dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware

Browse Source 
this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40418
v19.07.3_mercusys_ac12_duma
John Crispin 10 years ago
parent 1978620045
commit 858b972e66
5 changed files with 186 additions and 161 deletions
Show Stats Download Patch File Download Diff File

162
target/linux/lantiq/dts/VG3503J.dts
Unescape Escape View File

@ -1,171 +1,11 @@
/dts-v1/;
/include/ "vr9.dtsi"
/include/ "VG3503J.dtsi"
/ {
model = "VG3503J - BT OpenReach VDSL Modem";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
ranges = <0 0 0x0 0x3ffffff>;
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x20000>;
};
partition@20000 {
label = "kernel";
reg = <0x20000 0x180000>;
};
partition@1a0000 {
label = "rootfs";
reg = <0x1a0000 0x5a0000>;
};
partition@740000 {
label = "btagent";
reg = <0x740000 0x80000>;
};
partition@7c0000 {
label = "pri_bfocus_cfg";
reg = <0x7c0000 0x10000>;
};
partition@7d0000 {
label = "sec_bfocus_cfg";
reg = <0x7d0000 0x10000>;
};
partition@7e0000 {
label = "sysconfig";
reg = <0x7e0000 0x10000>;
};
partition@7f0000 {
label = "misc_cfg";
reg = <0x7f0000 0x10000>;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy0 led2", "gphy1 led0",
"gphy1 led1", "gphy1 led2";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
};
};
eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy22f_a1x.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power2 {
label = "power2";
gpios = <&gpio 14 1>;
};
dsl {
label = "bt:green:dsl";
gpios = <&gpio 19 1>;
};
power {
label = "power";
gpios = <&gpio 28 1>;
};
};
};

163
target/linux/lantiq/dts/VG3503J.dtsi
Unescape Escape View File

@ -0,0 +1,163 @@
/include/ "vr9.dtsi"
/ {
model = "VG3503J - BT OpenReach VDSL Modem";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
ranges = <0 0 0x0 0x3ffffff>;
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x20000>;
};
partition@20000 {
label = "kernel";
reg = <0x20000 0x180000>;
};
partition@1a0000 {
label = "rootfs";
reg = <0x1a0000 0x5a0000>;
};
partition@740000 {
label = "btagent";
reg = <0x740000 0x80000>;
};
partition@7c0000 {
label = "pri_bfocus_cfg";
reg = <0x7c0000 0x10000>;
};
partition@7d0000 {
label = "sec_bfocus_cfg";
reg = <0x7d0000 0x10000>;
};
partition@7e0000 {
label = "sysconfig";
reg = <0x7e0000 0x10000>;
};
partition@7f0000 {
label = "misc_cfg";
reg = <0x7f0000 0x10000>;
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy0 led2", "gphy1 led0",
"gphy1 led1", "gphy1 led2";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
};
};
eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <73 72>;
interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "mii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "mii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 6 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power2 {
label = "power2";
gpios = <&gpio 14 1>;
};
dsl {
label = "bt:green:dsl";
gpios = <&gpio 19 1>;
};
power {
label = "power";
gpios = <&gpio 28 1>;
};
};
};

11
target/linux/lantiq/dts/VG3503J_V2.dts
Unescape Escape View File

@ -0,0 +1,11 @@
/dts-v1/;
/include/ "VG3503J.dtsi"
/ {
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy22f_a2x.bin";
phys = [ 00 01 ];
};
};

3
target/linux/lantiq/image/Makefile
Unescape Escape View File

@ -367,6 +367,9 @@ Image/Build/Profile/FRITZ3370=$(call Image/BuildEVA/$(1),$(1),FRITZ3370)
Image/BuildKernel/Profile/VG3503J=$(call Image/BuildKernelLoader/Template,VG3503J)
Image/Build/Profile/VG3503J=$(call Image/BuildLoader/$(1),$(1),VG3503J)
Image/BuildKernel/Profile/VG3503J_V2=$(call Image/BuildKernelLoader/Template,VG3503J_V2)
Image/Build/Profile/VG3503J_V2=$(call Image/BuildLoader/$(1),$(1),VG3503J_V2)
Image/BuildKernel/Profile/TDW8970=$(call Image/BuildKernelTPLink/Template,TDW8970,TD-W8970v1,$(1))
Image/Build/Profile/TDW8970=$(call Image/BuildTPLink/$(1),$(1),TDW8970,TD-W8970v1)

8
target/linux/lantiq/xrx200/profiles/arv.mk
Unescape Escape View File

@ -6,6 +6,14 @@ endef
$(eval $(call Profile,VG3503J))
define Profile/VG3503J_V2
NAME:=BT Openreach - ECI VDSL Modem v2
PACKAGES:=kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
kmod-ltq-ptm-vr9 ltq-vdsl-app
endef
$(eval $(call Profile,VG3503J_V2))
define Profile/VGV7519NOR
NAME:=Experiabox 8 VGV7519
PACKAGES:=kmod-ath9k wpad-mini \

Write Preview
Loading…
Cancel
Save