ar71xx: add qihoo 360 c301 router support
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac. Its chipset is AR9344 + AR9882 with two 16MB flashes. This patch adds its initial support. v2: * use mtd_get_mac_ascii to fetch MAC address for ath10k. * use ath79_register_pci to initialize AR9882. Signed-off-by: Weijie Gao <hackpascal@gmail.com> SVN-Revision: 42552v19.07.3_mercusys_ac12_duma
parent
b520e9b8d4
commit
7dbbdfb61f
@ -0,0 +1,166 @@
|
||||
/*
|
||||
* Qihoo 360 C301 board support
|
||||
*
|
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2014 Weijie Gao <hackpascal@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "nvram.h"
|
||||
|
||||
#define QIHOO_C301_GPIO_LED_STATUS_GREEN 0
|
||||
#define QIHOO_C301_GPIO_LED_STATUS_RED 11
|
||||
|
||||
#define QIHOO_C301_GPIO_LED_WAN 1
|
||||
#define QIHOO_C301_GPIO_LED_LAN1 2
|
||||
#define QIHOO_C301_GPIO_LED_LAN2 3
|
||||
#define QIHOO_C301_GPIO_ETH_LEN_EN 18
|
||||
|
||||
#define QIHOO_C301_GPIO_BTN_RESET 16
|
||||
|
||||
#define QIHOO_C301_GPIO_USB_POWER 19
|
||||
|
||||
#define QIHOO_C301_GPIO_SPI_CS1 12
|
||||
|
||||
#define QIHOO_C301_GPIO_EXTERNAL_LNA0 14
|
||||
#define QIHOO_C301_GPIO_EXTERNAL_LNA1 15
|
||||
|
||||
#define QIHOO_C301_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define QIHOO_C301_KEYS_DEBOUNCE_INTERVAL \
|
||||
(3 * QIHOO_C301_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define QIHOO_C301_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
#define QIHOO_C301_NVRAM_ADDR 0x1f058010
|
||||
#define QIHOO_C301_NVRAM_SIZE 0x7ff0
|
||||
|
||||
static struct gpio_led qihoo_c301_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "qihoo:green:status",
|
||||
.gpio = QIHOO_C301_GPIO_LED_STATUS_GREEN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "qihoo:red:status",
|
||||
.gpio = QIHOO_C301_GPIO_LED_STATUS_RED,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button qihoo_c301_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = QIHOO_C301_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = QIHOO_C301_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
struct flash_platform_data flash __initdata = {NULL, NULL, 0};
|
||||
|
||||
static void qihoo_c301_get_mac(const char *name, char *mac)
|
||||
{
|
||||
u8 *nvram = (u8 *) KSEG1ADDR(QIHOO_C301_NVRAM_ADDR);
|
||||
int err;
|
||||
|
||||
err = ath79_nvram_parse_mac_addr(nvram, QIHOO_C301_NVRAM_SIZE,
|
||||
name, mac);
|
||||
if (err)
|
||||
pr_err("no MAC address found for %s\n", name);
|
||||
}
|
||||
|
||||
static void __init qihoo_c301_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
|
||||
ath79_register_m25p80_multi(&flash);
|
||||
|
||||
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
|
||||
|
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_WAN,
|
||||
AR934X_GPIO_OUT_LED_LINK4);
|
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN1,
|
||||
AR934X_GPIO_OUT_LED_LINK1);
|
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN2,
|
||||
AR934X_GPIO_OUT_LED_LINK2);
|
||||
|
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_SPI_CS1,
|
||||
AR934X_GPIO_OUT_SPI_CS1);
|
||||
|
||||
gpio_request_one(QIHOO_C301_GPIO_ETH_LEN_EN,
|
||||
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
|
||||
"Ethernet LED enable");
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(qihoo_c301_leds_gpio),
|
||||
qihoo_c301_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, QIHOO_C301_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(qihoo_c301_gpio_keys),
|
||||
qihoo_c301_gpio_keys);
|
||||
|
||||
ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0);
|
||||
ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1);
|
||||
|
||||
qihoo_c301_get_mac("wlan24mac=", tmpmac);
|
||||
ath79_register_wmac(art + QIHOO_C301_WMAC_CALDATA_OFFSET, tmpmac);
|
||||
|
||||
ath79_register_pci();
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
|
||||
AR934X_ETH_CFG_SW_PHY_SWAP);
|
||||
|
||||
ath79_register_mdio(1, 0x0);
|
||||
|
||||
/* LAN */
|
||||
qihoo_c301_get_mac("lanmac=", ath79_eth1_data.mac_addr);
|
||||
|
||||
/* GMAC1 is connected to the internal switch */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
|
||||
ath79_register_eth(1);
|
||||
|
||||
/* WAN */
|
||||
qihoo_c301_get_mac("wanmac=", ath79_eth0_data.mac_addr);
|
||||
|
||||
/* GMAC0 is connected to the PHY4 of the internal switch */
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_switch_data.phy_poll_mask = BIT(0);
|
||||
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
gpio_request_one(QIHOO_C301_GPIO_USB_POWER,
|
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
||||
"USB power");
|
||||
ath79_register_usb();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_QIHOO_C301, "QIHOO-C301", "Qihoo 360 C301",
|
||||
qihoo_c301_setup);
|
@ -0,0 +1,16 @@
|
||||
#
|
||||
# Copyright (C) 2013 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/QIHOO360
|
||||
NAME:=Qihoo 360 C301
|
||||
PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-ath10k
|
||||
endef
|
||||
|
||||
define Profile/QIHOO360/Description
|
||||
Package set optimized for the Qihoo 360 C301 device.
|
||||
endef
|
||||
$(eval $(call Profile,QIHOO360))
|
@ -0,0 +1,40 @@
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -1034,6 +1034,17 @@
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
+config ATH79_MACH_QIHOO_C301
|
||||
+ bool "Qihoo 360 C301 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_NVRAM
|
||||
+
|
||||
endmenu
|
||||
|
||||
config SOC_AR71XX
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -80,6 +80,7 @@
|
||||
ATH79_MACH_OM5P, /* OpenMesh OM5P */
|
||||
ATH79_MACH_PB42, /* Atheros PB42 */
|
||||
ATH79_MACH_PB92, /* Atheros PB92 */
|
||||
+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
|
||||
ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
|
||||
ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
|
||||
ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -85,6 +85,7 @@
|
||||
obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
|
||||
+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
|
@ -0,0 +1,40 @@
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -1034,6 +1034,17 @@
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
+config ATH79_MACH_QIHOO_C301
|
||||
+ bool "Qihoo 360 C301 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_NVRAM
|
||||
+
|
||||
endmenu
|
||||
|
||||
config SOC_AR71XX
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -80,6 +80,7 @@
|
||||
ATH79_MACH_OM5P, /* OpenMesh OM5P */
|
||||
ATH79_MACH_PB42, /* Atheros PB42 */
|
||||
ATH79_MACH_PB92, /* Atheros PB92 */
|
||||
+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
|
||||
ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
|
||||
ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
|
||||
ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -85,6 +85,7 @@
|
||||
obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
|
||||
+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
|
Loading…
Reference in New Issue