@ -20,7 +20,7 @@
ccflags-y := -Werror
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/board_livebox.c
@@ -0,0 +1, 228 @@
@@ -0,0 +1, 366 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@ -36,23 +36,30 @@
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ssb/ssb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio_buttons.h>
+#include <linux/ spi/spi .h>
+#include <asm/addrspace.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_dev_uart.h>
+#include <bcm63xx_dev_pci.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_usb_ohci.h>
+#include <bcm63xx_dev_usb_ehci.h>
+#include <bcm63xx_dev_spi.h>
+#include <board_bcm963xx.h>
+
+#define PFX "board_livebox: "
+
+#define LIVEBOX_KEYS_POLL_INTERVAL 20
+#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL (LIVEBOX_KEYS_POLL_INTERVAL * 3)
+
+static unsigned int mac_addr_used = 0;
+static struct board_info board;
+
@ -60,8 +67,8 @@
+ * known 6348 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6348
+static struct board_info __initdata board_livebox = {
+ .name = "Livebox ",
+static struct board_info __initdata board_livebox _blue5g = {
+ .name = "Livebox -blue-5g ",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
@ -75,13 +82,65 @@
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ .has_phy = 1,
+ .phy_id = 3 1,
+ },
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .has_dsp = 0, /*TODO some Liveboxes have dsp*/
+ .dsp = {
+ .gpio_rst = 6, /*FIXME eth1 shares gpio6 with dsp?*/
+ .gpio_int = 35,
+ .cs = 2,
+ .ext_irq = 2,
+ },
+
+ .leds = {
+ {
+ .name = "Livebox-blue-5g::adsl-fail",
+ .gpio = 0,
+ .active_low = 0,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "Livebox-blue-5g::adsl",
+ .gpio = 1,
+ },
+ {
+ .name = "Livebox-blue-5g::traffic",
+ .gpio = 2,
+ },
+ {
+ .name = "Livebox-blue-5g::phone",
+ .gpio = 3,
+ },
+ {
+ .name = "Livebox-blue-5g::wifi",
+ .gpio = 4,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "BTN_1",
+ .gpio = 36,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "BTN_2",
+ .gpio = 7,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
+ },
+
+ },
+};
+#endif
+
@ -90,22 +149,78 @@
+ */
+static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6348
+ &board_livebox
+ &board_livebox _blue5g
+#endif
+};
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+ return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+ u8 *p;
+ int count;
+
+ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
+
+ p = mac + ETH_ALEN - 1;
+ count = mac_addr_used;
+
+ while (count--) {
+ do {
+ (*p)++;
+ if (*p != 0)
+ break;
+ p--;
+ } while (p != mac);
+ }
+
+ if (p == mac) {
+ printk(KERN_ERR PFX "unable to fetch mac address\n");
+ return -ENODEV;
+ }
+ mac_addr_used++;
+
+ return 0;
+}
+
+/*
+ * early init callback
+ */
+#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff
+#define LIVEBOX_BOOT_ADDR 0x1e400000
+
+#define LIVEBOX_HW_BLUE5G_9 0x90
+
+void __init board_prom_init(void)
+{
+ u32 val;
+ u8 hw_version;
+
+ /* Get hardware version */
+ val = bcm_gpio_readl(GPIO_CTL_LO_REG);
+ val &= ~LIVEBOX_GPIO_DETECT_MASK;
+ bcm_gpio_writel(val, GPIO_CTL_LO_REG);
+
+ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
+ switch (hw_version) {
+ case LIVEBOX_HW_BLUE5G_9:
+ printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
+ memcpy(&board, bcm963xx_boards[0], sizeof(board));
+ break;
+ default:
+ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
+ break;
+ }
+
+ /* read base address of boot chip select (0) */
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+
+ /* assume board is a Livebox */
+ /* use default livebox configuration */
+ memcpy(&board, bcm963xx_boards[0], sizeof(board));
+
+ /* setup pin multiplexing depending on board enabled device,
@ -113,12 +228,12 @@
+ * inside arch_initcall */
+ val = 0;
+
+#ifdef CONFIG_PCI
+ if (board.has_pci) {
+ bcm63xx_pci_enabled = 1;
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G2_PCI;
+ }
+
+ #endif
+ if (board.has_pccard) {
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G1_MII_PCCARD;
@ -134,6 +249,10 @@
+ if (BCMCPU_IS_6348())
+ val |= GPIO_MODE_6348_G3_EXT_MII |
+ GPIO_MODE_6348_G0_EXT_MII;
+ printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
+ gpio_request(6, "dsp_eth_rst");
+ gpio_direction_output(6, 0);
+ gpio_set_value(6, 1);
+ }
+
+ bcm_gpio_writel(val, GPIO_MODE_REG);
@ -154,47 +273,6 @@
+ panic("unexpected CPU for bcm963xx board");
+}
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+ return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+
+static int board_get_mac_address(u8 *mac)
+{
+ u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
+ u8 *p;
+ int count;
+
+ memcpy(mac, default_mac, ETH_ALEN);
+
+ p = mac + ETH_ALEN - 1;
+ count = mac_addr_used;
+
+ while (count--) {
+ do {
+ (*p)++;
+ if (*p != 0)
+ break;
+ p--;
+ } while (p != mac);
+ }
+
+ if (p == mac) {
+ printk(KERN_ERR PFX "unable to fetch mac address\n");
+ return -ENODEV;
+ }
+ mac_addr_used++;
+
+ return 0;
+}
+
+static struct resource mtd_resources[] = {
+ {
+ .start = 0, /* filled at runtime */
@ -209,6 +287,23 @@
+ .num_resources = ARRAY_SIZE(mtd_resources),
+};
+
+static struct gpio_led_platform_data bcm63xx_led_data;
+
+static struct platform_device bcm63xx_gpio_leds = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev.platform_data = &bcm63xx_led_data,
+};
+
+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
+ .poll_interval = LIVEBOX_KEYS_POLL_INTERVAL,
+};
+
+static struct platform_device bcm63xx_gpio_keys_device = {
+ .name = "gpio-keys-polled",
+ .id = 0,
+ .dev.platform_data = &bcm63xx_gpio_keys_data,
+};
+
+/*
+ * third stage init callback, register all board devices.
@ -216,10 +311,15 @@
+int __init board_register_devices(void)
+{
+ u32 val;
+ int led_count = 0;
+ int button_count = 0;
+
+ if (board.has_uart0)
+ bcm63xx_uart_register(0);
+
+ if (board.has_uart1)
+ bcm63xx_uart_register(1);
+
+ if (board.has_pccard)
+ bcm63xx_pcmcia_register();
+
@ -231,21 +331,59 @@
+ !board_get_mac_address(board.enet1.mac_addr))
+ bcm63xx_enet_register(1, &board.enet1);
+
+ if (board.has_ehci0)
+ bcm63xx_ehci_register();
+
+ if (board.has_ohci0)
+ bcm63xx_ohci_register();
+
+ if (board.has_ehci0)
+ bcm63xx_ehci_register();
+ if (board.has_dsp)
+ bcm63xx_dsp_register(&board.dsp);
+
+ bcm63xx_spi_register();
+
+ if (board.num_devs)
+ platform_add_devices(board.devs, board.num_devs);
+
+ if (board.num_spis)
+ spi_register_board_info(board.spis, board.num_spis);
+
+
+ /* read base address of boot chip select (0) */
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+ mtd_resources[0].start = val;
+ mtd_resources[0].end = 0x1FFFFFFF;
+ if (val != LIVEBOX_BOOT_ADDR)
+ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
+ val, LIVEBOX_BOOT_ADDR);
+ mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
+ mtd_resources[0].end = 0x1ebfffff;
+
+ platform_device_register(&mtd_dev);
+
+ /* count number of LEDs defined by this device */
+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
+ led_count++;
+
+ bcm63xx_led_data.num_leds = led_count;
+ bcm63xx_led_data.leds = board.leds;
+
+ platform_device_register(&bcm63xx_gpio_leds);
+
+ /* count number of BUTTONs defined by this device */
+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
+ button_count++;
+
+ if (button_count) {
+ bcm63xx_gpio_keys_data.nbuttons = button_count;
+ bcm63xx_gpio_keys_data.buttons = board.buttons;
+
+ platform_device_register(&bcm63xx_gpio_keys_device);
+ }
+
+#ifdef CONFIG_PCI
+ if (board.has_pci)
+ bcm63xx_pci_register();
+#endif
+
+ return 0;
+}
+
Florian Fainelli
12 years ago