From 93bfac468e9917ecc97ee24700cb50104feb441d Mon Sep 17 00:00:00 2001 From: Chris Blake Date: Fri, 20 Oct 2017 10:32:37 -0500 Subject: [PATCH] mpc85xx: update HiveAP-330 dts initramfs is not the proper name for this, as it stores a boot ramdisk and not a filesystem. Update the name to reflect it's usage correctly. If CMDLINE_OVERRIDE is enabled, the chosen bootargs aren't used at all. Drop them from the device tree source file to not cause confusion. Remove the noinitrd bootarg. Due to the empty ramdisk this parameter isn't required any longer: [ 0.000000] Initrd not found or empty - disabling initrd Use the LEDE mtd-mac-address* device tree properties to set the interfaces MAC-Addresses. Signed-off-by: Chris Blake Signed-off-by: Mathias Kresin --- .../lib/preinit/05_set_iface_mac_mcp85xx | 17 ----------------- .../files/arch/powerpc/boot/dts/hiveap-330.dts | 11 ++++++----- 2 files changed, 6 insertions(+), 22 deletions(-) delete mode 100644 target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx diff --git a/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx b/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx deleted file mode 100644 index cecaee86b0..0000000000 --- a/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh -. /lib/functions/system.sh - -preinit_set_mac_address() { - case $(board_name) in - hiveap-330) - mac_wan=$(mtd_get_mac_binary hw-info 0) - [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan" - mac_lan=$(macaddr_add $(mtd_get_mac_binary hw-info 0) +1) - [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan" - ;; - esac -} - -boot_hook_add preinit_main preinit_set_mac_address diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts index 7900c40c7e..5e732664aa 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts @@ -15,8 +15,7 @@ compatible = "aerohive,hiveap-330"; chosen { - bootargs = "console=ttyS0,9600"; - bootargs-override = "console=ttyS0,9600 noinitrd"; + bootargs-override = "console=ttyS0,9600"; }; memory { @@ -42,7 +41,7 @@ partition@40000 { reg = <0x40000 0x40000>; - label = "initramfs"; + label = "initrd"; }; partition@80000 { @@ -61,7 +60,7 @@ read-only; }; - partition@3f00000 { + hwinfo: partition@3f00000 { reg = <0x3f00000 0x20000>; label = "hw-info"; read-only; @@ -158,7 +157,7 @@ status = "okay"; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - + mtd-mac-address = <&hwinfo 0>; }; enet1: ethernet@b1000 { @@ -169,6 +168,8 @@ status = "okay"; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; + mtd-mac-address = <&hwinfo 0>; + mtd-mac-address-increment = <1>; }; gpio0: gpio-controller@fc00 {