lantiq: fix switch configuration for EASY80920

The device tree description misses some Ethernet ports and there was no
model specified for this board. In addition there was no switch
specific default configuration created.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

target/linux/lantiq/base-files/etc/board.d/02_network

@@ -157,6 +157,13 @@ WBMR300)
 		"2:lan:2" "3:lan:3" "5:lan:4" "4:wan:1" "6t@eth0"
 	;;
 
+EASY80920NAND|EASY80920NOR)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:3" "5:wan:1" "6t@eth0"
+	;;
+
 *)
 	ucidef_set_interface_lan 'eth0'
 	;;

target/linux/lantiq/dts/EASY80920.dtsi

@@ -266,13 +266,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0>;
-		mac-address = [ 00 11 22 33 44 55 ];
+		lantiq,switch;
 
-		ethernet@0 {
+		ethernet@4 {
 			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
+			reg = <4>;
+			phynmode0 = "gmii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
 		};
 		ethernet@1 {
 			compatible = "lantiq,xrx200-pdi-port";
@@ -280,11 +286,11 @@
 			phy-mode = "rgmii";
 			phy-handle = <&phy1>;
 		};
-		ethernet@2 {
+		ethernet@0 {
 			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
 		};
 	};
 
@@ -293,8 +299,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <1>;
-		mac-address = [ 00 11 22 33 44 56 ];
 		lantiq,wan;
+
 		ethernet@5 {
 			compatible = "lantiq,xrx200-pdi-port";
 			reg = <5>;
@@ -303,20 +309,6 @@
 		};
 	};
 
-	test: interface@2 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <2>;
-		mac-address = [ 00 11 22 33 44 57 ];
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phynmode0 = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
 	mdio@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;

target/linux/lantiq/dts/EASY80920NAND.dts

@@ -4,6 +4,8 @@
 /include/ "EASY80920.dtsi"
 
 / {
+	model = "EASY80920NAND - Intel EASY80920 Nand";
+
 	chosen {
 		bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
 	};

target/linux/lantiq/dts/EASY80920NOR.dts

@@ -4,6 +4,8 @@
 /include/ "EASY80920.dtsi"
 
 / {
+	model = "EASY80920NOR - Intel EASY80920 Nor";
+
 	fpi@10000000 {
 		localbus@0 {
 			ranges = <0 0 0x0 0x3ffffff>;