dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

sunxi: various changes - let LBDAF be set by generic config - add high-speed timer support - refresh sun5i USB patch

Browse Source 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39223
v19.07.3_mercusys_ac12_duma
Zoltan Herpai 11 years ago
parent 1ae42098e9
commit 719b57cbc1
6 changed files with 425 additions and 4 deletions
Show Stats Download Patch File Download Diff File

2
target/linux/sunxi/config-3.12
Unescape Escape View File

@ -235,7 +235,6 @@ CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_KSM=y
CONFIG_KTIME_SCALAR=y
# CONFIG_LBDAF is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEGACY_PTYS=y
@ -359,6 +358,7 @@ CONFIG_STOP_MACHINE=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_SUN4I_EMAC is not set
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
# CONFIG_SUNXI_WATCHDOG is not set
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y

297
target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch
Unescape Escape View File

@ -0,0 +1,297 @@
From 3bf30f6381f9287eb99ce096bf2fa327a69c8a71 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] clocksource: Add Allwinner SoCs HS timers driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Most of the Allwinner SoCs (at this time, all but the A10) also have a
High Speed timers that are not using the 24MHz oscillator as a source
but rather the AHB clock running much faster.
The IP is slightly different between the A10s/A13 and the one used in
the A20/A31, since the latter have 4 timers available, while the former
have only 2 of them.
[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
alphabetically"
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
.../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 22 +++
arch/arm/mach-sunxi/Kconfig | 1 +
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-sun5i.c | 192 +++++++++++++++++++++
5 files changed, 220 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
create mode 100644 drivers/clocksource/timer-sun5i.c
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
new file mode 100644
index 0000000..7c26154
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -0,0 +1,22 @@
+Allwinner SoCs High Speed Timer Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sun5i-a13-hstimer" or
+ "allwinner,sun7i-a20-hstimer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i
+ one)
+- clocks: phandle to the source clock (usually the AHB clock)
+
+Example:
+
+timer@01c60000 {
+ compatible = "allwinner,sun7i-a20-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <0 51 1>,
+ <0 52 1>,
+ <0 53 1>,
+ <0 54 1>;
+ clocks = <&ahb1_gates 19>;
+};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index e3457b9..547004c 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -13,3 +13,4 @@ config ARCH_SUNXI
select PINCTRL_SUNXI
select SPARSE_IRQ
select SUN4I_TIMER
+ select SUN5I_HSTIMER
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 634c4d6..cd6950f 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -37,6 +37,10 @@ config SUN4I_TIMER
select CLKSRC_MMIO
bool
+config SUN5I_HSTIMER
+ select CLKSRC_MMIO
+ bool
+
config VT8500_TIMER
bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 33621ef..358358d 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
+obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
new file mode 100644
index 0000000..bddc522
--- /dev/null
+++ b/drivers/clocksource/timer-sun5i.c
@@ -0,0 +1,192 @@
+/*
+ * Allwinner SoCs hstimer driver.
+ *
+ * Copyright (C) 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_IRQ_EN_REG 0x00
+#define TIMER_IRQ_EN(val) BIT(val)
+#define TIMER_IRQ_ST_REG 0x04
+#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10)
+#define TIMER_CTL_ENABLE BIT(0)
+#define TIMER_CTL_RELOAD BIT(1)
+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
+#define TIMER_CTL_ONESHOT BIT(7)
+#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14)
+#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18)
+#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c)
+#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20)
+
+#define TIMER_SYNC_TICKS 3
+
+static void __iomem *timer_base;
+static u32 ticks_per_jiffy;
+
+/*
+ * When we disable a timer, we need to wait at least for 2 cycles of
+ * the timer source clock. We will use for that the clocksource timer
+ * that is already setup and runs at the same frequency than the other
+ * timers, and we never will be disabled.
+ */
+static void sun5i_clkevt_sync(void)
+{
+ u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1));
+
+ while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
+ cpu_relax();
+}
+
+static void sun5i_clkevt_time_stop(u8 timer)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+
+ sun5i_clkevt_sync();
+}
+
+static void sun5i_clkevt_time_setup(u8 timer, u32 delay)
+{
+ writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer));
+}
+
+static void sun5i_clkevt_time_start(u8 timer, bool periodic)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+
+ if (periodic)
+ val &= ~TIMER_CTL_ONESHOT;
+ else
+ val |= TIMER_CTL_ONESHOT;
+
+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ timer_base + TIMER_CTL_REG(timer));
+}
+
+static void sun5i_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ sun5i_clkevt_time_stop(0);
+ sun5i_clkevt_time_setup(0, ticks_per_jiffy);
+ sun5i_clkevt_time_start(0, true);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ sun5i_clkevt_time_stop(0);
+ sun5i_clkevt_time_start(0, false);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ sun5i_clkevt_time_stop(0);
+ break;
+ }
+}
+
+static int sun5i_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ sun5i_clkevt_time_stop(0);
+ sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
+ sun5i_clkevt_time_start(0, false);
+
+ return 0;
+}
+
+static struct clock_event_device sun5i_clockevent = {
+ .name = "sun5i_tick",
+ .rating = 340,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = sun5i_clkevt_mode,
+ .set_next_event = sun5i_clkevt_next_event,
+};
+
+
+static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+ writel(0x1, timer_base + TIMER_IRQ_ST_REG);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction sun5i_timer_irq = {
+ .name = "sun5i_timer0",
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = sun5i_timer_interrupt,
+ .dev_id = &sun5i_clockevent,
+};
+
+static u32 sun5i_timer_sched_read(void)
+{
+ return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1));
+}
+
+static void __init sun5i_timer_init(struct device_node *node)
+{
+ unsigned long rate;
+ struct clk *clk;
+ int ret, irq;
+ u32 val;
+
+ timer_base = of_iomap(node, 0);
+ if (!timer_base)
+ panic("Can't map registers");
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("Can't parse IRQ");
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk))
+ panic("Can't get timer clock");
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
+ writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ timer_base + TIMER_CTL_REG(1));
+
+ setup_sched_clock(sun5i_timer_sched_read, 32, rate);
+ clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name,
+ rate, 340, 32, clocksource_mmio_readl_down);
+
+ ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
+
+ ret = setup_irq(irq, &sun5i_timer_irq);
+ if (ret)
+ pr_warn("failed to setup irq %d\n", irq);
+
+ /* Enable timer0 interrupt */
+ val = readl(timer_base + TIMER_IRQ_EN_REG);
+ writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
+
+ sun5i_clockevent.cpumask = cpu_possible_mask;
+ sun5i_clockevent.irq = irq;
+
+ clockevents_config_and_register(&sun5i_clockevent, rate,
+ TIMER_SYNC_TICKS, 0xffffffff);
+}
+CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
+ sun5i_timer_init);
+CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer",
+ sun5i_timer_init);
--
1.8.5.1

48
target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch
Unescape Escape View File

@ -0,0 +1,48 @@
From 6c23e1fa6bd220b8f5665c150c83d4c016d95482 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] ARM: sun7i: a20: Add support for the High Speed Timers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Allwinner A20 has support for four high speed timers. Apart for the
number of timers (4 vs 2), it's basically the same logic than the high
speed timers found in the sun5i chips.
Now that we have a driver to support it, we can enable them in the
device tree.
[dlezcano] : Fixed conflict with 428abbb8 "Enable the I2C controllers"
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 93f7f96..c74147a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -405,6 +405,16 @@
status = "disabled";
};
+ hstimer@01c60000 {
+ compatible = "allwinner,sun7i-a20-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <0 81 1>,
+ <0 82 1>,
+ <0 83 1>,
+ <0 84 1>;
+ clocks = <&ahb_gates 28>;
+ };
+
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
--
1.8.5.1

38
target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch
Unescape Escape View File

@ -0,0 +1,38 @@
From 22a3eff19679e0e592e061201690670a2f5fdba7 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] ARM: sun5i: a13: Add support for the High Speed Timers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Allwinner A13 has support for two high speed timers. Now that we
have a driver to support it, we can enable them in the device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index ce8ef2a..1ccd75d 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -273,5 +273,12 @@
clock-frequency = <100000>;
status = "disabled";
};
+
+ timer@01c60000 {
+ compatible = "allwinner,sun5i-a13-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <82>, <83>;
+ clocks = <&ahb_gates 28>;
+ };
};
};
--
1.8.5.1

38
target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch
Unescape Escape View File

@ -0,0 +1,38 @@
From 5ace5467690055b1772dcac69dd1377735b8a34b Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Thu, 7 Nov 2013 12:01:48 +0100
Subject: [PATCH] ARM: sun5i: a10s: Add support for the High Speed Timers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Allwinner A10s has support for two high speed timers. Now that we
have a driver to support it, we can enable them in the device tree.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index b4764be..924a2c1 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -336,5 +336,12 @@
clock-frequency = <100000>;
status = "disabled";
};
+
+ timer@01c60000 {
+ compatible = "allwinner,sun5i-a13-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <82>, <83>;
+ clocks = <&ahb_gates 28>;
+ };
};
};
--
1.8.5.1

6
target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch
Unescape Escape View File

@ -23,9 +23,9 @@ index aad270c..a271a2d 100644
#address-cells = <1>;
#size-cells = <0>;
@@ -310,5 +314,22 @@
clock-frequency = <100000>;
status = "disabled";
};
interrupts = <82>, <83>;
clocks = <&ahb_gates 28>;
};
+
+ usb_rst: reset@0x01c200cc {
+ #reset-cells = <1>;

Write Preview
Loading…
Cancel
Save