mvebu: add Kobol Helios 4 device

The Helios 4 is a NAS from Kobol
that is powered by an Armada 38x
MicroSOM from Solidrun, similarly
to Clearfog.

This device has:
-Armada 38x CPU
 (dual core ARMv7 1.6 Ghz)
-2 GB of ECC RAM
-Gigabit ethernet (Marvell)
-2x USB 3.0 ports
-4x Sata 3.0 ports
-i2c header (J9 |>GND|SDA|SCL|VCC)
-2x 3-pin fan headers with PWM
-micro-usb port is a TTL/UART to
 USB converter connected to TTL
-MicroSD card slot
-System, 4xSata and 1xUSB LEDs

NOT WORKING: fan control

Fan Control requires a kernel patch
that is available in the Armbian
project (the "default firmware"
of this device) and named
mvebu-gpio-remove-hardcoded
-timer-assignment
This patch isn't acceptable
by OpenWrt, it should be upstreamed.
I also have that patch in my own
local OpenWrt builds,
in case you want a more
clean and less confusing patch
for upstreaming.

To install, write the disk image
on a micro SD card with dd or
win32 disk imager, insert the
card in the slot.
Check that the dip switch battery
for boot selection is as follows
Switch 1 and 2 down/off, switches
3, 4, 5 up/on.

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
master
Alberto Bursi 4 years ago committed by Petr Štetiar
parent f013cc4b26
commit 480003e9eb

@ -31,6 +31,7 @@ CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_LIBATA_LEDS=y
CONFIG_ARM=y
CONFIG_ARMADA_370_CLK=y
CONFIG_ARMADA_370_XP_IRQ=y
@ -64,6 +65,7 @@ CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_ATA=y
CONFIG_ATA_LEDS=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BLK_DEV_LOOP=y

@ -37,6 +37,7 @@ CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_LIBATA_LEDS=y
CONFIG_ARM=y
CONFIG_ARMADA_370_CLK=y
CONFIG_ARMADA_370_XP_IRQ=y
@ -69,6 +70,7 @@ CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_ATA=y
CONFIG_ATA_LEDS=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y

@ -12,6 +12,9 @@ board=$(board_name)
boardname="${board##*,}"
case "$board" in
kobol,helios4)
ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1"
;;
linksys,wrt1200ac)
ucidef_set_led_netdev "wan" "WAN" "pca963x:caiman:white:wan" "wan"
ucidef_set_led_usbport "usb1" "USB 1" "pca963x:caiman:white:usb2" "usb1-port1"

@ -10,6 +10,7 @@ REQUIRE_IMAGE_METADATA=1
platform_check_image() {
case "$(board_name)" in
cznic,turris-omnia|\
kobol,helios4|\
solidrun,clearfog-base-a1|\
solidrun,clearfog-pro-a1)
platform_check_image_sdcard "$1"
@ -26,6 +27,7 @@ platform_do_upgrade() {
nand_do_upgrade "$1"
;;
cznic,turris-omnia|\
kobol,helios4|\
solidrun,clearfog-base-a1|\
solidrun,clearfog-pro-a1)
platform_do_upgrade_sdcard "$1"
@ -46,6 +48,7 @@ platform_do_upgrade() {
platform_copy_config() {
case "$(board_name)" in
cznic,turris-omnia|\
kobol,helios4|\
solidrun,clearfog-base-a1|\
solidrun,clearfog-pro-a1)
platform_copy_config_sdcard

@ -51,6 +51,20 @@ define Device/globalscale_mirabox
endef
TARGET_DEVICES += globalscale_mirabox
define Device/kobol_helios4
DEVICE_VENDOR := Kobol
DEVICE_MODEL := Helios4
KERNEL_INSTALL := 1
KERNEL := kernel-bin
DEVICE_PACKAGES := mkf2fs e2fsprogs partx-utils
IMAGES := sdcard.img.gz
IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
SOC := armada-388
UBOOT := helios4-u-boot-spl.kwb
BOOT_SCRIPT := clearfog
endef
TARGET_DEVICES += kobol_helios4
define Device/linksys
$(Device/NAND-128K)
DEVICE_VENDOR := Linksys

@ -0,0 +1,28 @@
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -15,6 +15,13 @@
model = "Helios4";
compatible = "kobol,helios4", "marvell,armada388",
"marvell,armada385", "marvell,armada380";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
memory {
device_type = "memory";
@@ -70,10 +77,9 @@
system-leds {
compatible = "gpio-leds";
- status-led {
+ led_status: status-led {
label = "helios4:green:status";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
default-state = "on";
};

@ -0,0 +1,10 @@
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -68,6 +68,7 @@
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
+ select ARCH_WANT_LIBATA_LEDS
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.

@ -0,0 +1,28 @@
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -15,6 +15,13 @@
model = "Helios4";
compatible = "kobol,helios4", "marvell,armada388",
"marvell,armada385", "marvell,armada380";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
memory {
device_type = "memory";
@@ -70,10 +77,9 @@
system-leds {
compatible = "gpio-leds";
- status-led {
+ led_status: status-led {
label = "helios4:green:status";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
default-state = "on";
};

@ -0,0 +1,10 @@
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -68,6 +68,7 @@
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
+ select ARCH_WANT_LIBATA_LEDS
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.
Loading…
Cancel
Save