ath9k: fix some ar913x irq handling issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43342
v19.07.3_mercusys_ac12_duma
Felix Fietkau 10 years ago
parent 2bab3e2796
commit 6aeb3528a8

@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
return IRQ_NONE;
- /* shared irq, not for us */
+ if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
+ if (!AR_SREV_9100(ah) && test_bit(ATH_OP_HW_RESET, &common->op_flags))
+ return IRQ_NONE;
+ /* shared irq, not for us */
@ -33,7 +33,17 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
/*
* Figure out the reason(s) for the interrupt. Note
* that the hal returns a pseudo-ISR that may include
@@ -613,6 +610,7 @@ int ath_reset(struct ath_softc *sc, stru
@@ -532,6 +529,9 @@ irqreturn_t ath_isr(int irq, void *dev)
ath9k_debug_sync_cause(sc, sync_cause);
status &= ah->imask; /* discard unasked-for bits */
+ if (AR_SREV_9100(ah) && test_bit(ATH_OP_HW_RESET, &common->op_flags))
+ return IRQ_HANDLED;
+
/*
* If there are no status bits set, then this interrupt was not
* for me (should have been caught above).
@@ -613,6 +613,7 @@ int ath_reset(struct ath_softc *sc, stru
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int r;
@ -41,7 +51,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org>
set_bit(ATH_OP_HW_RESET, &common->op_flags);
ath9k_ps_wakeup(sc);
@@ -633,6 +631,7 @@ void ath9k_queue_reset(struct ath_softc
@@ -633,6 +634,7 @@ void ath9k_queue_reset(struct ath_softc
#ifdef CPTCFG_ATH9K_DEBUGFS
RESET_STAT_INC(sc, type);
#endif

@ -87,7 +87,7 @@
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1330,6 +1330,7 @@ struct ieee80211_local {
@@ -1339,6 +1339,7 @@ struct ieee80211_local {
int dynamic_ps_forced_timeout;
int user_power_level; /* in dBm, for all interfaces */

@ -125,9 +125,9 @@
REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON);
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -529,6 +529,11 @@ irqreturn_t ath_isr(int irq, void *dev)
ath9k_debug_sync_cause(sc, sync_cause);
status &= ah->imask; /* discard unasked-for bits */
@@ -532,6 +532,11 @@ irqreturn_t ath_isr(int irq, void *dev)
if (AR_SREV_9100(ah) && test_bit(ATH_OP_HW_RESET, &common->op_flags))
return IRQ_HANDLED;
+ if (test_bit(ATH_DIAG_TRIGGER_ERROR, &ah->diag)) {
+ status |= ATH9K_INT_FATAL;

Loading…
Cancel
Save