clean up mach-adm8668 includes

This patch cleans up the include directory, as they were from vendors
2.4 GPL source. Now only what's used is there.

Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>

SVN-Revision: 25175
v19.07.3_mercusys_ac12_duma
Florian Fainelli 14 years ago
parent 2689e63f58
commit a5adea5c2a

@ -85,9 +85,9 @@ static void adm8668_restart(char *cmd)
int i;
/* stop eth0 and eth1 */
ADM8668_LAN_REG(NETCSR6) = BIT_1|BIT_13;
ADM8668_LAN_REG(NETCSR6) = (1 << 13) | (1 << 1);
ADM8668_LAN_REG(NETCSR7) = 0;
ADM8668_WAN_REG(NETCSR6) = BIT_1|BIT_13;
ADM8668_WAN_REG(NETCSR6) = (1 << 13) | (1 << 1);
ADM8668_WAN_REG(NETCSR7) = 0;
/* reset PHY */
@ -105,7 +105,7 @@ static void adm8668_restart(char *cmd)
/* the real deal */
for (i = 0; i < 1000; i++)
;
ADM8668_CONFIG_REG(ADM8668_CR1) = BIT_0;
ADM8668_CONFIG_REG(ADM8668_CR1) = 1;
}
int __devinit adm8668_devs_register(void)

@ -96,7 +96,7 @@ void __init prom_setup_cmdline(void)
prom_argv[i] = (char *)KSEG0ADDR(prom_argv[i]);
/* default bootargs has "console=/dev/ttyS0" yet console won't
* show up at all if you do this ... */
* show up at all if you include the '/dev/' nowadays ... */
if (match_tag(prom_argv[i], "console=/dev/")) {
char *ptr = prom_argv[i] + strlen("console=/dev/");
@ -128,7 +128,6 @@ void __init prom_init(void)
memsize = bd->bi_memsize;
printk("Board info:\n");
printk(" Board ID: %#lx\n", bd->bi_arch_number);
printk(" RAM size: %d MB\n", (int)memsize/(1024*1024));
printk(" NOR start: %#lx\n", bd->bi_flashstart);
printk(" NOR size: %#lx\n", bd->bi_flashsize);

@ -9,20 +9,7 @@
#ifndef __ADM8668_H__
#define __ADM8668_H__
#include <asm/addrspace.h>
#include "bsp_sup.h"
#define MEM_KSEG0_BASE 0x80000000
#define MEM_KSEG1_BASE 0xA0000000
#define MEM_SEG_MASK 0xE0000000
#define KVA2PA(_addr) ((unsigned long)(_addr) & ~MEM_SEG_MASK)
#define MIPS_KSEG0A(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE)
#define MIPS_KSEG1A(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE)
#define PA2VA(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE)
#define PA2CACHEVA(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE)
#define SYS_CLOCK 175000000
/*======================= Physical Memory Map ============================*/
#define ADM8668_SDRAM_BASE 0
@ -37,115 +24,45 @@
#define ADM8668_TMR_BASE 0x1E200000
#define ADM8668_UART0_BASE 0x1E400000
#define ADM8668_SMEM0_BASE 0x1FC00000
#define ADM8668_NAND_BASE 0x1fffff00
#define ADM8668_NAND_BASE 0x1FFFFF00
#define PCICFG_BASE 0x12200000
#define PCIDAT_BASE 0x12400000
/* for PCI bridge fixup ! */
#define PCI_BRIDGE_MASK 0x40
/* WLAN registers */
#define WCSR0 0x00
#define WCSR11A 0x5c
#define GPIO_REG WCSR11A
#define ADM8668_WLAN_REG(_reg) \
(*((volatile unsigned int *)(PA2VA(ADM8668_WLAN_BASE + (_reg)))))
/** onboard uart **/
#define ADM8668_UARTCLK_FREQ 62500000
/* registers */
#define UART_DR_REG 0x00
#define UART_RSR_REG 0x04
#define UART_CR_REG 0x14
#define UART_FR_REG 0x18
#define UART_IIR_REG 0x1C
/* configuration registers */
#define ADM8668_CR0 0x00
#define ADM8668_CR1 0x04
#define ADM8668_CR2 0x08
#define ADM8668_CR3 0x0C
#define ADM8668_CR8 0x20
#define ADM8668_CR10 0x28
#define ADM8668_CR11 0x2C
#define ADM8668_CR12 0x30
#define ADM8668_CR13 0x34
#define ADM8668_CR14 0x38
#define ADM8668_CR15 0x3C
#define ADM8668_CR16 0x40
#define ADM8668_CR17 0x44
#define ADM8668_CR18 0x48
#define ADM8668_CR19 0x4C
#define ADM8668_CR20 0x50
#define ADM8668_CR21 0x54
#define ADM8668_CR22 0x58
#define ADM8668_CR23 0x5C
#define ADM8668_CR24 0x60
#define ADM8668_CR25 0x64
#define ADM8668_CR26 0x68
#define ADM8668_CR27 0x6C
#define ADM8668_CR28 0x70
#define ADM8668_CR29 0x74
#define ADM8668_CR30 0x78
#define ADM8668_CR31 0x7C
#define ADM8668_CR32 0x80
#define ADM8668_CR33 0x84
#define ADM8668_CR34 0x88
#define ADM8668_CR35 0x8C
#define ADM8668_CR36 0x90
#define ADM8668_CR37 0x94
#define ADM8668_CR38 0x98
#define ADM8668_CR39 0x9C
#define ADM8668_CR40 0xA0
#define ADM8668_CR41 0xA4
#define ADM8668_CR42 0xA8
#define ADM8668_CR43 0xAC
#define ADM8668_CR44 0xB0
#define ADM8668_CR45 0xB4
#define ADM8668_CR46 0xB8
#define ADM8668_CR47 0xBC
#define ADM8668_CR48 0xC0
#define ADM8668_CR49 0xC4
#define ADM8668_CR50 0xC8
#define ADM8668_CR51 0xCC
#define ADM8668_CR52 0xD0
#define ADM8668_CR53 0xD4
#define ADM8668_CR54 0xD8
#define ADM8668_CR55 0xDC
#define ADM8668_CR56 0xE0
#define ADM8668_CR57 0xE4
#define ADM8668_CR58 0xE8
#define ADM8668_CR59 0xEC
#define ADM8668_CR60 0xF0
#define ADM8668_CR61 0xF4
#define ADM8668_CR62 0xF8
#define ADM8668_CR63 0xFC
#define ADM8668_CR64 0x100
#define ADM8668_CR65 0x104
#define ADM8668_CR66 0x108
#define ADM8668_CR67 0x10C
#define ADM8668_CR68 0x110
/* rsr reg */
#define UART_FRAMING_ERR 0x01
#define UART_PARITY_ERR 0x02
#define UART_BREAK_ERR 0x04
#define UART_OVERRUN_ERR 0x08
#define UART_RX_STATUS_MASK 0x0F
#define CRGPIO_REG ADM8668_CR8
/* cr reg */
#define UART_RX_INT_EN 0x10
#define UART_TX_INT_EN 0x20
#define UART_RX_TIMEOUT_INT_EN 0x40
#define ADM8668_CONFIG_REG(_reg) \
(*((volatile unsigned int *)(PA2VA(ADM8668_CONFIG_BASE + (_reg)))))
#define ADM8668_MPMC_REG(_reg) \
(*((volatile unsigned int *)(PA2VA(ADM8668_MPMC_BASE + (_reg)))))
/* fr reg */
#define UART_RX_FIFO_EMPTY 0x10
#define UART_TX_FIFO_FULL 0x20
/* iir reg */
#define UART_RX_INT 0x02
#define UART_TX_INT 0x04
#define UART_RX_TIMEOUT_INT 0x08
/*========================== Interrupt Controller ==========================*/
/* registers offset */
/* interrupt controller */
#define IRQ_STATUS_REG 0x00 /* Read */
#define IRQ_RAW_STATUS_REG 0x04 /* Read */
#define IRQ_ENABLE_REG 0x08 /* Read/Write */
#define IRQ_DISABLE_REG 0x0C /* Write */
#define IRQ_SOFT_REG 0x10 /* Write */
#define FIQ_STATUS_REG 0x100 /* Read */
#define FIQ_RAW_STATUS_REG 0x104
#define FIQ_ENABLE_REG 0x108
#define FIQ_DISABLE_REG 0x10c
/* Macro for accessing Interrupt controller register */
#define ADM8668_INTC_REG(_reg) \
(*((volatile unsigned long *)(PA2VA(ADM8668_INTC_BASE + (_reg)))))
/* interrupt levels */
#define INT_LVL_SWI 1
@ -165,146 +82,31 @@
#define INT_LVL_USB 15
#define INT_LVL_MAX INT_LVL_USB
#define IRQ_MASK 0xffff
#define IRQ_SWI (0x1<<INT_LVL_SWI)
#define IRQ_TIMERINT0 (0x1<<INT_LVL_TIMERINT0)
#define IRQ_TIMERINT1 (0x1<<INT_LVL_TIMERINT1)
#define IRQ_UART0 (0x1<<INT_LVL_UART0)
#define IRQ_LAN (0x1<<INT_LVL_LAN)
#define IRQ_WAN (0x1<<INT_LVL_WAN)
#define IRQ_WLAN (0x1<<INT_LVL_WLAN)
#define IRQ_GPIO (0x1<<INT_LVL_GPIO)
#define IRQ_IDEINT (0x1<<INT_LVL_IDE)
#define IRQ_PCI2 (0x1<<INT_LVL_PCI2)
#define IRQ_PCI1 (0x1<<INT_LVL_PCI1)
#define IRQ_PCI0 (0x1<<INT_LVL_PCI0)
#define IRQ_USB (0x1<<INT_LVL_USB)
/*=========================== UART Control Register ========================*/
#define UART_DR_REG 0x00
#define UART_RSR_REG 0x04
#define UART_ECR_REG 0x04
#define UART_LCR_H_REG 0x08
#define UART_LCR_M_REG 0x0c
#define UART_LCR_L_REG 0x10
#define UART_CR_REG 0x14
#define UART_FR_REG 0x18
#define UART_IIR_REG 0x1c
#define UART_ICR_REG 0x1C
#define UART_ILPR_REG 0x20
/* rsr/ecr reg */
#define UART_OVERRUN_ERR 0x08
#define UART_BREAK_ERR 0x04
#define UART_PARITY_ERR 0x02
#define UART_FRAMING_ERR 0x01
#define UART_RX_STATUS_MASK 0x0f
#define UART_RX_ERROR ( UART_BREAK_ERR \
| UART_PARITY_ERR \
| UART_FRAMING_ERR)
/* lcr_h reg */
#define UART_SEND_BREAK 0x01
#define UART_PARITY_EN 0x02
#define UART_EVEN_PARITY 0x04
#define UART_TWO_STOP_BITS 0x08
#define UART_ENABLE_FIFO 0x10
#define UART_WLEN_5BITS 0x00
#define UART_WLEN_6BITS 0x20
#define UART_WLEN_7BITS 0x40
#define UART_WLEN_8BITS 0x60
#define UART_WLEN_MASK 0x60
/* cr reg */
#define UART_PORT_EN 0x01
#define UART_SIREN 0x02
#define UART_SIRLP 0x04
#define UART_MODEM_STATUS_INT_EN 0x08
#define UART_RX_INT_EN 0x10
#define UART_TX_INT_EN 0x20
#define UART_RX_TIMEOUT_INT_EN 0x40
#define UART_LOOPBACK_EN 0x80
/* fr reg */
#define UART_CTS 0x01
#define UART_DSR 0x02
#define UART_DCD 0x04
#define UART_BUSY 0x08
#define UART_RX_FIFO_EMPTY 0x10
#define UART_TX_FIFO_FULL 0x20
#define UART_RX_FIFO_FULL 0x40
#define UART_TX_FIFO_EMPTY 0x80
/* iir/icr reg */
#define UART_MODEM_STATUS_INT 0x01
#define UART_RX_INT 0x02
#define UART_TX_INT 0x04
#define UART_RX_TIMEOUT_INT 0x08
#define UART_INT_MASK 0x0f
#ifdef _FPGA_
#define ADM8668_UARTCLK_FREQ 3686400
#else
#define ADM8668_UARTCLK_FREQ 62500000
#endif
#define UART_BAUDDIV(_rate) \
((unsigned long)(ADM8668_UARTCLK_FREQ/(16*(_rate)) - 1))
/* uart_baudrate */
#define UART_230400bps_DIVISOR UART_BAUDDIV(230400)
#define UART_115200bps_DIVISOR UART_BAUDDIV(115200)
#define UART_76800bps_DIVISOR UART_BAUDDIV(76800)
#define UART_57600bps_DIVISOR UART_BAUDDIV(57600)
#define UART_38400bps_DIVISOR UART_BAUDDIV(38400)
#define UART_19200bps_DIVISOR UART_BAUDDIV(19200)
#define UART_14400bps_DIVISOR UART_BAUDDIV(14400)
#define UART_9600bps_DIVISOR UART_BAUDDIV(9600)
#define UART_2400bps_DIVISOR UART_BAUDDIV(2400)
#define UART_1200bps_DIVISOR UART_BAUDDIV(1200)
/*=========================== Counter Timer ==============================*/
#define TIMER0_REG_BASE ADM8668_TMR_BASE
#define TIMER1_REG_BASE ADM8668_TMR_BASE+0x20
#define TIMER_LOAD_REG 0x00
#define TIMER_VALUE_REG 0x04
#define TIMER_CTRL_REG 0x08
#define TIMER_CLR_REG 0x0c
/* TIMER_LOAD_REG */
#ifdef _FPGA_
#define SYS_CLOCK 56000000
#else
#define SYS_CLOCK 175000000
#endif
#define SYS_PRESCALE 256
#define TMR_10MS_TICKS (SYS_CLOCK/SYS_PRESCALE/100)
/* TIMER_CTRL_REG */
#define TMR_PRESCALE_1 0x00
#define TMR_PRESCALE_16 0x04
#define TMR_PRESCALE_256 0x08
#define TMR_MODE_PERIODIC 0x40
#define TMR_ENABLE 0x80
/* TIMER_CLR_REG */
#define TMR_CLEAR_BIT 1
/* register access macros */
#define ADM8668_INTC_REG(_reg) \
(*((volatile unsigned long *)(KSEG1ADDR(ADM8668_INTC_BASE + (_reg)))))
#define ADM8668_LAN_REG(_reg) \
(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_LAN_BASE + (_reg)))))
#define ADM8668_WAN_REG(_reg) \
(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WAN_BASE + (_reg)))))
#define ADM8668_WLAN_REG(_reg) \
(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WLAN_BASE + (_reg)))))
#define ADM8668_CONFIG_REG(_reg) \
(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_CONFIG_BASE + (_reg)))))
/* Macro for access MPMC register */
#define ADM8668_TMR_REG(base, _offset) \
(*((volatile unsigned long *)(PA2VA(base + (_offset)))))
/* lan registers */
#define NETCSR6 0x30
#define NETCSR7 0x38
#define NETCSR37 0xF8
/* known/used CPU configuration registers */
#define ADM8668_CR0 0x00
#define ADM8668_CR1 0x04
#define ADM8668_CR3 0x0C
/* For GPIO control */
/** For GPIO control **/
#define GPIO_REG 0x5C /* on WLAN */
#define CRGPIO_REG 0x20 /* on CPU */
#define GPIO0_OUTPUT_ENABLE 0x1000
#define GPIO1_OUTPUT_ENABLE 0x2000
#define GPIO2_OUTPUT_ENABLE 0x4000
@ -334,83 +136,4 @@
#define CRGPIO_TOGGLE(num) \
ADM8668_CONFIG_REG(CRGPIO_REG) ^= (1 << (6 + num))
/*==========================================================================*/
/* Cache Controller */
#define ADM8668_CACHE_LINE_SIZE 16
#define BIT_0 0x00000001
#define BIT_1 0x00000002
#define BIT_2 0x00000004
#define BIT_3 0x00000008
#define BIT_4 0x00000010
#define BIT_5 0x00000020
#define BIT_6 0x00000040
#define BIT_7 0x00000080
#define BIT_8 0x00000100
#define BIT_9 0x00000200
#define BIT_10 0x00000400
#define BIT_11 0x00000800
#define BIT_12 0x00001000
#define BIT_13 0x00002000
#define BIT_14 0x00004000
#define BIT_15 0x00008000
#define BIT_16 0x00010000
#define BIT_17 0x00020000
#define BIT_18 0x00040000
#define BIT_19 0x00080000
#define BIT_20 0x00100000
#define BIT_21 0x00200000
#define BIT_22 0x00400000
#define BIT_23 0x00800000
#define BIT_24 0x01000000
#define BIT_25 0x02000000
#define BIT_26 0x04000000
#define BIT_27 0x08000000
#define BIT_28 0x10000000
#define BIT_29 0x20000000
#define BIT_30 0x40000000
#define BIT_31 0x80000000
/* network regs */
#define NETCSR0 0x0
#define NETCSR1 0x08
#define NETCSR2 0x10
#define NETCSR3 0x18
#define NETCSR4 0x20
#define NETCSR5 0x28
#define NETCSR6 0x30
#define NETCSR7 0x38
#define NETCSR8 0x40
#define NETCSR9 0x48
#define NETCSR10 0x50
#define NETCSR11 0x58
#define NETCSR12 0x60
#define NETCSR13 0x68
#define NETCSR14 0x70
#define NETCSR15 0x78
#define NETCSR36 0xD0
#define NETCSR36A 0xD4
#define NETCSR36B 0xD8
#define NETCSR36C 0xDC // dummy
#define NETCSR36D 0xE0
#define NETCSR36E 0xE4
#define NETCSR36F 0xE8
#define NETCSR36G 0xEC
#define NETCSR36H 0xF0
#define NETCSR36I 0xF4
#define NETCSR37 0xF8
/* for descriptor skip DWs */
#define NETDESCSKIP_1DW BIT_2
#define NETDESCSKIP_2DW BIT_3
#define NETDESCSKIP_3DW (BIT_3|BIT_2)
#define NETDESCSKIP_4DW BIT_4
#define ADM8668_LAN_REG(_reg) \
(*((volatile unsigned int *)(PA2VA(ADM8668_LAN_BASE + (_reg)))))
#define ADM8668_WAN_REG(_reg) \
(*((volatile unsigned int *)(PA2VA(ADM8668_WAN_BASE + (_reg)))))
#endif /* __ADM8668_H__ */

@ -1,84 +0,0 @@
/************************************************************************
*
* Copyright (c) 2005
* Infineon Technologies AG
* St. Martin Strasse 53; 81669 Muenchen; Germany
*
************************************************************************/
#ifndef _BSP_SUP_H_
#define _BSP_SUP_H_
#define ADD_WAN_MAC
#define CONFIG_IFX_GAN
#define UBOOT_CFG_ENV_SIZE (0x400-4)
#define ADM8668_BL_MAGIC 0x6c62676d
#define ADM8668_MAC_MAGIC 0x69666164
#define ADM8668_VER_MAGIC 0x7276676d
#define ADM8668_ID_MAGIC 0x6469676d
#define ADM8668_IF_MAGIC 0x6669676d
#define ADM8668_WANMAC_MAGIC 0x69666164
#define ADM8668_IMEI_MAGIC 0x6669676e
#define BSP_IFNAME_MAX_LEN 15
#define BOOT_LINE_SIZE 255
#define BSP_STR_LEN 79
/*
* Boot mode configuration
*/
typedef struct BTMODE_CFG_S
{
unsigned long btmode;
unsigned long dlmethod;
} BTMODE_CFG_T;
/*
* Interface configuration
*/
typedef struct IF_CFG_S
{
char ifname[BSP_IFNAME_MAX_LEN+1];
unsigned long ip;
unsigned long mask;
unsigned long gateway;
} IF_CFG_T;
/*
* Board configuration
*/
typedef struct BOARD_CFG_S
{
unsigned long blmagic;
unsigned char blreserved[UBOOT_CFG_ENV_SIZE];
unsigned long macmagic;
unsigned char mac[8];
unsigned long macnum;
unsigned long idmagic;
unsigned char serial[BSP_STR_LEN+1];
unsigned long vermagic;
unsigned char ver[BSP_STR_LEN+1];
unsigned long ifmagic;
IF_CFG_T ifcfg[8];
unsigned long btmagic;
BTMODE_CFG_T bootmode;
unsigned long wanmagic;
unsigned char wanmac[8];
unsigned long imeimagic;
unsigned char imei0[16];
unsigned char imei1[16];
} BOARD_CFG_T, *PBOARD_CFG_T;
#define ADM8668_BOARD_CFG_ADDR (ADM8668_SMEM0_BASE + CONFIG_ADM8668_BSP_OFFSET*1024)
#define ADM8668_BOARD_CFG_SIZE (CONFIG_ADM8668_BSP_SIZE*1024)
#endif /* _BSP_SUP_H_ */

@ -8,28 +8,9 @@
#ifndef __ASM_MACH_ADM8668_IRQ_H
#define __ASM_MACH_ADM8668_IRQ_H
#ifndef NR_IRQS
#define NR_IRQS 32
#endif
#define NR_IRQS 32
#define MIPS_CPU_IRQ_BASE 16
#ifdef CONFIG_IRQ_CPU
#ifndef MIPS_CPU_IRQ_BASE
#define MIPS_CPU_IRQ_BASE 16
#endif
#ifdef CONFIG_IRQ_CPU_RM7K
#ifndef RM7K_CPU_IRQ_BASE
#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
#endif
#endif
#ifdef CONFIG_IRQ_CPU_RM9K
#ifndef RM9K_CPU_IRQ_BASE
#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
#endif
#endif
#endif /* CONFIG_IRQ_CPU */
#define IRQ_MASK 0xffff
#endif /* __ASM_MACH_ADM8668_IRQ_H */

@ -1,55 +0,0 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* MIPS boards bootprom interface for the Linux kernel.
*
*/
/************************************************************************
*
* Copyright (c) 2005
* Infineon Technologies AG
* St. Martin Strasse 53; 81669 Muenchen; Germany
*
************************************************************************/
#ifndef _MIPS_PROM_H
#define _MIPS_PROM_H
extern char *prom_getcmdline(void);
extern char *prom_getenv(char *name);
extern void setup_prom_printf(int tty_no);
extern void prom_printf(char *fmt, ...);
extern void prom_init_cmdline(void);
extern void prom_meminit(void);
extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
extern void prom_free_prom_memory (void);
extern void mips_display_message(const char *str);
extern void mips_display_word(unsigned int num);
extern int get_ethernet_addr(char *ethernet_addr);
/* Memory descriptor management. */
#define PROM_MAX_PMEMBLOCKS 32
struct prom_pmemblock {
unsigned long base; /* Within KSEG0. */
unsigned int size; /* In bytes. */
unsigned int type; /* free or prom memory */
};
#endif /* !(_MIPS_PROM_H) */

@ -5,7 +5,7 @@
# See /LICENSE for more information.
#
RAMSTART = 0x80000000
RAMSIZE = 0x00800000 # 1MB
RAMSIZE = 0x00800000 # 8MB
LOADADDR = 0x80400000 # RAM start + 4M
KERNEL_ENTRY = 0x80002000

Loading…
Cancel
Save