diff --git a/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts b/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts new file mode 100644 index 0000000000..e969007fc0 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9331.dtsi" + +/ { + compatible = "glinet,gl-mifi", "qca,ar9331"; + model = "GL.iNet GL-MiFi"; + + aliases { + serial0 = &uart; + label-mac-device = ð0; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "gl-mifi:green:wlan"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + lan { + label = "gl-mifi:green:lan"; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "gl-mifi:green:wan"; + gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + }; + + 3g4g { + label = "gl-mifi:green:3g4g"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + gpio-export { + compatible = "gpio-export"; + + minipcie { + gpio-export,name = "minipcie"; + gpio-export,output = <0>; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&usb { + status = "okay"; + + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + status = "okay"; + + num-chipselects = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <33000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 2bd70aae31..f3e3b758b5 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -153,6 +153,10 @@ glinet,gl-ar300m-lite) glinet,gl-ar300m16) ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0" ;; +glinet,gl-mifi) + ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02" + ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" + ;; glinet,gl-x750) ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" ;; diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 1c7ecba5f8..757b0c9974 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -8,6 +8,9 @@ case "$board" in engenius,epg5000) migrate_leds ":wlan-2g=:wlan2g" ":wlan-5g=:wlan5g" ;; +glinet,gl-mifi) + migrate_leds ":net=:3g4g" + ;; tplink,archer-c25-v1|\ tplink,archer-c58-v1|\ tplink,archer-c59-v1|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 5ef6104ef6..0e7efa32af 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -821,6 +821,16 @@ define Device/glinet_gl-ar750 endef TARGET_DEVICES += glinet_gl-ar750 +define Device/glinet_gl-mifi + SOC := ar9331 + DEVICE_VENDOR := GL.iNET + DEVICE_MODEL := GL-MiFi + DEVICE_PACKAGES := kmod-usb-chipidea2 + IMAGE_SIZE := 16000k + SUPPORTED_DEVICES += gl-mifi +endef +TARGET_DEVICES += glinet_gl-mifi + define Device/glinet_gl-x750 SOC := qca9531 DEVICE_VENDOR := GL.iNet