dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

generic at803x: remove unneeded patches

Browse Source 
- Remove the "RGMII TX delay fixup" hack and the associated
   DT-property. It was never used in a DT-based platform and
   solved a problem which can be mitigated by using correct
   delays on the MAC side.

 - Remove the patch to enable platform-data support for the
   at803x driver. It was only used by ar71xx which does not
   (and never will) support kernel 4.19 or later.

 - Remove the SmartEEE DT-configuration patch. As explained
   previously, this patch never disabled the Atheros SmartEEE
   implementation, but rather "standard" EEE. This can be done
   on device-tree compatible platforms by adding the
   "eee-broken-1000t" or "eee-broken-100tx" properties to the PHY
   node. As all usages of the old properties are migrated, this
   patch can be removed.

Signed-off-by: David Bauer <mail@david-bauer.net>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
master
David Bauer 4 years ago
parent a8898f1a11
commit 5f4f269ce1
3 changed files with 0 additions and 236 deletions
Show Stats Download Patch File Download Diff File

47
target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch
Unescape Escape View File

@ -1,47 +0,0 @@
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -354,6 +354,14 @@ static int at803x_config_init(struct phy
AT803X_DEBUG_TX_CLK_DLY_EN, 0);
}
+#ifdef CONFIG_OF_MDIO
+ if (phydev->mdio.dev.of_node &&
+ of_property_read_bool(phydev->mdio.dev.of_node,
+ "at803x-disable-smarteee")) {
+ at803x_disable_smarteee(phydev);
+ }
+#endif
+
return 0;
}
@@ -392,6 +400,7 @@ static void at803x_link_change_notify(st
{
struct at803x_priv *priv = phydev->priv;
struct at803x_platform_data *pdata;
+ u8 fixup_rgmii_tx_delay = 0;
pdata = dev_get_platdata(&phydev->mdio.dev);
/*
@@ -421,8 +430,19 @@ static void at803x_link_change_notify(st
} else {
priv->phy_reset = false;
}
- if (pdata && pdata->fixup_rgmii_tx_delay &&
- phydev->speed != priv->prev_speed) {
+
+ if (pdata && pdata->fixup_rgmii_tx_delay)
+ fixup_rgmii_tx_delay = 1;
+
+#ifdef CONFIG_OF_MDIO
+ if (phydev->mdio.dev.of_node &&
+ of_property_read_bool(phydev->mdio.dev.of_node,
+ "at803x-fixup-rgmii-tx-delay")) {
+ fixup_rgmii_tx_delay = 1;
+ }
+#endif
+
+ if (fixup_rgmii_tx_delay && phydev->speed != priv->prev_speed) {
switch (phydev->speed) {
case SPEED_10:
case SPEED_100:

142
target/linux/generic/pending-4.19/734-net-phy-at803x-allow-to-configure-via-pdata.patch
Unescape Escape View File

@ -1,142 +0,0 @@
From: Gabor Juhos <juhosg@openwrt.org>
Subject: net: phy: allow to configure AR803x PHYs via platform data
Add a patch for the at803x phy driver, in order to be able
to configure some register settings via platform data.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
drivers/net/phy/at803x.c | 56 ++++++++++++++++++++++++++++++++
include/linux/platform_data/phy-at803x.h | 11 +++++++
2 files changed, 67 insertions(+)
create mode 100644 include/linux/platform_data/phy-at803x.h
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -12,12 +12,14 @@
*/
#include <linux/phy.h>
+#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
+#include <linux/platform_data/phy-at803x.h>
#define AT803X_INTR_ENABLE 0x12
#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
@@ -45,6 +47,11 @@
#define AT803X_REG_CHIP_CONFIG 0x1f
#define AT803X_BT_BX_REG_SEL 0x8000
+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12
+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8)
+
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
@@ -73,6 +80,7 @@ MODULE_LICENSE("GPL");
struct at803x_priv {
bool phy_reset:1;
+ int prev_speed;
};
struct at803x_context {
@@ -249,8 +257,16 @@ static int at803x_probe(struct phy_devic
return 0;
}
+static void at803x_disable_smarteee(struct phy_device *phydev)
+{
+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+}
+
static int at803x_config_init(struct phy_device *phydev)
{
+ struct at803x_platform_data *pdata;
int ret;
ret = genphy_config_init(phydev);
@@ -271,6 +287,26 @@ static int at803x_config_init(struct phy
return ret;
}
+ pdata = dev_get_platdata(&phydev->mdio.dev);
+ if (pdata) {
+ if (pdata->disable_smarteee)
+ at803x_disable_smarteee(phydev);
+
+ if (pdata->enable_rgmii_rx_delay)
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
+ AT803X_DEBUG_RX_CLK_DLY_EN);
+ else
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
+ AT803X_DEBUG_RX_CLK_DLY_EN, 0);
+
+ if (pdata->enable_rgmii_tx_delay)
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
+ AT803X_DEBUG_TX_CLK_DLY_EN);
+ else
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
+ AT803X_DEBUG_TX_CLK_DLY_EN, 0);
+ }
+
return 0;
}
@@ -308,6 +344,8 @@ static int at803x_config_intr(struct phy
static void at803x_link_change_notify(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
+ struct at803x_platform_data *pdata;
+ pdata = dev_get_platdata(&phydev->mdio.dev);
/*
* Conduct a hardware reset for AT8030/2 every time a link loss is
@@ -336,6 +374,24 @@ static void at803x_link_change_notify(st
} else {
priv->phy_reset = false;
}
+ if (pdata && pdata->fixup_rgmii_tx_delay &&
+ phydev->speed != priv->prev_speed) {
+ switch (phydev->speed) {
+ case SPEED_10:
+ case SPEED_100:
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
+ AT803X_DEBUG_TX_CLK_DLY_EN);
+ break;
+ case SPEED_1000:
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
+ AT803X_DEBUG_TX_CLK_DLY_EN, 0);
+ break;
+ default:
+ break;
+ }
+
+ priv->prev_speed = phydev->speed;
+ }
}
static int at803x_aneg_done(struct phy_device *phydev)
--- /dev/null
+++ b/include/linux/platform_data/phy-at803x.h
@@ -0,0 +1,11 @@
+#ifndef _PHY_AT803X_PDATA_H
+#define _PHY_AT803X_PDATA_H
+
+struct at803x_platform_data {
+ int disable_smarteee:1;
+ int enable_rgmii_tx_delay:1;
+ int enable_rgmii_rx_delay:1;
+ int fixup_rgmii_tx_delay:1;
+};
+
+#endif /* _PHY_AT803X_PDATA_H */

47
target/linux/generic/pending-4.19/736-net-phy-at803x-allow-to-configure-via-dt.patch
Unescape Escape View File

@ -1,47 +0,0 @@
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -329,6 +329,14 @@ static int at803x_config_init(struct phy
AT803X_DEBUG_TX_CLK_DLY_EN, 0);
}
+#ifdef CONFIG_OF_MDIO
+ if (phydev->mdio.dev.of_node &&
+ of_property_read_bool(phydev->mdio.dev.of_node,
+ "at803x-disable-smarteee")) {
+ at803x_disable_smarteee(phydev);
+ }
+#endif
+
return 0;
}
@@ -367,6 +375,7 @@ static void at803x_link_change_notify(st
{
struct at803x_priv *priv = phydev->priv;
struct at803x_platform_data *pdata;
+ u8 fixup_rgmii_tx_delay = 0;
pdata = dev_get_platdata(&phydev->mdio.dev);
/*
@@ -396,8 +405,19 @@ static void at803x_link_change_notify(st
} else {
priv->phy_reset = false;
}
- if (pdata && pdata->fixup_rgmii_tx_delay &&
- phydev->speed != priv->prev_speed) {
+
+ if (pdata && pdata->fixup_rgmii_tx_delay)
+ fixup_rgmii_tx_delay = 1;
+
+#ifdef CONFIG_OF_MDIO
+ if (phydev->mdio.dev.of_node &&
+ of_property_read_bool(phydev->mdio.dev.of_node,
+ "at803x-fixup-rgmii-tx-delay")) {
+ fixup_rgmii_tx_delay = 1;
+ }
+#endif
+
+ if (fixup_rgmii_tx_delay && phydev->speed != priv->prev_speed) {
switch (phydev->speed) {
case SPEED_10:
case SPEED_100:
Write Preview
Loading…
Cancel
Save