ramips: hc5xxx: use switch trigger for leds

netdev on eth0.2 can't show link status of wan port because eth0 is
connected to builtin switch and is always link up. Use swconfig
trigger instead.

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
[redo commit message]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -204,7 +204,7 @@ hauppauge,broadway)
 	set_wifi_led "$boardname:red:wps_active"
 	;;
 hiwifi,hc5661)
-	ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
 	set_wifi_led "$boardname:blue:wlan2g"
 	;;
 hiwifi,hc5661a|\
@@ -212,9 +212,13 @@ hiwifi,hc5761a|\
 xzwifi,creativebox-v1)
 	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
 	;;
-hiwifi,hc5761|\
+hiwifi,hc5761)
+	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
+	ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
+	ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
+	;;
 hiwifi,hc5861)
-	ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
 	ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
 	ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
 	;;