ++#endif + ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); + new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); + +@@ -2694,7 +2838,7 @@ + if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && + ctrl_ctx->drop_flags == 0) + return 0; +- ++ + xhci_dbg(xhci, "New Input Control Context:\n"); + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, +@@ -4230,10 +4374,14 @@ + u16 *timeout) + { + if (state == USB3_LPM_U1) { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_intel_u1_timeout(udev, desc); + } else { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_intel_u2_timeout(udev, desc); + } + +@@ -4659,7 +4807,9 @@ + /* Accept arbitrarily long scatter-gather lists */ + hcd->self.sg_tablesize = ~0; + /* XHCI controllers don't stop the ep queue on short packets :| */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + hcd->self.no_stop_on_short = 1; ++#endif + + if (usb_hcd_is_primary_hcd(hcd)) { + xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); +@@ -4728,6 +4878,10 @@ + goto error; + xhci_dbg(xhci, "Reset complete\n"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ setInitialReg(); ++#endif ++ + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); +@@ -4752,8 +4906,21 @@ + MODULE_AUTHOR(DRIVER_AUTHOR); + MODULE_LICENSE("GPL"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static struct platform_device xhci_platform_dev = { ++ .name = "xhci-hcd", ++ .id = -1, ++ .dev = { ++ .coherent_dma_mask = 0xffffffff, ++ }, ++}; ++#endif ++ + static int __init xhci_hcd_init(void) + { ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct platform_device *pPlatformDev; ++#endif + int retval; + + retval = xhci_register_pci(); +@@ -4766,6 +4933,33 @@ + printk(KERN_DEBUG "Problem registering platform driver."); + goto unreg_pci; + } ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops); ++ ++ u3phy_init(); ++ if (u3phy_ops->u2_slew_rate_calibration) { ++ u3phy_ops->u2_slew_rate_calibration(u3phy); ++ u3phy_ops->u2_slew_rate_calibration(u3phy_p1); ++ } ++ else{ ++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); ++ } ++ u3phy_ops->init(u3phy); ++ reinitIP(); ++ ++ pPlatformDev = &xhci_platform_dev; ++ memset(pPlatformDev, 0, sizeof(struct platform_device)); ++ pPlatformDev->name = "xhci-hcd"; ++ pPlatformDev->id = -1; ++ pPlatformDev->dev.coherent_dma_mask = 0xffffffff; ++ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask; ++ ++ retval = platform_device_register(&xhci_platform_dev); ++ if (retval < 0) ++ xhci_unregister_plat(); ++#endif ++ + /* + * Check the compiler generated sizes of structures that must be laid + * out in specific ways for hardware access. +@@ -4783,6 +4977,7 @@ + BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); + /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ + BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); ++ + return 0; + unreg_pci: + xhci_unregister_pci(); +Index: linux-3.10.26/drivers/usb/host/xhci-dbg.c +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/xhci-dbg.c 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/xhci-dbg.c 2014-01-19 16:29:18.548615960 +0000 +@@ -21,6 +21,9 @@ + */ + + #include "xhci.h" ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include "xhci-mtk.h" ++#endif + + #define XHCI_INIT_VALUE 0x0 + +Index: linux-3.10.26/drivers/usb/host/xhci.h +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/xhci.h 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/xhci.h 2014-01-19 16:29:18.548615960 +0000 +@@ -29,9 +29,24 @@ + #include + + /* Code sharing between pci-quirks and xhci hcd */ +-#include "xhci-ext-caps.h" ++#include "xhci-ext-caps.h" + #include "pci-quirks.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#define XHC_IRQ (22 + 8) ++#define XHC_IO_START 0x1E1C0000 ++#define XHC_IO_LENGTH 0x10000 ++/* mtk scheduler bitmasks */ ++#define BPKTS(p) ((p) & 0x3f) ++#define BCSCOUNT(p) (((p) & 0x7) << 8) ++#define BBM(p) ((p) << 11) ++#define BOFFSET(p) ((p) & 0x3fff) ++#define BREPEAT(p) (((p) & 0x7fff) << 16) ++#endif ++ ++ ++ ++ + /* xHCI PCI Configuration Registers */ + #define XHCI_SBRN_OFFSET (0x60) + +@@ -1536,8 +1551,12 @@ + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; ++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++#define COMP_MODE_RCVRY_MSECS 5000 ++#else + /* Compliance Mode Timer Triggered every 2 seconds */ + #define COMP_MODE_RCVRY_MSECS 2000 ++#endif + }; + + /* convert between an HCD pointer and the corresponding EHCI_HCD */ +@@ -1703,7 +1722,7 @@ + void xhci_free_command(struct xhci_hcd *xhci, + struct xhci_command *command); + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + /* xHCI PCI glue */ + int xhci_register_pci(void); + void xhci_unregister_pci(void); +Index: linux-3.10.26/drivers/usb/host/xhci-mem.c +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/xhci-mem.c 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/xhci-mem.c 2014-01-19 16:29:18.548615960 +0000 +@@ -65,6 +65,9 @@ + + static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) + { ++ if (!seg) ++ return; ++ + if (seg->trbs) { + dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma); + seg->trbs = NULL; +@@ -1446,9 +1449,17 @@ + max_burst = (usb_endpoint_maxp(&ep->desc) + & 0x1800) >> 11; + } ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + case USB_SPEED_FULL: + case USB_SPEED_LOW: ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + default: + BUG(); +Index: linux-3.10.26/drivers/usb/host/xhci-plat.c +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/xhci-plat.c 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/xhci-plat.c 2014-01-19 16:29:18.548615960 +0000 +@@ -25,6 +25,13 @@ + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ /* MTK host controller gives a spurious successful event after a ++ * short transfer. Ignore it. ++ */ ++ xhci->quirks |= XHCI_SPURIOUS_SUCCESS; ++ xhci->quirks |= XHCI_LPM_SUPPORT; ++#endif + } + + /* called during probe() after chip reset completes */ +@@ -96,20 +103,32 @@ + + driver = &xhci_plat_xhci_driver; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ irq = XHC_IRQ; ++#else + irq = platform_get_irq(pdev, 0); ++#endif ++ + if (irq < 0) + return -ENODEV; + ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; ++#endif + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ hcd->rsrc_start = (uint32_t)XHC_IO_START; ++ hcd->rsrc_len = XHC_IO_LENGTH; ++#else + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); ++#endif + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { +Index: linux-3.10.26/drivers/usb/host/xhci-ring.c +=================================================================== +--- linux-3.10.26.orig/drivers/usb/host/xhci-ring.c 2014-01-09 20:25:15.000000000 +0000 ++++ linux-3.10.26/drivers/usb/host/xhci-ring.c 2014-01-19 16:29:18.548615960 +0000 +@@ -236,7 +236,6 @@ + */ + if (!chain && !more_trbs_coming) + break; +- + /* If we're not dealing with 0.95 hardware or + * isoc rings on AMD 0.96 host, + * carry over the chain bit of the previous TRB +@@ -273,16 +272,20 @@ + static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, + unsigned int num_trbs) + { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + int num_trbs_in_deq_seg; ++#endif + + if (ring->num_trbs_free < num_trbs) + return 0; + ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) { + num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs; + if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg) + return 0; + } ++#endif + + return 1; + } +@@ -2910,6 +2913,7 @@ + next = ring->enqueue; + + while (last_trb(xhci, ring, ring->enq_seg, next)) { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + /* If we're not dealing with 0.95 hardware or isoc rings + * on AMD 0.96 host, clear the chain bit. + */ +@@ -2919,7 +2923,9 @@ + next->link.control &= cpu_to_le32(~TRB_CHAIN); + else + next->link.control |= cpu_to_le32(TRB_CHAIN); +- ++#else ++ next->link.control &= cpu_to_le32(~TRB_CHAIN); ++#endif + wmb(); + next->link.control ^= cpu_to_le32(TRB_CYCLE); + +@@ -3049,6 +3055,9 @@ + start_trb->field[3] |= cpu_to_le32(start_cycle); + else + start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ wmb(); ++#endif + xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); + } + +@@ -3108,6 +3117,29 @@ + return (remainder >> 10) << 17; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length) ++{ ++ u32 max = 31; ++ int remainder, td_packet_count, packet_transferred; ++ ++ //0 for the last TRB ++ //FIXME: need to workaround if there is ZLP in this TD ++ if (td_running_total + trb_buffer_length == td_transfer_size) ++ return 0; ++ ++ //FIXME: need to take care of high-bandwidth (MAX_ESIT) ++ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp; ++ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); ++ remainder = td_packet_count - packet_transferred; ++ ++ if (remainder > max) ++ return max << 17; ++ else ++ return remainder << 17; ++} ++#endif ++ + /* + * For xHCI 1.0 host controllers, TD size is the number of max packet sized + * packets remaining in the TD (*not* including this TRB). +@@ -3245,6 +3277,7 @@ + } + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3254,6 +3287,13 @@ + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ if (num_trbs > 1) ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, ++ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len); ++#endif ++ ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3316,6 +3356,9 @@ + int running_total, trb_buff_len, ret; + unsigned int total_packet_count; + u64 addr; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + if (urb->num_sgs) + return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); +@@ -3341,6 +3384,25 @@ + running_total += TRB_MAX_BUFF_SIZE; + } + /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ default: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++ if((urb->transfer_flags & URB_ZERO_PACKET) ++ && ((urb->transfer_buffer_length % max_packet) == 0)){ ++ num_trbs++; ++ } ++#endif + + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, +@@ -3400,6 +3462,7 @@ + field |= TRB_ISP; + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3409,6 +3472,10 @@ + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3498,7 +3565,11 @@ + field |= 0x1; + + /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (1) { ++#else + if (xhci->hci_version == 0x100) { ++#endif + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) + field |= TRB_TX_TYPE(TRB_DATA_IN); +@@ -3522,7 +3593,12 @@ + field = TRB_TYPE(TRB_DATA); + + length_field = TRB_LEN(urb->transfer_buffer_length) | ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + xhci_td_remainder(urb->transfer_buffer_length) | ++#else ++ //CC: MTK style, no scatter-gather for control transfer ++ 0 | ++#endif + TRB_INTR_TARGET(0); + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) +@@ -3533,7 +3609,7 @@ + length_field, + field | ep_ring->cycle_state); + } +- ++ + /* Save the DMA address of the last TRB in the TD */ + td->last_trb = ep_ring->enqueue; + +@@ -3645,6 +3721,9 @@ + u64 start_addr, addr; + int i, j; + bool more_trbs_coming; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + +@@ -3658,6 +3737,21 @@ + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++#endif ++ + urb_priv = urb->hcpriv; + /* Queue the first TRB, even if it's zero-length */ + for (i = 0; i < num_tds; i++) { +@@ -3729,9 +3823,13 @@ + } else { + td->last_trb = ep_ring->enqueue; + field |= TRB_IOC; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (!(xhci->quirks & XHCI_AVOID_BEI)) { ++#else + if (xhci->hci_version == 0x100 && + !(xhci->quirks & + XHCI_AVOID_BEI)) { ++#endif + /* Set BEI bit except for the last td */ + if (i < num_tds - 1) + field |= TRB_BEI; +@@ -3746,6 +3844,7 @@ + trb_buff_len = td_remain_len; + + /* Set the TRB length, TD size, & interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + td_len - running_total); +@@ -3755,6 +3854,10 @@ + total_packet_count, urb, + (trbs_per_td - j - 1)); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0);