diff --git a/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts b/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts
new file mode 100644
index 0000000000..28b19f92ef
--- /dev/null
+++ b/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9556_avm_fritz-repeater.dtsi"
+
+/ {
+	compatible = "avm,fritzdvbc", "qca,qca9556";
+	model = "AVM FRITZ!WLAN Repeater DVB-C";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	led_spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		mosi-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		num-chipselects = <0>;
+
+		spi_gpio: led_gpio@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			registers-number = <2>;
+			spi-max-frequency = <10000000>;
+
+			gpio_latch_bit {
+				gpio-hog;
+				gpios = <16 GPIO_ACTIVE_HIGH>;
+				output-high;
+				line-name = "gpio-latch-bit";
+			};
+		};
+	};
+
+	/*
+	 * GPIO pins 100 or greater in the vendor GPL dump are redirected
+	 * to the shift register.
+	 * So OEM source pin 100 becomes 0 on the SR and so forth.
+	 */
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "fritzdvbc:green:power";
+			gpios = <&spi_gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "fritzdvbc:green:wlan";
+			gpios = <&spi_gpio 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		tv {
+			label = "fritzdvbc:green:tv";
+			gpios = <&spi_gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		rssihigh {
+			label = "fritzdvbc:green:rssihigh";
+			gpios = <&spi_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		rssimediumhigh {
+			label = "fritzdvbc:green:rssimediumhigh";
+			gpios = <&spi_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		rssimedium {
+			label = "fritzdvbc:green:rssimedium";
+			gpios = <&spi_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		rssimediumlow {
+			label = "fritzdvbc:green:rssimediumlow";
+			gpios = <&spi_gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rssilow {
+			label = "fritzdvbc:green:rssilow";
+			gpios = <&spi_gpio 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&gpio {
+	reset-pcie-ep {
+		gpio-hog;
+		gpios = <109 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE EP reset";
+	};
+
+	reset-pcie-bus {
+		gpio-hog;
+		gpios = <110 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCIE Bus reset";
+	};
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index be0c3b1217..398c9ed495 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -38,6 +38,14 @@ avm,fritz4020)
 	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
 	ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x1E"
 	;;
+avm,fritzdvbc)
+	ucidef_set_rssimon "wlan1" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssilow" "wlan1" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssimediumlow" "wlan1" "20" "100"
+	ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssimedium" "wlan1" "40" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan1" "60" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan1" "80" "100"
+	;;
 comfast,cf-e110n-v2)
 	ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
 	ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x02"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 02245031fa..4b74565aa3 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -15,6 +15,7 @@ ath79_setup_interfaces()
 	aruba,ap-105|\
 	avm,fritz1750e|\
 	avm,fritz300e|\
+	avm,fritzdvbc|\
 	comfast,cf-wr752ac-v1|\
 	comfast,cf-e130n-v2|\
 	devolo,dvl1200i|\
@@ -352,7 +353,8 @@ ath79_setup_macs()
 		label_mac=$(mtd_get_mac_binary art 0x1002)
 		;;
 	avm,fritz1750e|\
-	avm,fritz450e)
+	avm,fritz450e|\
+	avm,fritzdvbc)
 		label_mac=$(fritz_tffs -n macwlan -i $(find_mtd_part "tffs (1)"))
 		;;
 	avm,fritz300e)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 56d083b4bf..3db4d2a994 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -11,7 +11,8 @@ case "$FIRMWARE" in
 	case $board in
 	avm,fritz1750e|\
 	avm,fritz4020|\
-	avm,fritz450e)
+	avm,fritz450e|\
+	avm,fritzdvbc)
 		caldata_extract_reverse "urlader" 0x1541 0x440
 		;;
 	dlink,dap-2695-a1)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 603557d6c2..9d4306e66b 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -10,7 +10,8 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
 	case $board in
-	avm,fritz1750e)
+	avm,fritz1750e|\
+	avm,fritzdvbc)
 		caldata_extract "urlader" 0x198a 0x844
 		;;
 	comfast,cf-wr650ac-v1|\
diff --git a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
index 61577a376b..c5d9cd536f 100644
--- a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
+++ b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
@@ -3,7 +3,8 @@
 preinit_set_mac_address() {
 	case $(board_name) in
 	avm,fritz1750e|\
-	avm,fritz450e)
+	avm,fritz450e|\
+	avm,fritzdvbc)
 		ip link set dev eth0 address $(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
 		;;
 	dlink,dap-2695-a1)
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index e92dbc99d6..9f296adaa7 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -223,6 +223,16 @@ define Device/avm_fritz450e
 endef
 TARGET_DEVICES += avm_fritz450e
 
+define Device/avm_fritzdvbc
+  $(Device/avm)
+  SOC := qca9556
+  IMAGE_SIZE := 15232k
+  DEVICE_MODEL := FRITZ!WLAN Repeater DVB-C
+  DEVICE_PACKAGES += rssileds kmod-ath10k-ct-smallbuffers \
+	ath10k-firmware-qca988x-ct -swconfig
+endef
+TARGET_DEVICES += avm_fritzdvbc
+
 define Device/buffalo_bhr-4grv
   SOC := ar7242
   DEVICE_VENDOR := Buffalo