ramips: add support for JS76x8 series DEV boards

This commit adds support for the Jotale JS76x8 series development boards.
These devices have the following specifications:

- SOC: MT7628AN/NN, MT7688AN, MT7628DAN
- RAM of MT7628AN/NN and MT7688AN: 64/128/256 MB (DDR2)
- RAM of MT7628DAN: 64 MB (DDR2)
- FLASH:8/16/32 MB (SPI NOR)
- Ethernet:3x 10/100 Mbps ethernet ports (MT76x8 built-in switch)
- WIFI:1x 2T2R 2.4 GHz Wi-Fi
- LEDs:1x system status green LED, 1x wifi green LED,
       3x ethernet green LED
- Buttons:1x reset button
- 1x microSD slot
- 4x USB 2.0 port
- 1x mini-usb debug UART
- 1x DC jack for main power (DC 5V)
- 1x TTL/RS232 UART
- 1x TTL/RS485 UART
- 13x GPIO header
- 1x audio codec(wm8960)

Installation via OpenWrt:

The original firmware is OpenWrt, so both LuCI and sysupgrade can be used.

Installation via U-boot web:

1. Power on board with reset button pressed, release it
   after wifi led start blinking.
2. Setup static IP 192.168.1.123/4 on your PC.
3. Go to 192.168.1.8 in browser and upload "sysupgrade" image.

Installation via U-boot tftp:
1. Connect to serial console at the mini usb, which has been connected to UART0
   on board (115200 8N1)
2. Setup static IP 192.168.1.123/4 on your PC.
3. Place openwrt-firmware.bin on your PC tftp server (192.168.1.123).
3. Connect one of LAN ports on board to your PC.
4. Start terminal software (e.g. screen /dev/ttyUSB0 115200) on PC.
5. Apply power to board.
6. Interrupt U-boot with keypress of "2".
7. At u-boot prompts:
   Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) Y
   Input device IP (192.168.1.8) ==:192.168.1.8
   Input server IP (192.168.1.123) ==:192.168.1.123
   Input Linux Kernel filename (root_uImage) ==:openwrt-firmware.bin
8. board will download file from tftp server, write it to flash and reboot.

Signed-off-by: Robinson Wu <wurobinson@qq.com>
[add license to DTS files, fix state_default and reduce to the mimimum,
move phy0tpt trigger to DTS, drop ucidef_set_led_timer, fix network ports]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
master
Robinson Wu 4 years ago committed by Adrian Schmutzler
parent ced167d729
commit 84cb0f7ace

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7628an_jotale_js76x8.dtsi"
/ {
compatible = "jotale,js76x8-16m", "jotale,js76x8", "mediatek,mt7628an-soc";
model = "Jotale JS76x8 (16M)";
};
&firmware {
reg = <0x50000 0xfb0000>;
};

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7628an_jotale_js76x8.dtsi"
/ {
compatible = "jotale,js76x8-32m", "jotale,js76x8", "mediatek,mt7628an-soc";
model = "Jotale JS76x8 (32M)";
};
&firmware {
reg = <0x50000 0x1fb0000>;
};

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7628an_jotale_js76x8.dtsi"
/ {
compatible = "jotale,js76x8-8m", "mediatek,mt7628an-soc";
model = "Jotale JS76x8 (8M)";
};
&firmware {
reg = <0x50000 0x7b0000>;
};

@ -0,0 +1,126 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "jotale,js76x8", "mediatek,mt7628an-soc";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "js76x8:green:system";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
};
wifi {
label = "js76x8:green:wifi";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
};
&state_default {
gpio {
groups = "refclk", "wdt", "wled_an";
function = "gpio";
};
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
/* reg property is set based on flash size in DTS files */
};
};
};
};
&i2c {
status = "okay";
};
&i2s {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&sdhci {
status = "okay";
mediatek,cd-low;
};
&wmac {
status = "okay";
};

@ -160,6 +160,33 @@ define Device/iptime_a604m
endef endef
TARGET_DEVICES += iptime_a604m TARGET_DEVICES += iptime_a604m
define Device/jotale_js76x8
DEVICE_VENDOR := Jotale
DEVICE_MODEL := JS76x8
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
define Device/jotale_js76x8-8m
$(Device/jotale_js76x8)
IMAGE_SIZE := 7872k
DEVICE_VARIANT := 8M
endef
TARGET_DEVICES += jotale_js76x8-8m
define Device/jotale_js76x8-16m
$(Device/jotale_js76x8)
IMAGE_SIZE := 16064k
DEVICE_VARIANT := 16M
endef
TARGET_DEVICES += jotale_js76x8-16m
define Device/jotale_js76x8-32m
$(Device/jotale_js76x8)
IMAGE_SIZE := 32448k
DEVICE_VARIANT := 32M
endef
TARGET_DEVICES += jotale_js76x8-32m
define Device/mediatek_linkit-smart-7688 define Device/mediatek_linkit-smart-7688
IMAGE_SIZE := 32448k IMAGE_SIZE := 32448k
DEVICE_VENDOR := MediaTek DEVICE_VENDOR := MediaTek

@ -92,6 +92,12 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;; ;;
jotale,js76x8-8m|\
jotale,js76x8-16m|\
jotale,js76x8-32m)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "6@eth0"
;;
netgear,r6020|\ netgear,r6020|\
netgear,r6080|\ netgear,r6080|\
netgear,r6120) netgear,r6120)
@ -174,6 +180,13 @@ ramips_setup_macs()
totolink,a3) totolink,a3)
wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
;; ;;
jotale,js76x8-8m|\
jotale,js76x8-16m|\
jotale,js76x8-32m|\
skylab,skw92a|\
totolink,lr1200)
wan_mac=$(mtd_get_mac_binary factory 0x2e)
;;
mediatek,linkit-smart-7688|\ mediatek,linkit-smart-7688|\
onion,omega2|\ onion,omega2|\
onion,omega2p) onion,omega2p)
@ -189,10 +202,6 @@ ramips_setup_macs()
wiznet,wizfi630s) wiznet,wizfi630s)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
;; ;;
skylab,skw92a|\
totolink,lr1200)
wan_mac=$(mtd_get_mac_binary factory 0x2e)
;;
tplink,archer-c20-v4|\ tplink,archer-c20-v4|\
tplink,archer-c50-v3|\ tplink,archer-c50-v3|\
tplink,tl-mr3420-v5|\ tplink,tl-mr3420-v5|\

Loading…
Cancel
Save