ramips: add asiarf awapn2403 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41177

target/linux/ramips/base-files/etc/diag.sh

@@ -15,6 +15,9 @@ get_status_led() {
 	ar725w)
 		status_led="ar725w:green:power"
 		;;
+	awapn2403)
+		status_led="asiarf:green:wps"
+		;;
 	argus-atp52b)
 		status_led="argus-atp52b:green:run"
 		;;

target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom

@@ -64,6 +64,7 @@ case "$FIRMWARE" in
 	all5003 | \
 	argus-atp52b | \
 	awm002-evb | \
+	awapn2403 | \
 	bc2 | \
 	br6425 | \
 	br-6475nd | \

target/linux/ramips/base-files/etc/uci-defaults/01_leds

@@ -35,6 +35,9 @@ case $board in
 		ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
+	awapn2403)
+		set_wifi_led "rt2800soc-phy0::radio"
+		;;
 	ar725w)
 		set_wifi_led "rt2800soc-phy0::radio"
 		;;

target/linux/ramips/base-files/etc/uci-defaults/02_network

@@ -64,6 +64,13 @@ ramips_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		;;
 
+	awapn2403)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 6t"
+		ucidef_add_switch_vlan "switch0" "2" "1 6t"
+		;;
+
 	br-6475nd)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"

target/linux/ramips/base-files/lib/ramips.sh

@@ -55,6 +55,9 @@ ramips_board_detect() {
 	*"AsiaRF AWM002 EVB")
 		name="awm002-evb"
 		;;
+	*"AsiaRF AWAPN2403")
+		name="awapn2403"
+		;;
 	*"BR6524N")
 		name="br6524n"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -26,6 +26,7 @@ platform_check_image() {
 	ar725w | \
 	asl26555 | \
 	awm002-evb | \
+	awapn2403 | \
 	bc2 | \
 	broadway | \
 	carambola | \

target/linux/ramips/dts/AWAPN2403.dts

@@ -0,0 +1,78 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	compatible = "AWAPN2403", "ralink,rt3052-soc";
+	model =  "AsiaRF AWAPN2403";
+
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l3205d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l3205d";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x3e>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		link {
+			label = "asiarf:green:wps";
+			gpios = <&gpio0 14 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+	};
+};

target/linux/ramips/image/Makefile

@@ -348,6 +348,7 @@ endef
 Image/Build/Profile/ASL26555=$(call BuildFirmware/ASL26555/$(1),$(1),asl26555,ASL26555)
 
 Image/Build/Profile/AWM002EVB=$(call BuildFirmware/DefaultDualSize/$(1),$(1),awm002-evb,AWM002-EVB)
+Image/Build/Profile/AWAPN2403=$(call BuildFirmware/Default4M/$(1),$(1),awmapn2403,AWAPN2403)
 
 Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2)
 
@@ -562,6 +563,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
 	$(call Image/Build/Profile/ASL26555,$(1))
 	$(call Image/Build/Profile/AWM002EVB,$(1))
+	$(call Image/Build/Profile/AWAPN2403,$(1))
 	$(call Image/Build/Profile/BC2,$(1))
 	$(call Image/Build/Profile/BROADWAY,$(1))
 	$(call Image/Build/Profile/CARAMBOLA,$(1))

target/linux/ramips/rt305x/profiles/asiarf.mk

@@ -1,18 +1,16 @@
 #
-# Copyright (C) 2012 OpenWrt.org
+# Copyright (C) 2014 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
-define Profile/AWM002EVB
-	NAME:=AsiaRF AWM002-EVB
-	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
-	kmod-i2c-core kmod-i2c-gpio
+define Profile/AWAPN2403
+	NAME:=AisaRF AWAPN2403
 endef
 
-define Profile/AWM002EVB/Description
-	Package set for AsiaRF AWM002 Evaluation Board
+define Profile/AWAPN2403/Description
+	Package set for Allnet ALL0239-3G
 endef
 
-$(eval $(call Profile,AWM002EVB))
+$(eval $(call Profile,AWAPN2403))