ramips: add support for Telco Electronics X1

Hardware:
SoC:   MT7621
DRAM:  256MB DDR3
Flash: 16MB SPI-NOR
WiFi:  2.4GHz: MT7603 @ PCIe0
WiFi:  5.8GHz: MT7612 @ PCIe1
Modem: Sierra Wireless MC74xx

Interfaces:
GBE RJ45 x5
mPCIe    x2
UART     x1
I2C      x1
JTAG     x1
UIM      x1
LEDs     x6

Flash instructions:
Flash from within the factory bootloader, firmware web interface or CLI using
sysupgrade -F -n

Signed-off-by: Nicholas Smith <mips171@icloud.com>
v19.07.3_mercusys_ac12_duma
Nicholas Smith 5 years ago committed by Christian Lamparter
parent f5d2c91415
commit 73e0f52b6e

@ -119,6 +119,7 @@ ramips_setup_interfaces()
rt-n12p|\
sap-g3200u3|\
sk-wb8|\
telco-electronics,x1|\
unielec,u7621-06-256m-16m|\
unielec,u7621-06-512m-64m|\
vr500|\

@ -22,6 +22,9 @@ head-weblink,hdrm200)
mikrotik,rb750gr3)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
;;
telco-electronics,x1)
ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16"
;;
ubnt-erx)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0"
;;

@ -0,0 +1,172 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "telco-electronics,x1", "mediatek,mt7621-soc";
model = "Telco Electronics X1";
aliases {
led-boot = &system_led;
led-failsafe = &system_led;
led-running = &system_led;
led-upgrade = &system_led;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
system_led: system {
label = "x1:green:system";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
modem_offline {
label = "x1:red:modem-offline";
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
};
modem_4g {
label = "x1:blue:modem-4g";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
modem_3g {
label = "x1:green:modem-3g";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
modem_rssi_lowest {
label = "x1:green:modem-rssi-lowest";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
modem_rssi_low {
label = "x1:green:modem-rssi-low";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
modem_rssi_medium {
label = "x1:green:modem-rssi-medium";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
modem_rssi_high {
label = "x1:green:modem-rssi-high";
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
};
modem_rssi_highest {
label = "x1:green:modem-rssi-highest";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
};
};
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <14000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
firmware: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&gpio0 {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0xe006>;
mediatek,portmap = "llllw";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "jtag", "uart2", "wdt", "rgmii2";
ralink,function = "gpio";
};
};
};
&pcie {
status = "okay";
pcie0 {
wifi@0,0 {
compatible = "pci14c3,7603";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
pcie1 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
};
};
};
};

@ -435,6 +435,14 @@ define Device/sk-wb8
endef
TARGET_DEVICES += sk-wb8
define Device/telco-electronics_x1
DTS := Telco-Electronics-X1
IMAGE_SIZE := 16064k
DEVICE_TITLE := Telco Electronics X1
DEVICE_PACKAGES := kmod-usb3 kmod-mt76 wpad-basic
endef
TARGET_DEVICES += telco-electronics_x1
define Device/timecloud
DTS := Timecloud
DEVICE_TITLE := Thunder Timecloud

Loading…
Cancel
Save