ar71xx: Buffalo WHR-HP-G300N kernel support
The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28567v19.07.3_mercusys_ac12_duma
Gabor Juhos
13 years ago
parent
61441fe2de
commit
9d51cda2db
@ -0,0 +1,24 @@
|
||||
config interface loopback
|
||||
option ifname lo
|
||||
option proto static
|
||||
option ipaddr 127.0.0.1
|
||||
option netmask 255.0.0.0
|
||||
|
||||
config interface lan
|
||||
option ifname eth0
|
||||
option type bridge
|
||||
option proto static
|
||||
option ipaddr 192.168.1.1
|
||||
option netmask 255.255.255.0
|
||||
|
||||
config interface wan
|
||||
option ifname eth1
|
||||
option proto dhcp
|
||||
|
||||
config switch eth0
|
||||
option enable_vlan 1
|
||||
|
||||
config switch_vlan
|
||||
option device eth0
|
||||
option vlan 1
|
||||
option ports "0 1 2 3 4"
|
||||
@ -0,0 +1,171 @@
|
||||
/*
|
||||
* Buffalo WHR-HP-G300N board support
|
||||
*
|
||||
* based on ...
|
||||
*
|
||||
* TP-LINK TL-WR741ND board support
|
||||
*
|
||||
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/mach-ar71xx/ar71xx.h>
|
||||
|
||||
#include "machtype.h"
|
||||
#include "devices.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-ap91-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
|
||||
#define WHRHPG300N_GPIO_LED_SECURITY 0
|
||||
#define WHRHPG300N_GPIO_LED_DIAG 1
|
||||
#define WHRHPG300N_GPIO_LED_ROUTER 6
|
||||
|
||||
#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7
|
||||
#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8
|
||||
#define WHRHPG300N_GPIO_BTN_RESET 11
|
||||
#define WHRHPG300N_GPIO_BTN_AOSS 12
|
||||
|
||||
#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define WHRHPG300N_MAC_OFFSET 0x20c
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
static struct mtd_partition whrhpg300n_partitions[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.offset = 0,
|
||||
.size = 0x03e000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "u-boot-env",
|
||||
.offset = 0x03e000,
|
||||
.size = 0x002000,
|
||||
}, {
|
||||
.name = "kernel",
|
||||
.offset = 0x040000,
|
||||
.size = 0x0e0000,
|
||||
}, {
|
||||
.name = "rootfs",
|
||||
.offset = 0x120000,
|
||||
.size = 0x2c0000,
|
||||
}, {
|
||||
.name = "NVRAM",
|
||||
.offset = 0x3e0000,
|
||||
.size = 0x010000,
|
||||
}, {
|
||||
.name = "ART",
|
||||
.offset = 0x3f0000,
|
||||
.size = 0x010000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "firmware",
|
||||
.offset = 0x040000,
|
||||
.size = 0x3a0000,
|
||||
}
|
||||
};
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
|
||||
static struct flash_platform_data whrhpg300n_flash_data = {
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
.parts = whrhpg300n_partitions,
|
||||
.nr_parts = ARRAY_SIZE(whrhpg300n_partitions),
|
||||
#endif
|
||||
};
|
||||
|
||||
static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "whr-hp-g300n:orange:security",
|
||||
.gpio = WHRHPG300N_GPIO_LED_SECURITY,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "whr-hp-g300n:red:diag",
|
||||
.gpio = WHRHPG300N_GPIO_LED_DIAG,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "whr-hp-g300n:green:router",
|
||||
.gpio = WHRHPG300N_GPIO_LED_ROUTER,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = WHRHPG300N_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "aoss/wps",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_WPS_BUTTON,
|
||||
.gpio = WHRHPG300N_GPIO_BTN_AOSS,
|
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "router_on",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_2,
|
||||
.gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON,
|
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.desc = "router_auto",
|
||||
.type = EV_KEY,
|
||||
.code = BTN_3,
|
||||
.gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
|
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init whrhpg300n_setup(void)
|
||||
{
|
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||
u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
|
||||
|
||||
ar71xx_add_device_m25p80(&whrhpg300n_flash_data);
|
||||
|
||||
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
|
||||
whrhpg300n_leds_gpio);
|
||||
|
||||
ar71xx_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(whrhpg300n_gpio_keys),
|
||||
whrhpg300n_gpio_keys);
|
||||
|
||||
ar71xx_eth1_data.has_ar7240_switch = 1;
|
||||
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
|
||||
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
|
||||
|
||||
/* WAN port */
|
||||
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
|
||||
ar71xx_eth0_data.speed = SPEED_100;
|
||||
ar71xx_eth0_data.duplex = DUPLEX_FULL;
|
||||
ar71xx_eth0_data.phy_mask = BIT(4);
|
||||
|
||||
/* LAN ports */
|
||||
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
|
||||
ar71xx_eth1_data.speed = SPEED_1000;
|
||||
ar71xx_eth1_data.duplex = DUPLEX_FULL;
|
||||
|
||||
ar71xx_add_device_mdio(0x0);
|
||||
ar71xx_add_device_eth(1);
|
||||
ar71xx_add_device_eth(0);
|
||||
|
||||
ap91_pci_setup_wmac_led_pin(1);
|
||||
|
||||
ap91_pci_init(ee, mac);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(AR71XX_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
|
||||
whrhpg300n_setup);
|
||||
Loading…
Reference in New Issue