ramips: dts file cleanup

cleanup some inconsistencies in the dts files

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37783

target/linux/ramips/dts/MT7620a.dts

@@ -6,10 +6,6 @@
 	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
 	model = "Ralink MT7620a + MT7610e evaluation board";
 
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
 	palmbus@10000000 {
 		sysc@0 {
 			ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
@@ -63,14 +59,14 @@
 		status = "okay";
 		
 		port@4 {
-			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
+			compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
 			reg = <4>;
 			phy-mode = "rgmii";
 			phy-handle = <&phy4>;
 		};
 
 		port@5 {
-			compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
+			compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port";
 			reg = <5>;
 			phy-mode = "rgmii";
 			phy-handle = <&phy5>;

target/linux/ramips/dts/MT7620a_MT7610e.dts

@@ -6,13 +6,6 @@
 	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
 	model = "Ralink MT7620A evaluation board";
 
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
 
 	palmbus@10000000 {
 		sysc@0 {

target/linux/ramips/dts/RP-N53.dts

@@ -6,10 +6,6 @@
 	compatible = "asus,rp-n53", "ralink,mt7620a-soc";
 	model = "Asus RP-N53";
 
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
 	palmbus@10000000 {
 		sysc@0 {
 			ralink,pinmux = "spi", "uartlite", "wled", "ephy", "i2c";

target/linux/ramips/dts/WNCE2001.dts

@@ -3,8 +3,6 @@
 /include/ "rt3050.dtsi"
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
 	compatible = "WNCE2001", "ralink,rt3052-soc";
 	model = "Netgear WNCE2001";
 

target/linux/ramips/dts/rt3050.dtsi

@@ -1,7 +1,7 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
+	compatible = "ralink,rt3050-soc", "ralink,rt3050-soc", "ralink,rt3350-soc";
 
 	cpus {
 		cpu@0 {
@@ -29,12 +29,12 @@
 		#size-cells = <1>;
 
 		sysc@0 {
-			compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+			compatible = "ralink,rt3050-sysc";
 			reg = <0x0 0x100>;
 		};
 
 		timer@100 {
-			compatible = "ralink,rt3052-timer", "ralink,rt2880-timer";
+			compatible = "ralink,rt3050-timer", "ralink,rt2880-timer";
 			reg = <0x100 0x20>;
 
 			interrupt-parent = <&intc>;
@@ -42,7 +42,7 @@
 		};
 
 		watchdog@120 {
-			compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
+			compatible = "ralink,rt3050-wdt", "ralink,rt2880-wdt";
 			reg = <0x120 0x10>;
 
 			resets = <&rstctrl 8>;
@@ -53,7 +53,7 @@
 		};
 
 		intc: intc@200 {
-			compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+			compatible = "ralink,rt3050-intc", "ralink,rt2880-intc";
 			reg = <0x200 0x100>;
 
 			resets = <&rstctrl 19>;
@@ -67,7 +67,7 @@
 		};
 
 		memc@300 {
-			compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+			compatible = "ralink,rt3050-memc";
 			reg = <0x300 0x100>;
 
 			resets = <&rstctrl 20>;
@@ -78,7 +78,7 @@
 		};
 
 		uart@500 {
-			compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
+			compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0x500 0x100>;
 
 			resets = <&rstctrl 12>;
@@ -93,7 +93,7 @@
 		};
 
 		gpio0: gpio@600 {
-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+			compatible = "ralink,rt3050-gpio", "ralink,rt2880-gpio";
 			reg = <0x600 0x34>;
 
 			gpio-controller;
@@ -115,7 +115,7 @@
 		};
 
 		gpio1: gpio@638 {
-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+			compatible = "ralink,rt3050-gpio", "ralink,rt2880-gpio";
 			reg = <0x638 0x24>;
 
 			gpio-controller;
@@ -131,7 +131,7 @@
 		};
 
 		gpio2: gpio@660 {
-			compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+			compatible = "ralink,rt3050-gpio", "ralink,rt2880-gpio";
 			reg = <0x660 0x24>;
 
 			gpio-controller;
@@ -160,7 +160,7 @@
 		};
 
 		uartlite@c00 {
-			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+			compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
  
 			resets = <&rstctrl 19>;

target/linux/ramips/dts/rt3883.dtsi

@@ -202,7 +202,7 @@
 		status = "disabled";
 
 		port@0 {
-			compatible = "lantiq,rt3883-port", "ralink,eth-port";
+			compatible = "ralink,rt3883-port", "ralink,eth-port";
 			reg = <0>;
 		};