ramips: mt7620: use throughput trigger on HiWiFi HC5x61

Throughput trigger support for MT7620 has been added, so switch to it

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

target/linux/ramips/dts/mt7620a_hiwifi_hc5661.dts

@@ -29,6 +29,7 @@
 		wlan2g {
 			label = "hc5661:blue:wlan2g";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 	};
 };

target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts

@@ -29,11 +29,13 @@
 		wlan2g {
 			label = "hc5761:blue:wlan2g";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 
 		wlan5g {
 			label = "hc5761:blue:wlan5g";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 	};
 };

target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts

@@ -24,6 +24,7 @@
 		wlan2g {
 			label = "hc5861:blue:wlan2g";
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
 		};
 
 		internet {
@@ -34,6 +35,7 @@
 		wlan5g {
 			label = "hc5861:blue:wlan5g";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
 		};
 
 		turbo {

target/linux/ramips/mt7620/base-files/etc/board.d/01_leds

@@ -111,19 +111,12 @@ glinet,gl-mt300n|\
 glinet,gl-mt750)
 	set_wifi_led "$boardname:wlan"
 	;;
-hiwifi,hc5661)
-	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
-	set_wifi_led "$boardname:blue:wlan2g"
-	;;
+hiwifi,hc5661|\
 hiwifi,hc5761)
 	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
-	ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
-	ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
 	;;
 hiwifi,hc5861)
 	ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
-	ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
-	ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
 	;;
 hnet,c108)
 	ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"