ath79: add support for TP-Link TL-WA850RE v1

This ports support for the TL-WA850RE v1 range extender from ar71xx
to ath79.

Specifications:
  Board: AP123 / AR9341 rev. 3
  Flash/RAM: 4/32 MiB
  CPU: 535 MHz
  WiFi: 2.4 GHz b/g/n
  Ethernet: 1 port (100M)

Flashing instructions:
Upload the factory image via the vendor firmware upgrade option.

Recovery:
Note that this device does not provide TFTP via ethernet like many
other TP-Link devices do. You will have to open the case if you
require recovery beyond failsafe.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
master
Adrian Schmutzler 4 years ago
parent 3d6c571083
commit 6eaea3a8ba

@ -0,0 +1,82 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
aliases {
serial0 = &uart;
label-mac-device = &wmac;
};
};
&ref {
clock-frequency = <25000000>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

@ -0,0 +1,79 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9341_tplink_tl-wa.dtsi"
/ {
model = "TP-Link TL-WA850RE v1";
compatible = "tplink,tl-wa850re-v1", "qca,ar9341";
aliases {
led-boot = &led_re;
led-failsafe = &led_re;
led-running = &led_re;
led-upgrade = &led_re;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
lan {
label = "tp-link:blue:lan";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
wlan {
label = "tp-link:blue:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_re: re {
label = "tp-link:blue:re";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
signal1 {
label = "tp-link:blue:signal1";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
signal2 {
label = "tp-link:blue:signal2";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
signal3 {
label = "tp-link:blue:signal3";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
signal4 {
label = "tp-link:blue:signal4";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
signal5 {
label = "tp-link:blue:signal5";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
};

@ -66,6 +66,17 @@ define Device/tplink_tl-mr3420-v2
endef
TARGET_DEVICES += tplink_tl-mr3420-v2
define Device/tplink_tl-wa850re-v1
$(Device/tplink-4mlzma)
SOC := ar9341
DEVICE_MODEL := TL-WA850RE
DEVICE_VARIANT := v1
TPLINK_HWID := 0x08500001
DEVICE_PACKAGES := rssileds
SUPPORTED_DEVICES += tl-wa850re
endef
TARGET_DEVICES += tplink_tl-wa850re-v1
define Device/tplink_tl-wa901nd-v2
$(Device/tplink-4m)
SOC := ar9132

@ -54,6 +54,15 @@ tplink,tl-wr841-v8)
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tplink,tl-wa850re-v1)
ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:blue:signal1" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:blue:signal2" "wlan0" "20" "100"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:blue:signal3" "wlan0" "40" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:blue:signal4" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:blue:signal5" "wlan0" "80" "100"
;;
tplink,tl-wr740n-v1|\
tplink,tl-wr740n-v3|\
tplink,tl-wr741-v1|\

@ -32,6 +32,7 @@ ath79_setup_interfaces()
tplink,tl-mr10u|\
tplink,tl-mr3020-v1|\
tplink,tl-mr3040-v2|\
tplink,tl-wa850re-v1|\
tplink,tl-wa901nd-v2|\
tplink,tl-wr703n)
ucidef_set_interface_lan "eth0"

Loading…
Cancel
Save