kernel: update kernel 4.9 to 4.9.14

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

include/kernel-version.mk

@@ -4,11 +4,11 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .43
 LINUX_VERSION-4.4 = .52
-LINUX_VERSION-4.9 = .13
+LINUX_VERSION-4.9 = .14
 
 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
 LINUX_KERNEL_HASH-4.4.52 = e8d2ddaece73e1a34e045bbdcdcc1383f658e24537797f8d8e0dd520cf1b1f06
-LINUX_KERNEL_HASH-4.9.13 = 36464aec4fb32ed192252645819abb55ceb21eef17b3f7210b4a673e7486a268
+LINUX_KERNEL_HASH-4.9.14 = 534d343f4ca5c55d7214694a2a378897e8ee2adf576563f069da010093b3b640
 
 ifdef KERNEL_PATCHVER
   LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))

target/linux/generic/patches-4.9/040-02-MIPS-Stack-unwinding-while-on-IRQ-stack.patch

@@ -19,7 +19,7 @@ Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
  #include <asm/msa.h>
  #include <asm/pgtable.h>
  #include <asm/mipsregs.h>
-@@ -511,7 +512,19 @@ EXPORT_SYMBOL(unwind_stack_by_address);
+@@ -556,7 +557,19 @@ EXPORT_SYMBOL(unwind_stack_by_address);
  unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
  			   unsigned long pc, unsigned long *ra)
  {

target/linux/generic/patches-4.9/070-bcma-from-4.11.patch

@@ -83,23 +83,3 @@
  		} else {
  			core->dev.dma_mask = &core->dev.coherent_dma_mask;
  			core->dma_dev = &core->dev;
-@@ -633,8 +634,11 @@ static int bcma_device_probe(struct devi
- 					       drv);
- 	int err = 0;
- 
-+	get_device(dev);
- 	if (adrv->probe)
- 		err = adrv->probe(core);
-+	if (err)
-+		put_device(dev);
- 
- 	return err;
- }
-@@ -647,6 +651,7 @@ static int bcma_device_remove(struct dev
- 
- 	if (adrv->remove)
- 		adrv->remove(core);
-+	put_device(dev);
- 
- 	return 0;
- }

target/linux/ipq806x/patches-4.9/0009-spi-qup-Fix-block-mode-to-work-correctly.patch

@@ -49,11 +49,11 @@ Signed-off-by: Andy Gross <andy.gross@linaro.org>
 -	int idx, shift, w_size;
 -
 -	w_size = controller->w_size;
--
--	while (controller->rx_bytes < xfer->len) {
 +	int i, shift, num_bytes;
 +	u32 word;
  
+-	while (controller->rx_bytes < xfer->len) {
+-
 -		state = readl_relaxed(controller->base + QUP_OPERATIONAL);
 -		if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY))
 -			break;
@@ -95,20 +95,16 @@ Signed-off-by: Andy Gross <andy.gross@linaro.org>
 -	int idx, w_size;
 +	u32 remainder, words_per_block, num_words;
 +	bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
- 
--	w_size = controller->w_size;
++
 +	remainder = DIV_ROUND_UP(xfer->len - controller->rx_bytes,
 +				 controller->w_size);
 +	words_per_block = controller->in_blk_sz >> 2;
- 
--	while (controller->tx_bytes < xfer->len) {
++
 +	do {
 +		/* ACK by clearing service flag */
 +		writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
 +			       controller->base + QUP_OPERATIONAL);
- 
--		state = readl_relaxed(controller->base + QUP_OPERATIONAL);
--		if (state & QUP_OP_OUT_FIFO_FULL)
++
 +		if (is_block_mode) {
 +			num_words = (remainder > words_per_block) ?
 +					words_per_block : remainder;
@@ -116,15 +112,19 @@ Signed-off-by: Andy Gross <andy.gross@linaro.org>
 +			if (!spi_qup_is_flag_set(controller,
 +						 QUP_OP_IN_FIFO_NOT_EMPTY))
 +				break;
-+
+ 
+-	w_size = controller->w_size;
 +			num_words = 1;
 +		}
 +
 +		/* read up to the maximum transfer size available */
 +		spi_qup_read_from_fifo(controller, xfer, num_words);
-+
+ 
+-	while (controller->tx_bytes < xfer->len) {
 +		remainder -= num_words;
-+
+ 
+-		state = readl_relaxed(controller->base + QUP_OPERATIONAL);
+-		if (state & QUP_OP_OUT_FIFO_FULL)
 +		/* if block mode, check to see if next block is available */
 +		if (is_block_mode && !spi_qup_is_flag_set(controller,
 +					QUP_OP_IN_BLOCK_READ_REQ))

target/linux/ipq806x/patches-4.9/0012-spi-qup-refactor-spi_qup_io_config-in-two-functions.patch

@@ -67,14 +67,10 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 -		/* must be zero for BLOCK and BAM */
 -		writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
 -		writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
-+	else
-+		controller->mode = QUP_IO_M_MODE_BLOCK;
- 
+-
 -		if (!controller->qup_v1) {
 -			void __iomem *input_cnt;
-+	return 0;
-+}
- 
+-
 -			input_cnt = controller->base + QUP_MX_INPUT_CNT;
 -			/*
 -			 * for DMA transfers, both QUP_MX_INPUT_CNT and
@@ -86,13 +82,19 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 -				writel_relaxed(0, input_cnt);
 -			else
 -				writel_relaxed(n_words, input_cnt);
++	else
++		controller->mode = QUP_IO_M_MODE_BLOCK;
++
++	return 0;
++}
+ 
 +/* prep qup for another spi transaction of specific type */
 +static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 +{
 +	struct spi_qup *controller = spi_master_get_devdata(spi->master);
 +	u32 config, iomode, control;
 +	unsigned long flags;
- 
++
 +	reinit_completion(&controller->done);
 +	reinit_completion(&controller->dma_tx_done);
 +

target/linux/ipq806x/patches-4.9/0014-spi-qup-allow-block-mode-to-generate-multiple-transa.patch

@@ -173,37 +173,37 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 +			qup->n_words = SPI_MAX_XFER;
 +		else
 +			qup->n_words = n_words % SPI_MAX_XFER;
- 
--	if (qup->mode == QUP_IO_M_MODE_FIFO)
--		spi_qup_write(qup, xfer);
++
 +		if (qup->tx_buf && offset)
 +			qup->tx_buf = xfer->tx_buf + offset * SPI_MAX_XFER;
- 
--	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
--	if (ret) {
--		dev_warn(qup->dev, "cannot set RUN state\n");
--		return ret;
--	}
++
 +		if (qup->rx_buf && offset)
 +			qup->rx_buf = xfer->rx_buf + offset * SPI_MAX_XFER;
- 
--	if (!wait_for_completion_timeout(&qup->done, timeout))
--		return -ETIMEDOUT;
++
 +		/* if the transaction is small enough, we need
 +		 * to fallback to FIFO mode */
 +		if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
 +			qup->mode = QUP_IO_M_MODE_FIFO;
-+
+ 
+-	if (qup->mode == QUP_IO_M_MODE_FIFO)
+-		spi_qup_write(qup, xfer);
 +		ret = spi_qup_io_config(spi, xfer);
 +		if (ret)
 +			return ret;
-+
+ 
+-	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+-	if (ret) {
+-		dev_warn(qup->dev, "cannot set RUN state\n");
+-		return ret;
+-	}
 +		ret = spi_qup_set_state(qup, QUP_STATE_RUN);
 +		if (ret) {
 +			dev_warn(qup->dev, "cannot set RUN state\n");
 +			return ret;
 +		}
-+
+ 
+-	if (!wait_for_completion_timeout(&qup->done, timeout))
+-		return -ETIMEDOUT;
 +		ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
 +		if (ret) {
 +			dev_warn(qup->dev, "cannot set PAUSE state\n");

target/linux/ipq806x/patches-4.9/0016-spi-qup-allow-mulitple-DMA-transactions-per-spi-xfer.patch

@@ -44,54 +44,58 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 -	ret = spi_qup_io_config(spi, xfer);
 -	if (ret)
 -		return ret;
-+	rx_sgl = xfer->rx_sg.sgl;
-+	tx_sgl = xfer->tx_sg.sgl;
- 
+-
 -	/* before issuing the descriptors, set the QUP to run */
 -	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
 -	if (ret) {
 -		dev_warn(qup->dev, "cannot set RUN state\n");
 -		return ret;
 -	}
-+	do {
-+		int rx_nents = 0, tx_nents = 0;
- 
+-
 -	if (!qup->qup_v1) {
 -		if (xfer->rx_buf)
 -			rx_done = spi_qup_dma_done;
-+		if (rx_sgl) {
-+			rx_nents = sg_nents_for_len(rx_sgl, SPI_MAX_XFER);
-+			if (rx_nents < 0)
-+				rx_nents = sg_nents(rx_sgl);
- 
+-
 -		if (xfer->tx_buf)
 -			tx_done = spi_qup_dma_done;
 -	}
-+			qup->n_words = spi_qup_sgl_get_size(rx_sgl, rx_nents) /
-+						qup->w_size;
-+		}
- 
+-
 -	if (xfer->rx_buf) {
 -		ret = spi_qup_prep_sg(master, xfer->rx_sg.sgl,
 -				      xfer->rx_sg.nents, DMA_DEV_TO_MEM,
 -				      rx_done, &qup->done);
 -		if (ret)
 -			return ret;
-+		if (tx_sgl) {
-+			tx_nents = sg_nents_for_len(tx_sgl, SPI_MAX_XFER);
-+			if (tx_nents < 0)
-+				tx_nents = sg_nents(tx_sgl);
++	rx_sgl = xfer->rx_sg.sgl;
++	tx_sgl = xfer->tx_sg.sgl;
  
 -		dma_async_issue_pending(master->dma_rx);
 -	}
-+			qup->n_words = spi_qup_sgl_get_size(tx_sgl, tx_nents) /
-+						qup->w_size;
-+		}
++	do {
++		int rx_nents = 0, tx_nents = 0;
  
 -	if (xfer->tx_buf) {
 -		ret = spi_qup_prep_sg(master, xfer->tx_sg.sgl,
 -				      xfer->tx_sg.nents, DMA_MEM_TO_DEV,
 -				      tx_done, &qup->dma_tx_done);
++		if (rx_sgl) {
++			rx_nents = sg_nents_for_len(rx_sgl, SPI_MAX_XFER);
++			if (rx_nents < 0)
++				rx_nents = sg_nents(rx_sgl);
++
++			qup->n_words = spi_qup_sgl_get_size(rx_sgl, rx_nents) /
++						qup->w_size;
++		}
++
++		if (tx_sgl) {
++			tx_nents = sg_nents_for_len(tx_sgl, SPI_MAX_XFER);
++			if (tx_nents < 0)
++				tx_nents = sg_nents(tx_sgl);
++
++			qup->n_words = spi_qup_sgl_get_size(tx_sgl, tx_nents) /
++						qup->w_size;
++		}
++
 +
 +		ret = spi_qup_io_config(spi, xfer);
  		if (ret)
@@ -105,22 +109,17 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 +			dev_warn(qup->dev, "cannot set RUN state\n");
 +			return ret;
 +		}
- 
--	if (xfer->rx_buf && !wait_for_completion_timeout(&qup->done, timeout))
--		return -ETIMEDOUT;
++
 +		if (!qup->qup_v1) {
 +			if (rx_sgl) {
 +				rx_done = spi_qup_dma_done;
 +			}
- 
--	if (xfer->tx_buf && !wait_for_completion_timeout(&qup->dma_tx_done, timeout))
--		ret = -ETIMEDOUT;
++
 +			if (tx_sgl) {
 +				tx_done = spi_qup_dma_done;
 +			}
 +		}
- 
--	return ret;
++
 +		if (rx_sgl) {
 +			ret = spi_qup_prep_sg(master, rx_sgl, rx_nents,
 +					      DMA_DEV_TO_MEM, rx_done,
@@ -150,12 +149,17 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 +			pr_emerg(" tx timed out\n");
 +			return -ETIMEDOUT;
 +		}
-+
+ 
+-	if (xfer->rx_buf && !wait_for_completion_timeout(&qup->done, timeout))
+-		return -ETIMEDOUT;
 +		for (; rx_sgl && rx_nents--; rx_sgl = sg_next(rx_sgl));
 +		for (; tx_sgl && tx_nents--; tx_sgl = sg_next(tx_sgl));
-+
+ 
+-	if (xfer->tx_buf && !wait_for_completion_timeout(&qup->dma_tx_done, timeout))
+-		ret = -ETIMEDOUT;
 +	} while (rx_sgl || tx_sgl);
-+
+ 
+-	return ret;
 +	return 0;
  }
  

target/linux/ipq806x/patches-4.9/999-dts.patch

@@ -154,10 +154,7 @@
 +					0x00094 0x4e        /* PORT6_STATUS */
 +					>;
 +			};
- 
--				nand-ecc-strength = <4>;
--				nand-ecc-step-size = <512>;
--				nand-bus-width = <8>;
++
 +			phy4: ethernet-phy@4 {
 +				device_type = "ethernet-phy";
 +				reg = <4>;
@@ -182,7 +179,10 @@
 +			status = "ok";
 +			phy-mode = "sgmii";
 +			qcom,id = <2>;
-+
+ 
+-				nand-ecc-strength = <4>;
+-				nand-ecc-step-size = <512>;
+-				nand-bus-width = <8>;
 +			fixed-link {
 +				speed = <1000>;
 +				full-duplex;

target/linux/lantiq/patches-4.9/0070-MIPS-Lantiq-Keep-ethernet-enabled-during-boot.patch

@@ -1,53 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 19 Jan 2017 14:14:36 +0100
-Subject: [PATCH] MIPS: Lantiq: Keep ethernet enabled during boot
-
-Disabling ethernet during reboot (only to enable it again when the
-ethernet driver attaches) can put the chip into a faulty state where it
-corrupts the header of all incoming packets.
-
-This happens if packets arrive during the time window where the core is
-disabled, and it can be easily reproduced by rebooting while sending a
-flood ping to the broadcast address.
-
-Cc: john@phrozen.org
-Cc: hauke.mehrtens@lantiq.com
-Cc: stable@vger.kernel.org
-Fixes: 95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -564,7 +564,7 @@ void __init ltq_soc_init(void)
- 		clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
- 		clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
- 		clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
--		clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP);
-+		clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
- 		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- 	} else if (of_machine_is_compatible("lantiq,ar10")) {
-@@ -572,7 +572,7 @@ void __init ltq_soc_init(void)
- 				  ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
- 		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
- 		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
--		clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH |
-+		clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH |
- 			       PMU_PPE_DP | PMU_PPE_TC);
- 		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- 		clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
-@@ -594,11 +594,11 @@ void __init ltq_soc_init(void)
- 		clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
- 
- 		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
--		clkdev_add_pmu("1e108000.eth", NULL, 1, 0,
-+		clkdev_add_pmu("1e108000.eth", NULL, 0, 0,
- 				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- 				PMU_PPE_QSB | PMU_PPE_TOP);
--		clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
-+		clkdev_add_pmu("1f203000.rcu", "gphy", 0, 0, PMU_GPHY);
- 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
- 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);

target/linux/mediatek/patches-4.9/0000-pinctrl-esw.patch

@@ -1,7 +1,5 @@
-Index: linux-4.9.13/include/dt-bindings/pinctrl/mt7623-pinfunc.h
-===================================================================
---- linux-4.9.13.orig/include/dt-bindings/pinctrl/mt7623-pinfunc.h
-+++ linux-4.9.13/include/dt-bindings/pinctrl/mt7623-pinfunc.h
+--- a/include/dt-bindings/pinctrl/mt7623-pinfunc.h
++++ b/include/dt-bindings/pinctrl/mt7623-pinfunc.h
 @@ -505,6 +505,9 @@
  #define MT7623_PIN_272_G2_RXD3_FUNC_GPIO272 (MTK_PIN_NO(272) | 0)
  #define MT7623_PIN_272_G2_RXD3_FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1)
@@ -12,10 +10,8 @@ Index: linux-4.9.13/include/dt-bindings/pinctrl/mt7623-pinfunc.h
  #define MT7623_PIN_274_G2_RXDV_FUNC_GPIO274 (MTK_PIN_NO(274) | 0)
  #define MT7623_PIN_274_G2_RXDV_FUNC_G2_RXDV (MTK_PIN_NO(274) | 1)
  
-Index: linux-4.9.13/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h
-===================================================================
---- linux-4.9.13.orig/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h
-+++ linux-4.9.13/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h
+--- a/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h
++++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt7623.h
 @@ -1894,8 +1894,9 @@ static const struct mtk_desc_pin mtk_pin
  	MTK_PIN(
  		PINCTRL_PIN(273, "GPIO273"),

target/linux/mediatek/patches-4.9/0001-NET-multi-phy-support.patch

@@ -11,7 +11,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/net/phy/phy.c
 +++ b/drivers/net/phy/phy.c
-@@ -890,7 +890,8 @@ void phy_state_machine(struct work_struc
+@@ -996,7 +996,8 @@ void phy_state_machine(struct work_struc
  		/* If the link is down, give up on negotiation for now */
  		if (!phydev->link) {
  			phydev->state = PHY_NOLINK;
@@ -21,7 +21,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  			phydev->adjust_link(phydev->attached_dev);
  			break;
  		}
-@@ -973,7 +974,8 @@ void phy_state_machine(struct work_struc
+@@ -1079,7 +1080,8 @@ void phy_state_machine(struct work_struc
  			netif_carrier_on(phydev->attached_dev);
  		} else {
  			phydev->state = PHY_NOLINK;
@@ -31,7 +31,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  		}
  
  		phydev->adjust_link(phydev->attached_dev);
-@@ -985,7 +987,8 @@ void phy_state_machine(struct work_struc
+@@ -1091,7 +1093,8 @@ void phy_state_machine(struct work_struc
  	case PHY_HALTED:
  		if (phydev->link) {
  			phydev->link = 0;
@@ -43,7 +43,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  		}
 --- a/include/linux/phy.h
 +++ b/include/linux/phy.h
-@@ -377,6 +377,7 @@ struct phy_device {
+@@ -373,6 +373,7 @@ struct phy_device {
  	bool is_pseudo_fixed_link;
  	bool has_fixups;
  	bool suspended;

target/linux/mediatek/patches-4.9/0009-clk-mediatek-Add-MT2701-clock-support.patch

@@ -21,7 +21,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
 
 --- a/drivers/clk/mediatek/Kconfig
 +++ b/drivers/clk/mediatek/Kconfig
-@@ -6,6 +6,14 @@
+@@ -6,6 +6,14 @@ config COMMON_CLK_MEDIATEK
  	---help---
  	  Mediatek SoCs' clock support.
  
@@ -46,7 +46,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
  obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
 --- a/drivers/clk/mediatek/clk-gate.c
 +++ b/drivers/clk/mediatek/clk-gate.c
-@@ -61,6 +61,26 @@
+@@ -61,6 +61,26 @@ static void mtk_cg_clr_bit(struct clk_hw
  	regmap_write(cg->regmap, cg->clr_ofs, BIT(cg->bit));
  }
  
@@ -73,7 +73,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
  static int mtk_cg_enable(struct clk_hw *hw)
  {
  	mtk_cg_clr_bit(hw);
-@@ -85,6 +105,30 @@
+@@ -85,6 +105,30 @@ static void mtk_cg_disable_inv(struct cl
  	mtk_cg_clr_bit(hw);
  }
  
@@ -104,7 +104,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
  const struct clk_ops mtk_clk_gate_ops_setclr = {
  	.is_enabled	= mtk_cg_bit_is_cleared,
  	.enable		= mtk_cg_enable,
-@@ -97,6 +141,18 @@
+@@ -97,6 +141,18 @@ const struct clk_ops mtk_clk_gate_ops_se
  	.disable	= mtk_cg_disable_inv,
  };
  
@@ -125,7 +125,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
  		const char *parent_name,
 --- a/drivers/clk/mediatek/clk-gate.h
 +++ b/drivers/clk/mediatek/clk-gate.h
-@@ -36,6 +36,8 @@
+@@ -36,6 +36,8 @@ static inline struct mtk_clk_gate *to_mt
  
  extern const struct clk_ops mtk_clk_gate_ops_setclr;
  extern const struct clk_ops mtk_clk_gate_ops_setclr_inv;
@@ -1349,7 +1349,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
 +							mtk_apmixedsys_init);
 --- a/drivers/clk/mediatek/clk-mtk.c
 +++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -244,3 +244,28 @@
+@@ -244,3 +244,28 @@ void mtk_clk_register_composites(const s
  			clk_data->clks[mc->id] = clk;
  	}
  }
@@ -1380,7 +1380,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
 +}
 --- a/drivers/clk/mediatek/clk-mtk.h
 +++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -121,7 +121,8 @@
+@@ -121,7 +121,8 @@ struct mtk_composite {
  		.flags = CLK_SET_RATE_PARENT,				\
  	}
  
@@ -1390,7 +1390,7 @@ Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
  		.id = _id,						\
  		.parent = _parent,					\
  		.name = _name,						\
-@@ -156,8 +157,36 @@
+@@ -156,8 +157,36 @@ struct mtk_gate {
  	const struct clk_ops *ops;
  };
  

target/linux/mediatek/patches-4.9/0012-ARM-mediatek-Add-MT2701-config-options-for-mediatek-.patch

@@ -16,7 +16,7 @@ Acked-by: Linus Walleij <linus.walleij@linaro.org>
 
 --- a/arch/arm/mach-mediatek/Kconfig
 +++ b/arch/arm/mach-mediatek/Kconfig
-@@ -14,6 +14,10 @@
+@@ -14,6 +14,10 @@ config MACH_MT2701
  	bool "MediaTek MT2701 SoCs support"
  	default ARCH_MEDIATEK
  

target/linux/mediatek/patches-4.9/0017-clk-add-hifsys-reset.patch

@@ -20,7 +20,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/clk/mediatek/clk-mt2701.c
 +++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -1000,6 +1000,8 @@
+@@ -1000,6 +1000,8 @@ static void __init mtk_hifsys_init(struc
  	if (r)
  		pr_err("%s(): could not register clock provider: %d\n",
  			__func__, r);

target/linux/mediatek/patches-4.9/0025-PCI-mediatek-add-support-for-PCIe-found-on-MT7623-MT.patch

@@ -19,7 +19,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/arch/arm/mach-mediatek/Kconfig
 +++ b/arch/arm/mach-mediatek/Kconfig
-@@ -29,6 +29,7 @@
+@@ -29,6 +29,7 @@ config MACH_MT6592
  config MACH_MT7623
  	bool "MediaTek MT7623 SoCs support"
  	default ARCH_MEDIATEK
@@ -29,7 +29,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	bool "MediaTek MT8127 SoCs support"
 --- a/drivers/pci/host/Kconfig
 +++ b/drivers/pci/host/Kconfig
-@@ -301,4 +301,15 @@
+@@ -301,4 +301,15 @@ config VMD
  	  To compile this driver as a module, choose M here: the
  	  module will be called vmd.
  
@@ -47,7 +47,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  endmenu
 --- a/drivers/pci/host/Makefile
 +++ b/drivers/pci/host/Makefile
-@@ -33,3 +33,4 @@
+@@ -33,3 +33,4 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-arm
  obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
  obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
  obj-$(CONFIG_VMD) += vmd.o

target/linux/mediatek/patches-4.9/0026-scpsys-various-fixes.patch

@@ -11,7 +11,7 @@ Subject: [PATCH 026/102] scpsys: various fixes
 
 --- a/drivers/clk/mediatek/clk-mt2701.c
 +++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -1043,6 +1043,8 @@
+@@ -1043,6 +1043,8 @@ static void __init mtk_ethsys_init(struc
  	if (r)
  		pr_err("%s(): could not register clock provider: %d\n",
  			__func__, r);

target/linux/mediatek/patches-4.9/0052-clk-dont-disable-unused-clocks.patch

@@ -10,8 +10,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/clk/clk.c
 +++ b/drivers/clk/clk.c
-@@ -233,7 +233,7 @@ unlock_out:
- 	clk_enable_unlock(flags);
+@@ -796,7 +796,7 @@ unlock_out:
+ 		clk_core_disable_unprepare(core->parent);
  }
  
 -static bool clk_ignore_unused;

target/linux/mediatek/patches-4.9/0054-clk-mediatek-Export-CPU-mux-clocks-for-CPU-frequency.patch

@@ -193,7 +193,7 @@ Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
  
  #include <dt-bindings/clock/mt2701-clk.h>
  
-@@ -465,6 +466,10 @@
+@@ -465,6 +466,10 @@ static const char * const cpu_parents[]
  	"mmpll"
  };
  
@@ -204,7 +204,7 @@ Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
  static const struct mtk_composite top_muxes[] __initconst = {
  	MUX_GATE(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
  		0x0040, 0, 3, INVALID_MUX_GATE_BIT),
-@@ -677,6 +682,9 @@
+@@ -677,6 +682,9 @@ static void __init mtk_infrasys_init(str
  	mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
  						clk_data);
  
@@ -224,7 +224,7 @@ Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
  
  #include <dt-bindings/clock/mt8173-clk.h>
  
-@@ -525,6 +526,25 @@
+@@ -525,6 +526,25 @@ static const char * const i2s3_b_ck_pare
  	"apll2_div5"
  };
  
@@ -250,7 +250,7 @@ Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
  static const struct mtk_composite top_muxes[] __initconst = {
  	/* CLK_CFG_0 */
  	MUX(CLK_TOP_AXI_SEL, "axi_sel", axi_parents, 0x0040, 0, 3),
-@@ -948,6 +968,9 @@
+@@ -948,6 +968,9 @@ static void __init mtk_infrasys_init(str
  						clk_data);
  	mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
  

target/linux/mediatek/patches-4.9/0055-cpufreq-mediatek-add-driver.patch

@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/drivers/cpufreq/Kconfig.arm
 +++ b/drivers/cpufreq/Kconfig.arm
-@@ -81,6 +81,15 @@ config ARM_KIRKWOOD_CPUFREQ
+@@ -74,6 +74,15 @@ config ARM_KIRKWOOD_CPUFREQ
  	  This adds the CPUFreq driver for Marvell Kirkwood
  	  SoCs.
  
@@ -27,11 +27,11 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	  This adds the CPUFreq driver support for Mediatek MT7623 SoC.
 +
  config ARM_MT8173_CPUFREQ
- 	bool "Mediatek MT8173 CPUFreq support"
+ 	tristate "Mediatek MT8173 CPUFreq support"
  	depends on ARCH_MEDIATEK && REGULATOR
 --- a/drivers/cpufreq/Makefile
 +++ b/drivers/cpufreq/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ)	+= h
+@@ -58,6 +58,7 @@ obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= hi
  obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
  obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
  obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o

target/linux/mediatek/patches-4.9/0071-pwm-add-pwm-mediatek.patch

@@ -43,7 +43,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +};*/
 --- a/drivers/pwm/Kconfig
 +++ b/drivers/pwm/Kconfig
-@@ -282,6 +282,15 @@
+@@ -282,6 +282,15 @@ config PWM_MTK_DISP
  	  To compile this driver as a module, choose M here: the module
  	  will be called pwm-mtk-disp.
  
@@ -61,7 +61,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
  	depends on ARCH_MXS && OF
 --- a/drivers/pwm/Makefile
 +++ b/drivers/pwm/Makefile
-@@ -25,6 +25,7 @@
+@@ -25,6 +25,7 @@ obj-$(CONFIG_PWM_LPSS)		+= pwm-lpss.o
  obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
  obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
  obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o

target/linux/mediatek/patches-4.9/0101-net-mediatek-add-gsw-mt7530-driver.patch

@@ -2213,7 +2213,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  static int mtk_msg_level = -1;
  module_param_named(msg_level, mtk_msg_level, int, 0);
  MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
-@@ -74,14 +77,14 @@
+@@ -74,14 +77,14 @@ static int mtk_mdio_busy_wait(struct mtk
  			return 0;
  		if (time_after(jiffies, t_start + PHY_IAC_TIMEOUT))
  			break;
@@ -2230,7 +2230,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  			   u32 phy_register, u32 write_data)
  {
  	if (mtk_mdio_busy_wait(eth))
-@@ -100,7 +103,7 @@
+@@ -100,7 +103,7 @@ static u32 _mtk_mdio_write(struct mtk_et
  	return 0;
  }
  
@@ -2239,7 +2239,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  {
  	u32 d;
  
-@@ -155,7 +158,7 @@
+@@ -155,7 +158,7 @@ static void mtk_gmac0_rgmii_adjust(struc
  
  	val = (speed == SPEED_1000) ?
  		RCK_CTRL_RGMII_1000 : RCK_CTRL_RGMII_10_100;
@@ -2248,7 +2248,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	val = (speed == SPEED_1000) ?
  		TCK_CTRL_RGMII_1000 : TCK_CTRL_RGMII_10_100;
-@@ -1833,15 +1836,6 @@
+@@ -1833,15 +1836,6 @@ static int mtk_hw_init(struct mtk_eth *e
  	}
  	regmap_write(eth->ethsys, ETHSYS_SYSCFG0, val);
  
@@ -2264,7 +2264,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	/* GE1, Force 1000M/FD, FC ON */
  	mtk_w32(eth, MAC_MCR_FIXED_LINK, MTK_MAC_MCR(0));
  
-@@ -1851,6 +1845,8 @@
+@@ -1851,6 +1845,8 @@ static int mtk_hw_init(struct mtk_eth *e
  	/* Enable RX VLan Offloading */
  	mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
  
@@ -2273,7 +2273,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	/* disable delay and normal interrupt */
  	mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
  	mtk_w32(eth, 0, MTK_PDMA_DELAY_INT);
-@@ -1879,6 +1875,8 @@
+@@ -1879,6 +1875,8 @@ static int mtk_hw_init(struct mtk_eth *e
  		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
  	}
  
@@ -2282,7 +2282,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	return 0;
  }
  
-@@ -2379,6 +2377,9 @@
+@@ -2379,6 +2377,9 @@ static int mtk_probe(struct platform_dev
  	if (!eth)
  		return -ENOMEM;
  
@@ -2303,7 +2303,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #define DQSI0(x)		((x << 0) & GENMASK(6, 0))
  #define DQSI1(x)		((x << 8) & GENMASK(14, 8))
  #define RXCTL_DMWTLAT(x)	((x << 16) & GENMASK(18, 16))
-@@ -554,6 +554,9 @@
+@@ -554,6 +554,9 @@ struct mtk_eth {
  	struct mii_bus			*mii_bus;
  	struct work_struct		pending_work;
  	unsigned long			state;
@@ -2313,7 +2313,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  };
  
  /* struct mtk_mac -	the structure that holds the info about the MACs of the
-@@ -586,4 +589,6 @@
+@@ -586,4 +589,6 @@ void mtk_stats_update_mac(struct mtk_mac
  void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
  u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
  

target/linux/mediatek/patches-4.9/0103-nand_fixes.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/nand/mtk_nand.c
 +++ b/drivers/mtd/nand/mtk_nand.c
-@@ -1017,8 +1017,8 @@ static int mtk_nfc_ooblayout_free(struct
+@@ -1073,8 +1073,8 @@ static int mtk_nfc_ooblayout_free(struct
  	if (section >= eccsteps)
  		return -ERANGE;
  
@@ -11,7 +11,7 @@
  
  	return 0;
  }
-@@ -1058,7 +1058,7 @@ static void mtk_nfc_set_fdm(struct mtk_n
+@@ -1114,7 +1114,7 @@ static void mtk_nfc_set_fdm(struct mtk_n
  		fdm->reg_size = NFI_FDM_MAX_SIZE;
  
  	/* bad block mark storage */

target/linux/mediatek/patches-4.9/0200-devicetree.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -775,6 +775,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+@@ -950,6 +950,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
  	mt6589-aquaris5.dtb \
  	mt6592-evb.dtb \
  	mt7623-evb.dtb \

target/linux/mvebu/patches-4.9/004-add_sata_disk_activity_trigger.patch

@@ -17,8 +17,6 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
  arch/arm/boot/dts/armada-xp-linksys-mamba.dts   | 1 +
  3 files changed, 3 insertions(+)
 
-diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-index f3cee91..a1b6e68 100644
 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
 +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
 @@ -315,6 +315,7 @@
@@ -29,8 +27,6 @@ index f3cee91..a1b6e68 100644
  		};
  	};
  };
-diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-index 1110718..a1a75af 100644
 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
 +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
 @@ -315,6 +315,7 @@
@@ -41,8 +37,6 @@ index 1110718..a1a75af 100644
  		};
  	};
  };
-diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-index 42ea876..3744ba3 100644
 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
 +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
 @@ -266,6 +266,7 @@
@@ -53,6 +47,3 @@ index 42ea876..3744ba3 100644
  					};
  
  					usb2@5 {
--- 
-2.9.3
-

target/linux/mvebu/patches-4.9/104-linksys_mamba_disable_keep_config.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
 +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -298,7 +298,6 @@
+@@ -299,7 +299,6 @@
  			nand@d0000 {
  				status = "okay";
  				num-cs = <1>;

target/linux/mvebu/patches-4.9/106-enable-bm-on-linksys-devices.patch

@@ -94,7 +94,7 @@
  			/* USB part of the eSATA/USB 2.0 port */
  			usb@50000 {
  				status = "okay";
-@@ -367,6 +378,10 @@
+@@ -368,6 +379,10 @@
  				};
  			};
  		};

target/linux/mvebu/patches-4.9/204-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch

@@ -9,7 +9,7 @@ Signed-off-by: Andrew Lunn <andrew@lunn.ch>
 
 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
 +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -416,13 +416,11 @@
+@@ -417,13 +417,11 @@
  		};
  	};