last minute bugfixes

SVN-Revision: 305

openwrt/package/openwrt/jffs2root.c

@@ -84,11 +84,13 @@ int main(int argc, char **argv)
     if (argc > 1 && !strcmp(argv[1],"--move")) {
       if (ptr->offsets[1] >= ptr->len) {
         printf("Partition already moved outside trx\n");
+#if 0
       } else if (ptr->offsets[1] & 0x0001ffff) {
         printf("Partition does not start on a block boundary\n");
+#endif
       } else {
 	init_crc32();
-	bzero((void *)((int)ptr + ptr->len), (size_t)(len - ptr->len));
+	//bzero((void *)((int)ptr + ptr->len), (size_t)(len - ptr->len));
         ptr->len = ptr->offsets[1];
         ptr->crc32 = crc32buf((void *) &(ptr->flag_version), ptr->len - offsetof(struct trx_header, flag_version));
 	msync(ptr,len,MS_SYNC|MS_INVALIDATE);

openwrt/package/openwrt/mtd.c

@@ -140,11 +140,7 @@ mtd_erase(const char *mtd)
 		 mtdEraseInfo.start < mtdInfo.size;
 		 mtdEraseInfo.start += mtdInfo.erasesize) {
 		
-		if(ioctl(fd, MEMUNLOCK, &mtdEraseInfo)) {
-			fprintf(stderr, "Could not unlock MTD device: %s\n", mtd);
-			close(fd);
-			exit(1);
-		}
+		ioctl(fd, MEMUNLOCK, &mtdEraseInfo);
 		if(ioctl(fd, MEMERASE, &mtdEraseInfo)) {
 			fprintf(stderr, "Could not erase MTD device: %s\n", mtd);
 			close(fd);

openwrt/package/openwrt/openwrt.mk

@@ -112,7 +112,7 @@ openwrt-mtd-clean:
 OPENWRT_JFFS2ROOT_SOURCE=package/openwrt/jffs2root.c
 OPENWRT_JFFS2ROOT_TARGET_BINARY:=sbin/jffs2root
 
-$(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY): 
+$(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY): openwrt
 		$(TARGET_CC) -o $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY) $(OPENWRT_JFFS2ROOT_SOURCE)
 
 openwrt-jffs2root: $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY)
@@ -160,7 +160,7 @@ SSTRIP=$(OPENWRT_SSTRIP_TARGET)
 
 linksys:	linksys-shared linksys-nvram linksys-wlconf
 
-openwrt:	linksys openwrt-mtd openwrt-trx openwrt-addpattern openwrt-jffs2root openwrt-sstrip
+openwrt:	linksys openwrt-mtd openwrt-trx openwrt-addpattern openwrt-sstrip
 
 openwrt-dirclean: linksys-shared-dirclean linksys-nvram-dirclean linksys-wlconf-dirclean
 

openwrt/target/default/target_skeleton/etc/preinit

@@ -8,8 +8,15 @@ if [ $(cat /proc/sys/reset) = 1 ] ; then
   while :; do { echo $(((X=(X+1)%8)%2)) > /proc/sys/diag; sleep $((X==0)); } done &
 else
   mount | grep jffs2 >&-
-  if [ $? = 0 ] && [ $(cat /proc/mtd | wc -l) = 6 ] ; then
-    jffs2root --move && reboot 
+  if [ $? = 0 ] ; then 
+    mtd unlock rootfs
+    [ $(cat /proc/mtd | wc -l) = 6 ] && {
+      echo 5 > /proc/sys/diag
+      mtd unlock OpenWrt
+      mtd erase OpenWrt
+      jffs2root --move
+    }
+    mount -o remount,rw /dev/root /
   else
     mtd unlock mtd4
     mount -t jffs2 /dev/mtdblock/4 /jffs

openwrt/target/jffs2/jffs2root.mk

@@ -44,11 +44,11 @@ jffs2root-dirclean:
 	rm -rf $(MTD_DIR)
 
 ifeq ($(strip $(BR2_TARGET_ROOTFS_JFFS2)),y)
-TARGETS+=openwrt-image
+TARGETS+=openwrt-jffs2root openwrt-image
 ROOTFS=jffs2
 JFFS2FLAGS=-a $(JFFS2_BLOCK_SIZE)
 
-openwrt-image:	openwrt
+openwrt-image: openwrt
 	@make jffs2root openwrt-code.bin TAG=W54G \
 	EXTRAVERSION=$(EXTRAVERSION)-JFFS2-4M JFFS2_BLOCK_SIZE=0x10000
 	@make jffs2root openwrt-code.bin TAG=W54S \