ath79: Add support for TP-Link Archer C60 v1

TP-Link Archer C60v1 is a dual-band AC1350 router,
based on Qualcomm/Atheros QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Flash instruction (WebUI):
Download *-factory.bin image and upload it via the firmwary upgrade
function of the stock firmware WebUI.

Flash instruction (TFTP):
1. Set PC to fixed ip address 192.168.0.66
2. Download *-factory.bin image and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:
1. tftp 0x81000000 ...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 6d313da6dc)
v19.07.3_mercusys_ac12_duma
Adrian Schmutzler 5 years ago
parent a2d9de21b8
commit 70233e3afe

@ -137,7 +137,8 @@ tplink,tl-wr842n-v3)
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1)
tplink,archer-c59-v1|\
tplink,archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
;;

@ -205,6 +205,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
tplink,archer-c60-v1)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
tplink,archer-d50-v1)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"

@ -200,6 +200,7 @@ case "$FIRMWARE" in
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
tplink,archer-c60-v1|\
tplink,archer-c6-v2)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)

@ -0,0 +1,56 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qca9561_tplink_archer-c6x.dtsi"
/ {
compatible = "tplink,archer-c60-v1", "qca,qca9561";
model = "TP-Link Archer C60 v1";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
mac: partition@10000 {
label = "mac";
reg = <0x010000 0x010000>;
read-only;
};
partition@20000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x020000 0x7c0000>;
};
partition@7e0000 {
label = "tplink";
reg = <0x7e0000 0x010000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};

@ -0,0 +1,108 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
wifi_button {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
reset_button {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "tp-link:green:power";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan_green {
label = "tp-link:green:wan";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
wan_amber {
label = "tp-link:amber:wan";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
lan {
label = "tp-link:green:lan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wps {
label = "tp-link:green:wps";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
};
&uart {
status = "okay";
};
&pcie {
status = "okay";
};
&eth0 {
status = "okay";
phy-mode = "mii";
phy-handle = <&swphy4>;
mtd-mac-address = <&mac 0x8>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&mac 0x8>;
mtd-mac-address-increment = <1>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&mac 0x8>;
};

@ -55,6 +55,17 @@ define Device/tplink_archer-c59-v1
endef
TARGET_DEVICES += tplink_archer-c59-v1
define Device/tplink_archer-c60-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 7936k
DEVICE_TITLE := TP-Link Archer C60 v1
TPLINK_BOARD_ID := ARCHER-C60-V1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c60-v1
endef
TARGET_DEVICES += tplink_archer-c60-v1
define Device/tplink_archer-c6-v2
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563

Loading…
Cancel
Save