diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in index bd1faff02e..cb642f7e15 100644 --- a/openwrt/target/linux/Config.in +++ b/openwrt/target/linux/Config.in @@ -6,6 +6,7 @@ config BR2_LINUX_2_4 config BR2_LINUX_2_4_BRCM bool "Support for Broadcom based routers" default y + depends BR2_mipsel help Build firmware images for Broadcom based routers (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G) @@ -32,9 +33,29 @@ config BR2_LINUX_2_4_BRCM config BR2_LINUX_2_4_AR7 bool "Support for TI AR7 based devices" default n + depends BR2_mipsel help Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2) +config BR2_LINUX_2_4_SOEKRIS + bool "Support for Soekris boards" + default n + depends BR2_i386 + help + Build firmware images for Soekris based boards + (e.g. net4521, net4801) + + config BR2_TARGET_NET4521 + default y + depends BR2_LINUX_2_4_SOEKRIS + bool "Soekris net4521" + + config BR2_TARGET_NET4801 + default y + depends BR2_LINUX_2_4_SOEKRIS + bool "Soekris net4801" + + comment "Kernel Modules" config BR2_PACKAGE_KMOD_SANGAM_ATM @@ -293,4 +314,21 @@ config BR2_PACKAGE_KMOD_SCHED help Kernel schedulers for IP traffic + +config BR2_PACKAGE_KMOD_NATSEMI + tristate "Soekris net4801 ethernet driver" + default y + depends BR2_LINUX_2_4_SOEKRIS + help + Driver for the National Semiconductor DP8381x series PCI Ethernet + found on Soekris net4801 boards + +config BR2_PACKAGE_KMOD_WD1100 + tristate "Soekris net4801 watchdog" + default y + depends BR2_LINUX_2_4_SOEKRIS + help + Driver for the NatSemi SC1x00 series Watchdog + found on Soekris net4801 boards + source "target/linux/package/Config.in" diff --git a/openwrt/target/linux/Makefile b/openwrt/target/linux/Makefile index e1ffc79fbd..3bbe3cdab0 100644 --- a/openwrt/target/linux/Makefile +++ b/openwrt/target/linux/Makefile @@ -41,3 +41,4 @@ clean: $(eval $(call kernel_template,2.4,brcm,2_4_BRCM)) $(eval $(call kernel_template,2.4,ar7,2_4_AR7)) +$(eval $(call kernel_template,2.4,soekris,2_4_SOEKRIS)) diff --git a/openwrt/target/linux/control/kmod-natsemi.control b/openwrt/target/linux/control/kmod-natsemi.control new file mode 100644 index 0000000000..70af8ce8ab --- /dev/null +++ b/openwrt/target/linux/control/kmod-natsemi.control @@ -0,0 +1,6 @@ +Package: kmod-natsemi +Priority: optional +Section: sys +Maintainer: OpenWrt Developers Team +Source: http://openwrt.org/cgi-bin/viewcvs.cgi/openwrt/target/linux/ +Description: National Semiconductor DP8381x series PCI Ethernet kernel support diff --git a/openwrt/target/linux/control/kmod-wd1100.control b/openwrt/target/linux/control/kmod-wd1100.control new file mode 100644 index 0000000000..d81924e8a8 --- /dev/null +++ b/openwrt/target/linux/control/kmod-wd1100.control @@ -0,0 +1,6 @@ +Package: kmod-wd1100 +Priority: optional +Section: sys +Maintainer: OpenWrt Developers Team +Source: http://openwrt.org/cgi-bin/viewcvs.cgi/openwrt/target/linux/ +Description: NatSemi SC1x00 series Watchdog kernel support diff --git a/openwrt/target/linux/image/Makefile b/openwrt/target/linux/image/Makefile index 73e67a3d1c..6509952fac 100644 --- a/openwrt/target/linux/image/Makefile +++ b/openwrt/target/linux/image/Makefile @@ -14,6 +14,10 @@ ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_LZMA),y) include ./squashfs.mk endif +ifeq ($(BR2_TARGET_ROOTFS_TGZ),y) +include ./tgz.mk +endif + prepare: compile: install: diff --git a/openwrt/target/linux/image/soekris/Makefile b/openwrt/target/linux/image/soekris/Makefile new file mode 100644 index 0000000000..bfb2770ef3 --- /dev/null +++ b/openwrt/target/linux/image/soekris/Makefile @@ -0,0 +1,10 @@ +include $(TOPDIR)/rules.mk + +KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD) + +$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/rootfs.tar.gz + cp $^ $@ + +prepare: +compile: +install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz diff --git a/openwrt/target/linux/linux-2.4/Makefile b/openwrt/target/linux/linux-2.4/Makefile index 701423ce1b..0e4658c2e2 100644 --- a/openwrt/target/linux/linux-2.4/Makefile +++ b/openwrt/target/linux/linux-2.4/Makefile @@ -55,6 +55,10 @@ ifeq ($(BOARD),brcm) include ./broadcom.mk endif +ifeq ($(BOARD),soekris) +include ./soekris.mk +endif + ifeq ($(BOARD),ar7) include ./ar7.mk endif diff --git a/openwrt/target/linux/linux-2.4/config/soekris b/openwrt/target/linux/linux-2.4/config/soekris new file mode 100644 index 0000000000..62ea34eb1a --- /dev/null +++ b/openwrt/target/linux/linux-2.4/config/soekris @@ -0,0 +1,1116 @@ +# +# Automatically generated by make menuconfig: don't edit +# +CONFIG_X86=y +# CONFIG_SBUS is not set +CONFIG_UID16=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODVERSIONS is not set +# CONFIG_KMOD is not set + +# +# Processor type and features +# +# CONFIG_M386 is not set +CONFIG_M486=y +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MELAN is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODE is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_XADD=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_X86_L1_CACHE_SHIFT=4 +CONFIG_X86_USE_STRING_486=y +CONFIG_X86_ALIGNMENT_16=y +CONFIG_X86_PPRO_FENCE=y +# CONFIG_X86_F00F_WORKS_OK is not set +CONFIG_X86_MCE=y +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set +# CONFIG_EDD is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +# CONFIG_HIGHMEM is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_MTRR is not set +# CONFIG_SMP is not set +# CONFIG_X86_UP_APIC is not set +# CONFIG_X86_UP_IOAPIC is not set +# CONFIG_X86_TSC_DISABLE is not set + +# +# General setup +# +CONFIG_NET=y +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +CONFIG_ISA=y +# CONFIG_PCI_NAMES is not set +# CONFIG_EISA is not set +# CONFIG_MCA is not set +CONFIG_HOTPLUG=y + +# +# PCMCIA/CardBus support +# +CONFIG_PCMCIA=m +CONFIG_CARDBUS=y +# CONFIG_TCIC is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_COMPAQ is not set +# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set +# CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY is not set +# CONFIG_HOTPLUG_PCI_PCIE is not set +# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_KCORE_ELF=y +# CONFIG_KCORE_AOUT is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_ELF_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_OOM_KILLER is not set +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# ACPI Support +# +# CONFIG_ACPI is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play configuration +# +CONFIG_PNP=m +CONFIG_ISAPNP=m + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_CISS_SCSI_TAPE is not set +# CONFIG_CISS_MONITOR_THREAD is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_STATS is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set +# CONFIG_BLK_DEV_MD is not set +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_BLK_DEV_LVM is not set + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_NETLINK_DEV=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_FILTER is not set +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_FWMARK=y +CONFIG_IP_ROUTE_NAT=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_TOS=y +# CONFIG_IP_ROUTE_VERBOSE is not set +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_INET_ECN is not set +# CONFIG_SYN_COOKIES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +CONFIG_IP_NF_FTP=y +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_IRC=y +CONFIG_IP_NF_CT_PROTO_GRE=m +CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=y +CONFIG_IP_NF_MATCH_MULTIPORT=y +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_IPP2P=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=y +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=y +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_UNCLEAN=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_LAYER7=m +# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set +CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048 +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_MIRROR=m +CONFIG_IP_NF_NAT=y +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_PROTO_GRE=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=y +CONFIG_IP_NF_NAT_FTP=y +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=y +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_AHESP is not set +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_MARK=m +# CONFIG_KHTTPD is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_VLAN_8021Q=y +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_DECNET is not set +CONFIG_BRIDGE=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_LLC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +# CONFIG_NET_FASTROUTE is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_CSZ=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_POLICE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_IPSEC_NAT_TRAVERSAL=y + +# +# Telephony Support +# +# CONFIG_PHONE is not set +# CONFIG_PHONE_IXJ is not set +# CONFIG_PHONE_IXJ_PCMCIA is not set + +# +# ATA/IDE/MFM/RLL support +# +CONFIG_IDE=y + +# +# IDE, ATA and ATAPI Block devices +# +CONFIG_BLK_DEV_IDE=y +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_IDEDISK_STROKE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_ISAPNP is not set +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_BLK_DEV_GENERIC is not set +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +CONFIG_BLK_DEV_OFFBOARD=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_PCI_WIP is not set +# CONFIG_BLK_DEV_ADMA100 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_WDC_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_AMD74XX_OVERRIDE is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_HPT34X_AUTODMA is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_PDC202XX_BURST is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_SC1200=y +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_IDEDMA_AUTO=y +CONFIG_IDEDMA_IVB=y +# CONFIG_DMA_NONPCI is not set +# CONFIG_BLK_DEV_ATARAID is not set +# CONFIG_BLK_DEV_ATARAID_PDC is not set +# CONFIG_BLK_DEV_ATARAID_HPT is not set +# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set +# CONFIG_BLK_DEV_ATARAID_SII is not set + +# +# SCSI support +# +CONFIG_SCSI=m +CONFIG_BLK_DEV_SD=m +CONFIG_SD_EXTRA_DEVS=5 +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_SCSI_DEBUG_QUEUES is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AHA1740 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_MEGARAID2 is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_DMA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_NCR53C7xx is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_NCR53C8XX is not set +# CONFIG_SCSI_SYM53C8XX is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_SEAGATE is not set +# CONFIG_SCSI_SIM710 is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_ULTRASTOR is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_SCSI_PCMCIA is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_BOOT is not set +# CONFIG_FUSION_ISENSE is not set +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LAN is not set + +# +# IEEE 1394 (FireWire) support (EXPERIMENTAL) +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_I2O_PCI is not set +# CONFIG_I2O_BLOCK is not set +# CONFIG_I2O_LAN is not set +# CONFIG_I2O_SCSI is not set +# CONFIG_I2O_PROC is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +CONFIG_NET_RANDOM=y +# CONFIG_ETHERTAP is not set +# CONFIG_NET_SB1000 is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_SUNLANCE is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNBMAC is not set +# CONFIG_SUNQE is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_CS89x0 is not set +# CONFIG_TULIP is not set +# CONFIG_DE4X5 is not set +# CONFIG_DGRS is not set +# CONFIG_DM9102 is not set +# CONFIG_EEPRO100 is not set +# CONFIG_EEPRO100_PIO is not set +# CONFIG_E100 is not set +# CONFIG_LNE390 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=m +# CONFIG_NE2K_PCI is not set +# CONFIG_FORCEDETH is not set +# CONFIG_NE3210 is not set +# CONFIG_ES3210 is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_SUNDANCE_MMIO is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_RHINE_MMIO is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_MYRI_SBUS is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE_MPPC=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +# CONFIG_STRIP is not set +# CONFIG_WAVELAN is not set +# CONFIG_ARLAN is not set +# CONFIG_AIRONET4500 is not set +# CONFIG_AIRONET4500_NONCS is not set +# CONFIG_AIRONET4500_PROC is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_PCMCIA_HERMES is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_ATMEL is not set +# CONFIG_PRISM54 is not set +CONFIG_NET_WIRELESS=y + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_NET_FC is not set +# CONFIG_RCPCI is not set +CONFIG_SHAPER=m + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_ARCNET_COM20020_CS is not set +# CONFIG_PCMCIA_IBMTR is not set +# CONFIG_PCMCIA_XIRCOM is not set +# CONFIG_PCMCIA_XIRTULIP is not set +# CONFIG_NET_PCMCIA_RADIO is not set + +# +# Amateur Radio support +# +# CONFIG_HAMRADIO is not set + +# +# IrDA (infrared) support +# +# CONFIG_IRDA is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Input core support +# +# CONFIG_INPUT is not set +# CONFIG_INPUT_KEYBDEV is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_UINPUT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_SERIAL=y +CONFIG_SERIAL_CONSOLE=y +# CONFIG_SERIAL_EXTENDED is not set +# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_UNIX98_PTYS=y +CONFIG_UNIX98_PTY_COUNT=128 + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Mice +# +# CONFIG_BUSMOUSE is not set +# CONFIG_MOUSE is not set + +# +# Joysticks +# +# CONFIG_INPUT_GAMEPORT is not set +# CONFIG_QIC02_TAPE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_IPMI_PANIC_EVENT is not set +# CONFIG_IPMI_DEVICE_INTERFACE is not set +# CONFIG_IPMI_KCS is not set +# CONFIG_IPMI_WATCHDOG is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_PCWATCHDOG is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I810_TCO is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_60XX_WDT is not set +CONFIG_SC1200_WDT=m +CONFIG_SCx200_WDT=m +CONFIG_SOFT_WATCHDOG=y +# CONFIG_W83877F_WDT is not set +# CONFIG_WDT is not set +# CONFIG_WDTPCI is not set +# CONFIG_MACHZ_WDT is not set +CONFIG_WD1100=m +CONFIG_SCx200=m +CONFIG_SCx200_GPIO=m +# CONFIG_AMD_RNG is not set +# CONFIG_INTEL_RNG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_AMD_PM768 is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set + +# +# Direct Rendering Manager (XFree86 DRI support) +# +# CONFIG_DRM is not set +# CONFIG_MWAVE is not set + +# +# PCMCIA character devices +# +# CONFIG_PCMCIA_SERIAL_CS is not set +# CONFIG_SYNCLINK_CS is not set +# CONFIG_MWAVE is not set +# CONFIG_OBMOUSE is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# File systems +# +# CONFIG_QUOTA is not set +# CONFIG_QFMT_V2 is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADFS_FS_RW is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BEFS_DEBUG is not set +# CONFIG_BFS_FS is not set +CONFIG_EXT3_FS=m +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +# CONFIG_UMSDOS_FS is not set +CONFIG_VFAT_FS=m +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_JFFS2_BBC_ARMLIB is not set +# CONFIG_JFFS2_BBC_LZO is not set +# CONFIG_JFFS2_BBC_LZARI is not set +# CONFIG_JFFS2_BBC_LZHD is not set +# CONFIG_JFFS2_BBC_LZSS is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_TMPFS=y +CONFIG_RAMFS=y +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_HPFS_FS is not set +CONFIG_PROC_FS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVPTS_FS=y +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX4FS_RW is not set +# CONFIG_ROMFS_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UDF_FS is not set +# CONFIG_UDF_RW is not set +# CONFIG_UFS_FS is not set +# CONFIG_UFS_FS_WRITE is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_TRACE is not set +# CONFIG_XFS_DEBUG is not set + +# +# Network File Systems +# +# CONFIG_CODA_FS is not set +# CONFIG_INTERMEZZO_FS is not set +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_ROOT_NFS is not set +# CONFIG_NFSD is not set +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_SUNRPC=m +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_POSIX=y +# CONFIG_SMB_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_ZISOFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SMB_NLS is not set +CONFIG_NLS=y + +# +# Native Language Support +# +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_UHCI is not set +CONFIG_USB_UHCI_ALT=m +CONFIG_USB_OHCI=m +# CONFIG_USB_SL811HS_ALT is not set +# CONFIG_USB_SL811HS is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_MIDI is not set +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_HP8200e=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +# CONFIG_USB_HID is not set +# CONFIG_USB_HIDINPUT is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_DC2XX is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_SCANNER is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_HPUSBSCSI is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_CDCETHER is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_TIGL is not set +# CONFIG_USB_BRLVGER is not set +# CONFIG_USB_LCD is not set + +# +# Support for USB gadgets +# +# CONFIG_USB_GADGET is not set + +# +# Bluetooth support +# +CONFIG_BLUEZ=m +CONFIG_BLUEZ_L2CAP=m +CONFIG_BLUEZ_SCO=m +CONFIG_BLUEZ_RFCOMM=m +CONFIG_BLUEZ_RFCOMM_TTY=y +CONFIG_BLUEZ_BNEP=m +CONFIG_BLUEZ_BNEP_MC_FILTER=y +CONFIG_BLUEZ_BNEP_PROTO_FILTER=y + +# +# Bluetooth device drivers +# +CONFIG_BLUEZ_HCIUSB=m +CONFIG_BLUEZ_HCIUSB_SCO=y +CONFIG_BLUEZ_HCIUART=m +CONFIG_BLUEZ_HCIUART_H4=y +CONFIG_BLUEZ_HCIUART_BCSP=y +CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y +# CONFIG_BLUEZ_HCIBFUSB is not set +# CONFIG_BLUEZ_HCIDTL1 is not set +# CONFIG_BLUEZ_HCIBT3C is not set +# CONFIG_BLUEZ_HCIBLUECARD is not set +# CONFIG_BLUEZ_HCIBTUART is not set +# CONFIG_BLUEZ_HCIVHCI is not set + +# +# Kernel hacking +# +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=0 + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Library routines +# +# CONFIG_CRC32 is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_FW_LOADER is not set diff --git a/openwrt/target/linux/linux-2.4/config/soekris.modules b/openwrt/target/linux/linux-2.4/config/soekris.modules new file mode 100644 index 0000000000..ff58681ad5 --- /dev/null +++ b/openwrt/target/linux/linux-2.4/config/soekris.modules @@ -0,0 +1,2 @@ +natsemi +wd1100 diff --git a/openwrt/target/linux/linux-2.4/patches/soekris/001-mgeode-cpu.patch b/openwrt/target/linux/linux-2.4/patches/soekris/001-mgeode-cpu.patch new file mode 100644 index 0000000000..662d4f263e --- /dev/null +++ b/openwrt/target/linux/linux-2.4/patches/soekris/001-mgeode-cpu.patch @@ -0,0 +1,40 @@ +diff -Nur linux-2.4.29/arch/i386/Makefile linux-2.4.29_geode/arch/i386/Makefile +--- linux-2.4.29/arch/i386/Makefile Wed Nov 17 12:54:21 2004 ++++ linux-2.4.29_geode/arch/i386/Makefile Tue Feb 15 23:41:54 2005 +@@ -94,6 +94,10 @@ + CFLAGS += $(call check_gcc,-march=c3-2,-march=i686) + endif + ++ifdef CONFIG_MGEODE ++CFLAGS += -march=i586 ++endif ++ + # Disable unit-at-a-time mode, it makes gcc use a lot more stack + # due to the lack of sharing of stacklots. + CFLAGS += $(call check_gcc,-fno-unit-at-a-time,) +diff -Nur linux-2.4.29/arch/i386/config.in linux-2.4.29_geode/arch/i386/config.in +--- linux-2.4.29/arch/i386/config.in Wed Nov 17 12:54:21 2004 ++++ linux-2.4.29_geode/arch/i386/config.in Tue Feb 15 23:41:54 2005 +@@ -42,6 +42,7 @@ + Winchip-C6 CONFIG_MWINCHIPC6 \ + Winchip-2 CONFIG_MWINCHIP2 \ + Winchip-2A/Winchip-3 CONFIG_MWINCHIP3D \ ++ MediaGX/Geode CONFIG_MGEODE \ + CyrixIII/VIA-C3 CONFIG_MCYRIXIII \ + VIA-C3-2 CONFIG_MVIAC3_2" Pentium-Pro + # +@@ -162,6 +163,14 @@ + define_bool CONFIG_X86_ALIGNMENT_16 y + define_bool CONFIG_X86_USE_PPRO_CHECKSUM y + define_bool CONFIG_X86_F00F_WORKS_OK y ++fi ++if [ "$CONFIG_MGEODE" = "y" ]; then ++ define_int CONFIG_X86_L1_CACHE_SHIFT 5 ++ define_bool CONFIG_X86_USE_STRING_486 y ++ define_bool CONFIG_X86_ALIGNMENT_16 y ++ define_bool CONFIG_X86_TSC y ++ define_bool CONFIG_X86_PPRO_FENCE y ++ define_bool CONFIG_X86_OOSTORE y + fi + if [ "$CONFIG_MCRUSOE" = "y" ]; then + define_int CONFIG_X86_L1_CACHE_SHIFT 5 diff --git a/openwrt/target/linux/linux-2.4/patches/soekris/002-wd1100.patch b/openwrt/target/linux/linux-2.4/patches/soekris/002-wd1100.patch new file mode 100644 index 0000000000..8cb2dbd04b --- /dev/null +++ b/openwrt/target/linux/linux-2.4/patches/soekris/002-wd1100.patch @@ -0,0 +1,417 @@ +diff -Nur linux-2.4.29/drivers/char/Config.in linux-2.4.29_geode/drivers/char/Config.in +--- linux-2.4.29/drivers/char/Config.in Sun Aug 8 01:26:04 2004 ++++ linux-2.4.29_geode/drivers/char/Config.in Tue Feb 15 23:41:54 2005 +@@ -270,6 +270,7 @@ + fi + fi + tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT ++ tristate ' Embedded NatSemi SC1x00 Watchdog' CONFIG_WD1100 + if [ "$CONFIG_SGI_IP22" = "y" ]; then + dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22 + fi +diff -Nur linux-2.4.29/drivers/char/Makefile linux-2.4.29_geode/drivers/char/Makefile +--- linux-2.4.29/drivers/char/Makefile Sun Aug 8 01:26:04 2004 ++++ linux-2.4.29_geode/drivers/char/Makefile Tue Feb 15 23:41:54 2005 +@@ -302,6 +302,7 @@ + obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o + obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o + obj-$(CONFIG_IB700_WDT) += ib700wdt.o ++obj-$(CONFIG_WD1100) += wd1100.o + obj-$(CONFIG_MIXCOMWD) += mixcomwd.o + obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o + obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o +diff -Nur linux-2.4.29/drivers/char/wd1100.c linux-2.4.29_geode/drivers/char/wd1100.c +--- linux-2.4.29/drivers/char/wd1100.c Thu Jan 1 01:00:00 1970 ++++ linux-2.4.29_geode/drivers/char/wd1100.c Tue Feb 15 23:41:54 2005 +@@ -0,0 +1,391 @@ ++/* ++ * National Semiconductor SC1x00 CPU watchdog driver ++ * Copyright (c) Inprimis Technologies 2002 ++ * ++ * by Mark Grosberg ++ * and Rolando Goldman ++ * ++ * Minor changes by Kianusch Sayah Karadji ++ * ( Soekris net4801 Support, module-parameter ) ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * Since the SC1100 is an x86 clone, we don't even bother with ++ * allowing other architectures to compile us. ++ */ ++#ifndef CONFIG_X86 ++# error Sorry this driver is only for x86. ++#endif ++ ++#include ++#include ++#include ++#include ++ ++/* #define DEBUG_WD1100 */ ++ ++static int proc_wd_timeout(ctl_table *ctl, ++ int write, ++ struct file *file, ++ void *buffer, ++ size_t *lenp); ++static int proc_wd_graceful(ctl_table *ctl, ++ int write, ++ struct file *file, ++ void *buffer, ++ size_t *lenp); ++ ++/* Register definitions */ ++ ++#define SC1100_F5_VENDOR_ID 0x100B ++#define SC1100_F5_DEVICE_ID 0x0515 ++ ++#define CPU_WDTO_REG 0x00 /* watchdog time out, 16 bit register */ ++#define CPU_WDCNFG_REG 0x02 /* watchdog config , 16 bit register */ ++#define CPU_WDSTS_REG 0x04 /* watchdog status , 8 bit register */ ++ ++/* Default timeout: 4 seconds (changeable via sysctl) */ ++static unsigned int sysctl_wd_timeout = 0; ++static unsigned int sysctl_wd_graceful = 0; ++ ++static unsigned int timeout = 4; ++static unsigned int graceful = 1; ++ ++MODULE_PARM (timeout, "i"); ++MODULE_PARM (graceful, "i"); ++ ++static int in_use = 0; ++static unsigned short cpu_base; ++static spinlock_t wd_lock; ++ ++/**************************************************************************/ ++ ++/* XXX To-do: DEV_WATCHDOG must be in include/linux/sysctl.h */ ++enum ++{ DEV_WATCHDOG = 6 }; ++ ++enum ++{ ++ DEV_WD_TIMEOUT = 1, ++ DEV_WD_GRACEFUL = 2 ++}; ++ ++static struct ctl_table_header *wd_table_header; ++ ++static ctl_table wd_table[] = { ++ { ++ DEV_WD_TIMEOUT, "timeout", ++ &sysctl_wd_timeout, sizeof(int), 0644, NULL, &proc_wd_timeout ++ }, ++ ++ { ++ DEV_WD_GRACEFUL, "graceful", ++ &sysctl_wd_graceful, sizeof(int), 0644, NULL, &proc_wd_graceful ++ }, ++ ++ {0} ++}; ++ ++static ctl_table wd_dir_table[] = { ++ {DEV_WATCHDOG, "wd", NULL, 0, 0555, wd_table}, ++ {0} ++}; ++ ++static ctl_table wd_root_table[] = { ++ {CTL_DEV, "dev", NULL, 0, 0555, wd_dir_table}, ++ {0} ++}; ++ ++static int proc_wd_timeout(ctl_table *ctl, ++ int write, ++ struct file *file, ++ void *buffer, ++ size_t *lenp) ++{ ++ int rc; ++ ++ rc = proc_dointvec(ctl, write, file, buffer, lenp); ++ if (write && (rc == 0)) ++ { ++ /* Clamp to limits. */ ++ if (sysctl_wd_timeout < 1) ++ sysctl_wd_timeout = 1; ++ else if (sysctl_wd_timeout > 65535) ++ sysctl_wd_timeout = 65535; ++ } ++ ++ return (rc); ++} ++ ++static int proc_wd_graceful(ctl_table *ctl, ++ int write, ++ struct file *file, ++ void *buffer, ++ size_t *lenp) ++{ ++ int rc; ++ ++ rc = proc_dointvec(ctl, write, file, buffer, lenp); ++ if (write && (rc == 0)) ++ { ++ /* Clamp to true/false. */ ++ if (sysctl_wd_graceful) ++ sysctl_wd_graceful = 1; ++ } ++ ++ return (rc); ++} ++ ++/**************************************************************************/ ++ ++static __inline__ void reset_wd(void) ++{ ++ outw(sysctl_wd_timeout * 8, cpu_base + CPU_WDTO_REG); ++} ++ ++static int reboot_reason(void) ++{ ++ static int result; ++ static int fetched = 0; ++ ++ if (!fetched) ++ { ++ unsigned char sr; ++ ++ sr = inb(cpu_base + CPU_WDSTS_REG); ++ outb(sr | 1, cpu_base + CPU_WDSTS_REG); ++ ++ fetched = 1; ++ } ++ ++ return (result); ++} ++ ++static struct watchdog_info wd_info = ++{ ++ 0, /* Options */ ++ 0, /* Firmware version */ ++ "NSC SC1x00 WD" ++}; ++ ++static int wd_ioctl(struct inode *inode, ++ struct file *file, ++ unsigned int cmd, ++ unsigned long arg) ++{ ++ int i; ++ ++ switch (cmd) ++ { ++ default: ++ return (-ENOTTY); ++ ++ case WDIOC_GETSUPPORT: ++ i = verify_area(VERIFY_WRITE, (void *)arg, sizeof(struct watchdog_info)); ++ if (i) ++ return (i); ++ else ++ return copy_to_user((struct watchdog_info *)arg, ++ &wd_info, ++ sizeof(wd_info)); ++ break; ++ ++ case WDIOC_KEEPALIVE: ++ reset_wd(); ++ return (0); ++ ++ case WDIOC_GETBOOTSTATUS: ++ i = reboot_reason(); ++ return (put_user(i, (int *)arg)); ++ ++ case WDIOC_GETSTATUS: ++ i = inw(cpu_base + CPU_WDTO_REG) / 8; ++ return (put_user(i, (int *)arg)); ++ } ++} ++ ++static int wd_open(struct inode *inode, ++ struct file *file) ++{ ++ spin_lock(&wd_lock); ++ if (in_use) ++ { ++ spin_unlock(&wd_lock); ++ return (-EBUSY); ++ } ++ else ++ in_use++; ++ ++ spin_unlock(&wd_lock); ++ ++ MOD_INC_USE_COUNT; ++ ++ /* ++ * Configure the chip to do a reset if the timer goes to 0. ++ * Set the clock divisor to 4096. ++ */ ++ ++ outw(0xfc, cpu_base + CPU_WDCNFG_REG); ++ ++ /* Start the watchdog: It won't run until we write the TO reg. */ ++ reset_wd(); ++ ++ return (0); ++} ++ ++static int wd_release(struct inode *inode, ++ struct file *file) ++{ ++ spin_lock(&wd_lock); ++ ++ in_use = 0; ++ ++ /* ++ * If graceful shutdown is not set, then don't bother to stop the ++ * watchdog timer. This handles the scenario where the user process ++ * that is poking the watchdog gets terminated due to some error ++ * (say a SEGV or some VM condition). ++ * ++ * In that case, the kernel would happily close the descriptor for ++ * us and leave us in a state where we aren't watching the dog... ++ * ++ * To work around this, the "graceful" sysctl prevents reset of the ++ * watchdog on close. ++ */ ++ if (sysctl_wd_graceful) ++ outw(0, cpu_base + CPU_WDCNFG_REG); ++ ++ spin_unlock(&wd_lock); ++ MOD_DEC_USE_COUNT; ++ ++ return (0); ++} ++ ++static ssize_t wd_write(struct file *file, ++ const char *data, ++ size_t len, ++ loff_t *ppos) ++{ ++ /* Device is non-seekable. */ ++ if (ppos != &file->f_pos) ++ return (-ESPIPE); ++ ++ if (len > 0) ++ reset_wd(); ++ ++ return (len); ++} ++ ++static struct file_operations wd_fops= ++{ ++ owner: THIS_MODULE, ++ write: wd_write, ++ ioctl: wd_ioctl, ++ open: wd_open, ++ release: wd_release, ++}; ++ ++static struct miscdevice sc1x00wd_miscdev= ++{ ++ WATCHDOG_MINOR, ++ "watchdog", ++ &wd_fops ++}; ++ ++static int __init wd_init(void) ++{ ++ int ret; ++ struct pci_dev *dev; ++ unsigned int cw; ++ ++ if (timeout < 1) ++ timeout = 1; ++ else if (timeout > 65535) ++ timeout = 65535; ++ ++ if (graceful != 0) ++ graceful = 1; ++ ++ sysctl_wd_timeout=timeout; ++ sysctl_wd_graceful=graceful; ++ ++ if ((strcmp(boot_cpu_data.x86_vendor_id, "Geode by NSC") != 0) ++ || ((boot_cpu_data.x86_model != 4) && boot_cpu_data.x86_model != 9)) ++ { ++ printk(KERN_WARNING "wd1100.c: This is not an SC1100 processor!\n"); ++ return (0); ++ } ++ ++ /* get the CONFIG BLOCK ADDRESS from scratch pad register */ ++ dev = pci_find_device(SC1100_F5_VENDOR_ID,SC1100_F5_DEVICE_ID,0); ++ if (dev == NULL) ++ { ++ printk(KERN_ERR "wd1100.c: Can not find bridge device.\n"); ++ return (0); ++ } ++ ++ pci_read_config_dword(dev, 0x64, &cw); ++ cpu_base = (unsigned short )cw; ++ ++#ifdef DEBUG_WD1100 ++ printk("wd1100.c: CPU base = 0x%X\n", (unsigned int )cpu_base); ++#endif ++ ++ printk(KERN_INFO "SC1x00 Watchdog driver by Inprimis Technolgies.\n"); ++ /* ++ * We must call reboot_reason() to reset the flag in the WD. ++ * ++ * Even though it is available as an ioctl(), we call it during ++ * module initialization to perform the clear. You can take out ++ * the printk(), but don't take out the call to reboot_reason(). ++ */ ++ if (reboot_reason()) ++ printk(KERN_INFO "Last reboot was by watchdog!\n"); ++ ++ spin_lock_init(&wd_lock); ++ ++ ret = misc_register(&sc1x00wd_miscdev); ++ if (ret) ++ printk(KERN_ERR "wd1100.c: Can't register device.\n"); ++ else ++ { ++ wd_table_header = register_sysctl_table(wd_root_table, 1); ++ if (wd_table_header == NULL) ++ printk(KERN_ERR "wd1100.c: Can't register sysctl.\n"); ++ } ++ ++ return 0; ++} ++ ++static void __exit wd_exit(void) ++{ ++ if (wd_table_header != NULL) ++ unregister_sysctl_table(wd_table_header); ++ ++ misc_deregister(&sc1x00wd_miscdev); ++} ++ ++EXPORT_NO_SYMBOLS; ++ ++module_init(wd_init); ++module_exit(wd_exit); ++ ++MODULE_LICENSE("GPL"); ++ diff --git a/openwrt/target/linux/linux-2.4/patches/soekris/003-mgeode-pci.patch b/openwrt/target/linux/linux-2.4/patches/soekris/003-mgeode-pci.patch new file mode 100644 index 0000000000..eb6594ec84 --- /dev/null +++ b/openwrt/target/linux/linux-2.4/patches/soekris/003-mgeode-pci.patch @@ -0,0 +1,14 @@ +diff -Nur linux-2.4.29/drivers/pci/pci.c linux-2.4.29_geode/drivers/pci/pci.c +--- linux-2.4.29/drivers/pci/pci.c Wed Nov 17 12:54:21 2004 ++++ linux-2.4.29_geode/drivers/pci/pci.c Tue Feb 15 23:41:54 2005 +@@ -1486,6 +1486,10 @@ + for (func = 0; func < 8; func++, temp->devfn++) { + if (pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) + continue; ++#ifdef CONFIG_MGEODE ++ if (hdr_type & 0x7f > PCI_HEADER_TYPE_CARDBUS) ++ continue; ++#endif + temp->hdr_type = hdr_type & 0x7f; + + dev = pci_scan_device(temp); diff --git a/openwrt/target/linux/linux-2.4/soekris.mk b/openwrt/target/linux/linux-2.4/soekris.mk new file mode 100644 index 0000000000..4fa8fff8cf --- /dev/null +++ b/openwrt/target/linux/linux-2.4/soekris.mk @@ -0,0 +1,11 @@ +# $Id$ + +# soekris specific kmod packages + +$(eval $(call KMOD_template,NATSEMI,natsemi,\ + $(MODULES_DIR)/kernel/drivers/net/natsemi.o \ +,CONFIG_NATSEMI)) +$(eval $(call KMOD_template,WD1100,wd1100,\ + $(MODULES_DIR)/kernel/drivers/char/wd1100.o \ +,CONFIG_WD1100)) + diff --git a/openwrt/target/linux/package/openwrt/files/network.overrides.soekris b/openwrt/target/linux/package/openwrt/files/network.overrides.soekris new file mode 100644 index 0000000000..e857d5b5f1 --- /dev/null +++ b/openwrt/target/linux/package/openwrt/files/network.overrides.soekris @@ -0,0 +1,26 @@ +# NVRAM overrides +# +# This file handles the NVRAM quirks of various hardware. +# THIS FILE IS NOT A REPLACEMENT FOR NVRAM + +# Load sysconf defaults +[ -f /etc/sysconf ] && . /etc/sysconf + +DEFAULT_lan_proto="static" +DEFAULT_lan_ifname="br0" +DEFAULT_lan_ifnames="eth0" +DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"} +DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"} +DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"} + +# failsafe if reset is held +[ "$FAILSAFE" = "true" ] && { + echo "### YOU ARE IN FAILSAFE MODE ####" + lan_ifname=${DEFAULT_lan_proto} + lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}} + lan_ipaddr=$DEFAULT_lan_ipaddr + lan_netmask=$DEFAULT_lan_netmask + lan_hwaddr=$DEFAULT_lan_hwaddr + wan_ifname="none" + wifi_ifname="none" +}