imx6: drop support for kernel 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47509v19.07.3_mercusys_ac12_duma
Luka Perkov
9 years ago
parent
03401fed5e
commit
5f3d29f4e6
@ -1,369 +0,0 @@
|
||||
CONFIG_AHCI_IMX=y
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
||||
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
|
||||
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
|
||||
CONFIG_ARCH_HAS_SG_CHAIN=y
|
||||
CONFIG_ARCH_HAS_TICK_BROADCAST=y
|
||||
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MULTIPLATFORM=y
|
||||
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
|
||||
CONFIG_ARCH_MULTI_V6_V7=y
|
||||
CONFIG_ARCH_MULTI_V7=y
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
|
||||
CONFIG_ARCH_SUPPORTS_UPROBES=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
|
||||
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
|
||||
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
|
||||
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
|
||||
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
|
||||
CONFIG_ARM=y
|
||||
# CONFIG_ARM_CPU_SUSPEND is not set
|
||||
CONFIG_ARM_ERRATA_754322=y
|
||||
CONFIG_ARM_ERRATA_764369=y
|
||||
CONFIG_ARM_ERRATA_775420=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_HAS_SG_CHAIN=y
|
||||
CONFIG_ARM_IMX6Q_CPUFREQ=y
|
||||
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=6
|
||||
CONFIG_ARM_L1_CACHE_SHIFT_6=y
|
||||
# CONFIG_ARM_LPAE is not set
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_ARM_THUMBEE is not set
|
||||
CONFIG_ARM_VIRT_EXT=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_ATAGS=y
|
||||
# CONFIG_ATA_SFF is not set
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
# CONFIG_CACHE_L2X0 is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CLKSRC_OF=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPU_32v6K=y
|
||||
CONFIG_CPU_32v7=y
|
||||
CONFIG_CPU_ABRT_EV7=y
|
||||
# CONFIG_CPU_BPREDICT_DISABLE is not set
|
||||
CONFIG_CPU_CACHE_V7=y
|
||||
CONFIG_CPU_CACHE_VIPT=y
|
||||
CONFIG_CPU_COPY_V6=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
||||
CONFIG_CPU_FREQ_GOV_COMMON=y
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_FREQ_STAT_DETAILS=y
|
||||
CONFIG_CPU_HAS_ASID=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_PABRT_V7=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_TLB_V7=y
|
||||
CONFIG_CPU_V7=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_SHA1_ARM_NEON=y
|
||||
CONFIG_CRYPTO_SHA512_ARM_NEON=y
|
||||
CONFIG_CRYPTO_XZ=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_IMX_UART_PORT=1
|
||||
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
|
||||
# CONFIG_DEBUG_UART_8250 is not set
|
||||
# CONFIG_DEBUG_UART_PL01X is not set
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
CONFIG_DECOMPRESS_BZIP2=y
|
||||
CONFIG_DECOMPRESS_GZIP=y
|
||||
CONFIG_DECOMPRESS_LZO=y
|
||||
CONFIG_DECOMPRESS_XZ=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_DW_DMAC_CORE is not set
|
||||
# CONFIG_DW_DMAC_PCI is not set
|
||||
# CONFIG_EMAC_ROCKCHIP is not set
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
CONFIG_FEC=y
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IO=y
|
||||
CONFIG_GENERIC_IRQ_CHIP=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_DEVRES=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_MXC=y
|
||||
# CONFIG_GPIO_SYSCON is not set
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HANDLE_DOMAIN_IRQ=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
|
||||
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
|
||||
CONFIG_HAVE_ARCH_JUMP_LABEL=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_PFN_VALID=y
|
||||
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
CONFIG_HAVE_ARM_SCU=y
|
||||
CONFIG_HAVE_ARM_TWD=y
|
||||
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
|
||||
CONFIG_HAVE_BPF_JIT=y
|
||||
CONFIG_HAVE_CC_STACKPROTECTOR=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_CLK_PREPARE=y
|
||||
CONFIG_HAVE_CONTEXT_TRACKING=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DEBUG_KMEMLEAK=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DMA_ATTRS=y
|
||||
CONFIG_HAVE_DMA_CONTIGUOUS=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_HW_BREAKPOINT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_IMX_ANATOP=y
|
||||
CONFIG_HAVE_IMX_GPC=y
|
||||
CONFIG_HAVE_IMX_MMDC=y
|
||||
CONFIG_HAVE_IMX_SRC=y
|
||||
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
|
||||
CONFIG_HAVE_KERNEL_GZIP=y
|
||||
CONFIG_HAVE_KERNEL_LZ4=y
|
||||
CONFIG_HAVE_KERNEL_LZMA=y
|
||||
CONFIG_HAVE_KERNEL_LZO=y
|
||||
CONFIG_HAVE_KERNEL_XZ=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_NET_DSA=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PERF_REGS=y
|
||||
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
CONFIG_HAVE_SMP=y
|
||||
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
|
||||
CONFIG_HAVE_UID16=y
|
||||
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
|
||||
CONFIG_HZ_FIXED=0
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_IMX=y
|
||||
CONFIG_IMX2_WDT=y
|
||||
CONFIG_IMX_DMA=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
# CONFIG_IMX_WEIM is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IOMMU_HELPER=y
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_JBD=y
|
||||
CONFIG_JBD2=y
|
||||
# CONFIG_LEDS_REGULATOR is not set
|
||||
# CONFIG_LEDS_SYSCON is not set
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MDIO_BOARDINFO=y
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
|
||||
CONFIG_MIGHT_HAVE_PCI=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
# CONFIG_MMC_MXC is not set
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
# CONFIG_MMC_TIFM_SD is not set
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_GPMI_NAND=y
|
||||
# CONFIG_MTD_PHYSMAP_OF is not set
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
# CONFIG_MTD_UBI_BLOCK is not set
|
||||
# CONFIG_MTD_UBI_FASTMAP is not set
|
||||
# CONFIG_MTD_UBI_GLUEBI is not set
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MULTI_IRQ_HANDLER=y
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
# CONFIG_MX3_IPU is not set
|
||||
# CONFIG_MXC_DEBUG_BOARD is not set
|
||||
CONFIG_MXS_DMA=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_PTP_CLASSIFY=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NO_BOOTMEM=y
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=4
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_ADDRESS_PCI=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_MTD=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OF_PCI=y
|
||||
CONFIG_OF_PCI_IRQ=y
|
||||
CONFIG_OF_RESERVED_MEM=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0x80000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_IMX6=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_IMX=y
|
||||
CONFIG_PINCTRL_IMX6Q=y
|
||||
CONFIG_PINCTRL_IMX6SL=y
|
||||
# CONFIG_PINCTRL_SINGLE is not set
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_PPS=y
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
CONFIG_PTP_1588_CLOCK=y
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_RCU_STALL_COMMON=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_GZIP=y
|
||||
CONFIG_RD_LZO=y
|
||||
CONFIG_RD_XZ=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPI=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_ANATOP=y
|
||||
# CONFIG_REGULATOR_DEBUG is not set
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_PFUZE100=y
|
||||
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
# CONFIG_RTC_DRV_IMXDI is not set
|
||||
# CONFIG_RTC_DRV_MXC is not set
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_SATA_AHCI_PLATFORM=y
|
||||
CONFIG_SCHED_HRTICK=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SERIAL_IMX=y
|
||||
CONFIG_SERIAL_IMX_CONSOLE=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SMP_ON_UP=y
|
||||
CONFIG_SOC_BUS=y
|
||||
# CONFIG_SOC_IMX50 is not set
|
||||
# CONFIG_SOC_IMX51 is not set
|
||||
# CONFIG_SOC_IMX53 is not set
|
||||
CONFIG_SOC_IMX6=y
|
||||
CONFIG_SOC_IMX6Q=y
|
||||
CONFIG_SOC_IMX6SL=y
|
||||
# CONFIG_SOC_IMX6SX is not set
|
||||
# CONFIG_SOC_VF610 is not set
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_SPI_IMX=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SRAM=y
|
||||
CONFIG_STMP_DEVICE=y
|
||||
CONFIG_STOP_MACHINE=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWP_EMULATE=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
# CONFIG_THUMB2_KERNEL is not set
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_FS_LZO=y
|
||||
CONFIG_UBIFS_FS_XZ=y
|
||||
CONFIG_UBIFS_FS_ZLIB=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||
# CONFIG_USB_MXS_PHY is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USE_OF=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
CONFIG_VFP=y
|
||||
CONFIG_VFPv3=y
|
||||
CONFIG_VMSPLIT_2G=y
|
||||
# CONFIG_VMSPLIT_3G is not set
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_XEN is not set
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
@ -1,11 +0,0 @@
|
||||
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
|
||||
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
|
||||
@@ -19,4 +19,8 @@
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
+
|
||||
+ chosen {
|
||||
+ bootargs = "console=ttymxc0,115200";
|
||||
+ };
|
||||
};
|
||||
@ -1,33 +0,0 @@
|
||||
commit e84634dc6c7f3f6af9b8ef1fb36f0d85c476ab95
|
||||
Author: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu Feb 27 01:02:23 2014 -0800
|
||||
|
||||
PCI: designware: add ability for custom swizzle
|
||||
|
||||
Add the ability for a platform driver to provide a platform-specific
|
||||
swizzle function.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
|
||||
--- a/drivers/pci/host/pcie-designware.c
|
||||
+++ b/drivers/pci/host/pcie-designware.c
|
||||
@@ -492,6 +492,9 @@ int dw_pcie_host_init(struct pcie_port *
|
||||
if (pp->ops->host_init)
|
||||
pp->ops->host_init(pp);
|
||||
|
||||
+ if (pp->swizzle)
|
||||
+ dw_pci.swizzle = pp->swizzle;
|
||||
+
|
||||
dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
|
||||
|
||||
/* program correct class for RC */
|
||||
--- a/drivers/pci/host/pcie-designware.h
|
||||
+++ b/drivers/pci/host/pcie-designware.h
|
||||
@@ -53,6 +53,7 @@ struct pcie_port {
|
||||
struct irq_domain *irq_domain;
|
||||
unsigned long msi_data;
|
||||
DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
|
||||
+ u8 (*swizzle)(struct pci_dev *, u8 *);
|
||||
};
|
||||
|
||||
struct pcie_host_ops {
|
||||
@ -1,81 +0,0 @@
|
||||
commit 2c0d0491438433a1f327f2e754c7b6b55fec51c4
|
||||
Author: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu Feb 27 00:59:53 2014 -0800
|
||||
|
||||
PCI: imx6: ventana: fixup for IRQ mismapping
|
||||
|
||||
The TI XIO2001 PCIe-to-PCI bridge used on several Ventana expansion boards
|
||||
has its slot-to-bridge IRQ mapping reversed from the PCI specification:
|
||||
|
||||
INTA->INTD
|
||||
INTB->INTC
|
||||
INTC->INTB
|
||||
INTD->INTA
|
||||
|
||||
Implement a custom swizzle function that does a fixup on the interrupt for
|
||||
devices on a TI XIO2001 bridge.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
|
||||
--- a/drivers/pci/host/pci-imx6.c
|
||||
+++ b/drivers/pci/host/pci-imx6.c
|
||||
@@ -553,6 +553,39 @@ static int __init imx6_add_pcie_port(str
|
||||
return 0;
|
||||
}
|
||||
|
||||
+/* TI XIO2001 PCIe-to-PCI bridge on GW16082 exp card has IRQs reversed */
|
||||
+u8 ventana_swizzle(struct pci_dev *dev, u8 *pin)
|
||||
+{
|
||||
+ u8 i = 0;
|
||||
+ struct pci_dev *pdev = dev;
|
||||
+
|
||||
+ /* count number of TI XIO2001 bridges on bus */
|
||||
+ while (!pci_is_root_bus(pdev->bus)) {
|
||||
+ if (pdev->bus && pdev->bus->self &&
|
||||
+ (pdev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
|
||||
+ (pdev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
|
||||
+ i++;
|
||||
+ }
|
||||
+ pdev = pdev->bus->self;
|
||||
+ }
|
||||
+ while (!pci_is_root_bus(dev->bus)) {
|
||||
+ /* if we are directly downstream from 1st TI XIO2001 bridge */
|
||||
+ if (dev->bus && dev->bus->self &&
|
||||
+ (dev->bus->self->vendor == PCI_VENDOR_ID_TI) &&
|
||||
+ (dev->bus->self->device == PCI_DEVICE_ID_TI_XIO2001)) {
|
||||
+ if (--i == 0) {
|
||||
+ /* swap IRQs and swizzle backwards */
|
||||
+ *pin = (15 - PCI_SLOT(dev->devfn)) + 1;
|
||||
+ dev = dev->bus->self;
|
||||
+ continue;
|
||||
+ }
|
||||
+ }
|
||||
+ *pin = pci_swizzle_interrupt_pin(dev, *pin);
|
||||
+ dev = dev->bus->self;
|
||||
+ }
|
||||
+ return PCI_SLOT(dev->devfn);
|
||||
+}
|
||||
+
|
||||
static int __init imx6_pcie_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct imx6_pcie *imx6_pcie;
|
||||
@@ -618,6 +651,9 @@ static int __init imx6_pcie_probe(struct
|
||||
return PTR_ERR(imx6_pcie->iomuxc_gpr);
|
||||
}
|
||||
|
||||
+ if (of_machine_is_compatible("gw,ventana"))
|
||||
+ pp->swizzle = ventana_swizzle;
|
||||
+
|
||||
ret = imx6_add_pcie_port(pp, pdev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
--- a/include/linux/pci_ids.h
|
||||
+++ b/include/linux/pci_ids.h
|
||||
@@ -827,6 +827,7 @@
|
||||
#define PCI_DEVICE_ID_TI_XX12 0x8039
|
||||
#define PCI_DEVICE_ID_TI_XX12_FM 0x803b
|
||||
#define PCI_DEVICE_ID_TI_XIO2000A 0x8231
|
||||
+#define PCI_DEVICE_ID_TI_XIO2001 0x8240
|
||||
#define PCI_DEVICE_ID_TI_1130 0xac12
|
||||
#define PCI_DEVICE_ID_TI_1031 0xac13
|
||||
#define PCI_DEVICE_ID_TI_1131 0xac15
|
||||
@ -1,129 +0,0 @@
|
||||
Author: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu May 15 00:12:26 2014 -0700
|
||||
|
||||
net: igb: add i210/i211 support for phy read/write
|
||||
|
||||
The i210/i211 uses the MDICNFG register for the phy address instead of the
|
||||
MDIC register.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
@@ -135,7 +135,7 @@ out:
|
||||
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
{
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
- u32 i, mdic = 0;
|
||||
+ u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
if (offset > MAX_PHY_REG_ADDRESS) {
|
||||
@@ -148,11 +148,25 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
||||
* Control register. The MAC will take care of interfacing with the
|
||||
* PHY to retrieve the desired data.
|
||||
*/
|
||||
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
- (E1000_MDIC_OP_READ));
|
||||
+ switch (hw->mac.type) {
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (E1000_MDIC_OP_READ));
|
||||
+ break;
|
||||
+ default:
|
||||
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (E1000_MDIC_OP_READ));
|
||||
+ break;
|
||||
+ }
|
||||
|
||||
wr32(E1000_MDIC, mdic);
|
||||
+ wrfl();
|
||||
|
||||
/* Poll the ready bit to see if the MDI read completed
|
||||
* Increasing the time out as testing showed failures with
|
||||
@@ -177,6 +191,18 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
||||
*data = (u16) mdic;
|
||||
|
||||
out:
|
||||
+ switch (hw->mac.type) {
|
||||
+ /* restore MDICNFG to have phy's addr */
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ break;
|
||||
+ default:
|
||||
+ break;
|
||||
+ }
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
@@ -191,7 +217,7 @@ out:
|
||||
s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
{
|
||||
struct e1000_phy_info *phy = &hw->phy;
|
||||
- u32 i, mdic = 0;
|
||||
+ u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
if (offset > MAX_PHY_REG_ADDRESS) {
|
||||
@@ -204,12 +230,27 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
* Control register. The MAC will take care of interfacing with the
|
||||
* PHY to retrieve the desired data.
|
||||
*/
|
||||
- mdic = (((u32)data) |
|
||||
- (offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
- (E1000_MDIC_OP_WRITE));
|
||||
+ switch (hw->mac.type) {
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ mdic = (((u32)data) |
|
||||
+ (offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (E1000_MDIC_OP_WRITE));
|
||||
+ break;
|
||||
+ default:
|
||||
+ mdic = (((u32)data) |
|
||||
+ (offset << E1000_MDIC_REG_SHIFT) |
|
||||
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (E1000_MDIC_OP_WRITE));
|
||||
+ break;
|
||||
+ }
|
||||
|
||||
wr32(E1000_MDIC, mdic);
|
||||
+ wrfl();
|
||||
|
||||
/* Poll the ready bit to see if the MDI read completed
|
||||
* Increasing the time out as testing showed failures with
|
||||
@@ -233,6 +274,18 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
}
|
||||
|
||||
out:
|
||||
+ switch (hw->mac.type) {
|
||||
+ /* restore MDICNFG to have phy's addr */
|
||||
+ case e1000_i210:
|
||||
+ case e1000_i211:
|
||||
+ mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
+ mdicnfg |= (hw->phy.addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ wr32(E1000_MDICNFG, mdicnfg);
|
||||
+ break;
|
||||
+ default:
|
||||
+ break;
|
||||
+ }
|
||||
return ret_val;
|
||||
}
|
||||
|
||||
@ -1,260 +0,0 @@
|
||||
From 16df7dc5901c1cb2a40f6adbd0d9423768ed8210 Mon Sep 17 00:00:00 2001
|
||||
From: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu, 15 May 2014 00:29:18 -0700
|
||||
Subject: [PATCH] net: igb: add phy read/write functions that accept phy addr
|
||||
|
||||
Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
|
||||
The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
|
||||
to this function.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/igb/e1000_82575.c | 4 +-
|
||||
drivers/net/ethernet/intel/igb/e1000_phy.c | 74 +++++++++++++++++++---------
|
||||
drivers/net/ethernet/intel/igb/e1000_phy.h | 6 ++-
|
||||
3 files changed, 58 insertions(+), 26 deletions(-)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
@@ -2129,7 +2129,7 @@ static s32 igb_read_phy_reg_82580(struct
|
||||
if (ret_val)
|
||||
goto out;
|
||||
|
||||
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
@@ -2154,7 +2154,7 @@ static s32 igb_write_phy_reg_82580(struc
|
||||
if (ret_val)
|
||||
goto out;
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
|
||||
@@ -132,9 +132,8 @@ out:
|
||||
* Reads the MDI control regsiter in the PHY at offset and stores the
|
||||
* information read to data.
|
||||
**/
|
||||
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
|
||||
{
|
||||
- struct e1000_phy_info *phy = &hw->phy;
|
||||
u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
@@ -153,14 +152,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
|
||||
case e1000_i211:
|
||||
mdicnfg = rd32(E1000_MDICNFG);
|
||||
mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
wr32(E1000_MDICNFG, mdicnfg);
|
||||
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
(E1000_MDIC_OP_READ));
|
||||
break;
|
||||
default:
|
||||
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (addr << E1000_MDIC_PHY_SHIFT) |
|
||||
(E1000_MDIC_OP_READ));
|
||||
break;
|
||||
}
|
||||
@@ -214,9 +213,8 @@ out:
|
||||
*
|
||||
* Writes data to MDI control register in the PHY at offset.
|
||||
**/
|
||||
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
|
||||
{
|
||||
- struct e1000_phy_info *phy = &hw->phy;
|
||||
u32 i, mdicnfg, mdic = 0;
|
||||
s32 ret_val = 0;
|
||||
|
||||
@@ -235,7 +233,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
case e1000_i211:
|
||||
mdicnfg = rd32(E1000_MDICNFG);
|
||||
mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
|
||||
- mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
+ mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
|
||||
wr32(E1000_MDICNFG, mdicnfg);
|
||||
mdic = (((u32)data) |
|
||||
(offset << E1000_MDIC_REG_SHIFT) |
|
||||
@@ -244,7 +242,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
|
||||
default:
|
||||
mdic = (((u32)data) |
|
||||
(offset << E1000_MDIC_REG_SHIFT) |
|
||||
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
|
||||
+ (addr << E1000_MDIC_PHY_SHIFT) |
|
||||
(E1000_MDIC_OP_WRITE));
|
||||
break;
|
||||
}
|
||||
@@ -464,7 +462,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
|
||||
goto out;
|
||||
|
||||
if (offset > MAX_PHY_MULTI_PAGE_REG) {
|
||||
- ret_val = igb_write_phy_reg_mdic(hw,
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
if (ret_val) {
|
||||
@@ -473,8 +471,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
|
||||
}
|
||||
}
|
||||
|
||||
- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
- data);
|
||||
+ ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
|
||||
+ MAX_PHY_REG_ADDRESS & offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
@@ -503,7 +501,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
|
||||
goto out;
|
||||
|
||||
if (offset > MAX_PHY_MULTI_PAGE_REG) {
|
||||
- ret_val = igb_write_phy_reg_mdic(hw,
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
|
||||
IGP01E1000_PHY_PAGE_SELECT,
|
||||
(u16)offset);
|
||||
if (ret_val) {
|
||||
@@ -512,8 +510,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
|
||||
}
|
||||
}
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
|
||||
- data);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
|
||||
+ MAX_PHY_REG_ADDRESS & offset, data);
|
||||
|
||||
hw->phy.ops.release(hw);
|
||||
|
||||
@@ -2464,8 +2462,9 @@ out:
|
||||
}
|
||||
|
||||
/**
|
||||
- * igb_write_phy_reg_gs40g - Write GS40G PHY register
|
||||
+ * igb_write_reg_gs40g - Write GS40G PHY register
|
||||
* @hw: pointer to the HW structure
|
||||
+ * @addr: phy address to write to
|
||||
* @offset: lower half is register offset to write to
|
||||
* upper half is page to use.
|
||||
* @data: data to write at register offset
|
||||
@@ -2473,7 +2472,7 @@ out:
|
||||
* Acquires semaphore, if necessary, then writes the data to PHY register
|
||||
* at the offset. Release any acquired semaphores before exiting.
|
||||
**/
|
||||
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
|
||||
{
|
||||
s32 ret_val;
|
||||
u16 page = offset >> GS40G_PAGE_SHIFT;
|
||||
@@ -2483,10 +2482,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
|
||||
if (ret_val)
|
||||
goto release;
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
|
||||
|
||||
release:
|
||||
hw->phy.ops.release(hw);
|
||||
@@ -2494,8 +2493,24 @@ release:
|
||||
}
|
||||
|
||||
/**
|
||||
- * igb_read_phy_reg_gs40g - Read GS40G PHY register
|
||||
+ * igb_write_phy_reg_gs40g - Write GS40G PHY register
|
||||
+ * @hw: pointer to the HW structure
|
||||
+ * @offset: lower half is register offset to write to
|
||||
+ * upper half is page to use.
|
||||
+ * @data: data to write at register offset
|
||||
+ *
|
||||
+ * Acquires semaphore, if necessary, then writes the data to PHY register
|
||||
+ * at the offset. Release any acquired semaphores before exiting.
|
||||
+ **/
|
||||
+s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
|
||||
+{
|
||||
+ return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
+ * igb_read_reg_gs40g - Read GS40G PHY register
|
||||
* @hw: pointer to the HW structure
|
||||
+ * @addr: phy address to read from
|
||||
* @offset: lower half is register offset to read to
|
||||
* upper half is page to use.
|
||||
* @data: data to read at register offset
|
||||
@@ -2503,7 +2518,7 @@ release:
|
||||
* Acquires semaphore, if necessary, then reads the data in the PHY register
|
||||
* at the offset. Release any acquired semaphores before exiting.
|
||||
**/
|
||||
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
|
||||
{
|
||||
s32 ret_val;
|
||||
u16 page = offset >> GS40G_PAGE_SHIFT;
|
||||
@@ -2513,10 +2528,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
|
||||
if (ret_val)
|
||||
return ret_val;
|
||||
|
||||
- ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
|
||||
+ ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
|
||||
if (ret_val)
|
||||
goto release;
|
||||
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
|
||||
+ ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
|
||||
|
||||
release:
|
||||
hw->phy.ops.release(hw);
|
||||
@@ -2524,6 +2539,21 @@ release:
|
||||
}
|
||||
|
||||
/**
|
||||
+ * igb_read_phy_reg_gs40g - Read GS40G PHY register
|
||||
+ * @hw: pointer to the HW structure
|
||||
+ * @offset: lower half is register offset to read to
|
||||
+ * upper half is page to use.
|
||||
+ * @data: data to read at register offset
|
||||
+ *
|
||||
+ * Acquires semaphore, if necessary, then reads the data in the PHY register
|
||||
+ * at the offset. Release any acquired semaphores before exiting.
|
||||
+ **/
|
||||
+s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
|
||||
+{
|
||||
+ return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
|
||||
+}
|
||||
+
|
||||
+/**
|
||||
* igb_set_master_slave_mode - Setup PHY for Master/slave mode
|
||||
* @hw: pointer to the HW structure
|
||||
*
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
|
||||
@@ -61,8 +61,8 @@ s32 igb_phy_has_link(struct e1000_hw *h
|
||||
void igb_power_up_phy_copper(struct e1000_hw *hw);
|
||||
void igb_power_down_phy_copper(struct e1000_hw *hw);
|
||||
s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
|
||||
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
|
||||
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
|
||||
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
|
||||
s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
|
||||
s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
|
||||
@@ -72,6 +72,8 @@ s32 igb_phy_force_speed_duplex_82580(st
|
||||
s32 igb_get_cable_length_82580(struct e1000_hw *hw);
|
||||
s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
|
||||
s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
|
||||
+s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
|
||||
+s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
|
||||
s32 igb_check_polarity_m88(struct e1000_hw *hw);
|
||||
|
||||
/* IGP01E1000 Specific Registers */
|
||||
@ -1,308 +0,0 @@
|
||||
From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
|
||||
From: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Thu, 15 May 2014 12:36:23 -0700
|
||||
Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
|
||||
|
||||
If an i210 is configured for 1000BASE-BX link_mode and has an external phy
|
||||
specified, then register an mii bus using the external phy address as
|
||||
a mask.
|
||||
|
||||
An i210 hooked to an external standard phy will be configured with a link_mo
|
||||
of SGMII in which case phy ops will be configured and used internall in the
|
||||
igb driver for link status. However, in certain cases one might be using a
|
||||
backplane SerDes connection to something that talks on the mdio bus but is
|
||||
not a standard phy, such as a switch. In this case by registering an mdio
|
||||
bus a phy driver can manage the device.
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/igb/e1000_82575.c | 15 +++
|
||||
drivers/net/ethernet/intel/igb/e1000_hw.h | 7 ++
|
||||
drivers/net/ethernet/intel/igb/igb_main.c | 168 ++++++++++++++++++++++++++-
|
||||
3 files changed, 185 insertions(+), 5 deletions(-)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
|
||||
@@ -598,13 +598,25 @@ static s32 igb_get_invariants_82575(stru
|
||||
switch (link_mode) {
|
||||
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
|
||||
hw->phy.media_type = e1000_media_type_internal_serdes;
|
||||
+ if (igb_sgmii_uses_mdio_82575(hw)) {
|
||||
+ u32 mdicnfg = rd32(E1000_MDICNFG);
|
||||
+ mdicnfg &= E1000_MDICNFG_PHY_MASK;
|
||||
+ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
|
||||
+ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
|
||||
+ hw->phy.addr);
|
||||
+ } else {
|
||||
+ hw_dbg("1000BASE_KX");
|
||||
+ }
|
||||
break;
|
||||
case E1000_CTRL_EXT_LINK_MODE_SGMII:
|
||||
/* Get phy control interface type set (MDIO vs. I2C)*/
|
||||
if (igb_sgmii_uses_mdio_82575(hw)) {
|
||||
hw->phy.media_type = e1000_media_type_copper;
|
||||
dev_spec->sgmii_active = true;
|
||||
+ hw_dbg("SGMII with external MDIO PHY");
|
||||
break;
|
||||
+ } else {
|
||||
+ hw_dbg("SGMII with external I2C PHY");
|
||||
}
|
||||
/* fall through for I2C based SGMII */
|
||||
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
|
||||
@@ -621,8 +633,11 @@ static s32 igb_get_invariants_82575(stru
|
||||
hw->phy.media_type = e1000_media_type_copper;
|
||||
dev_spec->sgmii_active = true;
|
||||
}
|
||||
+ hw_dbg("SERDES with external SFP");
|
||||
|
||||
break;
|
||||
+ } else {
|
||||
+ hw_dbg("SERDES");
|
||||
}
|
||||
|
||||
/* do not change link mode for 100BaseFX */
|
||||
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
|
||||
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
|
||||
@@ -27,6 +27,7 @@
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/netdevice.h>
|
||||
+#include <linux/phy.h>
|
||||
|
||||
#include "e1000_regs.h"
|
||||
#include "e1000_defines.h"
|
||||
@@ -543,6 +544,12 @@ struct e1000_hw {
|
||||
struct e1000_mbx_info mbx;
|
||||
struct e1000_host_mng_dhcp_cookie mng_cookie;
|
||||
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ /* Phylib and MDIO interface */
|
||||
+ struct mii_bus *mii_bus;
|
||||
+ struct phy_device *phy_dev;
|
||||
+ phy_interface_t phy_interface;
|
||||
+#endif
|
||||
union {
|
||||
struct e1000_dev_spec_82575 _82575;
|
||||
} dev_spec;
|
||||
--- a/drivers/net/ethernet/intel/igb/igb_main.c
|
||||
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
|
||||
@@ -41,6 +41,7 @@
|
||||
#include <linux/if_vlan.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/pci-aspm.h>
|
||||
+#include <linux/phy.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ip.h>
|
||||
@@ -2237,6 +2238,126 @@ static s32 igb_init_i2c(struct igb_adapt
|
||||
return status;
|
||||
}
|
||||
|
||||
+
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+/*
|
||||
+ * MMIO/PHYdev support
|
||||
+ */
|
||||
+
|
||||
+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
|
||||
+{
|
||||
+ struct e1000_hw *hw = bus->priv;
|
||||
+ u16 out;
|
||||
+ int err;
|
||||
+
|
||||
+ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
|
||||
+ if (err)
|
||||
+ return err;
|
||||
+ return out;
|
||||
+}
|
||||
+
|
||||
+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
|
||||
+ u16 val)
|
||||
+{
|
||||
+ struct e1000_hw *hw = bus->priv;
|
||||
+
|
||||
+ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
|
||||
+}
|
||||
+
|
||||
+static int igb_enet_mdio_reset(struct mii_bus *bus)
|
||||
+{
|
||||
+ udelay(300);
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void igb_enet_mii_link(struct net_device *netdev)
|
||||
+{
|
||||
+}
|
||||
+
|
||||
+/* Probe the mdio bus for phys and connect them */
|
||||
+static int igb_enet_mii_probe(struct net_device *netdev)
|
||||
+{
|
||||
+ struct igb_adapter *adapter = netdev_priv(netdev);
|
||||
+ struct e1000_hw *hw = &adapter->hw;
|
||||
+ struct phy_device *phy_dev = NULL;
|
||||
+ int phy_id;
|
||||
+
|
||||
+ /* check for attached phy */
|
||||
+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
|
||||
+ if (hw->mii_bus->phy_map[phy_id]) {
|
||||
+ phy_dev = hw->mii_bus->phy_map[phy_id];
|
||||
+ break;
|
||||
+ }
|
||||
+ }
|
||||
+ if (!phy_dev) {
|
||||
+ netdev_err(netdev, "no PHY found\n");
|
||||
+ return -ENODEV;
|
||||
+ }
|
||||
+
|
||||
+ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
|
||||
+ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
|
||||
+ igb_enet_mii_link, hw->phy_interface);
|
||||
+ if (IS_ERR(phy_dev)) {
|
||||
+ netdev_err(netdev, "could not attach to PHY\n");
|
||||
+ return PTR_ERR(phy_dev);
|
||||
+ }
|
||||
+
|
||||
+ hw->phy_dev = phy_dev;
|
||||
+ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
|
||||
+ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+/* Create and register mdio bus */
|
||||
+static int igb_enet_mii_init(struct pci_dev *pdev)
|
||||
+{
|
||||
+ struct mii_bus *mii_bus;
|
||||
+ struct net_device *netdev = pci_get_drvdata(pdev);
|
||||
+ struct igb_adapter *adapter = netdev_priv(netdev);
|
||||
+ struct e1000_hw *hw = &adapter->hw;
|
||||
+ int err;
|
||||
+
|
||||
+ mii_bus = mdiobus_alloc();
|
||||
+ if (mii_bus == NULL) {
|
||||
+ err = -ENOMEM;
|
||||
+ goto err_out;
|
||||
+ }
|
||||
+
|
||||
+ mii_bus->name = "igb_enet_mii_bus";
|
||||
+ mii_bus->read = igb_enet_mdio_read;
|
||||
+ mii_bus->write = igb_enet_mdio_write;
|
||||
+ mii_bus->reset = igb_enet_mdio_reset;
|
||||
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
|
||||
+ pci_name(pdev), hw->device_id + 1);
|
||||
+ mii_bus->priv = hw;
|
||||
+ mii_bus->parent = &pdev->dev;
|
||||
+ mii_bus->phy_mask = ~(1 << hw->phy.addr);
|
||||
+
|
||||
+ err = mdiobus_register(mii_bus);
|
||||
+ if (err) {
|
||||
+ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
|
||||
+ goto err_out_free_mdiobus;
|
||||
+ }
|
||||
+ hw->mii_bus = mii_bus;
|
||||
+
|
||||
+ return 0;
|
||||
+
|
||||
+err_out_free_mdiobus:
|
||||
+ mdiobus_free(mii_bus);
|
||||
+err_out:
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static void igb_enet_mii_remove(struct e1000_hw *hw)
|
||||
+{
|
||||
+ if (hw->mii_bus) {
|
||||
+ mdiobus_unregister(hw->mii_bus);
|
||||
+ mdiobus_free(hw->mii_bus);
|
||||
+ }
|
||||
+}
|
||||
+#endif /* CONFIG_PHYLIB */
|
||||
+
|
||||
/**
|
||||
* igb_probe - Device Initialization Routine
|
||||
* @pdev: PCI device information struct
|
||||
@@ -2659,6 +2780,13 @@ static int igb_probe(struct pci_dev *pde
|
||||
}
|
||||
}
|
||||
pm_runtime_put_noidle(&pdev->dev);
|
||||
+
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ /* create and register the mdio bus if using ext phy */
|
||||
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
||||
+ igb_enet_mii_init(pdev);
|
||||
+#endif
|
||||
+
|
||||
return 0;
|
||||
|
||||
err_register:
|
||||
@@ -2802,6 +2930,10 @@ static void igb_remove(struct pci_dev *p
|
||||
struct e1000_hw *hw = &adapter->hw;
|
||||
|
||||
pm_runtime_get_noresume(&pdev->dev);
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
||||
+ igb_enet_mii_remove(hw);
|
||||
+#endif
|
||||
#ifdef CONFIG_IGB_HWMON
|
||||
igb_sysfs_exit(adapter);
|
||||
#endif
|
||||
@@ -3115,6 +3247,12 @@ static int __igb_open(struct net_device
|
||||
if (!resuming)
|
||||
pm_runtime_put(&pdev->dev);
|
||||
|
||||
+#ifdef CONFIG_PHYLIB
|
||||
+ /* Probe and connect to PHY if using ext phy */
|
||||
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
||||
+ igb_enet_mii_probe(netdev);
|
||||
+#endif
|
||||
+
|
||||
/* start the watchdog. */
|
||||
hw->mac.get_link_status = 1;
|
||||
schedule_work(&adapter->watchdog_task);
|
||||
@@ -7111,21 +7249,41 @@ void igb_alloc_rx_buffers(struct igb_rin
|
||||
static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
||||
{
|
||||
struct igb_adapter *adapter = netdev_priv(netdev);
|
||||
+ struct e1000_hw *hw = &adapter->hw;
|
||||
struct mii_ioctl_data *data = if_mii(ifr);
|
||||
|
||||
- if (adapter->hw.phy.media_type != e1000_media_type_copper)
|
||||
+ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
|
||||
+ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
switch (cmd) {
|
||||
case SIOCGMIIPHY:
|
||||
- data->phy_id = adapter->hw.phy.addr;
|
||||
+ data->phy_id = hw->phy.addr;
|
||||
break;
|
||||
case SIOCGMIIREG:
|
||||
- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
|
||||
- &data->val_out))
|
||||
- return -EIO;
|
||||
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
|
||||
+ if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
|
||||
+ data->reg_num & 0x1F,
|
||||
+ &data->val_out))
|
||||
+ return -EIO;
|
||||
+ } else {
|
||||
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
|
||||
+ &data->val_out))
|
||||
+ return -EIO;
|
||||
+ }
|
||||
break;
|
||||
case SIOCSMIIREG:
|
||||
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
|
||||
+ if (igb_write_reg_gs40g(hw, data->phy_id,
|
||||
+ data->reg_num & 0x1F,
|
||||
+ data->val_in))
|
||||
+ return -EIO;
|
||||
+ } else {
|
||||
+ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
|
||||
+ data->val_in))
|
||||
+ return -EIO;
|
||||
+ }
|
||||
+ break;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
@ -1,27 +0,0 @@
|
||||
--- a/drivers/net/phy/Kconfig
|
||||
+++ b/drivers/net/phy/Kconfig
|
||||
@@ -292,6 +292,14 @@ endif # RTL8366_SMI
|
||||
|
||||
source "drivers/net/phy/b53/Kconfig"
|
||||
|
||||
+config GATEWORKS_GW16083
|
||||
+ tristate "Gateworks GW16083 Ethernet Expansion Mezzanine"
|
||||
+ ---help---
|
||||
+ The Gateworks GW16083 Ethernet Expansion Mezzanine connects to a
|
||||
+ Gateworks Ventana baseboard and provides a 7-port GbE managed
|
||||
+ Ethernet switch with 4 dedicated GbE RJ45 ports, and 2 Gbe/SFP
|
||||
+ ports"
|
||||
+
|
||||
endif # PHYLIB
|
||||
|
||||
config MICREL_KS8995MA
|
||||
--- a/drivers/net/phy/Makefile
|
||||
+++ b/drivers/net/phy/Makefile
|
||||
@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o
|
||||
obj-$(CONFIG_DP83640_PHY) += dp83640.o
|
||||
obj-$(CONFIG_STE10XP) += ste10Xp.o
|
||||
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
||||
+obj-$(CONFIG_GATEWORKS_GW16083) += gw16083.o
|
||||
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
|
||||
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
|
||||
obj-$(CONFIG_AT803X_PHY) += at803x.o
|
||||
@ -1,56 +0,0 @@
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
|
||||
@@ -89,6 +89,11 @@
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&fec {
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
|
||||
@@ -266,6 +266,11 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&pcie {
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||||
@@ -267,6 +267,11 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&pcie {
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||||
@@ -308,6 +308,11 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ gw16083: gw16083@52 {
|
||||
+ compatible = "gateworks,gw16083";
|
||||
+ reg = <0x52>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -1,110 +0,0 @@
|
||||
From 840202d23892baaff74be11ec71c3ffc6ad6298e Mon Sep 17 00:00:00 2001
|
||||
From: Tim Harvey <tharvey@gateworks.com>
|
||||
Date: Tue, 20 Jan 2015 08:46:55 -0800
|
||||
Subject: [PATCH] ARM: dts: imx6 ventana: Add PCI nodes for on-board PCI
|
||||
devices
|
||||
|
||||
If the PCI nodes are defined, drivers can access information from the DT.
|
||||
For example, the sky2 enet driver can obtain the mac address configured
|
||||
from the bootloader (which is applied to the DT node with the ethernet1 alias).
|
||||
|
||||
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||||
---
|
||||
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
|
||||
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
|
||||
2 files changed, 72 insertions(+), 4 deletions(-)
|
||||
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||||
@@ -280,8 +280,42 @@
|
||||
reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
- eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
||||
- compatible = "marvell,sky2";
|
||||
+ pcie@0,0 {
|
||||
+ /* 00:00.0 0604: 16c3:abcd root host-bridge */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x0 0 0 0 0>;
|
||||
+
|
||||
+ pcie@0,0 {
|
||||
+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x0 0 0 0 0>;
|
||||
+
|
||||
+ /*
|
||||
+ * GigE PCI dev node needs to be defined so that enet
|
||||
+ * driver can use it to obtain its boot-loader
|
||||
+ * specified MAC
|
||||
+ */
|
||||
+ pcie@4,0 {
|
||||
+ /* 02:04.0 0604: 10b5:8609: PEX port bridge */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x2000 0 0 0 0>;
|
||||
+
|
||||
+ eth1: pci@0,0 {
|
||||
+ /* 04:00.0 0200: 11ab:4380: GigE */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x0 0 0 0 0>;
|
||||
+ compatible = "marvell,sky2";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
};
|
||||
};
|
||||
|
||||
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||||
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||||
@@ -369,8 +369,42 @@
|
||||
reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
- eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
||||
- compatible = "marvell,sky2";
|
||||
+ pcie@0,0 {
|
||||
+ /* 00:00.0 0604: 16c3:abcd root host-bridge */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x0 0 0 0 0>;
|
||||
+
|
||||
+ pcie@0,0 {
|
||||
+ /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x0 0 0 0 0>;
|
||||
+
|
||||
+ /*
|
||||
+ * GigE PCI dev node needs to be defined so that enet
|
||||
+ * driver can use it to obtain its boot-loader
|
||||
+ * specified MAC
|
||||
+ */
|
||||
+ pcie@8,0 {
|
||||
+ /* 02:08.0 0604: 10b5:8609: PEX port bridge */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x4000 0 0 0 0>;
|
||||
+
|
||||
+ eth1: pci@0,0 {
|
||||
+ /* 08:00.0 0200: 11ab:4380: GigE */
|
||||
+ #address-cells = <3>;
|
||||
+ #size-cells = <2>;
|
||||
+ device_type = "pci";
|
||||
+ reg = <0x0 0 0 0 0>;
|
||||
+ compatible = "marvell,sky2";
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
};
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue