uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)

The current uboot default config for the A13 SOM erroneously enables support
for the AXP209 power regulator IC which is not present on the board.

This superfluous support module sets an incorrect initial clock frequency and
confuses the kernel, ultimately leading to a boot failure later on.

Properly disable the PMIC support and enable the EHCI support by translating
the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and
USB_EHCI_HCD symbols respectively.

Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and
refresh the remaining patches of the series while we're at it.

Reported-by: Mario Fischer <mario-fischer@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

package/boot/uboot-sunxi/patches/001-use-dtc-in-kernel.patch

@@ -1,7 +1,6 @@
-diff -ruN old/Makefile new/Makefile
---- old/Makefile	2015-04-13 16:53:03.000000000 +0200
-+++ new/Makefile	2015-07-31 15:52:08.920097812 +0200
-@@ -346,7 +346,7 @@
+--- a/Makefile
++++ b/Makefile
+@@ -348,7 +348,7 @@ OBJDUMP		= $(CROSS_COMPILE)objdump
  AWK		= awk
  PERL		= perl
  PYTHON		= python

package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.diff

@@ -1,20 +0,0 @@
-diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig
---- u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig	1970-01-01 01:00:00.000000000 +0100
-+++ u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig	2015-01-18 16:25:11.908986082 +0100
-@@ -0,0 +1,16 @@
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,NO_AXP,USB_EHCI"
-+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_MACH_SUN5I=y
-+CONFIG_DRAM_CLK=408
-+CONFIG_DRAM_ZQ=123
-+CONFIG_DRAM_EMR1=0
-+# CONFIG_CMD_IMLS is not set
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_CMD_FPGA is not set
-+CONFIG_DM_SERIAL=y
-+CONFIG_USB=y
-+CONFIG_DM_USB=y
-+CONFIG_SYS_NS16550=y

package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.patch

@@ -0,0 +1,21 @@
+--- /dev/null
++++ b/configs/OLIMEX_A13_SOM_defconfig
+@@ -0,0 +1,18 @@
++CONFIG_SPL=y
++CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
++CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_MACH_SUN5I=y
++CONFIG_DRAM_CLK=408
++CONFIG_DRAM_ZQ=123
++CONFIG_DRAM_EMR1=0
++# CONFIG_CMD_IMLS is not set
++# CONFIG_CMD_FLASH is not set
++# CONFIG_CMD_FPGA is not set
++CONFIG_DM_SERIAL=y
++CONFIG_USB=y
++CONFIG_DM_USB=y
++CONFIG_SYS_NS16550=y
++CONFIG_SUNXI_NO_PMIC=y
++CONFIG_USB_EHCI_HCD=y

package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch

@@ -1,7 +1,6 @@
-diff -ruN a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
---- a/arch/arm/dts/Makefile	2016-01-12 15:06:54.000000000 +0100
-+++ b/arch/arm/dts/Makefile	2016-01-30 15:31:50.000000000 +0100
-@@ -142,6 +142,7 @@
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -152,6 +152,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
  	sun6i-a31-m9.dtb \
  	sun6i-a31-mele-a1000g-quad.dtb \
  	sun6i-a31-mixtile-loftq.dtb \
@@ -9,9 +8,8 @@ diff -ruN a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
  	sun6i-a31s-cs908.dtb \
  	sun6i-a31s-primo81.dtb \
  	sun6i-a31s-sinovoip-bpi-m2.dtb
-diff -ruN a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
---- a/arch/arm/dts/sun6i-a31.dtsi	2016-01-12 15:06:54.000000000 +0100
-+++ b/arch/arm/dts/sun6i-a31.dtsi	2016-01-31 15:06:47.000000000 +0100
+--- a/arch/arm/dts/sun6i-a31.dtsi
++++ b/arch/arm/dts/sun6i-a31.dtsi
 @@ -643,6 +643,13 @@
  				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
  			};
@@ -26,9 +24,8 @@ diff -ruN a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
  			mmc0_pins_a: mmc0@0 {
  				allwinner,pins = "PF0", "PF1", "PF2",
  						 "PF3", "PF4", "PF5";
-diff -ruN a/arch/arm/dts/sun6i-a31-pangolin.dts b/arch/arm/dts/sun6i-a31-pangolin.dts
---- a/arch/arm/dts/sun6i-a31-pangolin.dts	1970-01-01 01:00:00.000000000 +0100
-+++ b/arch/arm/dts/sun6i-a31-pangolin.dts	2016-02-09 01:21:44.965168099 +0100
+--- /dev/null
++++ b/arch/arm/dts/sun6i-a31-pangolin.dts
 @@ -0,0 +1,292 @@
 +/*
 + * Copyright 2015, Theobroma Systems Design und Consulting GmbH
@@ -322,9 +319,8 @@ diff -ruN a/arch/arm/dts/sun6i-a31-pangolin.dts b/arch/arm/dts/sun6i-a31-pangoli
 +	status = "okay";
 +	usb1_vbus-supply = <&reg_usb1_vbus>;
 +};
-diff -ruN a/configs/pangolin_defconfig b/configs/pangolin_defconfig
---- a/configs/pangolin_defconfig	1970-01-01 01:00:00.000000000 +0100
-+++ b/configs/pangolin_defconfig	2016-01-30 14:43:59.000000000 +0100
+--- /dev/null
++++ b/configs/pangolin_defconfig
 @@ -0,0 +1,36 @@
 +CONFIG_SUNXI_PANGOLIN=y
 +CONFIG_SPL=y
@@ -362,8 +358,6 @@ diff -ruN a/configs/pangolin_defconfig b/configs/pangolin_defconfig
 +CONFIG_DM_SPI=y
 +CONFIG_DM_SPI_FLASH=y
 +CONFIG_SUNXI_SPI=y
-diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
-index e155c4c..1b147b2 100644
 --- a/board/sunxi/Kconfig
 +++ b/board/sunxi/Kconfig
 @@ -15,7 +15,6 @@ config SUNXI_GEN_SUN6I
@@ -374,9 +368,9 @@ index e155c4c..1b147b2 100644
  choice
  	prompt "Sunxi SoC Variant"
  	optional
-@@ -80,6 +79,14 @@ config MACH_SUN8I
- 	bool
- 	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33
+@@ -533,6 +532,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+ 	Set the SCL pin for the LCD i2c interface. This takes a string in the
+ 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
  
 +choice
 +	prompt "Sunxi Board Variant"
@@ -387,8 +381,5 @@ index e155c4c..1b147b2 100644
 +
 +endchoice
  
- config DRAM_CLK
- 	int "sunxi dram clock speed"
--- 
-cgit v0.10.2
-
+ # Note only one of these may be selected at a time! But hidden choices are
+ # not supported by Kconfig

package/boot/uboot-sunxi/patches/010-dt-sync-files-with-kernel.patch

@@ -18,9 +18,6 @@ Acked-by: Ian Campbell <ijc@hellion.org.uk>
  create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h
  create mode 100644 include/dt-bindings/input/linux-event-codes.h
 
-diff --git a/include/dt-bindings/clock/sun4i-a10-pll2.h b/include/dt-bindings/clock/sun4i-a10-pll2.h
-new file mode 100644
-index 0000000..071c811
 --- /dev/null
 +++ b/include/dt-bindings/clock/sun4i-a10-pll2.h
 @@ -0,0 +1,53 @@
@@ -77,8 +74,6 @@ index 0000000..071c811
 +#define SUN4I_A10_PLL2_8X	3
 +
 +#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */
-diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h
-index 042e7b3..a214133 100644
 --- a/include/dt-bindings/input/input.h
 +++ b/include/dt-bindings/input/input.h
 @@ -9,515 +9,7 @@
@@ -598,9 +593,6 @@ index 042e7b3..a214133 100644
  
  #define MATRIX_KEY(row, col, code)	\
  	((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
-diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h
-new file mode 100644
-index 0000000..87cf351
 --- /dev/null
 +++ b/include/dt-bindings/input/linux-event-codes.h
 @@ -0,0 +1,805 @@

package/boot/uboot-sunxi/patches/011-dt-sync-dts-files-with-kernel.patch

@@ -93,8 +93,6 @@ Acked-by: Ian Campbell <ijc@hellion.org.uk>
  create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
  create mode 100644 arch/arm/dts/sunxi-itead-core-common.dtsi
 
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 578038b..0cea4b4 100644
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
 @@ -126,6 +126,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
@@ -105,8 +103,8 @@ index 578038b..0cea4b4 100644
  	sun4i-a10-pov-protab2-ips9.dtb
  dtb-$(CONFIG_MACH_SUN5I) += \
  	sun5i-a10s-auxtek-t003.dtb \
-@@ -154,7 +155,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \
- 	sun6i-a31-mixtile-loftq.dtb \
+@@ -155,7 +156,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+ 	sun6i-a31-pangolin.dtb \
  	sun6i-a31s-cs908.dtb \
  	sun6i-a31s-primo81.dtb \
 -	sun6i-a31s-sinovoip-bpi-m2.dtb
@@ -116,7 +114,7 @@ index 578038b..0cea4b4 100644
  dtb-$(CONFIG_MACH_SUN7I) += \
  	sun7i-a20-ainol-aw1.dtb \
  	sun7i-a20-bananapi.dtb \
-@@ -163,6 +166,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
+@@ -164,6 +167,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
  	sun7i-a20-cubietruck.dtb \
  	sun7i-a20-hummingbird.dtb \
  	sun7i-a20-i12-tvbox.dtb \
@@ -125,7 +123,7 @@ index 578038b..0cea4b4 100644
  	sun7i-a20-lamobo-r1.dtb \
  	sun7i-a20-m3.dtb \
  	sun7i-a20-m5.dtb \
-@@ -189,6 +194,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
+@@ -190,6 +195,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
  	sun8i-a33-sinlinx-sina33.dtb
  dtb-$(CONFIG_MACH_SUN8I_A83T) += \
  	sun8i-a83t-allwinner-h8homlet-v2.dtb \
@@ -133,9 +131,6 @@ index 578038b..0cea4b4 100644
  	sun8i-a83t-sinovoip-bpi-m3.dtb
  dtb-$(CONFIG_MACH_SUN8I_H3) += \
  	sun8i-h3-orangepi-pc.dtb \
-diff --git a/arch/arm/dts/axp22x.dtsi b/arch/arm/dts/axp22x.dtsi
-new file mode 100644
-index 0000000..0cfec50
 --- /dev/null
 +++ b/arch/arm/dts/axp22x.dtsi
 @@ -0,0 +1,145 @@
@@ -284,8 +279,6 @@ index 0000000..0cfec50
 +		};
 +	};
 +};
-diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts
-index 2630d78..97570cb 100644
 --- a/arch/arm/dts/sun4i-a10-a1000.dts
 +++ b/arch/arm/dts/sun4i-a10-a1000.dts
 @@ -93,6 +93,10 @@
@@ -299,8 +292,6 @@ index 2630d78..97570cb 100644
  &ehci0 {
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
-index 1430568..023b03e 100644
 --- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
 +++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
 @@ -45,6 +45,7 @@
@@ -339,8 +330,6 @@ index 1430568..023b03e 100644
  &lradc {
  	vref-supply = <&reg_vcc3v0>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts
-index 046a84d..710e2ef 100644
 --- a/arch/arm/dts/sun4i-a10-cubieboard.dts
 +++ b/arch/arm/dts/sun4i-a10-cubieboard.dts
 @@ -83,6 +83,10 @@
@@ -354,8 +343,6 @@ index 046a84d..710e2ef 100644
  &cpu0 {
  	cpu-supply = <&reg_dcdc2>;
  };
-diff --git a/arch/arm/dts/sun4i-a10-gemei-g9.dts b/arch/arm/dts/sun4i-a10-gemei-g9.dts
-index 570754d..ac64781 100644
 --- a/arch/arm/dts/sun4i-a10-gemei-g9.dts
 +++ b/arch/arm/dts/sun4i-a10-gemei-g9.dts
 @@ -47,6 +47,7 @@
@@ -470,8 +457,6 @@ index 570754d..ac64781 100644
  &reg_usb1_vbus {
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts
-index 487ce63..e09053b 100644
 --- a/arch/arm/dts/sun4i-a10-inet1.dts
 +++ b/arch/arm/dts/sun4i-a10-inet1.dts
 @@ -47,6 +47,7 @@
@@ -562,8 +547,6 @@ index 487ce63..e09053b 100644
  &reg_dcdc2 {
  	regulator-always-on;
  	regulator-min-microvolt = <1000000>;
-diff --git a/arch/arm/dts/sun4i-a10-inet97fv2.dts b/arch/arm/dts/sun4i-a10-inet97fv2.dts
-index 6c927a8..04b0d2d 100644
 --- a/arch/arm/dts/sun4i-a10-inet97fv2.dts
 +++ b/arch/arm/dts/sun4i-a10-inet97fv2.dts
 @@ -47,6 +47,8 @@
@@ -737,8 +720,6 @@ index 6c927a8..04b0d2d 100644
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
-index 8446465..bba4f9c 100644
 --- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
 +++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts
 @@ -59,6 +59,159 @@
@@ -949,8 +930,6 @@ index 8446465..bba4f9c 100644
  	usb0_id_detect_pin: usb0_id_detect_pin@0 {
  		allwinner,pins = "PH4";
  		allwinner,function = "gpio_in";
-diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
-index 985e155..4e798f0 100644
 --- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
 +++ b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
 @@ -1,5 +1,6 @@
@@ -1085,8 +1064,6 @@ index 985e155..4e798f0 100644
 -	usb2_vbus-supply = <&reg_usb2_vbus>;
 -	status = "okay";
 -};
-diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
-index dc2f2ae..7afc7a6 100644
 --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts
 +++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts
 @@ -156,6 +156,10 @@
@@ -1126,8 +1103,6 @@ index dc2f2ae..7afc7a6 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts
-index 02158bc..8e50723 100644
 --- a/arch/arm/dts/sun4i-a10-marsboard.dts
 +++ b/arch/arm/dts/sun4i-a10-marsboard.dts
 @@ -91,6 +91,10 @@
@@ -1182,8 +1157,6 @@ index 02158bc..8e50723 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun4i-a10-mk802.dts b/arch/arm/dts/sun4i-a10-mk802.dts
-index 3c7eebe..ee46ea8 100644
 --- a/arch/arm/dts/sun4i-a10-mk802.dts
 +++ b/arch/arm/dts/sun4i-a10-mk802.dts
 @@ -44,6 +44,7 @@
@@ -1260,8 +1233,6 @@ index 3c7eebe..ee46ea8 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
-index 28e32ad..b350448 100644
 --- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
 +++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
 @@ -124,6 +124,18 @@
@@ -1283,8 +1254,6 @@ index 28e32ad..b350448 100644
  &mdio {
  	status = "okay";
  
-diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts
-index 4e3e1b9..39034aa 100644
 --- a/arch/arm/dts/sun4i-a10-pcduino.dts
 +++ b/arch/arm/dts/sun4i-a10-pcduino.dts
 @@ -104,6 +104,10 @@
@@ -1386,9 +1355,6 @@ index 4e3e1b9..39034aa 100644
 +	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun4i-a10-pcduino2.dts b/arch/arm/dts/sun4i-a10-pcduino2.dts
-new file mode 100644
-index 0000000..de483a1
 --- /dev/null
 +++ b/arch/arm/dts/sun4i-a10-pcduino2.dts
 @@ -0,0 +1,78 @@
@@ -1470,8 +1436,6 @@ index 0000000..de483a1
 +	usb2_vbus-supply = <&reg_usb2_vbus>;
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
-index 223515e..ea90634 100644
 --- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
 +++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
 @@ -47,6 +47,7 @@
@@ -1589,8 +1553,6 @@ index 223515e..ea90634 100644
  &reg_dcdc2 {
  	regulator-always-on;
  	regulator-min-microvolt = <1000000>;
-diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi
-index 463bacd..2c8f5e6 100644
 --- a/arch/arm/dts/sun4i-a10.dtsi
 +++ b/arch/arm/dts/sun4i-a10.dtsi
 @@ -45,6 +45,7 @@
@@ -1840,8 +1802,6 @@ index 463bacd..2c8f5e6 100644
  		sid: eeprom@01c23800 {
  			compatible = "allwinner,sun4i-a10-sid";
  			reg = <0x01c23800 0x10>;
-diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
-index 2b3511e..a790ec8 100644
 --- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
 +++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts
 @@ -86,6 +86,20 @@
@@ -1865,8 +1825,6 @@ index 2b3511e..a790ec8 100644
  &mmc0 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
-diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
-index 5a422c1..86d046a 100644
 --- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
 +++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
 @@ -111,7 +111,7 @@
@@ -1878,8 +1836,6 @@ index 5a422c1..86d046a 100644
  		pagesize = <16>;
  		reg = <0x50>;
  		read-only;
-diff --git a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
-index 7fbb0b0..6efbba6 100644
 --- a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
 +++ b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
 @@ -123,7 +123,7 @@
@@ -1920,8 +1876,6 @@ index 7fbb0b0..6efbba6 100644
  		allwinner,pins = "PG0";
  		allwinner,function = "gpio_in";
  		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-diff --git a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
-index 6d466a2..1b11ec9 100644
 --- a/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
 +++ b/arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
 @@ -123,21 +123,6 @@
@@ -1976,8 +1930,6 @@ index 6d466a2..1b11ec9 100644
 +	usb1_vbus-supply = <&reg_ldo3>;
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
-index eb793d5..fa9ddfd 100644
 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
 +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
 @@ -47,11 +47,21 @@
@@ -2043,8 +1995,6 @@ index eb793d5..fa9ddfd 100644
  &reg_dcdc2 {
  	regulator-always-on;
  	regulator-min-microvolt = <1000000>;
-diff --git a/arch/arm/dts/sun5i-q8-common.dtsi b/arch/arm/dts/sun5i-q8-common.dtsi
-index 0641d68..a78e189 100644
 --- a/arch/arm/dts/sun5i-q8-common.dtsi
 +++ b/arch/arm/dts/sun5i-q8-common.dtsi
 @@ -41,11 +41,21 @@
@@ -2069,8 +2019,6 @@ index 0641d68..a78e189 100644
  	chosen {
  		stdout-path = "serial0:115200n8";
  	};
-diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts
-index abf3ccb..6ad19e2 100644
 --- a/arch/arm/dts/sun5i-r8-chip.dts
 +++ b/arch/arm/dts/sun5i-r8-chip.dts
 @@ -64,6 +64,26 @@
@@ -2151,8 +2099,6 @@ index abf3ccb..6ad19e2 100644
  &reg_ldo5 {
  	regulator-min-microvolt = <1800000>;
  	regulator-max-microvolt = <1800000>;
-diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi
-index 9ffee9b..59a9426 100644
 --- a/arch/arm/dts/sun5i.dtsi
 +++ b/arch/arm/dts/sun5i.dtsi
 @@ -44,6 +44,7 @@
@@ -2214,8 +2160,6 @@ index 9ffee9b..59a9426 100644
  		sid: eeprom@01c23800 {
  			compatible = "allwinner,sun4i-a10-sid";
  			reg = <0x01c23800 0x10>;
-diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts
-index 0d0b6f2..f9cf368 100644
 --- a/arch/arm/dts/sun6i-a31-colombus.dts
 +++ b/arch/arm/dts/sun6i-a31-colombus.dts
 @@ -60,6 +60,16 @@
@@ -2263,8 +2207,6 @@ index 0d0b6f2..f9cf368 100644
  };
  
  &reg_usb2_vbus {
-diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts
-index d0cfada..9a74637 100644
 --- a/arch/arm/dts/sun6i-a31-hummingbird.dts
 +++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
 @@ -54,6 +54,8 @@
@@ -2454,8 +2396,6 @@ index d0cfada..9a74637 100644
  &reg_usb1_vbus {
  	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
  	status = "okay";
-diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
-index 44f889f..1867af2 100644
 --- a/arch/arm/dts/sun6i-a31.dtsi
 +++ b/arch/arm/dts/sun6i-a31.dtsi
 @@ -61,7 +61,7 @@
@@ -2543,7 +2483,7 @@ index 44f889f..1867af2 100644
  			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
  					     "usb_ohci0", "usb_ohci1",
  					     "usb_ohci2";
-@@ -677,6 +709,16 @@
+@@ -684,6 +716,16 @@
  				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
  			};
  
@@ -2560,7 +2500,7 @@ index 44f889f..1867af2 100644
  			gmac_pins_mii_a: gmac_mii@0 {
  				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
  						"PA8", "PA9", "PA11",
-@@ -754,6 +796,13 @@
+@@ -761,6 +803,13 @@
  			reg = <0x01c20ca0 0x20>;
  		};
  
@@ -2574,7 +2514,7 @@ index 44f889f..1867af2 100644
  		rtp: rtp@01c25000 {
  			compatible = "allwinner,sun6i-a31-ts";
  			reg = <0x01c25000 0x100>;
-@@ -900,6 +949,16 @@
+@@ -907,6 +956,16 @@
  			#size-cells = <0>;
  		};
  
@@ -2591,7 +2531,7 @@ index 44f889f..1867af2 100644
  		timer@01c60000 {
  			compatible = "allwinner,sun6i-a31-hstimer",
  				     "allwinner,sun7i-a20-hstimer";
-@@ -1061,7 +1120,7 @@
+@@ -1068,7 +1127,7 @@
  			resets = <&apb0_rst 0>;
  			gpio-controller;
  			interrupt-controller;
@@ -2600,8 +2540,6 @@ index 44f889f..1867af2 100644
  			#size-cells = <0>;
  			#gpio-cells = <3>;
  
-diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts
-index cfdc03e..379746a 100644
 --- a/arch/arm/dts/sun6i-a31s-primo81.dts
 +++ b/arch/arm/dts/sun6i-a31s-primo81.dts
 @@ -1,16 +1,57 @@
@@ -2871,9 +2809,6 @@ index cfdc03e..379746a 100644
 +	usb1_vbus-supply = <&reg_dldo1>;
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
-new file mode 100644
-index 0000000..4ec0c86
 --- /dev/null
 +++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
 @@ -0,0 +1,142 @@
@@ -3019,9 +2954,6 @@ index 0000000..4ec0c86
 +	status = "okay";
 +};
 +
-diff --git a/arch/arm/dts/sun6i-a31s-sina31s.dts b/arch/arm/dts/sun6i-a31s-sina31s.dts
-new file mode 100644
-index 0000000..6ead2f5
 --- /dev/null
 +++ b/arch/arm/dts/sun6i-a31s-sina31s.dts
 @@ -0,0 +1,153 @@
@@ -3178,9 +3110,6 @@ index 0000000..6ead2f5
 +&usbphy {
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
-new file mode 100644
-index 0000000..360adfb
 --- /dev/null
 +++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
 @@ -0,0 +1,205 @@
@@ -3389,8 +3318,6 @@ index 0000000..360adfb
 +	usb2_vbus-supply = <&reg_dc1sw>;
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
-index 9f7b472..67c8a76 100644
 --- a/arch/arm/dts/sun7i-a20-bananapi.dts
 +++ b/arch/arm/dts/sun7i-a20-bananapi.dts
 @@ -92,6 +92,24 @@
@@ -3511,8 +3438,6 @@ index 9f7b472..67c8a76 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
-index 39a51d5..1fa832d 100644
 --- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
 +++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
 @@ -84,6 +84,10 @@
@@ -3572,8 +3497,6 @@ index 39a51d5..1fa832d 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
-index e6b0192..8da939a 100644
 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts
 +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
 @@ -101,6 +101,10 @@
@@ -3587,9 +3510,6 @@ index e6b0192..8da939a 100644
  &cpu0 {
  	cpu-supply = <&reg_dcdc2>;
  };
-diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts
-new file mode 100644
-index 0000000..f5b5325
 --- /dev/null
 +++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
 @@ -0,0 +1,169 @@
@@ -3762,9 +3682,6 @@ index 0000000..f5b5325
 +	usb2_vbus-supply = <&reg_usb2_vbus>;
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts
-new file mode 100644
-index 0000000..661c21d
 --- /dev/null
 +++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
 @@ -0,0 +1,125 @@
@@ -3893,8 +3810,6 @@ index 0000000..661c21d
 +&reg_ahci_5v {
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-index 975b0b2..5ee43d8 100644
 --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
 +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
 @@ -97,16 +97,6 @@
@@ -3914,8 +3829,6 @@ index 975b0b2..5ee43d8 100644
  };
  
  &ehci0 {
-diff --git a/arch/arm/dts/sun7i-a20-mk808c.dts b/arch/arm/dts/sun7i-a20-mk808c.dts
-index 4f432f8..90ff4a2 100644
 --- a/arch/arm/dts/sun7i-a20-mk808c.dts
 +++ b/arch/arm/dts/sun7i-a20-mk808c.dts
 @@ -53,6 +53,7 @@
@@ -3986,8 +3899,6 @@ index 4f432f8..90ff4a2 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
-index 6904dbd..23aacce 100644
 --- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
 +++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
 @@ -1,5 +1,6 @@
@@ -4155,8 +4066,6 @@ index 6904dbd..23aacce 100644
  	usb0_vbus-supply = <&reg_usb0_vbus>;
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
-diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
-index 0423708..35ad700 100644
 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
 +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
 @@ -117,6 +117,18 @@
@@ -4178,8 +4087,6 @@ index 0423708..35ad700 100644
  &mmc0 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
-index 8acff78..d5c796c 100644
 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
 +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
 @@ -170,6 +170,12 @@
@@ -4265,8 +4172,6 @@ index 8acff78..d5c796c 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
-index c5d70ca..7e3006f 100644
 --- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
 +++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
 @@ -125,6 +125,12 @@
@@ -4282,8 +4187,6 @@ index c5d70ca..7e3006f 100644
  };
  
  &i2c2 {
-diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
-index 73cd81e..2be04c4 100644
 --- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
 +++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
 @@ -95,6 +95,10 @@
@@ -4349,8 +4252,6 @@ index 73cd81e..2be04c4 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
-index 55a06ce..71125bf 100644
 --- a/arch/arm/dts/sun7i-a20-orangepi.dts
 +++ b/arch/arm/dts/sun7i-a20-orangepi.dts
 @@ -141,7 +141,18 @@
@@ -4405,8 +4306,6 @@ index 55a06ce..71125bf 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
-index 5361fce..ddac732 100644
 --- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
 +++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
 @@ -82,6 +82,14 @@
@@ -4527,8 +4426,6 @@ index 5361fce..ddac732 100644
 +	usb2_vbus-supply = <&reg_usb1_vbus>;
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
-index afc9ece..1a8b39b 100644
 --- a/arch/arm/dts/sun7i-a20-pcduino3.dts
 +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
 @@ -111,6 +111,14 @@
@@ -4638,8 +4535,6 @@ index afc9ece..1a8b39b 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
-index 83c6d3f..2f6b21a 100644
 --- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
 +++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
 @@ -48,6 +48,7 @@
@@ -4787,8 +4682,6 @@ index 83c6d3f..2f6b21a 100644
  	usb1_vbus-supply = <&reg_usb1_vbus>;
  	usb2_vbus-supply = <&reg_usb2_vbus>;
  	status = "okay";
-diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
-index e7d84fe..dc31d47 100644
 --- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
 +++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
 @@ -1,13 +1,52 @@
@@ -5012,8 +4905,6 @@ index e7d84fe..dc31d47 100644
 +	usb2_vbus-supply = <&reg_usb2_vbus>;
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
-index 71ab6b8..0940a78 100644
 --- a/arch/arm/dts/sun7i-a20.dtsi
 +++ b/arch/arm/dts/sun7i-a20.dtsi
 @@ -47,6 +47,7 @@
@@ -5220,8 +5111,6 @@ index 71ab6b8..0940a78 100644
  		sid: eeprom@01c23800 {
  			compatible = "allwinner,sun7i-a20-sid";
  			reg = <0x01c23800 0x200>;
-diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
-index 9c4a55c..7e05e09 100644
 --- a/arch/arm/dts/sun8i-a23-a33.dtsi
 +++ b/arch/arm/dts/sun8i-a23-a33.dtsi
 @@ -56,7 +56,7 @@
@@ -5364,8 +5253,6 @@ index 9c4a55c..7e05e09 100644
 +		};
  	};
  };
-diff --git a/arch/arm/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
-index 1aeb06c..b2ce284 100644
 --- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts
 +++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts
 @@ -47,15 +47,26 @@
@@ -5535,8 +5422,6 @@ index 1aeb06c..b2ce284 100644
 +	usb1_vbus-supply = <&reg_dldo1>;
  	status = "okay";
  };
-diff --git a/arch/arm/dts/sun8i-a23.dtsi b/arch/arm/dts/sun8i-a23.dtsi
-index 2cc27c7..92e6616 100644
 --- a/arch/arm/dts/sun8i-a23.dtsi
 +++ b/arch/arm/dts/sun8i-a23.dtsi
 @@ -50,6 +50,31 @@
@@ -5571,8 +5456,6 @@ index 2cc27c7..92e6616 100644
  		mbus_clk: clk@01c2015c {
  			#clock-cells = <0>;
  			compatible = "allwinner,sun8i-a23-mbus-clk";
-diff --git a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
-index 1d5390d..fef6abc 100644
 --- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
 +++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
 @@ -68,7 +68,7 @@
@@ -5692,8 +5575,6 @@ index 1d5390d..fef6abc 100644
  &uart0 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&uart0_pins_b>;
-diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi
-index faa7d3c..001d840 100644
 --- a/arch/arm/dts/sun8i-a33.dtsi
 +++ b/arch/arm/dts/sun8i-a33.dtsi
 @@ -72,6 +72,41 @@
@@ -5755,9 +5636,6 @@ index faa7d3c..001d840 100644
  		usb_otg: usb@01c19000 {
  			compatible = "allwinner,sun8i-a33-musb";
  			reg = <0x01c19000 0x0400>;
-diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
-new file mode 100644
-index 0000000..88b1e09
 --- /dev/null
 +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
 @@ -0,0 +1,65 @@
@@ -5826,8 +5704,6 @@ index 0000000..88b1e09
 +	pinctrl-0 = <&uart0_pins_b>;
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
-index 245b819..d3473f8 100644
 --- a/arch/arm/dts/sun8i-a83t.dtsi
 +++ b/arch/arm/dts/sun8i-a83t.dtsi
 @@ -52,12 +52,6 @@
@@ -6039,8 +5915,6 @@ index 245b819..d3473f8 100644
 +		};
  	};
  };
-diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts
-index 4b25dcc..30ccca0 100644
 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts
 +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts
 @@ -45,6 +45,7 @@
@@ -6140,8 +6014,6 @@ index 4b25dcc..30ccca0 100644
  &uart0 {
  	pinctrl-names = "default";
  	pinctrl-0 = <&uart0_pins_a>;
-diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
-index 1cb6c66..900ec4f 100644
 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts
 +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts
 @@ -45,6 +45,7 @@
@@ -6221,8 +6093,6 @@ index 1cb6c66..900ec4f 100644
  };
  
  &ehci1 {
-diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
-index 0faa38a..c2f63c5 100644
 --- a/arch/arm/dts/sun8i-h3.dtsi
 +++ b/arch/arm/dts/sun8i-h3.dtsi
 @@ -83,12 +83,6 @@
@@ -6590,8 +6460,6 @@ index 0faa38a..c2f63c5 100644
 +		};
  	};
  };
-diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi
-index 07cd268..346a49d 100644
 --- a/arch/arm/dts/sun8i-q8-common.dtsi
 +++ b/arch/arm/dts/sun8i-q8-common.dtsi
 @@ -41,11 +41,23 @@
@@ -6718,8 +6586,6 @@ index 07cd268..346a49d 100644
 +&simplefb_lcd {
 +	vcc-lcd-supply = <&reg_dc1sw>;
 +};
-diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts
-index 6484dcf..eb2ccd0 100644
 --- a/arch/arm/dts/sun9i-a80-cubieboard4.dts
 +++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts
 @@ -62,9 +62,31 @@
@@ -6775,8 +6641,6 @@ index 6484dcf..eb2ccd0 100644
  	status = "okay";
  };
  
-diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts
-index 6ce4b5e..d7a20d9 100644
 --- a/arch/arm/dts/sun9i-a80-optimus.dts
 +++ b/arch/arm/dts/sun9i-a80-optimus.dts
 @@ -65,7 +65,7 @@
@@ -6870,8 +6734,6 @@ index 6ce4b5e..d7a20d9 100644
  };
  
  &usbphy1 {
-diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi
-index a43ad77..f68b324 100644
 --- a/arch/arm/dts/sun9i-a80.dtsi
 +++ b/arch/arm/dts/sun9i-a80.dtsi
 @@ -128,6 +128,17 @@
@@ -7196,9 +7058,6 @@ index a43ad77..f68b324 100644
 +		};
  	};
  };
-diff --git a/arch/arm/dts/sunxi-itead-core-common.dtsi b/arch/arm/dts/sunxi-itead-core-common.dtsi
-new file mode 100644
-index 0000000..2565d51
 --- /dev/null
 +++ b/arch/arm/dts/sunxi-itead-core-common.dtsi
 @@ -0,0 +1,136 @@
@@ -7338,8 +7197,6 @@ index 0000000..2565d51
 +	usb2_vbus-supply = <&reg_usb2_vbus>;
 +	status = "okay";
 +};
-diff --git a/arch/arm/dts/sunxi-q8-common.dtsi b/arch/arm/dts/sunxi-q8-common.dtsi
-index 17b26ff..b824146 100644
 --- a/arch/arm/dts/sunxi-q8-common.dtsi
 +++ b/arch/arm/dts/sunxi-q8-common.dtsi
 @@ -75,3 +75,9 @@

package/boot/uboot-sunxi/patches/012-sun6i-fix-clock_twi_onoff.patch

@@ -12,8 +12,6 @@ Acked-by: Ian Campbell <ijc@hellion.org.uk>
  arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 11 ++++++++---
  1 file changed, 8 insertions(+), 3 deletions(-)
 
-diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-index 700b605..4e1e1a4 100644
 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
 +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
 @@ -100,13 +100,18 @@ int clock_twi_onoff(int port, int state)

package/boot/uboot-sunxi/patches/013-enable-realtek-phy.patch

@@ -12,11 +12,9 @@ Acked-by: Ian Campbell <ijc@hellion.org.uk>
  include/configs/sunxi-common.h | 1 +
  1 file changed, 1 insertion(+)
 
-diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
-index b26363d..ea15e37 100644
 --- a/include/configs/sunxi-common.h
 +++ b/include/configs/sunxi-common.h
-@@ -310,6 +310,7 @@ extern int soft_i2c_gpio_scl;
+@@ -314,6 +314,7 @@ extern int soft_i2c_gpio_scl;
  #define CONFIG_PHY_GIGE			/* GMAC can use gigabit PHY	*/
  #define CONFIG_PHY_ADDR		1
  #define CONFIG_MII			/* MII PHY management		*/

package/boot/uboot-sunxi/patches/014-fix-gmac-init.patch

@@ -28,11 +28,9 @@ Tested-by: Michael Haas <haas@computerlinguist.org>
  board/sunxi/gmac.c                          | 14 +-------------
  4 files changed, 12 insertions(+), 41 deletions(-)
 
-diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
-index e80785b..7653148 100644
 --- a/arch/arm/cpu/armv7/sunxi/board.c
 +++ b/arch/arm/cpu/armv7/sunxi/board.c
-@@ -152,6 +152,7 @@ void s_init(void)
+@@ -136,6 +136,7 @@ void s_init(void)
  	timer_init();
  	gpio_init();
  	i2c_init_board();
@@ -40,7 +38,7 @@ index e80785b..7653148 100644
  }
  
  #ifdef CONFIG_SPL_BUILD
-@@ -259,30 +260,3 @@ void enable_caches(void)
+@@ -243,30 +244,3 @@ void enable_caches(void)
  	dcache_enable();
  }
  #endif
@@ -71,8 +69,6 @@ index e80785b..7653148 100644
 -	return 0;
 -}
 -#endif
-diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h
-index 9df3744..a373319 100644
 --- a/arch/arm/include/asm/arch-sunxi/sys_proto.h
 +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h
 @@ -24,6 +24,10 @@ void sdelay(unsigned long);
@@ -87,8 +83,6 @@ index 9df3744..a373319 100644
 +#endif
  
  #endif
-diff --git a/board/sunxi/board.c b/board/sunxi/board.c
-index 80eae9c..e16718f 100644
 --- a/board/sunxi/board.c
 +++ b/board/sunxi/board.c
 @@ -90,6 +90,11 @@ int board_init(void)
@@ -103,8 +97,6 @@ index 80eae9c..e16718f 100644
  	/* Uses dm gpio code so do this here and not in i2c_init_board() */
  	return soft_i2c_board_init();
  }
-diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
-index 4e222d8..69eb8ff 100644
 --- a/board/sunxi/gmac.c
 +++ b/board/sunxi/gmac.c
 @@ -6,7 +6,7 @@

package/boot/uboot-sunxi/patches/015-fix-2nd-usb-ctrler-on-sun47i.patch

@@ -16,8 +16,6 @@ Acked-by: Ian Campbell <ijc@hellion.org.uk>
  drivers/usb/host/ohci-sunxi.c | 15 ++++++++++++---
  2 files changed, 23 insertions(+), 5 deletions(-)
 
-diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
-index cf3dcc4..677a5d3 100644
 --- a/drivers/usb/host/ehci-sunxi.c
 +++ b/drivers/usb/host/ehci-sunxi.c
 @@ -17,6 +17,14 @@
@@ -35,7 +33,7 @@ index cf3dcc4..677a5d3 100644
  struct ehci_sunxi_priv {
  	struct ehci_ctrl ehci;
  	int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
-@@ -39,8 +47,9 @@ static int ehci_usb_probe(struct udevice *dev)
+@@ -39,8 +47,9 @@ static int ehci_usb_probe(struct udevice
  #ifdef CONFIG_MACH_SUN8I_H3
  	priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_OHCI0;
  #endif
@@ -47,8 +45,6 @@ index cf3dcc4..677a5d3 100644
  
  	setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
  #ifdef CONFIG_SUNXI_GEN_SUN6I
-diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
-index 1b1f651..d4fb95a 100644
 --- a/drivers/usb/host/ohci-sunxi.c
 +++ b/drivers/usb/host/ohci-sunxi.c
 @@ -17,6 +17,14 @@
@@ -66,7 +62,7 @@ index 1b1f651..d4fb95a 100644
  struct ohci_sunxi_priv {
  	ohci_t ohci;
  	int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
-@@ -42,9 +50,10 @@ static int ohci_usb_probe(struct udevice *dev)
+@@ -42,9 +50,10 @@ static int ohci_usb_probe(struct udevice
  	priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_EHCI0;
  #endif
  	priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;

package/boot/uboot-sunxi/patches/016-spl-print-mmc-slot.patch

@@ -14,11 +14,9 @@ Reviewed-by: Tom Rini <trini@konsulko.com>
  common/spl/spl.c | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
 
-diff --git a/common/spl/spl.c b/common/spl/spl.c
-index e5167bf..82e7f58 100644
 --- a/common/spl/spl.c
 +++ b/common/spl/spl.c
-@@ -210,9 +210,9 @@ struct boot_device_name boot_name_table[] = {
+@@ -210,9 +210,9 @@ struct boot_device_name boot_name_table[
  	{ BOOT_DEVICE_RAM, "RAM" },
  #endif
  #ifdef CONFIG_SPL_MMC_SUPPORT

package/boot/uboot-sunxi/patches/017-usb-add-support-for-usb3-vbus-pin.patch

@@ -12,8 +12,6 @@ Acked-by: Ian Campbell <ijc@hellion.org.uk>
  board/sunxi/Kconfig                | 6 ++++++
  2 files changed, 7 insertions(+)
 
-diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
-index 6ac96cc..0749fbd 100644
 --- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
 +++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
 @@ -76,6 +76,7 @@ static int get_vbus_gpio(int index)
@@ -24,11 +22,9 @@ index 6ac96cc..0749fbd 100644
  	}
  	return -EINVAL;
  }
-diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
-index 5e9d3af..5e72fac 100644
 --- a/board/sunxi/Kconfig
 +++ b/board/sunxi/Kconfig
-@@ -342,6 +342,12 @@ config USB2_VBUS_PIN
+@@ -341,6 +341,12 @@ config USB2_VBUS_PIN
  	---help---
  	See USB1_VBUS_PIN help text.
  

package/boot/uboot-sunxi/patches/018-usb-specify-vbus-pins-on-orangepis.patch

@@ -13,8 +13,6 @@ Acked-by: Ian Campbell <ijc@hellion.org.uk>
  configs/orangepi_plus_defconfig | 1 +
  2 files changed, 4 insertions(+)
 
-diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
-index aaf0f68..4e9051d 100644
 --- a/configs/orangepi_pc_defconfig
 +++ b/configs/orangepi_pc_defconfig
 @@ -14,3 +14,6 @@ CONFIG_SPL=y
@@ -24,8 +22,6 @@ index aaf0f68..4e9051d 100644
 +CONFIG_USB1_VBUS_PIN=""
 +CONFIG_USB2_VBUS_PIN=""
 +CONFIG_USB3_VBUS_PIN=""
-diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig
-index e52dcfc..6ecb30e 100644
 --- a/configs/orangepi_plus_defconfig
 +++ b/configs/orangepi_plus_defconfig
 @@ -14,3 +14,4 @@ CONFIG_SPL=y

package/boot/uboot-sunxi/patches/019-sid-add-efuse-support-for-h3-a83t.patch

@@ -14,8 +14,6 @@ Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 +++++++
  1 file changed, 7 insertions(+)
 
-diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
-index b6e11eb..65c0441 100644
 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
 +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
 @@ -82,7 +82,14 @@

package/boot/uboot-sunxi/patches/020-boot-display-board-model-on-startup.patch

@@ -11,8 +11,6 @@ Signed-off-by: Simon Glass <sjg@chromium.org>
  include/configs/sunxi-common.h | 1 +
  1 file changed, 1 insertion(+)
 
-diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
-index ff356e3..b26363d 100644
 --- a/include/configs/sunxi-common.h
 +++ b/include/configs/sunxi-common.h
 @@ -174,6 +174,7 @@

package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch

@@ -12,11 +12,9 @@ More specifically, the following settings are now used:
  * up to 1152MHz: mul=3, div=2 (unchanged)
  * above 1152MHz: mul=4, div=2 (was: mul=2, div=1)
 
-diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-index cfb32b4..2986539 100644
 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
 +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-@@ -102,11 +102,12 @@ void clock_set_pll1(unsigned int clk)
+@@ -122,11 +122,12 @@ void clock_set_pll1(unsigned int clk)
  	struct sunxi_ccm_reg * const ccm =
  		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
  	const int p = 0;
@@ -32,6 +30,3 @@ index cfb32b4..2986539 100644
  	} else if (clk > 768000000) {
  		k = 3;
  		m = 2;
--- 
-cgit v0.10.2
-

package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch

@@ -16,8 +16,6 @@ order of magnitude as Boot1.
 Furthermore, a bit of documentation is added to clarify that the
 required setting for the PLL LDO is 1.37v as per the A31 manual.
 
-diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
-index fa7ebd8..3a6e56e 100644
 --- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
 +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
 @@ -24,14 +24,27 @@ void clock_init_safe(void)
@@ -49,9 +47,7 @@ index fa7ebd8..3a6e56e 100644
 +
  	clock_set_pll1(408000000);
  
- 	writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div);
-diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
-index 82ed541..41a62a4 100644
+ 	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
 --- a/arch/arm/include/asm/arch-sunxi/prcm.h
 +++ b/arch/arm/include/asm/arch-sunxi/prcm.h
 @@ -111,13 +111,13 @@
@@ -72,6 +68,3 @@ index 82ed541..41a62a4 100644
  	__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
  #define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
  #define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
--- 
-cgit v0.10.2
-

package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch

@@ -4,11 +4,9 @@ Date: Tue, 16 Jun 2015 10:52:01 +0200
 Subject: sun6i: define alternate-function for UART2 on GPG
 
 
-diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
-index 8e67b3b..1fbf494 100644
 --- a/arch/arm/include/asm/arch-sunxi/gpio.h
 +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -177,6 +177,7 @@ enum sunxi_gpio_number {
+@@ -180,6 +180,7 @@ enum sunxi_gpio_number {
  #define SUN6I_GPG_SDC1		2
  #define SUN8I_GPG_SDC1		2
  #define SUN6I_GPG_TWI3		2
@@ -16,6 +14,3 @@ index 8e67b3b..1fbf494 100644
  #define SUN5I_GPG_UART1		4
  
  #define SUN4I_GPH_SDC1		5
--- 
-cgit v0.10.2
-

package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch

@@ -4,11 +4,9 @@ Date: Tue, 16 Jun 2015 10:53:11 +0200
 Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
 
 
-diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
-index 5f39aa0..99675c3 100644
 --- a/arch/arm/cpu/armv7/sunxi/board.c
 +++ b/arch/arm/cpu/armv7/sunxi/board.c
-@@ -76,6 +76,10 @@ static int gpio_init(void)
+@@ -88,6 +88,10 @@ static int gpio_init(void)
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
  	sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
@@ -19,8 +17,6 @@ index 5f39aa0..99675c3 100644
  #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
  	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2);
  	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
-diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
-index 9576bc1..bda4059 100644
 --- a/include/configs/sunxi-common.h
 +++ b/include/configs/sunxi-common.h
 @@ -260,6 +260,8 @@ extern int soft_i2c_gpio_scl;
@@ -32,6 +28,3 @@ index 9576bc1..bda4059 100644
  #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I)
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28800:115200"
  #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
--- 
-cgit v0.10.2
-

package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch

@@ -4,11 +4,9 @@ Date: Tue, 16 Jun 2015 10:59:38 +0200
 Subject: ARM: sunxi: Make CONS_INDEX configurable
 
 
-diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
-index 2a1cd3c..e155c4c 100644
 --- a/board/sunxi/Kconfig
 +++ b/board/sunxi/Kconfig
-@@ -209,6 +209,14 @@ config SYS_BOARD
+@@ -229,6 +229,14 @@ config SYS_BOARD
  config SYS_SOC
  	default "sunxi"
  
@@ -23,6 +21,3 @@ index 2a1cd3c..e155c4c 100644
  config UART0_PORT_F
  	bool "UART0 on MicroSD breakout board"
  	default n
--- 
-cgit v0.10.2
-