ar71xx: add support for buffalo WZR-450HP2
Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43026v19.07.3_mercusys_ac12_duma
Felix Fietkau
10 years ago
parent
4fde9deed1
commit
a1837135e0
@ -0,0 +1,221 @@
|
||||
/*
|
||||
* Buffalo WZR-450HP2 board support
|
||||
*
|
||||
* Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* Based on the Qualcomm Atheros AP135/AP136 reference board support code
|
||||
* Copyright (c) 2012 Qualcomm Atheros
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/phy.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define WZR_450HP2_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define WZR_450HP2_KEYS_DEBOUNCE_INTERVAL (3 * WZR_450HP2_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define WZR_450HP2_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
static struct mtd_partition wzrhpg450h_partitions[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.offset = 0,
|
||||
.size = 0x0040000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "u-boot-env",
|
||||
.offset = 0x0040000,
|
||||
.size = 0x0010000,
|
||||
}, {
|
||||
.name = "ART",
|
||||
.offset = 0x0ff0000,
|
||||
.size = 0x0010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "firmware",
|
||||
.offset = 0x0050000,
|
||||
.size = 0x0f90000,
|
||||
}, {
|
||||
.name = "user_property",
|
||||
.offset = 0x0fe0000,
|
||||
.size = 0x0010000,
|
||||
}
|
||||
};
|
||||
|
||||
static struct flash_platform_data wzr_450hp2_flash_data = {
|
||||
.parts = wzrhpg450h_partitions,
|
||||
.nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
|
||||
};
|
||||
|
||||
static struct gpio_led wzr_450hp2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "buffalo:green:wps",
|
||||
.gpio = 3,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "buffalo:green:system",
|
||||
.gpio = 20,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "buffalo:green:wlan",
|
||||
.gpio = 18,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button wzr_450hp2_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = 17,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "RFKILL button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RFKILL,
|
||||
.debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = 21,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct ar8327_led_info wzr_450hp2_leds_ar8327[] = {
|
||||
AR8327_LED_INFO(PHY0_0, HW, "buffalo:green:lan1"),
|
||||
AR8327_LED_INFO(PHY1_0, HW, "buffalo:green:lan2"),
|
||||
AR8327_LED_INFO(PHY2_0, HW, "buffalo:green:lan3"),
|
||||
AR8327_LED_INFO(PHY3_0, HW, "buffalo:green:lan4"),
|
||||
AR8327_LED_INFO(PHY4_0, HW, "buffalo:green:wan"),
|
||||
};
|
||||
|
||||
/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
|
||||
static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_SGMII,
|
||||
.sgmii_delay_en = true,
|
||||
};
|
||||
|
||||
/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
|
||||
static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad6_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
.rxclk_delay_en = true,
|
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
||||
};
|
||||
|
||||
static struct ar8327_led_cfg wzr_450hp2_ar8327_led_cfg = {
|
||||
.led_ctrl0 = 0xcc35cc35,
|
||||
.led_ctrl1 = 0xca35ca35,
|
||||
.led_ctrl2 = 0xc935c935,
|
||||
.led_ctrl3 = 0x03ffff00,
|
||||
.open_drain = true,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data wzr_450hp2_ar8327_data = {
|
||||
.pad0_cfg = &wzr_450hp2_ar8327_pad0_cfg,
|
||||
.pad6_cfg = &wzr_450hp2_ar8327_pad6_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
.port6_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
.led_cfg = &wzr_450hp2_ar8327_led_cfg,
|
||||
.num_leds = ARRAY_SIZE(wzr_450hp2_leds_ar8327),
|
||||
.leds = wzr_450hp2_leds_ar8327,
|
||||
};
|
||||
|
||||
static struct mdio_board_info wzr_450hp2_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &wzr_450hp2_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init wzr_450hp2_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 *mac_wan = art;
|
||||
u8 *mac_lan = mac_wan + ETH_ALEN;
|
||||
|
||||
ath79_register_m25p80(&wzr_450hp2_flash_data);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzr_450hp2_leds_gpio),
|
||||
wzr_450hp2_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, WZR_450HP2_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(wzr_450hp2_gpio_keys),
|
||||
wzr_450hp2_gpio_keys);
|
||||
|
||||
ath79_register_wmac(art + WZR_450HP2_WMAC_CALDATA_OFFSET, mac_lan);
|
||||
|
||||
mdiobus_register_board_info(wzr_450hp2_mdio0_info,
|
||||
ARRAY_SIZE(wzr_450hp2_mdio0_info));
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
||||
|
||||
/* GMAC0 is connected to the RMGII interface */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x56000000;
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac_wan, 0);
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* GMAC1 is connected to the SGMII interface */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
||||
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac_lan, 0);
|
||||
ath79_register_eth(1);
|
||||
|
||||
ath79_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_WZR_450HP2, "WZR-450HP2",
|
||||
"Buffalo WZR-450HP2", wzr_450hp2_setup);
|
||||
|
||||
@ -0,0 +1,39 @@
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -182,6 +182,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
|
||||
ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
|
||||
ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
|
||||
+ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */
|
||||
ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
|
||||
ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
|
||||
};
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -263,6 +263,16 @@ config ATH79_MACH_WZR_HP_G450H
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
|
||||
+config ATH79_MACH_WZR_450HP2
|
||||
+ bool "Buffalo WZR-450HP2 board support"
|
||||
+ select SOC_QCA955X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
config ATH79_MACH_WP543
|
||||
bool "Compex WP543/WPJ543 board support"
|
||||
select SOC_AR71XX
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) +
|
||||
obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
|
||||
obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
|
||||
obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o
|
||||
obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
|
||||
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
|
||||
obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
|
||||
Loading…
Reference in New Issue