Add 2.6.27 support to rb532, nand is not recognized, needs to be sorted out

SVN-Revision: 13224
v19.07.3_mercusys_ac12_duma
Florian Fainelli 16 years ago
parent ac679ab302
commit 901bda1b93

@ -0,0 +1,244 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_PIIX is not set
CONFIG_ATA_SFF=y
# CONFIG_ATM is not set
# CONFIG_AX25 is not set
CONFIG_BASE_SMALL=0
# CONFIG_BCM47XX is not set
CONFIG_BITREVERSE=y
CONFIG_BOOT_RAW=y
# CONFIG_BT is not set
CONFIG_CEVT_R4K=y
CONFIG_CLASSIC_RCU=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_LOONGSON2 is not set
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
CONFIG_CSRC_R4K=y
# CONFIG_DEBUG_FS is not set
CONFIG_DEVPORT=y
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_EXT2_FS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_SYSFS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_CLK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IDE=y
# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_KEXEC=y
CONFIG_KMOD=y
CONFIG_KORINA=y
# CONFIG_LEDS_ALIX is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_TX39XX is not set
# CONFIG_MACH_TX49XX is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MIKROTIK_RB532=y
CONFIG_MINI_FO=m
CONFIG_MIPS=y
# CONFIG_MIPS_COBALT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
# CONFIG_MIPS_MALTA is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MISDN is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CHAR=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_START=0x8000000
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_NATSEMI is not set
# CONFIG_NET_SCH_ESFQ_NFCT is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
# CONFIG_NO_IOPORT is not set
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_PAGE_SIZE_8KB is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_RB532=y
# CONFIG_PATA_SCH is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PROBE_INITRD_HEADER is not set
# CONFIG_R6040 is not set
CONFIG_RC32434_WDT=y
CONFIG_RFKILL_LEDS=y
CONFIG_RTC_LIB=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI=y
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SOUND is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
# CONFIG_TC35815 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_TICK_ONESHOT is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_VGASTATE is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIDEO_MEDIA=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_ZONE_DMA_FLAG=0

@ -0,0 +1,743 @@
diff -urN a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
--- a/arch/mips/rb532/devices.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/devices.c 2008-11-15 17:43:28.000000000 +0100
@@ -34,21 +34,11 @@
#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/integ.h>
#include <asm/mach-rc32434/gpio.h>
-
-#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
-#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)
-#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9)
-#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10)
+#include <asm/mach-rc32434/irq.h>
#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
-/* NAND definitions */
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
static struct resource korina_dev0_res[] = {
{
.name = "korina_regs",
@@ -94,15 +84,13 @@
};
static struct platform_device korina_dev0 = {
- .id = 0,
+ .id = -1,
.name = "korina",
.dev.platform_data = &korina_dev0_data,
.resource = korina_dev0_res,
.num_resources = ARRAY_SIZE(korina_dev0_res),
};
-#define CF_GPIO_NUM 13
-
static struct resource cf_slot0_res[] = {
{
.name = "cf_membase",
@@ -116,11 +104,11 @@
};
static struct cf_device cf_slot0_data = {
- .gpio_pin = 13
+ .gpio_pin = CF_GPIO_NUM
};
static struct platform_device cf_slot0 = {
- .id = 0,
+ .id = -1,
.name = "pata-rb532-cf",
.dev.platform_data = &cf_slot0_data,
.resource = cf_slot0_res,
@@ -130,7 +118,7 @@
/* Resources and device for NAND */
static int rb532_dev_ready(struct mtd_info *mtd)
{
- return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+ return gpio_get_value(GPIO_RDY);
}
static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -185,7 +173,7 @@
static struct platform_device rb532_led = {
.name = "rb532-led",
- .id = 0,
+ .id = -1,
};
static struct gpio_keys_button rb532_gpio_btn[] = {
@@ -292,7 +280,7 @@
{
/* Look for the CF card reader */
if (!readl(IDT434_REG_BASE + DEV1MASK))
- rb532_devs[1] = NULL;
+ rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */
else {
cf_slot0_res[0].start =
readl(IDT434_REG_BASE + DEV1BASE);
diff -urN a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
--- a/arch/mips/rb532/gpio.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/gpio.c 2008-11-15 17:43:28.000000000 +0100
@@ -27,28 +27,27 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/pci.h>
#include <linux/spinlock.h>
-#include <linux/io.h>
#include <linux/platform_device.h>
-
-#include <asm/addrspace.h>
+#include <linux/gpio.h>
#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/gpio.h>
-struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
-EXPORT_SYMBOL(rb532_gpio_reg0);
+struct rb532_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+};
struct mpmc_device dev3;
static struct resource rb532_gpio_reg0_res[] = {
{
.name = "gpio_reg0",
- .start = (u32)(IDT434_REG_BASE + GPIOBASE),
- .end = (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+ .start = REGBASE + GPIOBASE,
+ .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -56,8 +55,8 @@
static struct resource rb532_dev3_ctl_res[] = {
{
.name = "dev3_ctl",
- .start = (u32)(IDT434_REG_BASE + DEV3BASE),
- .end = (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+ .start = REGBASE + DEV3BASE,
+ .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -70,7 +69,7 @@
spin_lock_irqsave(&dev3.lock, flags);
- data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+ data = readl(IDT434_REG_BASE + reg_offs);
for (i = 0; i != len; ++i) {
if (val & (1 << i))
data |= (1 << (i + bit));
@@ -108,114 +107,166 @@
}
EXPORT_SYMBOL(get_latch_u5);
-int rb532_gpio_get_value(unsigned gpio)
+/* rb532_set_bit - sanely set a bit
+ *
+ * bitval: new value for the bit
+ * offset: bit index in the 4 byte address range
+ * ioaddr: 4 byte aligned address being altered
+ */
+static inline void rb532_set_bit(unsigned bitval,
+ unsigned offset, void __iomem *ioaddr)
{
- return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb532_gpio_get_value);
+ unsigned long flags;
+ u32 val;
-void rb532_gpio_set_value(unsigned gpio, int value)
-{
- unsigned tmp;
+ bitval = !!bitval; /* map parameter to {0,1} */
+
+ local_irq_save(flags);
- tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
+ val = readl(ioaddr);
+ val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */
+ val |= ( bitval << offset ); /* set bit if bitval == 1 */
+ writel(val, ioaddr);
- writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(rb532_gpio_set_value);
-int rb532_gpio_direction_input(unsigned gpio)
+/* rb532_get_bit - read a bit
+ *
+ * returns the boolean state of the bit, which may be > 1
+ */
+static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
{
- writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
- (void *)&rb532_gpio_reg0->gpiocfg);
-
- return 0;
+ return (readl(ioaddr) & (1 << offset));
}
-EXPORT_SYMBOL(rb532_gpio_direction_input);
-int rb532_gpio_direction_output(unsigned gpio, int value)
+/*
+ * Return GPIO level */
+static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- gpio_set_value(gpio, value);
- writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
- (void *)&rb532_gpio_reg0->gpiocfg);
+ struct rb532_gpio_chip *gpch;
- return 0;
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ return rb532_get_bit(offset, gpch->regbase + GPIOD);
}
-EXPORT_SYMBOL(rb532_gpio_direction_output);
-void rb532_gpio_set_int_level(unsigned gpio, int value)
+/*
+ * Set output GPIO level
+ */
+static void rb532_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- unsigned tmp;
+ struct rb532_gpio_chip *gpch;
- tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
}
-EXPORT_SYMBOL(rb532_gpio_set_int_level);
-int rb532_gpio_get_int_level(unsigned gpio)
+/*
+ * Set GPIO direction to input
+ */
+static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+ struct rb532_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+
+ if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
+ return 1; /* alternate function, GPIOCFG is ignored */
+
+ rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
+ return 0;
}
-EXPORT_SYMBOL(rb532_gpio_get_int_level);
-void rb532_gpio_set_int_status(unsigned gpio, int value)
+/*
+ * Set GPIO direction to output
+ */
+static int rb532_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- unsigned tmp;
+ struct rb532_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
- tmp = readl(&rb532_gpio_reg0->gpioistat);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+ if (rb532_get_bit(offset, gpch->regbase + GPIOFUNC))
+ return 1; /* alternate function, GPIOCFG is ignored */
+
+ /* set the initial output value */
+ rb532_set_bit(value, offset, gpch->regbase + GPIOD);
+
+ rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
+ return 0;
}
-EXPORT_SYMBOL(rb532_gpio_set_int_status);
-int rb532_gpio_get_int_status(unsigned gpio)
+static struct rb532_gpio_chip rb532_gpio_chip[] = {
+ [0] = {
+ .chip = {
+ .label = "gpio0",
+ .direction_input = rb532_gpio_direction_input,
+ .direction_output = rb532_gpio_direction_output,
+ .get = rb532_gpio_get,
+ .set = rb532_gpio_set,
+ .base = 0,
+ .ngpio = 32,
+ },
+ },
+};
+
+/*
+ * Set GPIO interrupt level
+ */
+void rb532_gpio_set_ilevel(int bit, unsigned gpio)
{
- return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
}
-EXPORT_SYMBOL(rb532_gpio_get_int_status);
+EXPORT_SYMBOL(rb532_gpio_set_ilevel);
-void rb532_gpio_set_func(unsigned gpio, int value)
+/*
+ * Set GPIO interrupt status
+ */
+void rb532_gpio_set_istat(int bit, unsigned gpio)
{
- unsigned tmp;
-
- tmp = readl(&rb532_gpio_reg0->gpiofunc);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
}
-EXPORT_SYMBOL(rb532_gpio_set_func);
+EXPORT_SYMBOL(rb532_gpio_set_istat);
-int rb532_gpio_get_func(unsigned gpio)
+/*
+ * Configure GPIO alternate function
+ */
+static void rb532_gpio_set_func(int bit, unsigned gpio)
{
- return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+ rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
}
-EXPORT_SYMBOL(rb532_gpio_get_func);
int __init rb532_gpio_init(void)
{
- rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
- rb532_gpio_reg0_res[0].end -
- rb532_gpio_reg0_res[0].start);
+ struct resource *r;
+
+ r = rb532_gpio_reg0_res;
+ rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
- if (!rb532_gpio_reg0) {
+ if (!rb532_gpio_chip->regbase) {
printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
return -ENXIO;
}
- dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
- rb532_dev3_ctl_res[0].end -
- rb532_dev3_ctl_res[0].start);
+ /* Register our GPIO chip */
+ gpiochip_add(&rb532_gpio_chip->chip);
+
+ r = rb532_dev3_ctl_res;
+ dev3.base = ioremap_nocache(r->start, r->end - r->start);
if (!dev3.base) {
printk(KERN_ERR "rb532: cannot remap device controller 3\n");
return -ENXIO;
}
+ /* configure CF_GPIO_NUM as CFRDY IRQ source */
+ rb532_gpio_set_func(0, CF_GPIO_NUM);
+ rb532_gpio_direction_input(&rb532_gpio_chip->chip, CF_GPIO_NUM);
+ rb532_gpio_set_ilevel(1, CF_GPIO_NUM);
+ rb532_gpio_set_istat(0, CF_GPIO_NUM);
+
return 0;
}
arch_initcall(rb532_gpio_init);
diff -urN a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
--- a/arch/mips/rb532/irq.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/irq.c 2008-11-15 17:43:28.000000000 +0100
@@ -45,7 +45,7 @@
#include <asm/mipsregs.h>
#include <asm/system.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/irq.h>
struct intr_group {
u32 mask; /* mask of valid bits in pending/mask registers */
diff -urN a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
--- a/arch/mips/rb532/prom.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/prom.c 2008-11-15 17:43:28.000000000 +0100
@@ -37,12 +37,8 @@
#include <asm/mach-rc32434/ddr.h>
#include <asm/mach-rc32434/prom.h>
-extern void __init setup_serial_port(void);
-
unsigned int idt_cpu_freq = 132000000;
EXPORT_SYMBOL(idt_cpu_freq);
-unsigned int gpio_bootup_state;
-EXPORT_SYMBOL(gpio_bootup_state);
static struct resource ddr_reg[] = {
{
@@ -108,9 +104,6 @@
mips_machtype = MACH_MIKROTIK_RB532;
}
- if (match_tag(prom_argv[i], GPIO_TAG))
- gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
-
strcpy(cp, prom_argv[i]);
cp += strlen(prom_argv[i]);
}
@@ -122,11 +115,6 @@
strcpy(cp, arcs_cmdline);
cp += strlen(arcs_cmdline);
}
- if (gpio_bootup_state & 0x02)
- strcpy(cp, GPIO_INIT_NOBUTTON);
- else
- strcpy(cp, GPIO_INIT_BUTTON);
-
cmd_line[CL_SIZE-1] = '\0';
strcpy(arcs_cmdline, cmd_line);
diff -urN a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
--- a/arch/mips/rb532/serial.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/serial.c 2008-11-15 17:43:28.000000000 +0100
@@ -31,16 +31,16 @@
#include <linux/serial_8250.h>
#include <asm/serial.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
extern unsigned int idt_cpu_freq;
static struct uart_port rb532_uart = {
.type = PORT_16550A,
.line = 0,
- .irq = RC32434_UART0_IRQ,
+ .irq = UART0_IRQ,
.iotype = UPIO_MEM,
- .membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
.regshift = 2
};
diff -urN a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
--- a/arch/mips/rb532/setup.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/setup.c 2008-11-15 17:43:28.000000000 +0100
@@ -9,7 +9,7 @@
#include <asm/time.h>
#include <linux/ioport.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/pci.h>
struct pci_reg __iomem *pci_reg;
@@ -27,7 +27,7 @@
static void rb_machine_restart(char *command)
{
/* just jump to the reset vector */
- writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+ writel(0x80000001, IDT434_REG_BASE + RST);
((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
}
diff -urN a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
--- a/arch/mips/rb532/time.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/rb532/time.c 2008-11-15 17:43:28.000000000 +0100
@@ -28,7 +28,6 @@
#include <linux/timex.h>
#include <asm/mipsregs.h>
-#include <asm/debug.h>
#include <asm/time.h>
#include <asm/mach-rc32434/rc32434.h>
diff -urN linux-2.6.27.5/arch/mips/Kconfig linux-2.6.27.5.new/arch/mips/Kconfig
--- linux-2.6.27.5/arch/mips/Kconfig 2008-11-07 18:55:34.000000000 +0100
+++ linux-2.6.27.5.new/arch/mips/Kconfig 2008-11-15 17:50:42.000000000 +0100
@@ -568,7 +568,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
select SWAP_IO_SPACE
select BOOT_RAW
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
diff -urN a/include/asm-mips/mach-rc32434/gpio.h b/include-mips/asm/mach-rc32434/gpio.h
--- a/include/asm-mips/mach-rc32434/gpio.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/gpio.h 2008-11-15 17:43:28.000000000 +0100
@@ -14,6 +14,16 @@
#define _RC32434_GPIO_H_
#include <linux/types.h>
+#include <asm-generic/gpio.h>
+
+#define NR_BUILTIN_GPIO 32
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio) (8 + 4 * 32 + gpio)
+#define irq_to_gpio(irq) (irq - (8 + 4 * 32))
struct rb532_gpio_reg {
u32 gpiofunc; /* GPIO Function Register
@@ -61,66 +71,20 @@
/* PCI messaging unit */
#define RC32434_PCI_MSU_GPIO (1 << 13)
+/* NAND GPIO signals */
+#define GPIO_RDY 8
+#define GPIO_WPX 9
+#define GPIO_ALE 10
+#define GPIO_CLE 11
+
+/* Compact Flash GPIO pin */
+#define CF_GPIO_NUM 13
extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
extern unsigned get_434_reg(unsigned reg_offs);
extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
extern unsigned char get_latch_u5(void);
-
-extern int rb532_gpio_get_value(unsigned gpio);
-extern void rb532_gpio_set_value(unsigned gpio, int value);
-extern int rb532_gpio_direction_input(unsigned gpio);
-extern int rb532_gpio_direction_output(unsigned gpio, int value);
-extern void rb532_gpio_set_int_level(unsigned gpio, int value);
-extern int rb532_gpio_get_int_level(unsigned gpio);
-extern void rb532_gpio_set_int_status(unsigned gpio, int value);
-extern int rb532_gpio_get_int_status(unsigned gpio);
-
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- /* Not yet implemented */
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- /* Not yet implemented */
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return rb532_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return rb532_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return rb532_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- rb532_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
-
-/* For cansleep */
-#include <asm-generic/gpio.h>
+extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
+extern void rb532_gpio_set_istat(int bit, unsigned gpio);
#endif /* _RC32434_GPIO_H_ */
diff -urN a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h
--- a/include/asm-mips/mach-rc32434/irq.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/irq.h 2008-11-15 17:43:28.000000000 +0100
@@ -4,5 +4,30 @@
#define NR_IRQS 256
#include <asm/mach-generic/irq.h>
+#include <asm/mach-rc32434/rb.h>
+
+/* Interrupt Controller */
+#define IC_GROUP0_PEND (REGBASE + 0x38000)
+#define IC_GROUP0_MASK (REGBASE + 0x38008)
+#define IC_GROUP_OFFSET 0x0C
+
+#define NUM_INTR_GROUPS 5
+
+/* 16550 UARTs */
+#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
+ /* GRP3 IRQ numbers start here */
+#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32)
+ /* GRP4 IRQ numbers start here */
+#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32)
+ /* GRP5 IRQ numbers start here */
+#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)
+#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
+
+#define UART0_IRQ (GROUP3_IRQ_BASE + 0)
+
+#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10)
#endif /* __ASM_RC32434_IRQ_H */
diff -urN a/include/asm-mips/mach-rc32434/prom.h b/include/asm-mips/mach-rc32434/prom.h
--- a/include/asm-mips/mach-rc32434/prom.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/prom.h 2008-11-15 17:43:28.000000000 +0100
@@ -28,14 +28,10 @@
#define PROM_ENTRY(x) (0xbfc00000 + ((x) * 8))
-#define GPIO_INIT_NOBUTTON ""
-#define GPIO_INIT_BUTTON " 2"
-
#define SR_NMI 0x00180000
#define SERIAL_SPEED_ENTRY 0x00000001
#define FREQ_TAG "HZ="
-#define GPIO_TAG "gpio="
#define KMAC_TAG "kmac="
#define MEM_TAG "mem="
#define BOARD_TAG "board="
diff -urN a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h
--- a/include/asm-mips/mach-rc32434/rb.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/rb.h 2008-11-15 17:43:28.000000000 +0100
@@ -17,7 +17,10 @@
#include <linux/genhd.h>
-#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
+#define REGBASE 0x18000000
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE))
+#define UART0BASE 0x58000
+#define RST (1 << 15)
#define DEV0BASE 0x010000
#define DEV0MASK 0x010004
#define DEV0C 0x010008
@@ -37,12 +40,14 @@
#define BTCS 0x010040
#define BTCOMPARE 0x010044
#define GPIOBASE 0x050000
-#define GPIOCFG 0x050004
-#define GPIOD 0x050008
-#define GPIOILEVEL 0x05000C
-#define GPIOISTAT 0x050010
-#define GPIONMIEN 0x050014
-#define IMASK6 0x038038
+/* Offsets relative to GPIOBASE */
+#define GPIOFUNC 0x00
+#define GPIOCFG 0x04
+#define GPIOD 0x08
+#define GPIOILEVEL 0x0C
+#define GPIOISTAT 0x10
+#define GPIONMIEN 0x14
+#define IMASK6 0x38
#define LO_WPX (1 << 0)
#define LO_ALE (1 << 1)
#define LO_CLE (1 << 2)
diff -urN a/include/asm-mips/mach-rc32434/rc32434.h b/include/asm-mips/mach-rc32434/rc32434.h
--- a/include/asm-mips/mach-rc32434/rc32434.h 2008-11-07 18:55:34.000000000 +0100
+++ b/include/asm-mips/mach-rc32434/rc32434.h 2008-11-15 17:43:28.000000000 +0100
@@ -8,37 +8,7 @@
#include <linux/delay.h>
#include <linux/io.h>
-#define RC32434_REG_BASE 0x18000000
-#define RC32434_RST (1 << 15)
-
#define IDT_CLOCK_MULT 2
-#define MIPS_CPU_TIMER_IRQ 7
-
-/* Interrupt Controller */
-#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000)
-#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008)
-#define IC_GROUP_OFFSET 0x0C
-
-#define NUM_INTR_GROUPS 5
-
-/* 16550 UARTs */
-#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
- /* GRP3 IRQ numbers start here */
-#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32)
- /* GRP4 IRQ numbers start here */
-#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32)
- /* GRP5 IRQ numbers start here */
-#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)
-#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
-
-
-#ifdef __MIPSEB__
-#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003)
-#else
-#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000)
-#endif
-
-#define RC32434_UART0_IRQ (GROUP3_IRQ_BASE + 0)
/* cpu pipeline flush */
static inline void rc32434_sync(void)
@@ -46,16 +16,4 @@
__asm__ volatile ("sync");
}
-static inline void rc32434_sync_udelay(int us)
-{
- __asm__ volatile ("sync");
- udelay(us);
-}
-
-static inline void rc32434_sync_delay(int ms)
-{
- __asm__ volatile ("sync");
- mdelay(ms);
-}
-
#endif /* _ASM_RC32434_RC32434_H_ */
--- a/arch/mips/pci/fixup-rc32434.c 2008-11-07 18:55:34.000000000 +0100
+++ b/arch/mips/pci/fixup-rc32434.c 2008-11-15 17:43:28.000000000 +0100
@@ -30,6 +30,7 @@
#include <linux/init.h>
#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/irq.h>
static int __devinitdata irq_map[2][12] = {
{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},

@ -0,0 +1,42 @@
The code is rather based on trial-and-error than knowledge. Verified Via
Rhine functionality in PIO as well as MMIO mode.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Tested-by: Florian Fainelli <florian@openwrt.org>
---
arch/mips/pci/pci-rc32434.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
index 1c2821e..71f7d27 100644
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -205,6 +205,8 @@ static int __init rc32434_pcibridge_init(void)
static int __init rc32434_pci_init(void)
{
+ void __iomem *io_map_base;
+
pr_info("PCI: Initializing PCI\n");
ioport_resource.start = rc32434_res_pci_io1.start;
@@ -212,6 +214,15 @@ static int __init rc32434_pci_init(void)
rc32434_pcibridge_init();
+ io_map_base = ioremap(rc32434_res_pci_io1.start,
+ rc32434_res_pci_io1.end - rc32434_res_pci_io1.start + 1);
+
+ if (!io_map_base)
+ return -ENOMEM;
+
+ rc32434_controller.io_map_base =
+ (unsigned long)io_map_base - rc32434_res_pci_io1.start;
+
register_pci_controller(&rc32434_controller);
rc32434_sync();
--
1.5.6.4

@ -0,0 +1,35 @@
The algorithm works unconditionally. If bitval is one, the first line is
a no op and the second line sets the bit at offset position. Vice versa,
if bitval is zero, the first line clears the bit at offset position and
the second line is a no op.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
arch/mips/rb532/gpio.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 0e84c8a..e35cb75 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -119,13 +119,11 @@ static inline void rb532_set_bit(unsigned bitval,
unsigned long flags;
u32 val;
- bitval = !!bitval; /* map parameter to {0,1} */
-
local_irq_save(flags);
val = readl(ioaddr);
- val &= ~( ~bitval << offset ); /* unset bit if bitval == 0 */
- val |= ( bitval << offset ); /* set bit if bitval == 1 */
+ val &= ~(!bitval << offset); /* unset bit if bitval == 0 */
+ val |= (!!bitval << offset); /* set bit if bitval == 1 */
writel(val, ioaddr);
local_irq_restore(flags);
--
1.5.6.4

@ -0,0 +1,84 @@
After applying the following changes I could verify functionality by
mounting a filesystem on the cfdisk and reading/writing files in it.
The set_irq_type() function must be wrong, as there is no set_type()
function defined for the rb532 IRQ chip. But as the used IRQ actually is
being triggered by a GPIO, setting it's interrupt level should be the
right alternative. Also to clear a GPIO triggered IRQ, the source has to
be cleared. This is being done at the end of rb532_pata_irq_handler.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
---
drivers/ata/pata_rb532_cf.c | 15 ++++++++++-----
1 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index f8b3ffc..7b11f40 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -31,6 +31,7 @@
#include <scsi/scsi_host.h>
#include <asm/gpio.h>
+#include <asm/mach-rc32434/gpio.h>
#define DRV_NAME "pata-rb532-cf"
#define DRV_VERSION "0.1.0"
@@ -39,7 +40,8 @@
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
-#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_BASE 0x0800
+#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
#define RB500_CF_REG_DATA 0x0C00
@@ -62,7 +64,7 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ rb532_gpio_set_ilevel(1, info->gpio_line);
}
static void rb532_pata_exec_command(struct ata_port *ap,
@@ -109,13 +111,15 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
struct rb532_cf_info *info = ah->private_data;
if (gpio_get_value(info->gpio_line)) {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
+ rb532_gpio_set_ilevel(0, info->gpio_line);
if (!info->frozen)
ata_sff_interrupt(info->irq, dev_instance);
} else {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ rb532_gpio_set_ilevel(1, info->gpio_line);
}
+ rb532_gpio_set_istat(0, info->gpio_line);
+
return IRQ_HANDLED;
}
@@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
--
1.5.6.4

@ -0,0 +1,68 @@
* rename the offset definition to avoid abiguity with the standard ATA
IO address
* read and write four bytes at once like the original driver does
* use writesl() and readsl() which implicitly iterate over the data
This patch assumes buflen to be a multiple of four, which is true for
ATA devices. ATAPI support is not known, though unlikely, as the
original driver always transfers 512 Bytes at once.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com>
---
drivers/ata/pata_rb532_cf.c | 20 +++++++++-----------
1 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index 7b11f40..b919012 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -43,7 +43,8 @@
#define RB500_CF_REG_BASE 0x0800
#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
-#define RB500_CF_REG_DATA 0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
@@ -74,19 +75,16 @@ static void rb532_pata_exec_command(struct ata_port *ap,
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static void rb532_pata_data_xfer(struct ata_device *adev,
+ unsigned char *buf, unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
- if (write_data) {
- for (; buflen > 0; buflen--, buf++)
- writeb(*buf, ioaddr);
- } else {
- for (; buflen > 0; buflen--, buf++)
- *buf = readb(ioaddr);
- }
+ if (write_data)
+ writesl(ioaddr, buf, buflen / sizeof(u32));
+ else
+ readsl(ioaddr, buf, buflen / sizeof(u32));
rb532_pata_finish_io(adev->link->ap);
}
@@ -156,7 +154,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
ata_sff_std_ports(&ap->ioaddr);
- ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
--
1.5.6.4

@ -0,0 +1,35 @@
Per definition, this function should return the number of bytes
consumed. Also take care of the unlikely case when buflen is not a
multiple of four; while transferring, the division cuts the remaining
bytes, so alter the return value accordingly.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/ata/pata_rb532_cf.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index b919012..95a0d66 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -75,7 +75,7 @@ static void rb532_pata_exec_command(struct ata_port *ap,
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev,
unsigned char *buf, unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
@@ -87,6 +87,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev,
readsl(ioaddr, buf, buflen / sizeof(u32));
rb532_pata_finish_io(adev->link->ap);
+ return buflen - (buflen % sizeof(u32));
}
static void rb532_pata_freeze(struct ata_port *ap)
--
1.5.6.4

@ -0,0 +1,15 @@
diff -urN linux-2.6.27.5/arch/mips/kernel/head.S linux-2.6.27.5.new/arch/mips/kernel/head.S
--- linux-2.6.27.5/arch/mips/kernel/head.S 2008-11-15 19:24:03.000000000 +0100
+++ linux-2.6.27.5.new/arch/mips/kernel/head.S 2008-11-15 19:24:55.000000000 +0100
@@ -123,6 +123,11 @@
j kernel_entry
nop
+
+
+EXPORT(_image_cmdline)
+ .ascii "CMDLINE:"
+
#ifndef CONFIG_NO_EXCEPT_FILL
/*
* Reserved space for exception handlers.

@ -0,0 +1,245 @@
--- linux-2.6.27.5/drivers/net/korina.c 2008-11-07 18:55:34.000000000 +0100
+++ ../build_dir/linux-rb532/linux-2.6.27.5/drivers/net/korina.c 2008-11-16 00:38:19.000000000 +0100
@@ -327,12 +327,11 @@
dmas = readl(&lp->rx_dma_regs->dmas);
if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
- netif_rx_schedule_prep(dev, &lp->napi);
-
dmasm = readl(&lp->rx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_DONE |
DMA_STAT_HALT | DMA_STAT_ERR),
&lp->rx_dma_regs->dmasm);
+ netif_rx_schedule(dev, &lp->napi);
if (dmas & DMA_STAT_ERR)
printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
@@ -350,14 +349,24 @@
struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
struct sk_buff *skb, *skb_new;
u8 *pkt_buf;
- u32 devcs, pkt_len, dmas, rx_free_desc;
+ u32 devcs, pkt_len, dmas, pktuncrc_len;
int count;
dma_cache_inv((u32)rd, sizeof(*rd));
for (count = 0; count < limit; count++) {
-
+ skb_new = NULL;
devcs = rd->devcs;
+ pkt_len = RCVPKT_LENGTH(devcs);
+ skb = lp->rx_skb[lp->rx_next_done];
+
+ if ((devcs & ETH_RX_LD) != ETH_RX_LD) {
+ /* check that this is a whole packet
+ * WARNING: DMA_FD bit incorrectly set
+ * in Rc32434 (errata ref #077) */
+ dev->stats.rx_errors++;
+ dev->stats.rx_dropped++;
+ }
/* Update statistics counters */
if (devcs & ETH_RX_CRC)
@@ -375,75 +384,79 @@
if (devcs & ETH_RX_MP)
dev->stats.multicast++;
- if ((devcs & ETH_RX_LD) != ETH_RX_LD) {
- /* check that this is a whole packet
- * WARNING: DMA_FD bit incorrectly set
- * in Rc32434 (errata ref #077) */
- dev->stats.rx_errors++;
- dev->stats.rx_dropped++;
- }
-
- while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
- /* init the var. used for the later
- * operations within the while loop */
- skb_new = NULL;
- pkt_len = RCVPKT_LENGTH(devcs);
- skb = lp->rx_skb[lp->rx_next_done];
-
- if ((devcs & ETH_RX_ROK)) {
- /* must be the (first and) last
- * descriptor then */
- pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+ else if ((devcs & ETH_RX_ROK)) {
+ /* must be the (first and) last
+ * descriptor then */
+ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+ pktuncrc_len = pkt_len - 4;
- /* invalidate the cache */
- dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+ /* invalidate the cache */
+ dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len);
- /* Malloc up new buffer. */
- skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+ /* Malloc up new buffer. */
+ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
- if (!skb_new)
- break;
+ if (skb_new) {
/* Do not count the CRC */
- skb_put(skb, pkt_len - 4);
+ skb_put(skb, pktuncrc_len);
skb->protocol = eth_type_trans(skb, dev);
/* Pass the packet to upper layers */
netif_receive_skb(skb);
+
dev->last_rx = jiffies;
dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
-
- /* Update the mcast stats */
- if (devcs & ETH_RX_MP)
- dev->stats.multicast++;
-
+ dev->stats.rx_bytes += pktuncrc_len;
+
lp->rx_skb[lp->rx_next_done] = skb_new;
+ } else {
+ dev->stats.rx_errors++;
+ dev->stats.rx_dropped++;
}
+ } else {
+ dev->stats.rx_errors++;
+ dev->stats.rx_dropped++;
+
+ /* Update statistics counters */
+ if (devcs & ETH_RX_CRC)
+ dev->stats.rx_crc_errors++;
+ else if (devcs & ETH_RX_LOR)
+ dev->stats.rx_length_errors++;
+ else if (devcs & ETH_RX_LE)
+ dev->stats.rx_length_errors++;
+ else if (devcs & ETH_RX_OVR)
+ dev->stats.rx_over_errors++;
+ else if (devcs & ETH_RX_CV)
+ dev->stats.rx_frame_errors++;
+ else if (devcs & ETH_RX_CES)
+ dev->stats.rx_length_errors++;
+ else if (devcs & ETH_RX_MP)
+ dev->stats.multicast++;
+ }
- rd->devcs = 0;
+ rd->devcs = 0;
- /* Restore descriptor's curr_addr */
- if (skb_new)
- rd->ca = CPHYSADDR(skb_new->data);
- else
- rd->ca = CPHYSADDR(skb->data);
+ /* Restore descriptor's curr_addr */
+ if (skb_new)
+ rd->ca = CPHYSADDR(skb_new->data);
+ else
+ rd->ca = CPHYSADDR(skb->data);
- rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ rd->control = DMA_COUNT(KORINA_RBSIZE) |
DMA_DESC_COD | DMA_DESC_IOD;
- lp->rd_ring[(lp->rx_next_done - 1) &
- KORINA_RDS_MASK].control &=
- ~DMA_DESC_COD;
-
- lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
- dma_cache_wback((u32)rd, sizeof(*rd));
- rd = &lp->rd_ring[lp->rx_next_done];
- writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
- }
+ lp->rd_ring[(lp->rx_next_done - 1) &
+ KORINA_RDS_MASK].control &= ~DMA_DESC_COD;
+
+ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+ dma_cache_wback((u32)rd, sizeof(*rd));
+ rd = &lp->rd_ring[lp->rx_next_done];
+ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
}
dmas = readl(&lp->rx_dma_regs->dmas);
if (dmas & DMA_STAT_HALT) {
+ /* Mask off halt and errors bits */
writel(~(DMA_STAT_HALT | DMA_STAT_ERR),
&lp->rx_dma_regs->dmas);
@@ -469,8 +482,9 @@
if (work_done < budget) {
netif_rx_complete(dev, napi);
+ /* Mask off interrupts */
writel(readl(&lp->rx_dma_regs->dmasm) &
- ~(DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
+ (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR),
&lp->rx_dma_regs->dmasm);
}
return work_done;
@@ -534,10 +548,11 @@
{
struct korina_private *lp = netdev_priv(dev);
struct dma_desc *td = &lp->td_ring[lp->tx_next_done];
+ unsigned long flags;
u32 devcs;
u32 dmas;
- spin_lock(&lp->lock);
+ spin_lock_irqsave(&lp->lock, flags);
/* Process all desc that are done */
while (IS_DMA_FINISHED(td->control)) {
@@ -610,7 +625,7 @@
~(DMA_STAT_FINI | DMA_STAT_ERR),
&lp->tx_dma_regs->dmasm);
- spin_unlock(&lp->lock);
+ spin_unlock_irqrestore(&lp->lock, flags);
}
static irqreturn_t
@@ -624,11 +639,10 @@
dmas = readl(&lp->tx_dma_regs->dmas);
if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
- korina_tx(dev);
-
dmasm = readl(&lp->tx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
&lp->tx_dma_regs->dmasm);
+ korina_tx(dev);
if (lp->tx_chain_status == desc_filled &&
(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
@@ -1078,11 +1092,18 @@
static int korina_probe(struct platform_device *pdev)
{
- struct korina_device *bif = platform_get_drvdata(pdev);
+ struct korina_device *bif;
struct korina_private *lp;
struct net_device *dev;
struct resource *r;
int rc;
+ DECLARE_MAC_BUF(mac);
+
+ bif = (struct korina_device *)pdev->dev.platform_data;
+ if (!bif) {
+ printk(KERN_ERR DRV_NAME ": missing platform_data\n");
+ return -ENODEV;
+ }
dev = alloc_etherdev(sizeof(struct korina_private));
if (!dev) {
@@ -1172,6 +1193,7 @@
": cannot register net device %d\n", rc);
goto probe_err_register;
}
+ printk(KERN_INFO DRV_NAME ": registered %s, IRQ %d MAC %s\n", dev->name, dev->irq, print_mac(mac, dev->dev_addr));
out:
return rc;

@ -0,0 +1,12 @@
diff -urN linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c
--- linux-2.6.27.5/drivers/watchdog/rc32434_wdt.c 2008-11-07 18:55:34.000000000 +0100
+++ linux-2.6.27.5.new/drivers/watchdog/rc32434_wdt.c 2008-11-15 22:06:28.000000000 +0100
@@ -261,7 +261,7 @@
int ret;
struct resource *r;
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
if (!r) {
printk(KERN_ERR KBUILD_MODNAME
"failed to retrieve resources\n");
Loading…
Cancel
Save