lantiq: fix etop compiler warnings

The following warnings are introduced by our own patches:

 lantiq_etop.c:173:1: warning: no semicolon at end of struct or union
 };
 ^
 lantiq_etop.c: In function 'ltq_etop_change_mtu':
 lantiq_etop.c:725:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
  int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
  ^~~

Signed-off-by: Mathias Kresin <dev@kresin.me>
master
Mathias Kresin 5 years ago
parent a4bdae7cf2
commit 92b768d5f4

@ -178,7 +178,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ struct clk *clk_ppe;
+ struct clk *clk_switch;
+ struct clk *clk_ephy;
+ struct clk *clk_ephycgu
+ struct clk *clk_ephycgu;
};
+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
@ -683,11 +683,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
netif_tx_stop_queue(txq);
return NETDEV_TX_OK;
@@ -518,8 +712,10 @@ ltq_etop_change_mtu(struct net_device *d
@@ -515,11 +709,14 @@ ltq_etop_change_mtu(struct net_device *d
{
struct ltq_etop_priv *priv = netdev_priv(dev);
unsigned long flags;
+ int max;
dev->mtu = new_mtu;
+ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
+ max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
+
spin_lock_irqsave(&priv->lock, flags);
- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, LTQ_ETOP_IGPLEN);
@ -695,7 +699,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
@@ -579,6 +775,9 @@ ltq_etop_init(struct net_device *dev)
@@ -579,6 +776,9 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
ltq_etop_change_mtu(dev, 1500);
@ -705,7 +709,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
if (!is_valid_ether_addr(mac.sa_data)) {
@@ -596,9 +795,10 @@ ltq_etop_init(struct net_device *dev)
@@ -596,9 +796,10 @@ ltq_etop_init(struct net_device *dev)
dev->addr_assign_type = NET_ADDR_RANDOM;
ltq_etop_set_multicast_list(dev);
@ -719,7 +723,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return 0;
err_netdev:
@@ -618,6 +818,9 @@ ltq_etop_tx_timeout(struct net_device *d
@@ -618,6 +819,9 @@ ltq_etop_tx_timeout(struct net_device *d
err = ltq_etop_hw_init(dev);
if (err)
goto err_hw;
@ -729,7 +733,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
netif_trans_update(dev);
netif_wake_queue(dev);
return;
@@ -641,14 +844,19 @@ static const struct net_device_ops ltq_e
@@ -641,14 +845,19 @@ static const struct net_device_ops ltq_e
.ndo_tx_timeout = ltq_etop_tx_timeout,
};
@ -753,7 +757,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -674,31 +882,62 @@ ltq_etop_probe(struct platform_device *p
@@ -674,31 +883,62 @@ ltq_etop_probe(struct platform_device *p
goto err_out;
}
@ -831,7 +835,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
err = register_netdev(dev);
if (err)
@@ -727,31 +966,22 @@ ltq_etop_remove(struct platform_device *
@@ -727,31 +967,22 @@ ltq_etop_remove(struct platform_device *
return 0;
}

@ -203,7 +203,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+early_param("ethaddr", setup_ethaddr);
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -779,7 +779,11 @@ ltq_etop_init(struct net_device *dev)
@@ -780,7 +780,11 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;

Loading…
Cancel
Save