From 81f7bdcb8d6284dbc291b7300c536359c8a528bd Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Tue, 11 Sep 2018 20:50:35 +0900 Subject: [PATCH] ath79: add support for Buffalo BHR-4GRV Buffalo BHR-4GRV is a wired router, based on Atheros AR7242. Specification: - Atheros AR7242 - 64 MB of RAM - 32 MB of Flash - 2x 16 MB SPI-NOR flash - 5x 10/100/1000 Mbps Ethernet - 3x LEDs, 2x keys - 1x USB 2.0 Type-A - UART header on PCB - JP1: Vcc, GND, TX, RX from reset button side Flash instruction using factory image: 1. Boot the BHR-4GRV normaly and connect the computer to its LAN port 2. Access to "http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html" with user "bufpy" and password "otdpopy" 3. Select the OpenWrt factory image and click "OK" button to perform firmware upgrade 4. Wait ~200 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi --- .../linux/ath79/base-files/etc/board.d/02_network | 11 ++++++----- target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts | 13 +++++++++++++ target/linux/ath79/image/generic.mk | 13 +++++++++++++ 3 files changed, 32 insertions(+), 5 deletions(-) create mode 100644 target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 54fbe7b350..e608825fb8 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -27,11 +27,7 @@ ath79_setup_interfaces() wd,mynet-wifi-rangeextender) ucidef_set_interface_lan "eth0" ;; - buffalo,wzr-hp-ag300h) - ucidef_set_interface_wan "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; + buffalo,bhr-4grv|\ buffalo,wzr-hp-g450h) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" @@ -40,6 +36,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0" ;; + buffalo,wzr-hp-ag300h) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" + ;; dlink,dir-825-b1) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ diff --git a/target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts b/target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts new file mode 100644 index 0000000000..7ce9f6497f --- /dev/null +++ b/target/linux/ath79/dts/ar7242_buffalo_bhr-4grv.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar7242_buffalo_wzr-bhr.dtsi" + +/ { + compatible = "buffalo,bhr-4grv", "qca,ar7242"; + model = "Buffalo BHR-4GRV"; +}; + +&sec_vpn { + label = "buffalo:orange:vpn"; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 91325cf4d4..39f59524d9 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -69,6 +69,19 @@ define Device/avm_fritz4020 endef TARGET_DEVICES += avm_fritz4020 +define Device/buffalo_bhr-4grv + ATH_SOC := ar7242 + DEVICE_TITLE := Buffalo BHR-4GRV + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport + IMAGE_SIZE := 32256k + IMAGES += factory.bin tftp.bin + IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | buffalo-tag BHR-4GRV + IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header + SUPPORTED_DEVICES += wzr-hp-g450h +endef +TARGET_DEVICES += buffalo_bhr-4grv + define Device/buffalo_wzr-hp-ag300h ATH_SOC := ar7161 DEVICE_TITLE := Buffalo WZR-HP-AG300H