dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Oops! I've copied r7557 instead of r7757, sorry

Browse Source 
SVN-Revision: 7799
v19.07.3_mercusys_ac12_duma
Gabor Juhos 17 years ago
parent 9679dfcc62
commit 5074eb5ac7
11 changed files with 0 additions and 411 deletions
Show Stats Download Patch File Download Diff File

89
target/linux/adm5120-2.6/patches/001-adm5120.patch
Unescape Escape View File

@ -1,89 +0,0 @@
diff -urN linux-2.6.19.2/arch/mips/Kconfig linux-2.6.19.2.new/arch/mips/Kconfig
--- linux-2.6.19.2/arch/mips/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.new/arch/mips/Kconfig 2007-01-23 14:49:38.000000000 +0100
@@ -12,6 +12,21 @@
prompt "System type"
default SGI_IP22
+config MIPS_ADM5120
+ bool "Support for ADM5120 SoC"
+ select SYS_HAS_CPU_MIPS32_R1
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select GENERIC_GPIO
+
+config PCI_ADM5120
+ bool "Add PCI control support for ADM5120"
+ depends on MIPS_ADM5120 && PCI
+
config MIPS_MTX1
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
diff -urN linux-2.6.19.2/arch/mips/Makefile linux-2.6.19.2.new/arch/mips/Makefile
--- linux-2.6.19.2/arch/mips/Makefile 2007-01-23 14:02:57.000000000 +0100
+++ linux-2.6.19.2.new/arch/mips/Makefile 2007-01-23 14:49:39.000000000 +0100
@@ -165,6 +165,14 @@
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
+# ADMtek 5120
+#
+
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
+
+#
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
diff -urN linux-2.6.19.2/include/asm-mips/bootinfo.h linux-2.6.19.2.new/include/asm-mips/bootinfo.h
--- linux-2.6.19.2/include/asm-mips/bootinfo.h 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.new/include/asm-mips/bootinfo.h 2007-01-23 14:49:40.000000000 +0100
@@ -212,6 +212,42 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+/*
+ * Valid machtype for group ADMtek ADM5120
+ */
+#define MACH_GROUP_ADM5120 23
+#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
+
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);

25
target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
Unescape Escape View File

@ -1,25 +0,0 @@
diff -urN linux-2.6.19.2/drivers/mtd/maps/Kconfig linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig
--- linux-2.6.19.2/drivers/mtd/maps/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Kconfig 2007-01-23 01:13:39.000000000 +0100
@@ -622,5 +622,10 @@
This selection automatically selects the map_ram driver.
+config MTD_ADM5120
+ tristate "Map driver for ADMtek ADM5120 boards"
+ depends on MIPS_ADM5120
+ select MTD_CFI_AMDSTD
+
endmenu
diff -urN linux-2.6.19.2/drivers/mtd/maps/Makefile linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile
--- linux-2.6.19.2/drivers/mtd/maps/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/mtd/maps/Makefile 2007-01-23 01:20:52.000000000 +0100
@@ -43,6 +43,7 @@
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
+obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o
obj-$(CONFIG_MTD_LASAT) += lasat.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o

25
target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
Unescape Escape View File

@ -1,25 +0,0 @@
diff -urN linux-2.6.19.2/drivers/net/Kconfig linux-2.6.19.2-adm5120/drivers/net/Kconfig
--- linux-2.6.19.2/drivers/net/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/net/Kconfig 2007-01-23 01:13:39.000000000 +0100
@@ -450,6 +450,10 @@
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
+config MIPS_ADM5120_ENET
+ tristate "MIPS ADM5120 Ethernet switch support"
+ depends on NET_ETHERNET && MIPS_ADM5120
+
config NET_SB1250_MAC
tristate "SB1250 Ethernet support"
depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
diff -urN linux-2.6.19.2/drivers/net/Makefile linux-2.6.19.2-adm5120/drivers/net/Makefile
--- linux-2.6.19.2/drivers/net/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/net/Makefile 2007-01-23 01:13:39.000000000 +0100
@@ -164,6 +164,7 @@
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o

50
target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
Unescape Escape View File

@ -1,50 +0,0 @@
diff -urN linux-2.6.19.2/drivers/serial/Kconfig linux-2.6.19.2-adm5120/drivers/serial/Kconfig
--- linux-2.6.19.2/drivers/serial/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/serial/Kconfig 2007-01-23 01:13:39.000000000 +0100
@@ -246,6 +246,22 @@
comment "Non-8250 serial port support"
+config SERIAL_ADM5120
+ bool "ADM5120 serial port support"
+ depends on MIPS_ADM5120
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ Driver for the on chip UARTs on the ADM5120 SoC
+
+config ADM5120_NR_UARTS
+ int "Maximum number of ADM5120 serial ports"
+ depends on SERIAL_ADM5120
+ default "2"
+ ---help---
+ Set this to the number of serial ports you want the driver to
+ support.
+
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
diff -urN linux-2.6.19.2/drivers/serial/Makefile linux-2.6.19.2-adm5120/drivers/serial/Makefile
--- linux-2.6.19.2/drivers/serial/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/serial/Makefile 2007-01-23 01:21:45.000000000 +0100
@@ -20,6 +20,7 @@
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
diff -urN linux-2.6.19.2/include/linux/serial_core.h linux-2.6.19.2-adm5120/include/linux/serial_core.h
--- linux-2.6.19.2/include/linux/serial_core.h 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/include/linux/serial_core.h 2007-01-23 01:13:39.000000000 +0100
@@ -133,6 +133,9 @@
#define PORT_S3C2412 73
+/* ADMtek ADM5120 SoC */
+#define PORT_ADM5120 68
+
#ifdef __KERNEL__
#include <linux/compiler.h>

53
target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
Unescape Escape View File

@ -1,53 +0,0 @@
diff -urN linux-2.6.19.2/drivers/usb/core/hub.c linux-2.6.19.2-adm5120/drivers/usb/core/hub.c
--- linux-2.6.19.2/drivers/usb/core/hub.c 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/usb/core/hub.c 2007-01-23 01:13:39.000000000 +0100
@@ -2156,6 +2156,8 @@
USB_DT_DEVICE << 8, 0,
buf, GET_DESCRIPTOR_BUFSIZE,
(i ? USB_CTRL_GET_TIMEOUT : 1000));
+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
+buf->bDescriptorType, USB_DT_DEVICE);
switch (buf->bMaxPacketSize0) {
case 8: case 16: case 32: case 64: case 255:
if (buf->bDescriptorType ==
diff -urN linux-2.6.19.2/drivers/usb/host/Kconfig linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig
--- linux-2.6.19.2/drivers/usb/host/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/usb/host/Kconfig 2007-01-23 01:13:39.000000000 +0100
@@ -192,3 +192,6 @@
To compile this driver as a module, choose M here: the
module will be called "sl811_cs".
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support"
+ depends on USB && MIPS_ADM5120
diff -urN linux-2.6.19.2/drivers/usb/host/Makefile linux-2.6.19.2-adm5120/drivers/usb/host/Makefile
--- linux-2.6.19.2/drivers/usb/host/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/usb/host/Makefile 2007-01-23 01:13:39.000000000 +0100
@@ -16,3 +16,4 @@
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
diff -urN linux-2.6.19.2/drivers/usb/Kconfig linux-2.6.19.2-adm5120/drivers/usb/Kconfig
--- linux-2.6.19.2/drivers/usb/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/usb/Kconfig 2007-01-23 01:13:39.000000000 +0100
@@ -91,8 +91,6 @@
source "drivers/usb/net/Kconfig"
-source "drivers/usb/mon/Kconfig"
-
comment "USB port drivers"
depends on USB
diff -urN linux-2.6.19.2/drivers/usb/Makefile linux-2.6.19.2-adm5120/drivers/usb/Makefile
--- linux-2.6.19.2/drivers/usb/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/usb/Makefile 2007-01-23 01:22:18.000000000 +0100
@@ -17,6 +17,7 @@
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_ETRAX_USB_HOST) += host/
obj-$(CONFIG_USB_OHCI_AT91) += host/
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/

25
target/linux/adm5120-2.6/patches/006-adm5120_gpio.patch
Unescape Escape View File

@ -1,25 +0,0 @@
diff -urN linux-2.6.19.2/drivers/char/Kconfig linux-2.6.19.2-adm5120/drivers/char/Kconfig
--- linux-2.6.19.2/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/char/Kconfig 2007-01-23 01:13:39.000000000 +0100
@@ -1034,7 +1034,9 @@
The mmtimer device allows direct userspace access to the
Altix system timer.
-source "drivers/char/tpm/Kconfig"
+config ADM5120_GPIO
+ tristate "ADM5120 GPIO"
+ depends on MIPS_ADM5120
config TELCLOCK
tristate "Telecom clock driver for MPBL0010 ATCA SBC"
diff -urN linux-2.6.19.2/drivers/char/Makefile linux-2.6.19.2-adm5120/drivers/char/Makefile
--- linux-2.6.19.2/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2-adm5120/drivers/char/Makefile 2007-01-23 01:20:01.000000000 +0100
@@ -90,6 +90,7 @@
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
+obj-$(CONFIG_ADM5120_GPIO) += adm5120_gpio.o
obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/

20
target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
Unescape Escape View File

@ -1,20 +0,0 @@
diff -urN linux-2.6.21.1/arch/mips/pci/Makefile linux-2.6.21.1-adm5120/arch/mips/pci/Makefile
--- linux-2.6.21.1/arch/mips/pci/Makefile 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.21.1-adm5120/arch/mips/pci/Makefile 2007-01-23 14:49:40.000000000 +0100
@@ -53,3 +53,4 @@
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
--- linux-2.6.21.1.old/include/linux/pci_ids.h 2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1/include/linux/pci_ids.h 2007-05-31 09:36:56.000000000 +0200
@@ -1701,6 +1701,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+#define PCI_VENDOR_ID_ADMTEK 0x1317
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
+
#define PCI_VENDOR_ID_SIIG 0x131f
#define PCI_SUBVENDOR_ID_SIIG 0x131f
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000

37
target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
Unescape Escape View File

@ -1,37 +0,0 @@
diff -Nur linux-2.6.19.2/drivers/mtd/Kconfig.old linux-2.6.19.2/drivers/mtd/Kconfig
--- linux-2.6.19.2/drivers/mtd/Kconfig.old 2007-03-25 08:13:02.000000000 +0200
+++ linux-2.6.19.2/drivers/mtd/Kconfig 2007-03-26 13:37:47.000000000 +0200
@@ -157,6 +157,22 @@
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on MIPS_ADM5120 && MTD_PARTITIONS
+ ---help---
+ MyLoader is a bootloader which allows the user to define partitions
+ in flash devices, by putting a table in the second erase block
+ on the device, similar to a partition table. This table gives the
+ offsets and lengths of the user defined partitions.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
comment "User Modules And Translation Layers"
depends on MTD
diff -Nur linux-2.6.19.2/drivers/mtd/Makefile.old linux-2.6.19.2/drivers/mtd/Makefile
--- linux-2.6.19.2/drivers/mtd/Makefile.old 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2/drivers/mtd/Makefile 2007-03-26 13:28:23.000000000 +0200
@@ -12,6 +12,7 @@
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

31
target/linux/adm5120-2.6/patches/101-mtd-mxflash.patch
Unescape Escape View File

@ -1,31 +0,0 @@
--- linux-2.6.19.2/drivers/mtd/chips/Kconfig.old 2007-01-11 03:10:36.000000000 +0800
+++ linux-2.6.19.2/drivers/mtd/chips/Kconfig 2007-03-29 14:43:32.000000000 +0800
@@ -199,6 +199,14 @@
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
+config MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
+ bool "Force bottom boot for Macronix flash chips"
+ depends on MTD_CFI_AMDSTD
+ help
+ Some Macronix flash chips have wrong CFI info, and the driver may
+ detect the type incorrectly. Select this if the chip part number
+ ends with BTC.
+
config MTD_CFI_STAA
tristate "Support for ST (Advanced Architecture) flash chips"
depends on MTD_GEN_PROBE
--- linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c.old 2007-03-22 16:14:56.000000000 +0800
+++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-29 14:07:28.000000000 +0800
@@ -320,6 +320,11 @@
cfi_tell_features(extp);
#endif
+#ifdef CONFIG_MTD_CFI_AMDSTD_FORCE_BOTTOM_BOOT
+ extp->TopBottom = 2;
+ bootloc = extp->TopBottom;
+#endif
+
bootloc = extp->TopBottom;
if ((bootloc != 2) && (bootloc != 3)) {
printk(KERN_WARNING "%s: CFI does not contain boot "

27
target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
Unescape Escape View File

@ -1,27 +0,0 @@
diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
--- linux.old/arch/mips/kernel/head.S 2006-12-06 17:30:27.000000000 +0100
+++ linux.dev/arch/mips/kernel/head.S 2006-12-06 18:34:43.000000000 +0100
@@ -129,15 +129,20 @@
#endif
.endm
-
j kernel_entry
nop
-
+ nop
+
/*
* Reserved space for exception handlers.
* Necessary for machines which link their kernels at KSEG0.
+ * Use as temporary storage for the kernel command line, so that it
+ * can be updated easily without having to relink the kernel.
*/
- .align 10
+
+EXPORT(_image_cmdline)
+ .ascii "CMDLINE:"
+ .align 10
EXPORT(stext) # used for profiling
EXPORT(_stext)

29
target/linux/adm5120-2.6/patches/500-Nand.patch
Unescape Escape View File

@ -1,29 +0,0 @@
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index cfe288a..c528024 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -55,6 +55,12 @@ config MTD_NAND_TOTO
help
Support for NAND flash on Texas Instruments Toto platform.
+config MTD_NAND_RB100
+ tristate "NAND Flash device on RB100 board"
+ depends on MTD_NAND
+ help
+ Support for NAND flash on RB100 platform.
+
config MTD_NAND_IDS
tristate
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 4174202..2be57c1 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
+obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
Write Preview
Loading…
Cancel
Save